February 25th, 2010, 09:21 PM
Post Count Number #1
Resume CV : Chemical / process engineer
RAVI KIRAN DASARI
rkd4883 AT yahoo.com
OBJECTIVE :
To obtain a Full time position as an Engineer in a Pioneering Engineering Company or a Chemical Company that will enhance my practical knowledge and help me grow as an engineer.
SUMMARY :
Multidiscipline engineer with Masters Degree in Chemical Engineering. Over two years experience in plant process system design; performed calculations and evaluations for pump and piping systems; prepared drawings and documentation for refinery projects. A team player, have worked productively in group settings where high achievement is the goal.
PROFESSIONAL EXPERIENCE :
CHICAGO BRIDGE & IRON (CB&I) Houston, Texas Feb 2008 Feb 2009
Process Engineer :
- Assisted senior engineers in preparation and review of engineering packages for delayed Coker units for three major refinery projects.
- Performed pump and hydraulic calculations and using advanced software programs.
- Assisted senior engineers in the generation of PFDs and P&IDs. Consistently met standards and requirements for accuracy.
- Prepared data sheets for system control valves and flow elements.
- Prepared line list details for piping systems.
- Prepared P&IDs for FEED phase of delayed Coker unit.
- Assisted senior engineers to perform back checking of all P&IDs.
- Assisted in preparation of proposals for propane-propylene splitter systems. Performed simulation of design basis concepts, generated heat and material balance calculations using Pro-II/Provision.
PETRO PROJECT ENGINEERING : Houston, Texas Dec 2006 Dec 2007
Process Engineer :(Co-op)
- Assisted senior engineers in the design of a multi-product specialty chemicals unit for a large chemical plant.
- Ran simulations using ASPEN plus to develop material and heat balances.
- Performed design calculations to determine exchanger and tank size requirements; provided hydraulic calculations to establish pump capacity and specifications; assisted in generating PFDs and PIDs for the systems.
- Prepared ISA format instrumentation schedules
- Prepared valve list, line list, instrumentation list and pump specification sheets.
- Prepared bid specifications for vendors.
EDUCATION :
Master of Engineering in Chemical Engineering, Lamar University, Beaumont, Texas Aug 2005 Dec 2007
Bachelor of Technology in Chemical Engineering, J.N.T.University, Hyderabad, India
Graduated in top 5% Sep 2001 April 2005
TECHNICAL SKILLS :
Simulation software : Aspen, HYSYS, PRO-II, Aspentasc
MS Software Packages : MATLAB, Polymath and Ezsolver
Operating Systems : Windows (98, 2000 and XP)
PAPERS WRITTEN AND PROJECTS SUBMITTED :
- Aspen Plus and HYSYS Training
Developed steady state simulation model for Methyl Tertiary Butyl Ether production using Aspen Plus software.
Process optimized for specifications.
Cost of the project and savings established by Calculator
Developed steady state simulation model for Propylene Glycol using optimization and sensitivity analysis techniques on Aspen plus.
Ran steady state simulation on the production of Propylene glycol from Propylene Oxide and water using HYSYS. Worked on refinery module.
- Review of Bio-Reactor
A thorough review of the various types of bioreactors, their applications and uses was published as a project report. This project report was submitted in partial fulfillment of the requirements for the award of Bachelors degree.
February 24th, 2011, 11:18 PM
Post Count Number #2
Re: Resume CV : Chemical / process engineer
RESUME : (M.Tech)
PRIYANKA LAHOT (CHEMICAL ENGG.)
Email id : - priyankalahot AT gmail.com
CARRIER OBJECTIVE :
Seeking innovative & challenging career in the professionally managed organization to which my presence can make a value addition.
IT SKILLS :
Operating system : Office documents
Basics of computers
ACADEMICS :
- M .tech (Chemical Engg.) - 2011 D.C.R.U.S.T.Murthal pursuing
- B.TECH. (Chemical Engg.) - 2008 M.D.U, ROHTAK 72%
- 10+2 Science PCM - 2004 H.B.S.E. 68%
- 10th Science - 2002 H.B.S.E 72.3%
TRAINING & EXPERIENCE :
- Six weeks practical training at National Fertilizer Limited, Panipat in 2006& in 2007.
- As a trainee come to know about the production of Chemicals used in the Agriculture Sector.
- Six months dissertation work at Reliance Industries Limited, Vadodara Gujrat in R & D department.
PROJECT UNDERTAKEN :
PROJECT NAME : OFF SITE and Utility, & Urea plant
- In 2006, got utility & group of plants under this plant 6 plants come name of these are raw water, cooling tower, compressor house, effluent treatment, sulphur recovery, ion exchange plant.
- The main plant is effluent treatment plant. In raw water we just remove the suspended particles. In ion exchange plant, we polish the water by passing through ion exchange bed, and then send for the boilers. In cooling tower we just cool the water which comes from the boilers. In ETP we do the treatment of water through nitrification & denitrification.
- In 2007, I had allotted Urea plant. In Urea plant I come to know that how urea forms from raw materials like ammonia gas, carbon dioxide gas. Both gases are used in liquid forms. We simply compress these gases under high pressure & temp & finally from some chemical changes, we just recover urea.
MAJOR PROJECT : Designing of Kettle Reboiler through MAT LAB
- In this major project, I come to know that how can we design a kettle reboiler by going through steps to steps. What are the advantages, how it is better other than, heat load required, and physical prop., space required, height required, etc.
DISSERTATION WORK IN M.TECH-
LIQUID PHASE ADSORPTION OF C8 ISOMERS WITH FAUJASITE ZEOLITES
- In this project, I come to know that how the adsorption takes place in liquid phase with different isomers by using various adsorbents like NaX, NaY, BaX, BaY, KX, KY etc. I also come to know that which adsorbent we can use in a plant so that we can increase the capacity of the plant.
TRAITS AND ATTITIUDE :
- QUICK LEARNER, PATIENT, OPTIMISTIC, DISCIPLINED.
- EXCELLENT CROSS CULTURAL COMMUNICATION SKILLS.
- GOOD TEAM PLAYER
- PROTECTIVE AND SELF MOTIVATIVEED WITH THE ABILITY TO WORK INDEPENDENTLY.
INTERESTS AND HOBBIES :
- I DONT STICK TO ONE THING. I HAVE LOT OF HOBBIES.
Like watching serials, journey , talking on the phone , making new friends, singing, listening music soft & slow music , cooking etc.