Consolidated Contractors International Company Abudhabi : Welding Inspector

[Admin]

Consolidated Contractors International Company Abudhabi : Welding Inspector
Company Name: Consolidated Contractors International Company
Company Location: Abudhabi
Designation of the vacancy: Welding Inspector
Company E-mail for contact: jojijohn2009@gmail.com
Company Website: www.ccc.ae

Details of the job:
- Reviewing of material test certificates
- Preparation of Quality Assurance plan, inspection test plan and various types of QCP
- ISO clearance and box up
- Mechanical clearance for loop and testing like hydro test, pneumatic test, pad test and leak test.
- Checking all vent, drains, on line instruments as per drawings and standards.
- Supporting and alignment of structural, static and equipment for furnace.
- Preparation of QC documents.
- Visual inspection of equipment in internal trays and cleaning of vessels.
- NDE clearance.
- Co-coordinating with clients

[ogvenkat72@yahoo.com]

I was worked in ccic RGX,QCS project so i would like to apply this company

[Guest]

Ashraf Imam Khan
Health, Safety & Environment
e-mail : aikhan1972 AT yahoo.co.in
:aikhan1972 AT rediffmail.com
Curriculum Vitae
Overall Summary
Over 15 years working experiences in the field of construction, Infrastructure, maintenance and operation petroleum and petrochemical plants & Industries (civil, electrical & mechanical combined cycles) such largest & reputed prestigious projects together with (FLOUR,CCC,LG const,Hundai const,ABB,MITSUBISHI,SIMENS)
To complete IN KUWAIT SUBYA POWER PLANT, OLE FINE PLANT, EQUATE INDUSTRIAL & IN QATAR DUKHAN DEVELOPMENT QATAR PETROLEM phase
6, 7 & 8
Positions
1. As HSE MANAGER : 20th March 2007 to still continue.
2. As safety coordinator : 21st April 2005 to 15th March 2007
3. As safety engineer : 25th march 2002 to 20th April 2005
4. As safety site engineer : 20th march 2000 to 10th Feb. 2002
5. As senior safety officer : 11th Feb. 1998 to 15th march 2000
6. As safety officer : 6th Feb 1996 to 10th Feb 1998
Education; Training & Certification/Affiliations
- I.sc. science from Bihar education council
- HSE Diploma Engineering from Aligarh Muslim University
- N.C.C national cadet core training an Army
- OSHA – Occupational safety and health administration.
- HSC – Health safety commission.
- OES – Occupational exposure standards.
- HSWR – Health and safety welfare regulations.
- ODBH – Occupational diseases of biological hazard.
- OHSMS – Occupational health and safety management system.
- NASC – National access and scaffolding confederation.
- Fire fighting basic & advance – Kuwait & Doha Qatar
- Fist aid basic advance & professional training India, Kuwait & Doha Qatar
- Control of hazard energy
- Compressed gas safety
NEBOSH : (Having Program And Documents)
HAVING G C C DRIVING LICENSE VALID UP TO 2016
Seminar
- Safety awareness seminar
- Health and safety foundation
- Organizing for health and safety culture
I have successfully completed and qualified Qatar Petroleum Certificate OF H S E &
P T W my HSSD log#2724 ALSO Certify Training H2S/BA Training HS(D) log#3991
Movement control
- Movement of people and vehicles – hazards control.
- Movement of traffic control & sign rectifier.
- Work equipment hazards and control.
- Electrical hazards and control.
- Fire hazards and control.
- Construction activities hazards and control.
Knowledge and literacy
OSHA – Occupational safety and health administration.
HSC – Health safety commission.
OES – Occupational exposure standards.
HSWR – Health and safety welfare regulations.
ODBH – Occupational diseases of biological hazard.
OHSMS – Occupational health and safety management system.
NASC – National access and scaffolding confederation.
MY MOTTO
Safe work practice target 100% accident 0% & my goal is zero harm all day every day.
Work Experience Details
Company : NICC (National Industrial Contracting Company W.L.L Doha, Qatar)
Position : HSE PROJECTS MANAGER
- Prepare NICC health safety and environment policy program and procedures.
- Ensure client HSE procedure shall be implemented.
- Co-ordinate with client representative for coming HSE program.
- Ensure that a high standard is maintained on site in accordance with the company and client health safety and environmental policy and project health safety and environmental plane.
- Advise site management as to measures to be taken in the interest of health safety and environment and with project manager approval implement such measures.
- Ensure that monthly and weekly reports prepared.
- Advise the site management on legal and contractual requirements affecting health safety and environmental and welfare of the workers.
- Advise the site management on potential hazards on new contracts before work commences on the site health & safety and environmental organization.
- Advise the site management on changes in legislation and health safety and environmental practices.
- Ensure HSE policy and procedures are updated.
- Conduct induction training and other related to HSE.
- Ensure that all certificate records of equipment are well kept.
- Ensure the security of all facilities and workers.
Record Keeping
- Safety induction record.
- Tool box meeting record.
- Safety committee meeting record.
- Daily safety inspection record.
- Weekly safety meeting record.
- Monthly safety record.
- Manpower and man hour’s record.
Work Experience Details
Company : IMCO (Instruments Installation and Maintenance Company W.L.L Kuwait)
As safety coordinator
Position : As safety engineer

- Co-ordinate to all supervisor, foreman, permit receivers and managers that all safety procedures should always be followed before commencing and end of work.
- Prepare monthly safety task.
- Co-ordinate all safety crew, safety member, assistance officer and safety officer.
- Ensure all documentation (observation; near missed; incident) has been logged and documented for future references.
- Study and review the clients documents related to construction operation safety manual and guideline of the project.
- Ensure al check list (daily awareness and lifting gears inspection etc) that have been submitted at the end of the shift.
- Formulate work assessment and guidelines for all under below me safety crew, safety team & Safety officer before commencing to job allocation.
- Organize vehicle transportation for overtime and on call safety officer.
- Ensure that all safety recommendations shall be followed.
- Carries out daily survey to ensure only safe work methods are in operations; adequate manner, welfare and first aid facilities are properly maintained, approved tools should been used and must be sufficient.
- All safety guide lines and safety construction manual shall be co-ordinate with QA/QC prior to ISO.
- Provide safety awards for the best safety employee for his safe work practice & adequate manner.
- Conduct weekly safety walk through co-ordinate to all supervisors engineer and manager.
Work Experience Details
Company KCC (Kuwait Controls Company W.L.L Kuwait)
Position As safety site engineer
As senior safety officer
As safety officer
- Attends weekly and periodic meeting with client contractor.
- Inspect all permits that have been issued on site if it is commencing in accordance to the specific work task.
- Strictly implementing better house keeping.
- Prepare the man hour analysis, including first aid calculation of total incident rate
- Prepare daily and monthly report to be submitted to the head office and client safety department.
- Check and monitor all materials, equipment & tools as per quality and safety standard prior to issuance at site.
- Ensure that all employees will arrive on time on the site safety and create bus site allocation plan for proper arrangement.
- Handle site implementation of the company’s health safety and environment program.
- Closely monitor all hazardous activities such as hot work erection/dismantling works, crane/lifting operations and ensure that all relevant requirements are complied with.
- Conducts and attends periodic safety, security, health and environment meetings with clients and other contractors.
- Conduct documented pre-development safety orientation seminar with new hired site employees or mobilization to the project site.
- Conduct safety toolbox meeting every week at the start of work sifts with all construction staff and personnel.
Checked Record Keeping
Safe work plan (SWP)
Checked HSE work practices – manual
Checked safety action plan (SAP)
Checked job safety (JSA)
Checked personal protective equipments & Devices (PPE)

[dilipbeml04]

CURRICULUM VITAE
DILIP KUMAR
QC – PIPING/WELDING/TEST PACK/HYDROTEST/PNUEMATIC TEST/INSULATION INSPECTOR
E Mail : dilipbeml04 AT rediffmail.com,dilipkumarccc AT rediffmail.com
EDUCATIONAL QUALIFICATION
- Diploma in Mechanical Engineering- 2001-65 %
- S.S.L.C - 1996- 75 %
- NDT Level II (ASNT) in PT,MT,RT,UT
- CSWIP 3.1 (LEVEL II) WELDING INSPECTOR
PROFILE
- Over 9 years 9 months of experience in Quality Control field.
- Good Control over QC team.
- Conversant with project activities from fabrication to hand over.
CODES & STANDARDS FAMILIAR WITH
ASME SEC. IX, ASME B31.3, ASME 31.4, ASME 31.8, API 1104,
ASME SEC.V, ASME SEC. VIII, AWS D1.1 APPROVED QCP & ITP.
Experience :-
1) Worked with M/s. Consolidated Contractors International Company,Qatar(CCIC) as QC Inspector Piping,welding, Insulation,Test Pack,Hydro,Pneumatic test above & underground piping ,Oxygen service, equipment testing in PEARL GAS TO LIQUID PROJECT, QATAR.
Project associated : Client: QATAR SHELL & QATAR PETROLIUM.
Main contractor : JAPAN GAS CORPARATION (J.G.C), KELLOG BROWN & ROOT (K.B.R).
Responsibilities :
- Fabrication inspection of piping’s i.e. material verification, fit up & welding.
- Field Inspection activities as per ITP for CS, SS, LTCS & ALLOY.
- Coordinating and witnessing of all NDT activities & Heat treatment activities.
- Tool box talks for welder/ fitters.
- Co-ordination with client all quality issues.
- Preparation of DWR, Daily Inspection & Other Reports.
- Preparation of Material inspection reports.
- Visual inspection.
- Planning & monitoring of consumables storage, backing as per project requirement.
- Involved with Heat treatment process activities of C.S and Alloy steel.
- Test Pack review & line checking.
- Witnessing of hydro tests, oxygen service tests, equipment tests and Pneumatic tests above & underground piping’s.
- Inspection of hot insulation in various stages like surface preparation, insulation and sheet metal cladding.
2) Worked as Q.C. ENGINEER in M/s.Unitherm Engineers Limited, a leading manufacturers of Industrial Heat Treatment Furnaces in collaboration with M/s. ALD Vacuum Technologies, Germany, and leading manufacturers of Industrial Aluminum Melting Furnaces in collaboration with M/s. NIHON KOHNETSU CO.LTD, Japan, which is widely used in Automobile, Textile and Bearing Industries.
Major Customers are – M/s. MICO - Bangalore & Jaipur, Bajaj Tempo - Pune, TELCO, Ramon & Demn - Thane, Mahindra & Mahindra - Mumbai, LMW - Coimbatore, Kirloskar Toyoda Textile Machinery Ltd - Bangalore, Maruthi Suzuki -Delhi,Goetz(India)Limited-Bangalore & Faridabad.,Eicher Pune.
Period : Q.C.Engineer, From June 2006 to Dec.2008
JOB PROFILE :-
Testing of process & utility pipe lines, Final inspection of furnaces, In process inspection of furnaces, Checking of incoming materials like butterfly valves, check valves, globe valves, pipes & pipe fittings, gear motors, feed pumps, gear pumps, flow sensors, control valves,solenoide valves, heat exchangers,coolers,storage tanks, oil tanks,Pr.Gauges,Thermocouples & control panels, fit up & welding inspection, supplier and in-house audits, Value engg. activities, Handling of customer complaints, Documentation,callibration activities, checking of new development drgs, APQP,PPAP,FMEA,SQC,SPC and kaizen activities.
3) Worked as Quality Assurance Inspector in Essae Digitronics Pvt.ltd. which is ISO/TS 16949-2002 Company, leading Hub drive manufacturing company including TVS MOTORS,BAJAJ MOTORS,HERO HONDA , as its main customers.
Period : From September 2002 to MAY 2006.
JOB PROFILE :-
Inspection of incoming molding materials, inspection of mold paterns, inspection of trial runs of molding parts, inspection of molding Para meters in robotic molding machine, in process inspection & final inspection of various types of Hub drives.
4) Apprenticeship training at Bharath Earth Movers Limited, a Defense Public Sector Unit under Ministry of Defense, Bangalore Complex.
Period of Training : September 2001 to September 2002.
JOB PROFILE :-
Final Assembly of Rail Coach, Rail bus, Rail wagons, Tatra trucks, Incoming inspection of TATRA Truck parts, in process inspection, final inspection of Truck, Rail wagons, Rail coaches.
COMPUTER KNOWLEDGE :_
- PIPING DESIGN & MANUFACTURING SYSTEM (PDMS).
- UNIGRAPHICS. NX 3
- AUTOCAD 2008.
- MS OFFICE.
- MS WORD.
- MS EXCELL.
- MS POWER POINT.
TRAINING UNDERGONE :-
- Working at Height.
- Confined space entry.
- Lifting & rigging.
- Emergency response.
- Hand safety & manual handling.
- Non destructive examination.
- Hydrogen Sulphide awareness.
- Defensive driving.
- Hazards identification.
- Mechanical joint integrity.

[Guest]

RESUME
VINODCHANDRA I PATEL
Email ID : Vinodchandra.ipatel234 AT gmail.com

Profession : QA/QC Welding Inspector (Piping)
AWS ( CWI)&Saudi Aramco approved Welding Inspector.

Career Objective :
1) To have a challenging career in the field of Pipeline, Pressure vessel, and Piping construction engineering in Refinery, Petrochemical and Oil &Gas Industries.
2) To work in challenging and motivating environment, where creative and analytical skills contribute in a major way towards the growth of the organization that offers me an opportunity and professional growth.
Educational Details : Diploma Mechanical Engineering completed in 1983

Technical Qualification : a) ASNT Level- II ( UT, RT, MPT & DPT )
b) Passed AWS, CWI,Certificate. No.10022571( Certified Welding Inspector).
c) Aramco Approved Welding Inspector
Work Experiences : India, K.S.A,
Computer Awareness :- M-S office, Excel, Windows XP

Salary Drawn : 1 lac Rs. Per Month ( Indian rupees), 8000 SAR PER MONTH
Expected salary : Negotiable

PROFESSIONAL SKILLS / PROFILE :-
- A comprehensive background In,
- Various Welding processes (SMAW,GTAW,FCAW, SAW & GMAW), Various NDT methods
( RT / UT/ DPT/ MPT/ VT), Inspection activities and documentation related to Piping Construction,
Installation, as per Isometric drawing, P&ID, PGID & International Codes/Standards, Specifications.
- Inspection activities and documentation related to Piping, Pressure vessels, Heat Exchanger, Reactors,
Storage tanks etc.
- Knowledge of preparation of & Review of,
- WPS (Welding procedure specification), PQR(Procedure qualification records), WPQ(Welder
performance qualification),
- Well conversant /acquainted with various International Standards /Codes viz. ASME sections- II,
Part A, B, C, section V, VIII, IX, Piping code ASME B31.3, API 1104,
- Projects have included fabrication of Pressure vessels, Heat exchangers, Columns, Reactors, &
Piping Constructions & structure for utilities. Clients have included major refinery, Oil
& Gas companies, Petro-chemical, Fertilizer, and Pressure manufacturing Industries. They have
included monitoring , checking, & supervising welding procedure qualification test, welder
performance qualification test, in-process production welds ( SMAW, GTAW, SAW, FCAW
GMAW), full traceability of materials & consumables , QA/QC plans & Procedure, full dimensional
survey, NDT & Destructive Testing, vendor third party, control of multi disciplined / national
workforces (supervising other Inspectors, NDT personnel, and work crews ), safety procedures, Test
pack / Dossier/ documentation, preparation record keeping, working with computerized systems,
personnel review plus product completion reviews & sign off.
- Able to motivate & co-ordinate other personnel into achieving quality accepted targets with
clients & theirs representatives ( Lloyds, TUV, BVIS,BARC, NPC, IGCAR, etc.), plus other
departmental personnel.
- Welding consumable calculations & control ( Storage & Handling).
- Monitoring welding & its related documentations , activities to prevent the occurrence of Non
Conformity.
Summary of Major Job experiences
More than 15 Year’s experience,
* In the field of QA/QC Welding Inspection activities related to Piping construction & installation, Pressure
vessel, Heat Exchanger, Storage Tanks, Column,
* Witnessing & Inspection of Non Destructive Testing required for Oil & Gas, Petrochemical, Refinery, Nuclear,
Fertilizer plant in Middle East & India.
Present Employer
# Company : Abdul Rehman Ali Al-harthi Est.
Main contractor : Latifia Trading & Contracting Company
Client : Saudi Aramco
Position : QA /QC Welding Inspector (AWS/CWI certificate No.10022571)
Duration : April 2010 to Till.
Project : CORPORATE DATA CENTRE (HVAC Plant Piping)
Location : Dhahran / Dammam, (Kingdom of Saudi Arabia-KSA)
Previous Employers
# Company : M/s Granger Engineers & Consultants (P) Ltd.
Client : Reliance Industries Ltd.
Position : QA / QC Piping & Welding Inspector
Project : JAMNAGAR EXPORT REFINARY PROJECT (JERP)
Duration : September, 2009 to March, 2010
Location : Jamnagar
# Client / Company : RELIANCE ENGINEERING ASSOCIATES LTD.
Position : QA / QC Piping & Welding Inspector
Project : JAMNAGAR EXPORT REFINARY PROJECT (JERP)
Duration : March 2007 to August 2009
Location : Jamnagar
# Company : Nawaz Construction Co. Sikka, Jamnagar, Gujarat
Client : Reliance Industries Ltd.
Position : QA / QC Piping & Welding Inspector,
Project : Modification, Repairing, and Shut down of Jamnagar Refinery plant
piping,
Duration : April 2001 to March 2007.
Location : Jamnagar
Work Involved:

- Review Isometric drawings, P&ID, Plant lay-out drawings.
- Review of EPC Contractor’s and sub Contractor’s approved Project Quality Plan as per Code / Specification requirements.
- Review of approved contractor's quality control procedures and Inspection and test plans (ITP) as required for construction activities and project specification.
- Monitor the implementation of quality management system in project execution. Oversee the work of the Quality Control and field inspectors to ensure effective planning and execution of all QC activities and co-ordinate day-to-day QC activities.
- Verify the Quality performance of the EPC Contractor and sub-contractors.
Quality Surveillance inspection on Contractor's project execution during different phases of execution.
- Ensure verification of inspection performance by: conducting regular inspections, verification of corrective actions, verification of 3rd party NDE subcontractor's performance, review of inspection records and welding records.
- Review of contractor's quality dossier.- Support field engineering.
- Inspection of raw materials Correlated with Test Certificate.
- Review/approve Hydro test package and witness Hydro test.- Review of welding and NDE status, weekly and monthly reports.
- Responsibilities as Welding Inspector Review of approved the Procedure Qualification Record (PQR) as per ASME Sec IX / ASME B31.3 and project specification.
- Provide training and technical guidance to inspection personnel.- Reviews weld, PWHT records and statistics.- Inspection of raw materials Correlated with Test Certificate
- Surveillance Inspection under production - Monitoring and preparing Progress report
- Coordinating with project inspection team and Project Management Team Evaluation of NDT film Hydro Test package preparation and witness Air pigging, gauging and Hydro Test in plant piping and pipeline.- Preparation of Daily NDT status, daily, weekly and monthly reports.
.
Job Responsibilities:
WORK INVOLVED PRIOR TO PERFORMING
(a) Piping Inspection & (b) Welding Inspection:
- Review of,
- applicable documents such as contracts, drawings ( Isometric, P&ID, plant lay out etc.), codes/ standards,
specifications, vendor requirements and project agreements on work to be inspected.
- project procedures and / or the contractor quality plan to determine requirements prior to starting any
activities.
- Inspection Test Plan to determine what is required to be inspected, frequency & and method of
inspections required.
- Verification / Checking that / of,
- all approved design drawing including any approved changes associated with the work to be
inspected.
- Welding Procedure Specifications (WPS), Procedure Qualification Record ( PQR), NDT procedures,
copies of acceptance criteria are approved for use and available of the same at the site,
- which forms or documents must be completed to document field inspection activities,
- availability of NDT matrix showing the NDT procedure to be used, all the required resources like
oven, thermo chalk, tongue tester, all required electrodes, and argon cylinders,
- welder are qualified for welding for required position & welding process,
- quality and condition of base & filler materials to be used,
- storage condition / stock status of the material to be used,
- welding machines, flow meters, regulators, & support tools for welding activities are in good
working condition,
- pipe classes are identified as per Isometric,
- weld edge preparation, joints fit-up, adequacy of alignment of devices are as per requirement, no
rust, burns, slag, grease, paint, moisture or other foreign materials are present on joint prior to
welding.
- root opening do not exceed specified tolerance,
- members are tacked / hold together are in specified joint configuration prior to welding,
- an adequate shrinkage allowance is made so that distortion will not result,
- Preheat is applied prior to welds as per approved WPS,
- Establishment of drawing control system to issue / receive the latest revision of drawing and dispose
the obsolete drawing,
IN PROCESS (a) Piping Inspection & (b) Welding Inspection :
- Verifying / Checking / monitoring / Witness/ Inspection of / that,
- only approved materials / consumables have been used.
- all works are performed as per applicable welding codes / standard as required by the project
specifications.
- welding variables for compliances with welding procedures.
- type and size of welding rods used as per approved WPS.
- welder assign to work are qualified for the position and process.
- un-used welding rods ( which are recommended for backing / drying ) which have been exposed to
the atmosphere are returned to oven for re-drying before re-use.
- new welding rods that have been wet are not to be used.
- loose rods ( which are recommended for drying / backing) are stored in holding oven until
withdrawing for use.
- welder performance qualification test, all weld test and its documentation.
- placement and sequences of individual weld passes, quality of individual weld passes, inter-pass
cleaning, and inter-pass temperature.
- all low hydrogen electrodes are properly backed or not.
- In case of Impact requirement, heat input is measured.
- DPT material set is from single manufacturer.
- in-process NDT ( RT, UT, DPT, MPT ), and interpretation / evaluation of the same as per
acceptances criteria of applicable codes / standards.
- for FPW joint, proper back-gouging of root to sound metal prior to second side welding as when
required.
- post weld heat treatment, post heating, if required & maintain its documents.
- butt weld / groove weld for excessive or insufficient reinforcement, excessive weaving, for weld
size & weld length.
- fillet weld for leg, throat size & weld length.
- dimensional accuracy of weldment.
- additional NDT, PWHT, if required.
- defects such as undercuts, overlaps, slag inclusion., & exposed porosity ( Visual inspection ).
- finished weld appearances.
- prepare detailed welding reports.
- Inspection activities for different type of Incoming materials like C.S, LAS, LTCS, stainless steel,
Nickel.
- Inspection of daily fit up, weld visual inspection as per the Isometric Drawing,
- Inspection of mechanical installation and construction requirement like valves, supports, fittings,
and other necessary items prior to re-installment as per latest approved drawings.
- Establishment of control to ensure that correct materials have been used which can not be visually
verified / inspected after installation.
- Inspection of PMI checking for LAS and stainless materials to avoid mixing of different materials.
- Inspection of thickness checking of tubes / pipes to mixing of different thickness, hardness
checking.
- Checking the key dimensional requirements including location, size of tolerance, spacing & other
key dimensions for the installation.
- Checking inspection verification testing such as torque test, Pressure test , various NDT testing and
ensure that properly controlled and calibrated material & testing equipment ( M & TE ) devices for
the same are used.
- Documentation of all inspections as per ITP requirements on approved formats.
- Inspection of line as per approved Hydro test package and preparing punch point.
- Dossier and Test pack & Quality documents preparations for piping.
- Review of Hydro test package ,inspection activities for line checking for mechanical clearance & punch
listing.
- Review of calibration certificates of various instruments like pressure gauges, Ultrasonic thickness
meters, Densitometer for RT films which are to be used as testing equipments.
- Conducting an inspection for hydro test / leak test along with the client representative.
- Involved in reinstatement and master Punch listing.
- Inspection of coating and painting activities preparation of documents.
- Preparation of reports for client submittal.
- Coordination with the client/consultants to maintain the quality to move the project smoothly.
1st January 1996 to 31st March 2001
- Employer: Worked with a leading steel fabrication company M/S Fibre Steel
Fabricators at Baroda , dealing in the manufacturing of Pressure Vessels , Heat
Exchanger , Reactors , Process Equipments , etc. in carbon steel and stainless steel
- Designation : Sr. Q.A / QC Inspector ( Petrochemical
equipment- Pressure vessel. Heat exchanger, Storage tank, etc)
- Duties & Responsibilities :

- Incoming raw material inspection, identification, and testing if required as per Codes / Standard and
technical specification of clients and maintaining Traceability of all materials during project.
- Inspection of all works in progress ( such as joint fit-up, weld visual, level check, Non-destructive
testing ( RT, UT, DPT, MPT ), conducting mechanical clearance, control of non-conformities,
Hydro testing, Box-up and painting as per Inspection test plan.
- Preparation & maintaining records of WPS, PQR, & WPQ.
- Coordinating with Third Party Inspection agencies / Client Representatives.
- Well conversant with International Codes / Standard such as ASME section II, Part A, B, C, Section
III, IV, VIII, IX.
- Review, Interpretation & Evaluation of Radiographs & maintaining its documentation.
- Preparation & maintaining documents and records as per ISO formats.
- Inspection of surface preparation, sand blasting & painting of vessels.
- Final dimension checking / inspection.
- Resolving all pending issues, obtaining Release note and giving clearance for dispatch.
1st April 1993 to 31st Dec 1995
- Employer : M/s Pakona Engineer ( India) PVT. Ltd
Makarpura, Baroda-Gujarat. ( Packaging machine manufacturing company )
- Designation : Mechanical Engineer.
- Duties & Responsibilities :
- Drawing review & preparation of production planning bar chart as per production schedule
- Identifying of raw materials & bought out items required for job.
- Preparing planning for every equipment schedule in the most efficient & economic manner.
- Co-ordination & expediting of various departments to follow the schedule
for processing items/ parts of jobs , preparation of Job cards as per manufacturing
process such as Hacksaw cutting, Machining, Drilling, Milling, Shaping, Boring,
Fabrication Etc. & the cards distribution to different departments.
- Sub-vendor development, rate finalization of parts/Items before job order placing to vendors.
- Machine wise /Job wise production planning chart preparation & Updating, indicating
day to day status of each & every Items/Parts.
PREVIOUS EXPERIENCES :-
# Company : M/S Himalaya Machinary Pvt. Ltd - A reputed Plate Forming, Rolling, Shearing and
press brake machine manufacturing company. At Baroda as Mechanical engineer From
Duration : 10th July-1991 To 31st March- 1993.
Position : Sub-Contract Engineer
Location : Makarpura, G.I.D.C. Baroda,
# Company : M/S SPECTOMS - A reputed cattle feed plant equipment manufacturing company.
Duration : 1st July 1986 To 7th July-1991.
Position : Planning Engineer
Location : Makarpura, G.I.D.C. Baroda,
# Company : M/S PRECISION BEARING INDIA LTD. - A large reputed different type of Taper
roller, Ball & Bearing manufacturing company.
Duration : 26th July1985 to 25th Jan.1986.
Position : Sectional Engineer
Location : Makarpura, G.I.D.C. Baroda,
# Company : M/S ANTIFRICTION BEARING COMPANY LTD.- A large reputed different type of
Taper roller & Ball Bearing manufacturing company.
Duration : 14th June 1983 To 19th July1985.
Position : Trainee Engineer
Location : Bharuch, Gujarat,

[jejornair]

JEJO.R
POSITION : QA/QC INSPECTOR
FIELD : OIL, GAS, POWER, PETROCHEMICALS & REFINERIES.
Mail : jijo.r.nair AT gmail.com
OBJECTIVE
To provide support to the Company's Quality Inspection and Project Management and deliver effective
Technical and administrative Inspection Co-ordination services in accordance with Codes and Standards.


ACADEMIC QUALIFICATION

Graduation Institution Board/University Duration Percentage
Post Graduate Diploma in StrategicManagement& Leadership College Of Central London, United Kingdom BTec/Edexcel 2010-2011 Pass
Master of Science (physics) National college.
Trichy. Bharathidasan University 2003-2005
71%
Bachelor of science
(physics) Nesamony Memorial Christian College.
M.S.University Tirunelveli 2000-2003 61 %

CERTIFICATE COURSE
1. AWS-QC-1 (CERTIFIED WELDING INSPECTOR) - Certificate no : 08093191
2. TWI-CSWIP 3.1 –Certificate no : 42786
3. BRITISH SAFETY COUNCIL AWARDS LEVEL 1
(HEALTH AND SAFETY)

4. ASNT-SNT-TC-1A (LEVEL-II)
- RADIOGRAPHY TESTING
- ULTRASONIC TESTING
- MAGNETIC PARTICLE TESTING
- PENETRANT TESTING
WORK EXPERIENCE IN OVERSEAS
Worked as a QA/QC Welding Inspector in M/s Punj Lloyd LTD, Abudhabi From Feb 2009 to Dec 2009. Gathering stations, lines and flowliness, gas and crude processing plants. Gas processing from wellhead to finished product including transportation, gas liquid separation and treatment, liquid recovery and fractionation, compression and liquefaction, LNG storage and regasification.

1. Project : Borouge 2 Project (U&O and External Interconnections)
Owner : Abu Dhabi Polymers Company Ltd (BOROUGE)
Client : Technicas Reunidas
Period : Oct 2009 to Dec 2009
2. Project : OGD 111 Onshore Gas Project
Owner : Abu Dhabi Gas Industries Ltd (GASCO)
Onshore Gas Development Phase III (OGD - III)
Client : Eastern Bechtel Co Ltd
Period : Feb 2009 to Sep2009

2. Worked as a QA/QC Inspector in M/s Al-Suwaidi Industrial Services Ltd, K.S.A in a Mechanical Erection of Utilities&Offsite, Macchi boilers – Fabrication, Erection, Testing and Commissioning for Yanbu Petrochemical Complex U & O Project
Owner : Yanbu Petrochemical Company (SABIC)
Client : M/S.Flour Arabia Limited Contract A21T
Project : Yansab U&O Project - K003
Duration : April 2007 to February 2008
WORK EXPERIENCE IN INDIA
3. Working as a QC Inspector in M/s BARAKATH ENGINEERING INDUSTRIES Pressure vessel Fabrication for BHEL. Fabrication, Inspection, and Testing.
Owner : BHEL-Trichy
Contractor employed to carry out the work : M/s Barakath engineering industries
Duration : June 2003- March 2007
JOB RESPONSIBILITY
- Monitoring the implementation of Contract Quality Plan for the Project in liaison with Site
QA/QC Manager.
- Preparation of ITP, Test-packs and SERs/Waiver/FORs NCRs, CARs, Hydro-testing and recording, flushing of pipelines and Line test.
- Welder’s qualification – preparation of WPS & PQR, welder qualification test witnessing the Test with regulatory bodies.
- Inspection of Complete piping works-Pre heating, Spool fabrications, stage and final Inspection of welding, NDT, Hydro test of spools and recording.
- Field welding and Erection, NDT, Post weld Heat treatment, PMI and recording.
- Conducting Line Test and witnessing with Clients and Regulatory bodies.
- Patrol and final inspection of welding
- Co-ordinate with the other departments to get work done as well as scrutinizing the contractors to finish the work in schedule and in quality.
- Conducting load test for all lifting equipments.
- Executing NDT and Destructive testing, incoming material inspection and making traceability records & final testing.
- Ensure that the interpretation of radiographs to acceptable standards.
- Liaising with clients / Regulatory bodies and getting approval.
- Final Documentation and Traceability records.
- Familiar with Isometric, P&ID, GAD, Equipment & Structural.
- To ensure the welding consumables & Equipments as per QC procedure.
- Maintaining the records of calibration, inspection and testing equipment as per the Quality Management System Procedures lay down.
- Responsible for verification of calibration status of Inspection, Measuring & Test Equipment (IMTE).
- Involved also in clearing punchlist item “A” as a prerequesite to be completed before hydrotest
- Responsible on initiating additional re-instatement punchlist, and clearing all completed item “B” punch together with client QC and owner rep. QC before final sign off.
- Initiate punchlist and non conformance report if required
- Conduct line checking and punchlisting before hydrotesting and flushing
- Conduct visual pneumatic test and hydrostatic test.
- Witness final installation of valves spectacle blind and all types of components concerning piping

COMPUTER PROFICIENCY
Operating Systems : Windows 98, 2000, XP & Vista.
Software Packages []: MS-Excel, MS-Word, MS-Power point, & Internet Packages, Auto Cad 2000

[Guest]

I were employee ccic project H.N.R.P, KGP Saudi Arabia and GTL Doha Qatar as a post of an instrument tech. I like ccic. i need job in ccic

[Guest]

Do you have any insulation&cladding s.v (or) permit receiver (or) permit co-ordinater vacancy?