Resume CV : Production Management/ Process/ Production planning/Vendor development

[manishnamarata]

MANISH GUPTA
E-Mail : itsnomymanish AT yahoo.co.in

JOB OBJECTIVE :
Seeking assignments in Production Management/ Process/ Production planning/Vendor development with an organisation of repute

PROFESSIONAL SYNOPSIS :
- 7 years of experience in Production, Process & Quality assurance Management.
- Currently designated as Sr. Engineer – Production, Process & Quality assurance - Optical media group with Moser Baer India Limited, Greater Noida, involved in monitoring the overall operations of the production.
- Proficient in production and process planning, Production Planning and manpower deployment.
- Knowledge of Systems Kaizen, TPM, Lean Manufacturing And 5’S’
- Working experience in ERP envirenment.
- Excellent and proven Leadership, Relationship Management, Analytical & Communication Skills.
- Bachelor of Engineering (Electrical) with 1st division With Distinction from Jiwaji University in 2000.

CORE COMPETENCIES :
Production Management :
- Heading a Production shop (consisting 5 engineers and 50 Workman) responsible for production.
- Planning day-to-day activities, production schedules and work allocation for achieving of monthly production targets by optimum use of available resources.
- Monitoring and Controlling shop operation efficiency – OEE, Man-hour, Downtime, Production Plan vs. Actual and Delivery Performance.
- Monitoring and Controlling cost reduction activities to keep all input.
- Monitoring and controlling product quality –Rejection, Rework rate, SPC and Customer complaints.
- Machine and Equipment selection, negotiation, ordering and finally installation and commissioning.
- Participate in TPM pillar activities.
- Drive TPM at associate level and attain TPM goals.

Quality Assurance & Control :
- Conducting Pareto Analysis, following SPC/ SQC and 5S for ensuring requisite quality as well as establishing quality standards.
- Implement and maintain the quality system ISO9002, OHSAS-14001 COMPANY, IMS.
- Identify areas of quality failures and take steps to rectify them.
- Implementation of KAIZEN, 5-S and Mistake proofing activities.

ORGANISATIONAL EXPERIENCE :
Worked with HOTLINE CPT LTD., Malanpur Dist. Bhind as Asstt. Engineer from May 2003 to Sept. 2005 in production of Colour Picture Tubes. It is the second largest CPT manufacturing company manufacturing 21” and 14” CPT’s.

Accomplishments :.
- Holds the distinction of minimizing customer complaints by implementing mistake proof Systems.
- Played a major role in completing the first three S of 5’s.
- Initiated restructuring of plant layout to eliminate unwanted delays and improving productivity.
- Merit of achieving the overall improvement in productivity levels significantly by 10% to 25%.
- Played a key role in undertaking modification of conveyers to introduce single piece flow by line balancing method.

IT SKILLS :
- C & C++
- MS Office

TRAINING :
- Causality analysis. (7 QC Tool)(Yellow Belt)
- Lean Manufacturing From LEAN PLUS.
- TPM (Total Productive Maintenance)
- 5S, POKE YOKE

PERSONAL DETAILS :
- Date of Birth : 20th August,1977
- Alternate ID : talktome_mg AT yahoo.co.in

Date : (Manish Gupta)

[Guest-IJT]

QA- Manager

K.THANGARAJ
E-mail : thangaraj_kv AT yahoo.com

Career Aspiration :
Desire to work in a company that uses my knowledge, talent, hard work, dedication and sincerity in a well manner. I am looking for the great opportunity as a production engineer that offers me challenging assignments, professional development and career growth.

Professional Experience :9 Years

Work Experience :
Company : M/S Majees Lighting Industries LLC, Sohar Industrial Estate, Oman.
Designation : Production & maintenance Engineer
Period : August- 2010 – August 2010
Role & Responsibilities - In process (Assembly) Production
- Preparing and implementing action plans effectively to maximize overall equipment efficiency of production machines.
- Distribution of work load to operators in order to achieve daily production target.
- Planning day to day production to achieve maximum production.
- Supervising hourly production.
- Utilization of manpower accurately.
- Troubleshooting and solving technical problems.
- Organizing daily work at shop floor.
- Handling skilled manpower and administration of shop floor.
- Ensured proper housekeeping and coordinating with workers.
- Simultaneously working towards productivity and quality improvement.
- Record preparation of tool history coordinating with purchase, planning, stores, tool room.
- Removing useless work.
- Preserving discipline according to safety rules.
- Implementation of safety audits, 5'S.
- Organizing quality circles in department.
- Development of operator through multi skill.
- ERP user.
- Conducting continuous improvement projects.
- Encouraging activities for new product development.
- Checking machines daily.

Work experiences :
Company : M/S Balaji CNC Machining Centre, Coimbatore-06
Designation : Production planning & quality assurance – Manager.
Period : Feb 2007 to July 2010
About the company :
They are machining automobile components the customers are M/s pricol ltd, M/s Roots cast pvt ltd, M/s Jana tics India pvt ltd, & M/s partta industries, USA.
Role & Responsibilities - Machine Shop floor- Quality Assurance - Manager
- Preparing and implementing action plans effectively to maximize overall equipment efficiency of production machines.
- Distribution of work load to Quality inspectors in order to achieve daily dispatch target.
- Supervising hourly inspection reports.
- Arranging, repairing and measuring instruments.
- Utilization of manpower accurately.
- Troubleshooting and solving technical problems.
- Organizing daily work at shop floor.
- Handling skilled manpower and administration of shop floor.
- Ensured proper housekeeping and coordinating with workers.
- Supplier & New Parts Development & Inspection
- Responsible for PPAP Audit, Improvements.
- Responsible for Inspecting Incoming Parts as per Drawing and Raw Material.
- Experienced in Preparing Inspection Layout, AOI (Agreement of Inspection) for Supplier.
- Making final Inspection reports.
- Responsible for giving First of Approval of Supplier Products.
- Experienced in Calculating, Monitoring the Rejection / Analysis Through Supplier Rating.
- Collection of day wise Rework and Rejection Items, analysis of the Same and Taking Corrective and Preventive Action to Reduce Rejection.
- Resolving and Corrective Action Taken for Customer Complaints through G8 D Report
- Inspection of Supplier Parts as per Plan and Maintaining the Record
- PPAP Documents Preparation and Submitted to Customer
- Responsible for conducting internal quality ISO audit for every three months.

Training Undergone :
- GD&T, PPAP, 7 QC Tools
- FMEA, Control Plan & 5 ‘S
- ISO/TS 16949

Work experiences :
Company : M/S IMAGE CAD systems, Chennai
Designation : Design Engineer
Period : March 2005 to Sep 2007
About the company :
They are doing project out sourcing to L&T demag, ford etc.
Role & Responsibilities – Design engineer.
- Design Experience with the use of technical Tools like Proe wild fire2.
- Developing Backend support to the Design Data by using Wrench Product Data Management tool.
- Created master Bill of Materials for the entire machine with options and alternates.
- Provided the necessary changes in the Bill of Materials as per the requirement from the customer using the Economic Change Order.
- Customization of the master Bill of Materials to the standard Bill of Materials as per the machine requirement.
a) Project Title : - Designing of ASWA 350T Long stroke
About the project :-
Existing 350T Clamping unit is designed to have the stroke of 675mm and there is a need of increase in stroke by another 105mm as per the requirement from the customer for the special moulds to accommodate.
b) Project Title : - Design of Extended Mould Height by 100mm for 160T Clamping Unit.
About the project :-
The objective is to increase the minimum and maximum Mould height of the 160T Clamping Unit by 100 mm from the existing 300mm and 600mm respectively.
The increase in the Mould height effects in the increased length of Tie bars and Clamping Units mounting area on the base and its Cladding.
The Project helps in increase the Mould height permanently after the machine is installed in the customer’s end. This also helps to study the possibility of increasing in mould height of the other Models.

Work experiences
Company :M/S Star wet grinders in pump division, Coimbatore.
Designation : Production and planning engineer.
Period : August 2001to Feb 2005
Role & Responsibilities – Production and planning engineer.
- Responsible for planning the production as per the orders received from the customers.
- Tacking action for the availability of the raw materials and the other resources for production.
- Responsible for inspection of Raw materials, Accessories, Outsourced Processed Items like Impellers, Casing, etc.
- In charge for the Assembly of pumps from (1 HP to 5 HP) as per the planning schedule.
- Responsible for final inspection before dispatch.
- Responsible for handling the customer complaints and taking corrective and preventive actions.
- Responsible for change in planning schedule due to seasonal changes.

Qualifications :
- BACHLOR OF ENGINEERING - MECHANICAL (1998-2001), Bannari Amman institute of technology, Sathyamangalam affiliated to Bharathiar University, Coimbatore.
- Diploma in Mechanical Engineering (1995-1998), Kongu Polytechnic, Perundurai affiliated to Department of Technical Education – Chennai.

Technical skills :
- PRO/E Wildfire 2.0
- Wrench (It’s a product data management tool, in the tool complete detail of all the product of the machine is stored with option and alternates).
- AUTOCAD
- I-DEAS(Foundation level)
- MS Office.

Personal Details :
DOB : 03/02/1976
Marital Status : Married
Height : 172 Cms
Weight : 78 Kgs

Declaration :
I hereby declare that the information furnished above is true to the best of my knowledge and belief.

[Unregistered]

RESUME
NAME : RAM KISHA
EMAIL ID :ram_kishan2011 AT yahoo.com
FATHER,S NAME : SHRI RAM DHANI
NATIONALLITY : INDIAN
DATE OF BIRTH : 10/03/1969
MARITAL STATUS : MARRIED

EDUCATION : 8 th PASSED FROM UP BOARD

EXPRIENCE :
1. WORKED AS A MAINTENANCE FITTER IN POLYMER INDUSTRIES, PLOT NO. 203 VILLAGE NAGULI SAKARAWATI,NEW DELHI FROM 27/01/1988 TO 10/02/1993.
2. WORKED AS A MAINTENANCE FITTER IN SHIVA PLASTIC,PLOT NO 61 VILLAGE MATIALA UTTAM NAGAR NEW DELHI FROM 11/02/1993 TO 12/04/2004
3. WORKED AS A MAINTENANCE FITTER IN TOPS G.D.FOOD,S MFG (P) LTD RASTHAN UDYOG NAGAR NEW DELHI FROM 13/04/2001 TO 13/07/2005
4. WORKED AS A MAINTENANCE FITTER WITH OLIVIA HEALTHCARE INDUSTRIES DEHRADUN FROM 14/08/2005 TO 20/02/2010
5. FROM 21/02/2010 TO TILL DATE, WORKING WITH HERB,S DE OLIVIA, DEHRADUN AS A MECHANICAL MAINTENANCE FITTER.

DATE :
PLACE :
(RAM KISHAN)