Resume CV : QA QC NDT Welding Inspector

[tabish_in2001]

CURRICULUM VITAE :
SHAIKH MOHAMMED TABISH
Email id :shandt AT gmail.com, tabishin2001 AT gmail.com

EDUCATIONAL QUALIFICATIONS :
1. Mechanical Engineering (Diploma) in 2007 Maharashtra State Board of Technical Education (MSBTE)
2. Higher secondary Certificate (HSC) in 2004 Maharashtra State Board of Secondary and Higher Secondary Education – Pune (MSBSHSE)
3. Secondary School Certificate (S.S.C.) 2002 Maharashtra State Board of Secondary and Higher Secondary Education – Pune (MSBSHSE

CERTIFICATION IN PROFESSIONAL QUALIFICATION :
1. CSWIP 3.1 (TWI-UK) for Welding Inspector Level – II Certificate No. : 43650 Expiry Date: 08-September-2014
2. ASNT Level – II; in RT, UT, MPT & LPT Certification in 2007 from Arvind Bhhide’s Institute of Testing Technology – Mumbai

OBJECTIVE :
To achieve the Status and Position that would leverage my QA/QC qualification

Work Experience :
Organization : M/s. SAH inspection services, shop no 1 a garib nawaz apt Buddha colony pipe road kurla west Mumbai 400070
Designation : Welding Supervisor/NDT inspector
Period : JUNE–2004 till date
- WORKED AS A NDT INSPECTOR AND WELDING INSPECTOR AT TARAPUR NPCIL(NUCLEAR POWERPLANT CORPORATION OF INDIA) . SHUTDOWN PROJECT FROM NOVEMBER 2008 TO JANUARY 2009.
- Worked on a Naval Ship at Mazegaon Dock Pvt. Ltd. (MDL) Project under supervision of a French company DCNS, (Onshore) Welding and NDE Inspections on outer frames (Weld Inspection);
- DCNS is a major player on the European and world markets for value-adding Naval Defense System .
- Familiar with the standards of ASME Section IX,ASME B31.1,ASME B31.3,AWS D1.1 , API 1104 & IBR.
- Review of Welding Procedure Specification and Procedure Qualification records and follow Inspection test plan and QAP.
- Familiar with welder qualification, selection of electrodes (as per WPS), weld visual inspection.
- Fit-up checking, Review of weld parameters of SMAW, GTAW, SAW, GMAW according to WPS. Monitoring & Review of Preheat/Post heat & PWHT of welds.
- Familiar the welding of Mild Steel, Carbon Steels, Alloy steels &Stainless Steels.
- Monitor the storage, backing and handling of welding consumable. In accordance with manufacturer approved procedure...
- Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.) Mumbai have done Welding Inspection and witness UT.
- Worked for MRPL (Mangalore Refineries & Petrochemical Project, Mangalore) Performed welding and NDE inspection and TG on storage tanks.
- UT on Structural Joints (Weld Inspection)
- Job for Amritsar Airport Project, under Pratibha Pipes and Structural Ltd.
- Worked as Welding supervisor on Top and Bottom Dishends of Boilers Job for Larsen & Toubro.
- Worked as welding supervisor on Leg Support of Boilers Job for Larsen & Toubro.
- Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.) Mumbai
- Performed UT and have done Welding Inspection.
- Worked for Vikram Ispat (Saurashtra). Performed NDE inspection works on pressure valves
- Visits various local sites in Mumbai & Thane for Welding, NDE & Mechanical inspection works.

UT Equipments Handled :
Krautkamer USK6, PX series, EX series, Modsonic Einstien

SOME IMPORTANT ACADEMIC PROJECTS :
- SECOND PRIZE IN DIPEX 2007
MULTI PURPOSE FOOD PRESERVER (Selected For DIPEX- 2007 Inter College Project Competition All Over Maharashtra.)

ADDITIONAL INFORMATION :
Proficiency in Microsoft Office
Operating Systems : Windows 98 / 2000 / XP
Certification in PRO-E
Interests and Activities : Sports which include Badminton, Cricket, Football, Carom

LANGUAGE KNOWN :
English : Written and Spoken (Fluently)
Hindi : Written and Spoken (Fluently)

PERSONAL DATA :
Date of Birth : 02-janaury-1987 Place of Birth: Mumbai
Marital Status : Unmarried

Declaration :
I hereby affirm that the information in this document is accurate and true to the best of my knowledge.

Place : MUMBAI, INDIA

[Guest]

BERNARD M. BALURAN
Email Add. : bernard_baluran AT yahoo.com

OBJECTIVE:
To seek a flexible and challenging position that provides opportunities and enables me to enhance my potential and capabilities for professional development and career growth through various activities. And to be part of your progressive company and be one of your company’s best asset.

WORK EXPERIENCES :
QA/QC ENGINEER : June 26, 2011 - Present Boom General Contractor W.L.L Salwa Road Doha QATAR
Detailed Duties and Responsibilities :
- Conduct inspection at the site together with the consultant.
- Check the materials use as per drawing design according to QS(Qatar Standard)
- Check the quality of work based on QS(Qatar Standard)
- Prepare Request for Inspection (RFI’s) to be submitting to consultant for inspection.
- Perform other task that may be deemed necessary by the management as needed arises.

SECTION CHIEF QA INSPECTOR : (Non Destructive Testing)NDT Level II Nov. 06, 2008 – June 03, 2011
Quality Assurance Laboratory/ Quality Assurance Team
Subic Quality Assurance- Phil Inc. (SQA-Phil)
Hanjin Heavy Industries & Construction Co., LTD)
Redondo Peninsula, Sitio Agusuhin, Brgy. Cawag, Subic, Zambales
Philippines Company Set-up
HHIC-Phil. is a shipbuilding company that makes vessel/ships such as container carrier, oil tanker, bulk carrier, etc…
Job Summary :
- -Performs engineering and supervisory skills functions, plans and organizes NDT (Non-destructive testing) comments/reports and established work NDT plan timeframe reviewed, monitored and achieved as per Class/Owner’s Comments.
- -Perform and direct Nondestructive testing (Ultrasonic Testing (UT), Magnetic Testing (MT), Penetrant Testing (PT), and Radiographic Testing (RT) in accordance with established or organized procedures.
Detailed Duties and Responsibilities :
- Check the limitations of application of the test method.
- Translating NDT codes, standards, specifications and procedures into practical testing adapted to the actual working conditions.
- Perform calibration and set up of equipment use in NDT inspection (UT machine, MT machine).
- Assigned responsibility, guidance and training to the NDT LEVEL I personnel.
- Prepare written instruction, make report and organize NDT result and to be submit to NDT level III (QA manager) for review and submit to Owner of the project and Class representative for approval.
- Interpreting and evaluating results according to applicable codes and standards.
- Prepare Certificate of Welder and Welding Operator Qualification.
- Conduct examination test to welders (Welder Qualification Test) based on WPS.
- Check the physical condition of welding before conducting NDT testing.
- Organizing and reporting results of Nondestructive tests.
- Supervision and distribution of all works to the engineering staff.

All Prior NDE Experience :
4,300 TEU CLASS FULL CONTAINER CARRIER
3,600 TEU CLASS FULL CONTAINER CARRIER
114, OOO MT CRUDE OIL TANKER
175, OOO MT BULK CARRIER
180,000 MT BULK CARRIERS

All Prior NDT Codes, Standard and Specification use :
- ASME V
- ASME IX
- AWS D1.1
- ISO 5817
- Bureau Veritas (BV)
- Nippon Kaiji kyokai (NK)
- American Bureau Standard(ABS)
- Den Norks Veritas (DNV)
- Lloyds Register (LR)
- Germanischer Lloyds (GL)
- International Association of Classification Societies (IACS)

QA/QC INSPECTOR :
Roblett International Construction Corporation 3rd flr. OHMS Building Maria Clara St.Mandaluyong City
Project handle :
Procter and Gamble Philippines
LISP 1 Complex Cabuyao
Laguna
February 05 2008-July 22, 2008
KAMANAVA Flood Control Project
Maypajo Caloocan City.
December 16, 2007 – February 05, 2009
RESPONSIBILITIES :
- Attend meeting with my superior and coordinate to project owner for any problem encountered at site construction.
- Check and inspect materials use as per drawing design.
- Read and execute drawing design to workers.
- Maintain and inspect the quality of project base on drawing design.
- Make and distribute Welding Procedure and Specification (WPS) to all welders.
- Check and control the quality of welding performed by welders as per drawing design.
- Make testing procedure and assist the third party conducting testing : Hydro testing, Vacuum Testing, PT, UT,RT for welding testing.
- Make Execution Plan procedure for the project to be submitted to project owner.
- Make Inspection Report and Acceptance Report for every part of project finished and to be submitted to project owner for approval.
- Make estimation report for some additional work of the project and submitted to project owner for approval.
- Perform other task that may be deemed necessary by the management as needed arises.

MECHANICAL ENGINEER :
ROHM Electronics Philippines Inc.(Formerly : ROHM Appollo semi-conducto Phil. Inc.) PTC Complex Brgy. Maduya, Carmona
Cavite 4116 Laser Maintenance October 24, 2005 – October 18, 2006
RESPONSIBLITIES :
- Responsible for daily predictive and monthly preventive maintenance of all laser machines (UNIMARK II (thyratron, spark gap type), EO Laser).
- Trouble shooting and installation laser machine at the production area.
- Repairing defective laser machine at laser room area.
- Keep and submit all records of downtime report encountered in troubleshooting inthe production.
- Make necessary check sheet that will use in preventive maintenance.
- Prepare check sheet and record all laser machine for audit preparation.

Final Process Machine Maintenance :
October 19, 2006 – May 21, 2007
RESPONSIBLITIES :
- Responsible for handling six line final machines for maintaining good operation to produce quality finish product transistor (SMTH56H- type of transistor).
- Trouble shooting and repairing defective parts of machine such as pneumatics, electrical and mechanical parts encountered during production at the shortest time.
- Make and submit downtime report on all machine defect criteria, causes and action taken for evaluation and study purposes.
- Initiate continuous improvement to the line machine to eliminate downtime and accident of the operators.
- Conduct weekly and monthly preventive maintenance in all line machine.
- Undertake evaluation, investigation and offers suggestion related to costumer, in house claim and technical improvement.
- Implement support mechanical improvement installed by the Mother Company, other facilities, other department and the management.
- Perform other task that may deemed necessary by the management as needed arises.

BUILDING MAINTENANCE ENGINEER :
Mitsuba Philippines Corporation FCIE Brgy. Langkaan Dasmarinas
Cavite March 21, 2005 – September 03, 2005
RESPONSIBLITIES :
- Responsible for daily predictive and monthly preventive maintenance in all company’s facilities.
- Responsible for operation and maintenance of Mitsubishi Generator(780KVA), Atlas Copco Compressor(GA40, 2- GA20), Kobelco Compressor(2-50Hp) and all Air Conditioning Unit(koppel and Allenaire 10-20 tonner).
- Check and maintain company’s lighting system.
- Check all safety devices such as fire extinguisher, emergency and exit lights.
- Coordinate with the local electrical, mechanical, and plumbing contractor in case these services are subcontracted to local suppliers.

EDUCATIONAL PROFILE :
Tertiary Education :
Bachelor of Science in Mechanical Engineering University of Perpetual Help Rizal Pamplona 1 Las Pinas City 1999-2004
Secondary Education :
San Guillermo National High School San Marcelino Zambales 1995-1999
Elementary Education :
Linasin Elementary School San Marcelino Zambales 1989-1995

TRAINING AND SEMINARS :
- Certification for Nondestructive Testing Method Level 11 (UT, MT, PT, and RT) Hanjin Heavy Industries Construction Philippines Inc. Subic Shipyard Cawag, Subic Zambales July 01, 2009
- Certification for Nondestructive Testing Method Level 1 (UT, MT, PT, and RT) Hanjin Heavy Industries Construction Philippines Inc. Subic Shipyard Cawag, Subic Zambales Feb. 06, 2009
- Non Destructive Testing Method Training Program Hanjin Heavy Industries Construction Philippines Inc. Subic Shipyard Cawag, Subic Zambales Nov. 06, 2008~Feb. 05, 2009
- Quality Compressed Air Installation and Preventive Maintenance Atlas Copco Office Taguig Metro Manila June 24, 2005
- The Hospital Engineering and Maintenance Association of the Philippines(HEMAP) University of Perpetual Help Rizal-Campus Pamplona 1 Las Pinas City December 10-11, 2003

SKILL AND KEYWORDS :
- Computer Literate( Microsoft Office, Excel and Power Point)
- Can work with minimum supervision
- Very flexible and hardworking
- Fast learner
- Adapts easily to a new ideas.