www.suriron.com Sur Iron Steel Co Pvt Ltd Kolkata : Inspection Engineer

[Admin]

Sur Iron Steel Co Pvt Ltd Kolkata : Inspection Engineer
Website : http://www.suriron.com

About us
SUR IRON welding Division started in the year 1957. It is the first Indian Industry to design and manufacture welding equipment. This equipment was previously marketed by IOL Ltd. under INDARC brand and afterwards by ESAB India Ltd. under the ESAB brand. SISCO has introduced the latest technology of CO2/mig welding system under collaboration with OSAKA DENKI Ltd. of Japan and the latest technology of Diesel Engine driven welding generator with MOSA of Italy. These products under the brand name ' SURARC' have proved its Quality and reliability in most of prestigious projects in India . The welding research Institute of India have tested 'SURARC ' welding products and found it to be the finest quality which can compete any internationally reputed product ' SURARC ' welding system also offer welding manipulating, rotating and completely automatic system for any application. SUR IRON offer a complete range of Welding equipment and system for any application . Sur Iron is also the authorized distributor of OTC, DAIHEN, Japan & Mosa Italy.

Junior Engineer - Inspection

• Educational Qualification
B.Sc. (Physics)/LEE/LME

• Experience
1-2 years in any Electro-Mechanical Equipments manufacturing incoming material inspection department

• Job Responsibility
Inspection of incoming Electrical/Mechanical/Electronic components, maintain record of Jigs & Fixtures, different Meters, etc.

• Age : 22-25 years

If you would like to be considered for employment in Sur Iron, please forward your CV
Ms. Priyanka Sur
Manager (Market Support)
Sur Iron & Steel Co (P) Ltd
15 convent Road
Kolkata 700014
E-mail: priyanka.sur@suriron.com
Phone : +91 33-2265 2146/47, 2265 4179
Fax: +91 33-2265 2145/5024

[Guest-IJT]

Name : SENTHILKUMAR
Email : ssenthil.sachu AT gmail.com
Designation / Skillset : QA/AC-Quality-Engineer-NDT LEVEL II,Calibration,Inspection
Sir,
I am sending my resume for the posts of QA/QC-Engineer- in your organization.Please consider my resume and reply me at the earliest.
Thanks
Senthilkumar.S

Resume :
OBJECTIVE :
To achieve 100% in any assignment that I involved thereby ensuring career growth with personal and organizational satisfaction.
ACADAMIC RECORDS
EDUCATIONAL QUALIFICATION Name of the Institution Board/University of Study Year of Study MARKS
S.S.L.C Devanga Higher Secondary School, Coimbatore State Board of Secondary Education, Tamil Nadu 2000-2001 75%
DIPLOMA CIT Sandwich Polytechnic College,
Coimbatore State Board of Technical Education and Training,
Tamil Nadu 2001-2004 69%
NDT LEVEL -11 : - BIT INSTITUE OF NDT& QM -CBE
- Liquid penetrate testing(LPT)
- Magnetic particle inspection(MPI)
- Ultrasonic testing(UT)
- Radio graphic testing(RT)
PROFESSIONAL EXPERIENCE :
- CONCERN NAME : DRESSER VALVE INDIA PVT. LTD., COIMBATORE.
- Group of : GE ENERGY
(An ISO 9001 :9002&14000 certified company)
Manufacturers of various 1) Control valves,
2) Actuators
3) Level Transmitter/Controller
JOB PROFILE :
- DESINGNATION : ENGINEER -Quality
From dec’07 to till date I am with this concern involving in the Quality Department
THE JOB INVOLVES
- In process inspection of Control Valves components
- Inspection of In-house machined trim parts like (plug, stem, seating ,cauge, guide bush, body bonnet)
- Inspection of pressure retaining parts, casting, forgings, raw materials, machined components
- Identification of material and the chemical composition by using PAMI machine
- Inspection of fabrication component (Expander, air receiver tank, level transmitter) supplier end and in-house with NDT Clearance PT, RT.
- Verifying and acceptance of material, test certificates and reports from suppliers with respect to international standards like ASTM, AISI, EN etc.,
- Periodic Inspection of priority components at vendor ends to give quick process and reduce lead-time for In warding
- Analyzing and studying the component status and vendor process and giving suggestions for the further improvements
- Doing Inspection (PT & RT)under the supervision of LEVEL-II
- In charge for the calibration of Instruments and gauges
- Final Inspection of Control Valves, Level Transmitters and other pressure vessel products.
- Paint Inspection – Performance and paint system acceptance.
- In Process witness Inspection of Control valves and Level Transmitters testing.
COMPUTER EXPOSURE :
- DVI has established Advanced Integrated Manufacturing System ORACLE with front-end tools (Microsoft Back Office) for manufacturing activities (online system).
- CONCERN NAME : TEXMO INDUSTRIES -CBE
(An ISO 9001 :9002&14000 certified company)
Manufacturers of various 1 Single phase & three phase Agriculture pump and
Motors Manufacturing
JOB PROFILE :
- DESINGNATION : Inspector
From Jan’05 to Nov ’07 I am with this concern involving in the Inward Inspection Team
THE JOB INVOLVES
- Inward Inspection of components from vendors and giving Quality rating for all vendors.
- Analyzing the complaints and component defects from vendors.
- Analyzing the root cause for dimensional deviations and giving feedbacks to the vendors.
- Analyzing and studying the component status and vendor process and giving suggestions for the further improvements
- Giving corrective actions and preventive actions for the rejected components. .
From Jan’06 to Nov ’07 I am with this concern involving in the Assembly inspection and metrology lab
- Inspection of all type of Products for assembled condition and handling the Products for less rejection.
- Preparing layouts for developing new gauges and instruments for easy Inspection.
- Improving the Quality of the Product with high relief of rejections & reworks by giving various ideas to the Assembly Operators.
- Producing quality and inspection report for various Instruments, which assist for the Production of Quality Product
- Analyzing Quality issues for the products, and data collection of all parameters affecting Quality and Standard.
- Preparation of Power Point presentation regarding Quality issues of Product in Quality circle meeting.
- SRI RANG INDUSTRIES -CBE.
(An ISO Certified Company)
Manufacturers of various : Air compressor components and fabrication works
(Sub contractor for – ELGI Equipments)
JOB PROFILE :
- DESINGNATION : PRODUCTION SUPERVISER
From May’04 to Jan’ 05 I am with this concern involving in Production dept
THE JOB INVOLVES
- Allocation of work for the given order to the workers.
- Maintaining stock details for raw materials.
- Setting job in a machine
- Corrected the dimensions problem.
COMPUTER PROFICIENCY :
- Auto-CAD (2D-Draftings)
- OS like WINDOWS XP, 2000,98
TECHNICAL TRAINING :
Undergone In-plant training at SIRUVANI INDUSTRIES at Coimbatore.
PROJECT :
Project done on “RETRO FITTING DRILLING MACHINE “

DECLARATION :

I hereby declare that the above mentioned details are true to best of my knowledge and belief.

Date : Yours truthfully
Place: (S.SENTHIL KUMAR)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4361672
Date & Time : 12th Jul 2011 9:50 AM (UTC)
IP Address : 124.124.49.2
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Predicted Country : India