www.aryasystems.com ARYA Engineering Services Hyderabad : PDMS PDS Piping Designer

[Admin]

Would you like to be part of an exciting growth path? Arya Engineering Services is growing at a year to year growth rate of over 50% in the past few years. We are continuously expanding our services and our markets. We are always on the lookout for bright professionals and students who match our criteria. If you have experience in the areas mentioned below and have a flair for perfection and challenge, please send your resume and we will be happy to discuss with you opportunities in Arya Engineering Services.

1. PDMS & PDS Modeler / Designer / Engineer
Experience: 1 - 9 years
Disciplines: Piping / Civil
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: Diploma / B.E. / B. Tech (Mechanical / Chemical / Civil)


2. PDMS & PDS Administrator
Experience: 2 - 8 years
Qualification: Diploma / B.E. / B. Tech


3. SPPID Designer
Experience: 1 - 6 years
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: Diploma / B.E. / B. Tech

4. Auto CAD Drafter / Designer / Engineer
Experience: 1 - 9 years
Disciplines: Piping / Civil
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: ITI / Diploma / B.E. / B. Tech (Mechanical / Chemical / Civil)

5. Piping & Process Detailer / Designer / Engineer
Experience: 1 - 9 years
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: ITI / Diploma / B.E. / B. Tech (Mechanical / Chemical)
Software Skills (Optional): AutoCAD / Microstation / PDMS / PDS / AutoPlant / CADworks / SPPID / CAESAR-II


6. Civil & Steel Structural Detailer / Designer / Engineer
Experience: 1 - 9 years (Civil / Steel)
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: ITI / Diploma / B.E. / B. Tech (Civil)
Software Skills (Optional): AutoCAD / Microstation / PDMS / PDS / Tekla / STADD


7. Electrical & Instrumentation Detailer / Designer / Engineer
Experience: 3 - 9 years
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: Diploma / B.E. / B. Tech (Electrical / Instrumentation)


8. Mechanical (Static & Rotating) Detailer / Designer / Engineer
Experience: 3 - 9 years
Domain: Oil & Gas / Petrochemical / Process / Power
Qualification: ITI / Diploma / B.E. / B. Tech (Mechanical)

ARYA Engineering Services 1-8-344/1,
Patigadda Indian Airlines Colony
Begumpet, Secunderabad
A.P. - 500003, India.
Tel : +91 40 4475 6600
Fax : +91 40 4003 2168
http://www.aryasystems.com

Email contacts : Careers : hr@aryasystems.com

[spnaskar]

I am interested in PDMS Designer.

[praneesh.p]

i have experience in teaching . Now I would like to change my field for

that i did certificate course in piping . And looking job in piping field.

if you have any job matching my profile in piping field please inform me

PRANEESH. P.
# 28/2652, Phone No. : 08907309967
Janaki Nivas, Valiyaparambil, Email : praneesh031 AT yahoo.co.in
Nellicode P O,
Kozhikode, Kerala - 673016.
OBJECTIVE

To Work in a challenging position where my Qualification & skills are best utilized and I seek a career with a progressive organization.
SUMMARY
1. 2.6 Year Teaching Experience
2. Experience In Handling Material Testing, Fluid Machinery and Heat Transfer Lab
3. 4 Month Industrial Experience
4. B-Tech Mechanical Engineering
5. Piping Designing and Drafting Certificate course
ACADEMIC CHRONICLE
1. B Tech in Mechanical Engineering from Government Engineering College, Kozhikode during 2002 to 2006 with 62%.
2. Plus-Two from Peralassery Higher Secondary School, Kannur with 63%.
3. S.S.L.C from Koodali High School, Kannur with 79%.
EXPERIENCE
1. Working as a faculty in a self financing engineering college Calicut
Since August 2008
2. Worked in15 MW Biomass based Power Plant RR Energy Ltd., Raigar, Chhattisgarh in the post of Mechanical Engineer In Maintenance Department (3months)
3. Worked as a faculty in AL Ameen engineering college
Shornur (one year)


COMPUTER SKILLS & EXPOSURES
Drafting Software : AutoCAD 2004
Operating Systems Known: Windows 98, 2000, XP

INPLANT TRAINING
Name of the company : Nallalam Diesel Power Plant
Duration : One week
Skills Acquired During Training : Observed the Plant Activities

PROJECT DETAILS
Name of the company : Nallalam Diesel Power Plant
Title : Feasible study in Air conditioning the plant
Using waste Heat by Steam Jet Refrigeration

Team size : 5
Duration : One month

PROFESSIONAL QUALIFICATION

PIPING DESIGN ENGINEERING COURSE

Thirty Days Intensive Training Completed At Design Techniques, Bangalore and have achieved capability of independently generating Plot Plan, equipment Layout, Piping Isometrics, MTO and also 3D Modeling of Piping & Equipment in AutoCAD.

- Ability to Read P&ID Diagrams of any process plant.
- Preparation of Equipment list
- Preparation of Line List
- Pump piping exercise
- Rack Piping
- Conversant with various material standards
- Preparation of Isometric & orthographic Piping Views
- Ability To Study Vendor/Piping Drawings

PERSONAL PROFILE
Date of Birth : 03.02.1984
Fathers Name : P. Madanan
Gender : Male
Marital Status : Single
Religion : Hindu
Nationality : Indian
Languages Known : English, Malayalam, and Hindi

Date:
Place: Calicut (PRANEESH}

[alfred_1042]

ALFRED NEWMAN. J
H.NO. 1042,
Mission Mettu Street,
Tanjore, Mobile No :9487028929
Tamil Nadu-613001 E-mail : freddy_alfi@yahoo.co.in
India. Resi.no : (04362) 277048

Objectives:
A mechanical engineer seeking for a challenging and professional environment, which offers me good opportunities for growth and a dynamic role.

Personal traits:
Willingness to stand out and differentiate myself.
Determination and perseverance to push through my own ideas.
Good project management skills and dedication to work.
Desire to find better way of doing things.

Software Exposures:
Plant Modeling Software : Aveva’s PDMS (11.5, 11.6)
Review Software : Aveva’s Review Reality 6.2SP1 for PDMS Models
Autodesk Navis works Manager for all Models
Basic Design & Modeling Tools : AutoCAD (2008), Unigraphics NX5, Autodesk Inventor2009
Microstation-J.
Office : Microsoft Office 2007.

Career Summary:
- Planning Engineer, M/S Pipelines & Process Equipments, 17-16 Sidco Industrial Estate, Mathur, Pudukottai. (Experience of 10 Months)
- One year Graduate Apprenticeship Training:
Organization : BHARAT HEAVY ELECTRICALS LIMITED, TRICHY-14.
Duration : From June 2008 to May 2009.
Department : IT Solution & Services.
Software Used : Plant Design Management System (PDMS 11.5)
: Review Reality (6.2 SP1), AutodeskNavisWork Manger
: AutoCAD (2009)
: Adobe Premiere 6.0

- I worked for three months in METHODS/TOOLING (ADVANCED TECHNOLOGY PRODUCTS DEPT.) BHEL Trichy-14, in AutoCAD 2009 & Autodesk Inventor for 3 months from 10th June 2009 to 31st August 2009 involving design of jigs & fixtures.

Modules Exposure in PDMS:
ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT

Modeling task performed in PDMS:
Ø Equipment Modeling
Ø HVAC Modeling
Ø Pipe Modeling
Ø Structure Modeling
Ø Interference Checking
Ø Report Generation
Ø Drawing Generation using DRAFT and ISODRAFT Module.

Administration task performed in PDMS:
Ø Project creation in PDMS.
Ø Creating Users, Teams, databases, MDB’s (Multiple Databases), roles, scopes and ACR’s (Access Control Rights) for the project using ADMIN Module
Ø Piping, Structural and HVAC catalogue Component creation in the Catalogue Database using PARAGON Module.
Ø Specification creation in the Catalogue Database using SPECON Module.
Ø Writing PML code (PMLMAC & PMLFRM) for Generating Parametric Equipment in PDMS.
Ø Creating Standard Equipment using DESIGN TEMPLATES application in Design module.

Review task performed in Review Reality & Autodesk Navisworks Manger:
Ø Path creation, animation and snapshots
Ø Defining Material, Light, Group and Camera.
Ø Defining Signboard, Tagging & Labeling.
Ø Movie Creation, Editing, One Round & Walk through Animation.

Technical Skills:
Ø Having thorough Knowledge on Design of piping system.
Ø Determination of diameter and thickness (based on flow rate, pressure & strength).
Ø Fundamental of Stress Analysis.
Ø Load and Load combination, Stiffness and flexibility analysis of piping.
Ø Branch connection, Fittings and Flange Design concept of piping
Ø Supports and restraints selection concept of piping.
Ø VLH & CLH selection procedure

Projects Handled:
- Plant Modeling done for High Pressure Boiler with Auxiliaries for the Thermal Power Plant Lehra Mohabatt (2 x 250 MW) using PDMS.
- Plant Modeling done for High Pressure Boiler with Auxiliaries for the Thermal Power Plant FARAKKA (1 X 500 MW) using PDMS.
- Plant Modeling done for High Pressure Boiler with Auxiliaries for the Thermal Power Plant NORTH CHENNAI (2 X 600 MW) using PDMS.
- Plant Modeling done for High Pressure Boiler with Auxiliaries for the Thermal Power Plant BHAR SUPER THERMAL ONCE THROUGH (2 X 660 MW) using PDMS.

Academic Background:

B.Tech (Mechanical Engineering) - 6.82 CGPA
Shanmugha Arts, Science, Technology and Research Academy (SASTRA), Thanjavur,June 07

HIGHER SECONDARY EDUCATION (HSC) – 83.75%
BHEL Matriculation Higher Secondary School, State Board, Trichy, March-2003

CBSE EXAMINATION (Xth Standard) – 73.6%
R.S.K Higher Secondary School, Trichy, April-2001

Personal Details:
Father’s Name : D.Jayapal,
Date of Birth : 16.11.1985
Age : 24 Yrs
Gender : Male
Marital status : Single
Nationality : Indian
Language Known : Tamil, English.
Passport No. : G2136861
Driving Licence : M/CYCL.WG, LMV
Permanent Address : H.NO. 1042, Mission Mettu Street
Tanjore – 613001.

[KIRAN KUMAR.G]

Dear Sir,
I am a piping stress engineer having 3 years of experience and currently working in Hyderabad. And finding opportunities for better knowledge and prospectus. If any requirement/opening is their for piping stress analyst/engineer, please inform me.I have good knowledge in Caesar,PDMS,Auto cad,Navies works,PV Elite and Tank. Please find attached CV.
AREA OF EXPERTISE
- Design experience in various fields of engineering primarily in Petrochemical, Oil & Gas Industry for various projects involving on – plot piping, vessels Etc.
- Analysis of piping systems involved in process industries and power plants.
- Good knowledge on CAESAR II (piping analysis software), Ansys9.0.
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines, flange leakage tests, vessel nozzles as per WRC 107, Steam Turbines nozzles as per NEMA, Centrifugal Pumps nozzles As per API 610, Centrifugal Compressors Nozzles As per API 617, Heat Exchangers Nozzles As per API 661, Relief valves, Underground piping etc.
- Coordination with Interdisciplinary engineers, clients, contractors during Project phase.
- Conversant with IS codes such as ASME, API, ANSI, ASTM.
- Comfortable in communicating at all levels & working under specified deadlines.
PROJECT SUMMARY
July 2007 Till Date working as Stress Engineer.
- Detailed Engineering: CEMP PHASE - II for BPCL-KR Kochi.
Client: ISGEC. NOIDIA, INDIA.
Job involvement:
- Static Analysis of above ground piping.
- Analysis of typical systems involving high temperature & pressures like soot blowers.
- Analysis of piping, connecting equipment like pumps, steam headers.
- Analysis of critical pipe lines involving high temperatures & pressures.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
- Detailed Engineering: Hydrogen Generation Unit (HGU) for Bharat Oman
Refineries ltd. Bina Madhya Pradesh India
Client: TECHNIP KT INDIA LTD, NOIDA, INDIA
Job Involvement:
- Design & Static Analysis of Piping systems.
- Dynamic Analysis of piping systems.
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines etc.
- Analysis of critical pipe lines involving high temperatures & pressures.
- Analyze loads on compressor nozzles and perform flange leakage tests.
- Detailed Engineering: 15MW GREEN POWER PLANT, RAS for GEI
Industrial Systems Ltd.
Client: GEI INDUSTRIAL SYSTEMS LTD. BHOPAL

Job Involvement:
- Analysis of pipe lines in crucial areas involving turbines and condensers.
- Static analysis of big diameter ducts at considerable temperatures & pressures
- Generating & issuing stress isometrics according to the client requirement.
- Discussing the feasibilities of design modifications with the client.
- Detailed Engineering: HYDERABAD, INDIA.
Client: TAKREER, Abu Dhabi Refinery Co.
Job Involvement:
- Buried analysis for GRV/GRE sea water system of big diameter (48”) lines.
- Results of the analysis are documented for client review
SOFTWARE PROFICIENCY:
Design Packages : CAESAR II
Navis Works
Auto CAD
PDMS
PV ELITE
TANK
PRIMAVERA 6.1
ANSYS 9.0

Operating System : Windows Family.

[Guest]

hi iam k.munibabu i have compleated B.Tech mechanical in 2008 i have 1year of experience in production,so i want to change my career to design field so i have done certification cource ADVANCED DIPLOMA IN PROCEES PIPING ENGINEERING AND PDMS
PIPING DESIGN ENGINEERING COURSE

Fifty Days Intensive Training Completed At Sanjary educational academy, hyderabad and have achieved capability of independently generating equipment Layout, Piping Isometrics and also 3D Modeling of Piping & Equipment in AutoCAD.

Ability to Read P&ID Diagrams of any process plant.
- Preparation of Equipment list
- Preparation of Line List
- Pump piping exercise
- Rack Piping
- Conversant with various material standards
- Preparation of Isometric & orthographic Piping Views
- Ability To Study Vendor/Piping Drawings

Modeling task performed in PDMS:
- Equipment Modeling
- Pipe Modeling
- Structure Modeling
- Hangers and supports
- Report Generation
- Drawing Generation using DRAFT and ISODRAFT Module.

[Guest]

CURRICULUM VITAE
IRAVA SANDEEP
Plot No : 389, Second Floor,
Nehru Nagar, Street No. 8, Beside Shenoy Nursing Home,
East Marredpalli, Secunderabad - 500026.
Andhra Pradesh, INDIA
Tel : 040- 27731373 & 9963118820 (mobile)
Personnel 8054146299 (mobile)
E-mail : sandy00143 AT yahoo.com
Personal details
Date of birth : 22th April 1981
Nationality : Indian
Marital Status : Un-Married
Educational Qualifications
a) B-Tech in Mechanical Engineering.

b) 10+ 2 N.O.S.
c) S.S.C Sri Vidhya Vikas , Vizag.
Computer Knowledge : MS Office, C, C+
Objective
------------------------------------------------------------------------------------------------------------
To join a company, which would give me scope to prove my potential and enhance my abilities that would help me grow up in my professional and personal life.
Analytical; Drive to surpass goals; Meeting dead lines; Detail orientated; Time management; Multi-task oriented.
Personal Abilities
------------------------------------------------------------------------
1. Good communication skills, convincing capacity and listening skills.
2. Can tune to the situations and handle them efficiently.
3. A self-starter and can win others with ability to express host tactfully.
4. Strong determination, decisive natures are my strong abilities.
Hobbies and Interests
------------------------------------------------------------------------
1. Going long drives, traveling places, listening to music and freaking out are my interests.
2. Listening to music and playing snookers are my best hobbies.
Training Experience
- Under gone Training course in Andhra Pradesh at A.E.S (Advanced Engineering Studies) in LEVEL - 1 & 2 in NDT (Non Destructive Testing).
DYE PENETRANT TESTING,
MAGNETIC PARTICAL TESING,
ULTRASONIC TESTING,
RADIOGRAPHY TESTING.
- Completed QA/QC in Piping Certification Course in A.E.S at Hyderabad.
Present :
Working as a Engineer (QA/QC) in Fab-Tech at Raman Mandi, Bhatinda District, Punjab, INDIA.
Project : Guru Gobind Singh Refiner, Bhatinda Punjab.
Client : HPCL – Mittal Energy Limited.
Consultant : Engineers India Limited.
Contractor : G R ENGINEERING PVT LTD.
Vendor : Fab-Tech Works & construction at Bhatinda District, Punjab, INDIA.
.
Work Orders :
1) Regenerator and Reactor : Manufacturing, Inspection & Testing and dispatch.

2) 2 Nos. of Striper and Rectifier : Manufacturing, Inspection &
Testing and dispatch.

3) 1 Nos. of Pressure Vessel of Main Fractionator : Manufacturing,
Inspection & testing and dispatch.
Nature of Duties :
Expediting of Project : As per Fabrication Schedule and Progress
Reports.
Inspection & Testing : As per approved Drawings / ITP’S / Testing
Procedures, Specifications & Codes.

Experience :
Worked in MTS Technologies Ltd at secunderabad as a Engineer
(QA/QC) Fabrication of Pressure Vessels, Heat Exchangers, Storage Vessels from 01st July 2007 to 30th November 2009.

Working in FAB-TECH Pvt Ltd Organizations at as a SR Engineer
( QA/QC ) Fabrication of Pressure Vessels, Heat Exchangers, Columns,
Structure and Piping since 10th December 2009.
Executed as per the company’s system guide lines, Work instructions and
QA / QC procedures.
Activities :
1. Preparation / Review of Quality control plan for manufacturing and Inspection & Testing.
2. Inspection of MTC’s of plates, pipes, tubes, Structural Material ( Beams, Channels, Angles & Flats ) pipe fittings, flanges and Fasteners for acceptance.
3. Inspection of Bought out component Repots and MTC’s such as valves, dampers, silencers, Bearings, Insulation materials, perforated sheets and Rotating Equipments.
4. Inspection during various production stages of mechanical components as per approved drawings such as Markings on plates & openings on Shells, Fit-up of L-Seam and C-Seam Joints and its welding & NDT Tests. Preparing inspection documents according to the contract QAP.
5. Piping : Fit-up of C-Seam Joints between Pipe to Pipe and Pipe to Pipe
Fittings and its welding & NDT Tests. Preparing inspection documents
according to the contract QAP.
Checking of pipeline with respect to Isometric and P&I Drawings & preparing inspection documents according to the contract QAP.
6. Witness of welding NDT tests, Hydro test and pneumatic test.
7. Final Dimensional inspection of finished items and its trail assembly
on Structure as per Approved Drgs. Preparing inspection documents
according to the contract QAP.

8. Solving technical problems during production and trial assembly.
9. Attending customers Complaints.
10. Evaluation of suppliers for supply of raw materials.
11. Raising and Resolving of Non-Conformity report.
12. Co-ordinate for third party / Client’s inspection.
13. Preparing and maintaining ISO documents and systems.
14. Co-ordinate with other group leaders for attending to management
Meetings.
15. Coordinating with ISO Auditing.

IRAVA SANDEEP

[Guest]

CURRICULUM VITAE
N.GANESH
nemalipuri.ganesh AT gmail.com
Career Objective :
To pursue the challenging opportunities with most interest & Dedication would
Like to excel in the development field by applying my overall knowledge & Skill.
Previous Professional Experience :
Working experience in rubber products (hose building &railway
Rubber plates) manufacturing company.
Detail of Working Experience
SRIDHAR ENGINEERING AND RUBBER PRODUCTS PRIVATE
LIMITED.
POSITION : working as Production engineering (Production department)
LOCATION : Vijayawada.
DURATION : Working since May 2007 to June 2008
Company Profile
It manufacturing Rubber Hoses up to a size of 1000 mm dia and
working Pressure up to 30 bar for various applications like Water,
Air, Chemicals, Petroleum products and Abrasive slurries,
Rubber moulded goods, Metal to rubber bonded products and
Rubber
Lined articles -Air brake hoses, Grooved rubber sole plates,
Buffer and draft gear springs, side bearer pads, packing rings,
Upper and lower rubber washers for Indian Railways.

Job Profile
Supervising production
Maintain machinery
Finished giving target.
Follow up of machinery activities
Having knowledge in Production
Previous Working detail
LARSEN & TURBO
Position : working in structural engineering
Location : PNCP, Panipat.
Duration : Working since August 2008 to Oct 2009
Nature of duties in piping & structural work :
Details drawing and us built drawing drawn.
Structural work done. And Pre-fabrication and erection.
Present Working detail
CHIRAL BIOSCIENCES Pvt ltd
Working as maintenance engineer.
Duration : Working since Feb 2010 to till date
Educational Qualification :
I completed B.Tech mechanical from GIET,
Rajahmundry
Technical skills :
AutoCAD, Cati-a.
Diploma in computer applications, Windows (98/00, XP, NT),
’C’ language
Software Testing tools and java core.
Project :
VIBRATION AND BALANCING ANALYSIS OF ROTARY
MACHINE
Dept, at VSP, Steel plant
Visakhapatnam
Project Description :

Vibration can be defined as simply oscillating motion of a machine or
Machine component from its position of rest and here vibration causes are misa
alignment of coupling, bearings and gears and unbalance of rotary components
and aeronamic or hydraulic problems in fans, blowers and pumps and looseness
in components.

Here some weight fastened to rotor then only reducing vibration of the component.

[Guest]

which course is an better option for a mechanical engineer in the competitive world

[Guest]

hi my name is irfan frm mbnr dist.pursuing b.tech final year.i want a project on pdms modelor 2 submit as a b.tech main project.so grand me ur permision 2 give a project in ur company.