Simon India Ltd Delhi : Piping Engineer, PDS, PDMS, PlantSpace, Autoplant

[Admin]

Simon India Ltd. (SIL) is a multi-disciplinary Design, Engineering, Consulting and Contracting company located in Delhi focused on Chemical Process & Metallurgical Industries; Power projects, Pipeline projects, Fertilizer projects, Environment protection projects, etc. SIL belongs to the Zuari-Chambal-PPL Group of industries from the House of K. K. Birla. The Zuari-Chambal-PPL Group is the sixth largest producer of Fertilizer in the world and also has several joint ventures in India & overseas.

SIL has a branch in Saudi Arabia and a joint venture Engineering Company in Muscat, Oman.

SIL is executing several prestigious projects in India and overseas. As a part of its ambitious expansion plan, SIL needs to strengthen its team in all the disciplines. We are, therefore, looking for energetic, dedicated professionals.

Senior Piping Engineers (ENGR-001) (> 15 years experience) - 2 Positions for Delhi Candidates should be graduates or Diploma in engineering with ability to lead a group of Designers and Drafting personnel independently in Piping design and drawings of Chemical/ Petrochemical industry including
· Developing Piping Material Specifications and Pipe line specification index
· Developing Plant Layout, Equipment Layout and Piping Layout
· Carrying out computer aided stress analysis - knowledge of CEASER II
· Checking and approving Layouts/ Isometrics / MTOs / Support drawings prepared by others
· Preparing Material Requisitions for Piping items
· Technical review of offers and preparing Technical Queries, Technical Analysis of Bids
· Interaction, co-ordination with and support to other disciplines
· Assistance during site survey, construction, erection and commissioning
Knowledge of relevant Codes and Standards is essential. Experience of working with 3D Modelling software (PDS, PDMS, PlantSpace, Autoplant) is preferable.


Senior Piping Engineers (ENGR-001) (> 20 years experience) - 1 Positions for Delhi-potential HOD
Candidate should be graduate in engineering with ability to lead a group people consisting of lead engineers ,designers and Drafting personnel independently in Piping design and drawings of Chemical/ Petrochemical industry .Should have been exposed to guiding people in the following areas
· Developing Piping Material Specifications and Pipe line specification index
· Developing Plant Layout, Equipment Layout and Piping Layout
· Carrying out computer aided stress analysis - knowledge of CEASER II
· Checking and approving Layouts/ Isometrics / MTOs / Support drawings prepared by others
· Preparing Material Requisitions for Piping items
· Technical review of offers and preparing Technical Queries, Technical Analysis of Bids
· Interaction, co-ordination with and support to other disciplines
· Assistance during site survey, construction, erection and commissioning
Knowledge of relevant Codes and Standards is essential. Experience of working with 3D Modelling software (PDS, PDMS, PlantSpace, Autoplant) is preferable.


Contact : Anil Hari
Email : anil.hari@simonindia.com
Ph : 011-42602214 or 011-26436804
Mobile : 9818879507

http://www.simonindia.com

[KIRAN KUMAR.G]

Dear Sir,
I am a piping stress engineer having 3 years of experience and currently working in Hyderabad. And finding opportunities for better knowledge and prospectus. If any requirement/opening is their for piping stress analyst/engineer, please inform me.I have good knowledge in Caesar,PDMS,Auto cad,Navies works,PV Elite and Tank. Please find attached CV.
AREA OF EXPERTISE
- Design experience in various fields of engineering primarily in Petrochemical, Oil & Gas Industry for various projects involving on – plot piping, vessels Etc.
- Analysis of piping systems involved in process industries and power plants.
- Good knowledge on CAESAR II (piping analysis software), Ansys9.0.
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines, flange leakage tests, vessel nozzles as per WRC 107, Steam Turbines nozzles as per NEMA, Centrifugal Pumps nozzles As per API 610, Centrifugal Compressors Nozzles As per API 617, Heat Exchangers Nozzles As per API 661, Relief valves, Underground piping etc.
- Coordination with Interdisciplinary engineers, clients, contractors during Project phase.
- Conversant with IS codes such as ASME, API, ANSI, ASTM.
- Comfortable in communicating at all levels & working under specified deadlines.
PROJECT SUMMARY
July 2007 Till Date working as Stress Engineer.
- Detailed Engineering: CEMP PHASE - II for BPCL-KR Kochi.
Client: ISGEC. NOIDIA, INDIA.
Job involvement:
- Static Analysis of above ground piping.
- Analysis of typical systems involving high temperature & pressures like soot blowers.
- Analysis of piping, connecting equipment like pumps, steam headers.
- Analysis of critical pipe lines involving high temperatures & pressures.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
- Detailed Engineering: Hydrogen Generation Unit (HGU) for Bharat Oman
Refineries ltd. Bina Madhya Pradesh India
Client: TECHNIP KT INDIA LTD, NOIDA, INDIA
Job Involvement:
- Design & Static Analysis of Piping systems.
- Dynamic Analysis of piping systems.
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines etc.
- Analysis of critical pipe lines involving high temperatures & pressures.
- Analyze loads on compressor nozzles and perform flange leakage tests.
- Detailed Engineering: 15MW GREEN POWER PLANT, RAS for GEI
Industrial Systems Ltd.
Client: GEI INDUSTRIAL SYSTEMS LTD. BHOPAL

Job Involvement:
- Analysis of pipe lines in crucial areas involving turbines and condensers.
- Static analysis of big diameter ducts at considerable temperatures & pressures
- Generating & issuing stress isometrics according to the client requirement.
- Discussing the feasibilities of design modifications with the client.
- Detailed Engineering: HYDERABAD, INDIA.
Client: TAKREER, Abu Dhabi Refinery Co.
Job Involvement:
- Buried analysis for GRV/GRE sea water system of big diameter (48”) lines.
- Results of the analysis are documented for client review
SOFTWARE PROFICIENCY:
Design Packages : CAESAR II
Navis Works
Auto CAD
PDMS
PV ELITE
TANK
PRIMAVERA 6.1
ANSYS 9.0

Operating System : Windows Family.

[hiteshsuchak]

RESUME

HITESH N. SUCHAK
U-8/32, Second Floor, DLF Phase-III, Gurgoan, Haryana 122002
Phone no: 09999633575, Email - hiteshsuchak AT yahoo.com


OBJECTIVE:
To work with the progressive organization where I would get an opportunity to provide my service and have value addition to my knowledge by working with senior professionals.
SUMMARY:

A Chemical Engineering graduate with 6+ years of total experience in Piping Design engineering, Planning and control in oil and gas Refinery, Petrochemical, Power and Chemical Project.
Presently working with SK E&C India Pvt. Ltd, Gurgoan as a Piping Engineer.

- SK E&C India Pvt. Ltd. Gurgoan - ( December 2009 – Onward )
- Fluor Daniel India Pvt. Ltd. Gurgoan - (April 2007 – November 2009)
- Rolta India Pvt. Ltd. Mumbai - (May 2005 – March 2007)
- NGL fine Chem. Ltd. Mumbai - (October 2003 – April 2005)

WORK EXPERIENCE:

Currently working with SK E&C India Pvt. Ltd. as Piping Engineer from December 2009

PROJECTS: CURRENTLY WORKING AS A PIPING ENGINEER FOR GATHERING STATION- 23 UNIT ON KOC’S ENHANCEMENT OF BOOSTER STATION -131 PROJECT DECEMBER 2009 ONWARD.
Contribution
- Preparation of study layout for gathering station compressor unit.
- Preparation of Equipment nozzle orientation.
- Stress and structural input preparation.
- Need list preparation and updation.

PROJECTS: ALSO WORKING ON NSRP’S PROPOSAL PROJECT FOR KHDS UNIT FEBRUARY 2011 ONWARD.

- Material take-off from P&ID.
- Preparation of study piping transposition.
- Preparation of material sketches.
- Preparation of ITB Summary.

II. ORGANIZATION – Fluor Daniel India Pvt. Ltd. Gurgaon as an Associate Design Engineer-II
Duration: - Apr 2007 – November 2009

PROJECTS: WORKED AS A PIPING AREA LEAD FOR VDU-2 UNIT ON TOTAL’S DCP PORT ARTHUR REFINERY FROM AUGUST 2008 – NOVEMBER 2009.
Contribution
- Leading a team for technical support and guidance about client standards.
- Reviewing and monitoring the modeling of piping and equipments.
- Coordination with various disciplines like structural, electrical, control system, project control and Prime office
- Handling piping package like Column, Exchangers, Pumps, Filter, Air coolers and unit rack. Equipment modeling for the same.
- Reviewing the vendor drawing and documents checking piping layout and inter discipline drawings/ documents.
- L&P and vessel clits drawing generation for vessel vendors.
- Steam tracing manifolds layout finalization and steam tracing for unit.
- Monitoring progress of work for the area keeping in view the quality aspects to meet the schedule of deliverables.
- Self checking and trouble shooting in isometric extraction.
- Supporting and managing activities like model updation per design change notice, model preparation for internal and client review, tag closure activity.


PROJECTS : CONOCOPHILLIPS WOOD RIVER REFINERY CORE PROJECT AS ISOMERIC CHECKER
FROM MAY 2008 – AUGUST 2008.
Contribution
- Isometric checking for OSBL rack and HCF unit from P&ID, line list, latest equipment drawing also for design, material and support consistency.
- Tie-in sketches verification against the existing plant LFM.
- Equipment L&P drawing checking.

PROJECTS : OAK GROVE POWER PROJECT WORKED AS DESIGNER FROM ¬¬APRIL 2007 – MAY 2008
Contribution
- Preparation of piping and equipment layout for unit incorporating process requirement vendor drawing
details.
- Handling Piping and Equipment modeling for Turbine Drain, Heater Drain and Lube oil system.
- Engineering co-ordination with disciplines like structural, electrical, control system and counter parts.
- Stress input, Stress sketch preparation and Incorporation.
- Preparation for internal & client reviews, review tags closure activity.
- Planning, Controlling and monitoring isometrics for systems.
- Interference resolution using Interclash software.
- Extraction of general arrangement drawing from Drawing Manager

International Assignment:
Visited Prime office at Greenville (SC), USA (Duration from Feb-2007 to Apr-2007) to facilitate design work to progress as per schedule and to assist counter parts in project close out activity.

Successful completion of Intermediate Piping and Isometric checker Training at Fluor Daniel India Pvt. Ltd.

III. ORGANIZATION – Rolta India Limited Mumbai as an Executive.
Duration: - June 2005 – March 2007
Projects: Rabigh Development Project Propylene Oxide Plant.
Contribution
- Piping modeling from General Arrangement Drawing (GAD) & P & ID
- Isometric generation and correction per client comments.
- RDB conflict report generation and resolution.
- Modeling for equipment such as air compressors, pumps and tanks.
- Schedule Review with client in the areas on SPR, clashes identification & removal of the same.
- Drawing generation for equipment nozzle orientation using drawing manager and orthogen.
- Input verification, co-ordination with clients & area work supervision.


Project: Essar Oil Limited
Contribution:
- Piping modeling and Extraction of Isometric Drawings from General arrangement drawings.
- Equipment modeling for pump, Exchangers, horizontal and vertical vessels per latest vendor drawing.
- Extraction of Isometric Drawings as per vendor drawings.
- Self checking and trouble shooting in isometric extraction.
III. ORGANIZATION: M/S NGL FINE- CHEM. LIMITED MUMBAI
Duration: - Oct-2003- May 2005
Responsibilities:
- Production planning, controlling and execution.
- Handling expansion and revamp for ISM HCL unit.
- Supervising day-to-day shop floor activities.
- Attending and troubleshooting in production, process and equipments.
- Training to workmen on time-to-time basis
- A close liaison with stores, Quality assurance and maintenance department.

ACADEMIC RECORDS :
Qualification:

I. B.E. (Chemical Engineering)

Institute: Bharati Vidyapeet College of Engg. Pune University.
Percentage: 66.13% (Distinction). Year of Passing: 2003
II. Diploma in Chemical Engineering.
Institute: Government Polytechnic Yavatmal Maharashtra, M.S. Board of Technical Education Mumbai.
Percentage: 70.83% Year of Passing: 2000.
III. Diploma in Piping Engineering.
Institute: Suvidhya Institute of technology Year of Passing: 2006.
SOFTWARE
SKILLS:


- PDS (Plant Design System)
- SPR (Smart Plant Review)
- SP3D
- Microstation (2D & 3D)
- Orthogen
- Pelicon Forge

PERSONAL
INFORMATION:

Permanent Address: Row House No.1048, First Floor, Sector No.5, Opp. to Koperkhairane station,
Koperkhairane, Navi Mumbai.400709.
Date of birth: 5th Jan 1979
Marital status: Married.
Languages known: English, Hindi, Marathi, Gujrati
Passport No: F-8599275