CURRICULUM – VITAE :
Name : VINOD PANDEY
E-Mail : vinod26pandey AT yahoo.co.in

Career objective :
To pursue a challenging and satisfying carrier in technical industries and enhance my skill and personal growth in conjunction with the organization’s goals and objective.

Present Organisation :
Mahendra Sponge & Power Pvt. Ltd. As a Asst. Manager (Maintenance) in SMS division from May 2009 to till date.
Profile :
As a Sr. Engineer (Maintenance) direct reporting to G.M. for Planning and maintenance of day to day, weekly, monthly break down of Static Frequency Converter, Inverter Thyrister, Crucible, (8 MT Electrotherm make 2 panel), D.M. Plant, Hydraulic Pump & Circuit, Pump House( i.e 20 Hp, 30 HP, 12.5 HP), Cooling Tower, Water Treatment analysis, EOT Crane up to 20 MT, Material Inspection, maintain a report of Mechanical & Electrical break down and crucible maintenance report.

Past Organization :
Godawari Power & Ispat Limited as a Sr. Engineer (Mechanical) in Steel Melting Shop from August 2008 to April 2009.
Profile :
As a Sr. Engineer (Mechanical) reporting to HOD for Planning and Maintenance of day to day, weekly, monthly break down of Static Frequency Converter, Inverter Thyrister, Crucible, (6 MT Inductotherm make 2 panel, 7 MT Inductotherm make 3 panel, 12 MT ABB make single panel, 12 MT Inductotherm make 2 panel, 15 MT Inductotherm make 2 panel), Pump House Maintenance, (5 HP to 40 HP Motor and Pump), E.O.T. Crane (10 MT, 25 MT, 35 MT Maintenance), Material requirement planning and co-ordination with H.O.D. mechanical, Maintenance of Concast 6 x 11 meter & 4 x 11 Meter.

Company Profile :
Godawari Power & Ispat Limited is a part of Hira Group of Company, in GPIL 55 MW Power Plant, 2 x 350 TPD, 2 x 500 TPD production of Direct Reduction Iron (Sponge Iron) plant, 2 x 6 TPH, 3 x 7 TPH, 3 x 12 TPH, 2 x 15 TPH Induction Furnace production capacity, Wire Drawing, Oxygen Plant, Ferro Alloys and Project is under process for 2 x 12 TPH SMS Electrotherm make, 2 x 500 TPD Direction reduction iron, Concast 6 x 11 meter radius.

Past organization :
Mahendra Sponge & Power Pvt. Ltd. As a Sr. Engineer (Maintenance) in SMS division from June 2006 to July 2008.
Profile :
As a Sr. Engineer (Maintenance) direct reporting to G.M. for Planning and maintenance of day to day, weekly, monthly break down of Static Frequency Converter, Inverter Thyrister, Crucible, (8 MT Electrotherm make 2 panel), D.M. Plant, Hydraulic Pump & Circuit, Pump House( i.e 20 Hp, 30 HP, 12.5 HP), Cooling Tower, Water Treatment analysis, EOT Crane up to 20 MT, Material Inspection, maintain a report of Mechanical & Electrical break down and crucible maintenance report.
Achievements :
1. Erection & Commissioning of 8 TPH crucible (Electrotherm & Megatherm).
2. Erection & Commissioning of Cooling Tower and Pump House, Water Pipe Line.
3. E.O.T. crane capacity increase from 15 MT to 20 MT under my guidance.

Company Profile :
Mahendra Sponge & Power Pvt. Ltd. is a 2 x 100 TPD production of Direct Iron Plant, 8 MW Power Plant and 2 x 8 TPH Electrotherm make Induction Furnace and Project is under process for 2 x 10 Mt. SMS Inductotherm make and concast 6 x 11 Meter radius.

Jayaswals Neco Limited (CCD), as a Sr, Engineer (Electrical & Mechanical) maintenance from Dec 2000 to May 2006.
Profile :
As a Maintenance Engineer, I am direct reporting to G.M. for planning & co-ordination with CSEB, P&T, Safety, Inspection and others.) organization, Day to day breakdown of equipment like EOT crane up to (5 Mt. to 15 Mt.), Cupola Furnace (10 Mt./Hr), Lathe, Cutter, Side Facing machine etc, Transformer 500 KVA, Sand Mixture, Shot Blasting etc., Conducting daily, weekly, and monthly review meeting, Assurance of availability of material and equipment (material & electrical both). Civil & project work are the part of my responsibility.

Achievement :
1. Erection & commissioning of Gantry Crane up to 5 to 10 Mt.
2. Erection & commissioning of Ladle up to 2 to 10 MT.
3. Making a new 10 Mt EOT crane.

3. A.J. Industries as a Engineer from Sept 1998 to Nov 2000.

Education Qualification :
1. Passed 10th from M.P. Board, Bhopal in the year 1991.
2. Passed 12th from M.P. Board, Bhopal in the year 1993.
3. Complete Diploma in Mechanical Engg. From Board of Technical Education in 1998
4. Computer Knowledge : Microsoft Certified Professional (MCP), Auto Cad R 2000, Foxpro 2.6, Ms-XP 2000, C, C++.

Additional Courses :
ISO 9001 – 2000 Auditors course from Quality Management System Academy (QMSA) Nagpur & maintain record of ISO 9001 – 2000.

Date :
Place : Bhilai (VINOD PANDEY)