www.viscas.com Engineering India Pvt Ltd Gurgaon : AutoCAD Civil Engineer

[Admin]

viscas.com
Viscas Engineering India Pvt. Ltd Gurgaon : Civil Engineer

Designation: Civil Engineer
Experience: 2 - 3 Years
Location: Gurgaon

Job Description:
Meeting with Clients
Site visit and design the required parameters in Auto Cad
Make chages in Auto Cad designs for Power Calbe Project
Making of daily project reports
Thorough knowledge of Auto Cad and MS-Project is must
Material Management
And mis. office related works

Desired Candidate Profile:
Meeting with Clients and understanding the requirment
Site visit and design the required parameters in Auto Cad
Make chages in Auto Cad designs for Power Calbe Project
Making of daily project reports
Thorough knowledge of Auto Cad and MS-Project is must
Material Management
And mis. office related works

About us
Viscas Engineering India Pvt. Ltd., is an Indian representative company of Viscas Corporation, Japan and it provides services for overhead power transmission systems from remote areas to consumer regions and underground power transmission systems that assist in providing power to large metropolitan areas; and distribution system from urban substations to customers, supplying cables, accessories and construction works.

Address:
Viscas Engineering India Pvt Ltd
H#-33/10 GF, DLF-I
GURGAON,Haryana,India 122002

Email Address: jobs.viscas@gmail.com
Website: http://www.viscas.com/

[Guest-IJT]

Hi Sir/Mam

I would like to apply for this posting. Please find my attached resume for your reference.

WORKING AS PROJECT ENGINEER WITH WIPRO TECHNOLOGIES A DIPLOMA IN MECHANICAL (SANDWICH) ENGG WITH HONORS


THIRUMALAI DHANASEKARAN
NO: 2/26, GOVINDASAMY STREET,
NEHRU NAGAR, CHECKPOST,
VELACHERY, CHENNAI – 600 042, TN, INDIA
- : Mobile Confidential(please mail to the e-mail address)
- : gthiruforum AT yahoo.com

CAREER OBJECTIVE:
To develop my knowledge to achieve high career growth and to develop the growth of the company. Client Focused - Achieve high levels of customer satisfaction (Internal & External). I am confident in my work and if I am given an opportunity to work in your company, I will do my level best for the growth of the company keeping myself dynamic, visionary & competitive with the changing IT environment.

AREA OF EXPERTISE:
- Engineering Design Services (CATIA V5, HYPERMESH)
- Quality Assurance

Interested to pursue career in Design field (CATIA V5).

EDUCATIONAL QUALIFICATION(S):
S.No Course School/College Course duration Percentage
1 Diploma in Mechanical Sandwich Engineering Central Polytechnic College, Taramani, Chennai - 600 113, TN Jun 03 – Dec 06 85% Honors
2 High School – SSLC Corporation Boys Hr. Sec. School, Chennai, TN 2000 – 2001 84%
3 Higher Secondary - HSSC Corporation Boys Hr. Sec. School, Chennai, TN 2001 – 2003 64.14%

TECHNICAL COURSE:
Name of the course: CAD/CAM Using CATIA V5
Institute : CIPET - Central Institute of Plastic Engineering and Technology.
Address : Guindy, Chennai, India.

TECHNICAL SKILLS:
Ability to perform various operations for generating a complete 3D model using part modeling, surface modeling and sheet metal design process.

COURSE DESCRIPTION:
- Part modeling:
Sketcher, Constraints, Sketch Based Features, Dress up Features, Transformation Features, Associating Bodies with Boolean Operations, Reference Elements, Modifying Features.
- Assembly:
Creating Assembly, Manipulating Components, Assembly Constraints, Exploded View, Clash Checking, Assembly Feature Creation, Using Mechanical Standard Parts, Top Down Assembly.
- Drafting:
Generative Drafting, Interactive Drafting, Creating Views, Sectioning, Dimensioning, Labeling, Editing Views.
- Surface:
Wire Frame Geometry Creation, Basic Surface, Swept Surface, Loft Surface. Editing, Advanced Surface, Surface Based Features in Part Design.
- Sheet Metal Designing.

SOFTWARE SKILLS:
Programming Knowledge: (Expertise) CATIA V5, HYPERMESH (FEM)
AutoCAD, CAM
Software: MS-Office(Word, Excel, PowerPoint)
Operating System: Good exposure to WINDOWS (98, 2000, 2003, XP).

CURRENT ORGANIZATION:
Working with Wipro technologies in automotive division of Engineering Design Services.

Employer: Wipro Technologies, Hyderabad (www.wipro.com)
Designation: Project Engineer – Automotive division of engineering Design Services
DOJ: 2nd April 2008 – Till date
Project Clients: Nissan motors, Japan

Nature of Work:
Finite element modeling of BIW, Trims and closures components for Crash and NVH analysis.
Tool used: HYPERMESH

Project Description:
- Project involves FE modeling of components, of different assemblies of BIW, Trims and Closures.
- Creating shell (2-D) mesh using HM tool strictly following the guide lines specified by the client.
- After modeling, quality criteria’s are maintained as per client’s requirements.
- After completion of meshing, penetration clearance is done by offsetting penetrating areas.
- Bolt holes are given 1-D connections.
- Nodes are matched on the areas where Arc welds are to be done.

Achievements:
- Ability to model different assemblies like:
1. BIW:
- Body side, FR- floor, RR-floor, Roof, RR- panel, Hoodle edge, Front side member (FSM), Wheel inner, Wheel outer and Dash.
2. Closure:
- FR-door, RR- door, Hood and Slide door.
3. Trims:
- Interior trims components like Pedals, Blower, Console, Air bag sensors etc.
- Exterior TRIMS components like FR- BMPR-Fascia, RR- BMPR Fascia and Grills.
- Under floor trims components like Muffler, fuel tank etc.
- Undergone ERT Training (accomplished with Certificate).

SIGNIFICANT ACCOMPLISHMENTS IN PROJECTS:
1. On-Time Delivery of all projects within the estimated time with quantity and quality.
2. Highly meticulous on work and make sure whether the components have been modeled strictly following the guide lines specified by the client.
3. Active participation in other team projects like modeling of plastic components at times.
4. Compliance with Core Process & Quality Procedures.
5. Training and other technical workshops were attended during leisure time.
6. Efficient performance by working more than the billability hours a week.
7. Participate in the planning and execution of team building events
8. Good ability to model any critical component.

PREVIOUS ORGANIZATION:
Worked as Quality Engineer Trainee in Delphi TVS (TVS Groups) in Quality Assurance department.
Employer: DELPHI TVS, Sriperumbadur, TN (www.delphitvs.com)
Designation: Quality Engineer Trainee (Quality Assurance)
DOJ: 3rd Jan 2007 – 28th Mar 2008
Project Clients: Renault & TATA Motors

Nature of Work:
- Manufacturing Quality Audit
- Internal Quality Audit
- Preparation of PPAP Documents.
- Preparation of ISIR Reports
- Preparation of 8D Reports
- Exposure to CMM.

The Manufacturing Quality audit also includes Product Quality Audit, Functional Audit and Process Audit

Job Description:
- Monitoring and recording process/product parameters through periodical audit. Monitoring SPC Charts of Critical parameter of each process.
- Monitoring the daily rejection details of each machine & analyzing Root Cause for those rejections.
- Performance of functional audit. Preparation of 8D Report, for the complaints that is received from the customer end.
- Pre - Monitoring to avoid the field defects.
- Calculation of First Time Pass Rate of our cell.
- Calculation of process capability of each process that maintains critical parameters.
- Preparation of PPAP document and ISIR report at the time of development of new product or modification of existing process/product.
- Ability to use the Measuring Instruments such as:
- CMM (Co-ordinate Measuring Machine), SURFCOM – to inspect surface roughness to various standards, precision radius & angular measurements, ROUNDCOM – to inspect Roundness, PROFILE PROJECTOR.

INPLANT TRAINING (Spell 1 and Spell2):
During IV Semester for the period of Six months (2nd Dec 2004 – 1st June 2005) Factory : Addison & Co., Ltd, No: 4, 18 & 19, Smith Road, Chennai – 600 002
Department in which training has underwent: Inspection
Field Of Training: Manufacture of Engineers’ Cutting Tools

During VII Semester for the period of Six months (9th June 2006 – 8th Dec 2006) Factory : Brakes India Ltd.,(TVS groups), Padi, Chennai- 600 050.
Department in which training has underwent : Inspection & Calibration
Field Of Training: Manufacture of Automobile Braking Systems.

ACEDAMIC PROJECT WORK
Project Title: SOLAR WHEEL CHAIR FOR HANDICAP
Project Description: Automatic wheel chair for Handicapped using solar power.

EXTRA CURRICULAR ACTIVITIES:
- Regular participation in Sports (Running, High Jump & Long Jump)

HOBBIES:
- Reading books.
- Watching & playing Cricket.

LANGUAGE KNOWN:
Languages Speak Write Read
English Yes Yes Yes
Tamil Yes Yes Yes
Hindi No Yes Yes

PERSONAL INFORMATION:
FATHER’S NAME : C.DHANASEKARAN
DATE OF BIRTH : 28.06.1985
MARITAL STATUS : SINGLE
GENDER : MALE
NATIONALITY : INDIAN

DECLARATION:
I hereby declare that the above furnished details are true to the best of my knowledge.

Station: Chennai Yours Truly,
Date: 14th July 2009 (Thirumalai. D)