www.cdm.com India Chennai : Instrumentation Engineer

[Admin]

CDM - R K Salai Chennai : Instrumentation Engineer 5 (mid-level)

Designation: Instrumentation Engineer 5 (mid-level)
Experience: 10 - 15 Years
Location: Chennai

Job Description:
CDM is expanding its design center in Chennai. We are looking for an Instrumentation Engineer with 10 - 15 years of experience in water & wastewater facility design. Go to www.cdm.com/careers to view full job description and apply.
• Fully competent level applying intensive and diversified knowledge of engineering/scientific principles and practices in broad areas of assignments and related fields
• Independently decides on engineering/scientific problem and methods
• Requires the ability and expertise to use advanced techniques and the modification and extension of theories, precepts and practices of particular field of specialty resulting from progressive experience
• Supervision and guidance provided largely on overall objectives, critical issues, new concepts, and policy matters
• Consults with supervisor concerning unusual problems and developments
• Acts as mentor for lower level employees
• Increasing budget, cost control and technical responsibility
• Participates or assists in new business development by contributing to strategic planning, marketing and business operations planning, as needed
• In a supervisory capacity, plans, develops, coordinates and directs projects; coordinates and reviews the work of engineers/scientists or technicians, estimates manpower needs and schedules and assigns work to meet completion date
• In an individual researcher capacity, performs complex or novel assignments requiring the development of new or improved techniques, procedures, processes, products, equipment and methods; may be assisted on project by other engineers/scientists or technicians
• In a staff specialist capacity, develops and evaluates plans and criteria for a variety of projects and activities to be carried out by others; usually performs as a staff advisor and consultant as to a technical specialty

Address:
#1-M Prince Arcade
22A Cathedral Road
Chennai 600 086, India

Email Address: careers@cdm.com cdmchennai@vsnl.com
Website: http://www.cdm.com/career

[nasaralipetro@gmail.]

M. NASAR ALI Abu Dhabi
Permanent Address
Vellalar Street,
Avoor, (Po)
Thirurvarur, (Dt)
Tamil Nadu
India. 612 701
- nasarali_2008 AT yahoo.com - 00971- 50-7629193

Career Objective

Seeing a challenging position in Instrumentation maintenance which utilizes my education, background and experience with opportunities for advancement

Work Experience

DESIGNATION PERIOD ORGANISAION
Electrical and Instrument Supervisor September 2008 until Date International Mechanical Electrical co (IMECO)Abu Dhabi, U.A.E.
Instrumentation Supervisor
July-2004 to Augest-2008 Al-Suwadi industrial Services, Al-Jubail, Saudi Arabia.
Instrumentation Supervisor October-2003 to June-2004 Saudi Salt Refinery Works (SASA&MASA) Jeddah, Saudi Arabia
Instrumentation Supervisor May-2002 to Augest-2003 Thiru Arruran Sugars & Power Plant, Tamil Nadu, India



Educational Qualification
Qualification Institution Year
B.Sc (Industrial Electronics)
University of Baarthidasan, India 1999 to 2002
(MBA) Project Management University of Alagappa. India On going
Higher Secondary
Native Higher Secondary 1997 to 1999


Career Profile
- 8 Years of experience in Various Industrial Projects of Instrumentation field.
- Hands on experience in Installation, Pre-Commissioning, Commissioning, Operation and Maintenance of Electrical and Instrumentation Equipments.
- Good Communication and Leadership Skills.
- Supervise the Process Interfacing Building (PIB) Works for installation of new Distributed Control System (DCS) System Cabinets, Emergency Shut down (ESD) Cabinets, Marshalling Cabinets, Analog, and Digital I/O Cabinets.
- Supervise the Installation & Terminations of Vibration Monitoring System (VMS) Cabinets.
- Manpower handling for the instruments crew and preparation of instrument material request.
- Supervise the Field instruments works in Calibration (Bench and Online) and Installation of the Flow Transmitters, Level, Pressure, Differential Pressure Transmitters, Temperature Transmitters, and Control valves (PCV, FCV, LCV).
- Supervise the all field instruments Final Loop testing and Pre commissioning.
- Supervise the daily maintenance of the Electrical motor control panels (MCC) for the water pumping station like (star delta ckt & autotransformers).
- Supervise the Cathodic Protection system of the installation, termination & Testing of the reference Anodes, reference electrodes, Rectified Transformers.
- Maintains records of work performed and work in progress in the computerized system, other related data logging etc. and processes paperwork related to electrical jobs.
- Operation and Maintenance of Sewage plant & Pumping Station (Sewage) through SCADA System (Control logic 5000) on day to day basis.
- Supervise the Installation, testing and maintenance of Motor Operated Valves (MOV), Variable Frequency Drives (VFD).
- Control the technicians team and ensure timely, quality and maintenance, troubleshooting.
- Responsible for the unpacking inspection of instruments at warehouse and preparing material receiving inspection reports.
- Inspection of cables for DCS Marshalling Cabinets, ESD Cabinets and System Cabinets.
- Preparing the Loop Folders for all Field Instruments like Temperature Transmitters, Flow Transmitters, Level Transmitters, Control Values, On Off Values.
- Inspections before installation of pressure, level, flow, differential pressure transmitter and temperature gauges.
- Inspection for the installation of cable trays and conduit in classified and Non- classified areas as per SABICES, NEMA and NEC accordingly.
- All field instruments calibration tested inspection.
- Tube Leak Inspection for Control values and Field Transmitters.
- Inspection of Field junction box before installation like AJB, DJB, TJB, GJB of all type and size as per SABIC standards.
- Preparing punch lists as per project scope of work.
- Submission/Hand over the entire original testing records as per SABIC Engineering procedures.
- Attending the Monthly/Weekly Quality meetings.
- Supporting of all Pre-Commissioning & Commissioning activities.

Area of Specialization
Exposure to Various Process Control Systems Such as:
- Distributed Control System (DCS) Honeywell(TDC3000) Yokogawa(CENTEUM CS-3000)
- Vibration Monitoring System (VMS) Bentley Nevada.
- Emergency Shut Down (ESD) Triconex .
- Programming Logic Control (PLC) Allen-Bradley (SLC-500, Control logic-5000).

Computer Skills
- Languages : C.
- Operating Systems : Windows 98 / 2000 / XP/Vista.
- Office Tools : MS Office 2003/2007.

Projects Handled
- Project: Sewage Treatment Plant, Water Pumping Station.
Client: Abu Dhabi Nation Oil Company (ADNOC) through IMECO U.A.E

- Project: Natural Gas & Liquid Plant.(Ethane, Butane, Propane Expansion).
Client: Saudi ARAMCO through Al Suwadi, Saudi Arabia.

- Project: Oily Water Treatment Up gradation Project at Ras Tanura.
Client: Saudi ARAMCO.Through Al Suwadi, Saudi Arabia.

- Project: Saudi Methanol Petro Chemical Plant.(AR-RAZI-V)
Client: Saudi basic industries (SABIC). Through Al Suwadi, Saudi Arabia.

- Project: Saudi salt refinery plant (SASA &MASA). Jeddah, Saudi Arabia.


Personal Profile

Fathers Name : Mohamed Farook Date of Birth : : 04. 05.1982
Gender : Male. Marital Status : Married.
Nationality/Religion : Indian / Islam.
Languages Known : English, Tamil, Hindi and Arabic.
Passport Details : Passport No : E3135702
Validity : Up to 25/10/2012.
Place of Issue : Trichy, Tamil nadu, India.

Declaration
I hereby declare that the above written particulars are true to the best of my knowledge and belief. I promise to work sincerely and prepared to do hard work duly abiding to the organization.
Yours Truly,

Place : Abu Dhabi. M. NASAR ALI

[Guest]

FROM,
J.DINESH DEV PRASAD
EMAIL ID;sj_dina@yahoo.com
Respected Sir/Madam, Sub: Application for job
I have completed my Under graduation with B.E ELECTRONICS&INSTRUMENTATION ENGINEERING). I am very much interested in taking up my career in your concern .
If given appointment I am sure I will prove an asset for your organization. Awaiting a positive response with hope.

Thanking you,
Your’s Sincerely
(Dinesh Dev Prasad.J)

[jaga.shekar@gmail.com]

RESUME
JAGADISH.S
Email : jaga.shekar AT gmail.com

OBJECTIVE :
Work in a Challenging and Creative Environment, to Pursue Towards the Goals of the Organization.

PROFESSIONAL EXPERIENCE SUMMARY :
** Total 3+ years of experience in Industrial Automation domain as DCS programmer, DCS tester.
** Experience in Installation and Configuration of 800xA (Product of Asea Brown Boveri) DCS system.
** Extensive Involvement in Stages of HMI Development life cycle like requirements, Development, Implementation and Support.
** Experience in DCS Programming (Development of process graphics and logic).
** Having experience in Modbus – TCP and RTU Serial Communication mapping Design and Communication Establishment.
** Basic Knowledge on control panels.
** Got Bravo Bronze award for high productivity in short span.

SKILL SET :
Controllers AC800M, AC450, AC410.
DCS : 800XA System 5.1, FP4 (ABB), Centum VP, CS3000 (Yokogawa)
RTU RS-232/RS485
Communication Protocols OPC, Modbus, TCP/IP, Profinet
Tools Used 800xA System, Control builder, Control Builder M (Programming Tool), Function chart Builder, Process Graphics 2- PG2
Languages Basics of C, C++ concepts.
Operating Systems : Windows XP/2003 Server/2008Server(x64)/Vista/Win7(x64).

EDUCATIONAL PROFILE :
BE in Instrumentation Technology from RNSIT Bangalore (VTU University) in 2011.
Diploma in Electronics instrumentation & control engineer from P.V.P Polytechnic in 2006.
S.S.L.C from Deccan Educational Society Bangalore 2003

TRAININGS :
** Completed ITP (Initial Training Program) which includes introduction to 800xA, FCB Essentials, PG2, Control builder module and Structural type plant designing.
** Completed ITP (Initial Training Program) which includes introduction to Centum VP, CS3000, function Chart Builder Essentials.
** Completed ITP (Initial Training Program) which includes introduction to Reuse Standard Library configuration

EXPERIENCE SUMMARY :
Present Employer : ABB GISL (Asea Brown Boveri Global Industries & Service Limited) Through SI Global Private Ltd.
Designation : Project Engineer.
Duration : April-2012 to Till Date.

Previous Employer : YIL (Yokogawa India Limited, Bangalore) Through Softec Services.
Duration : May-2011 to Feb-2012.

PROJECTS – ABB :
** Project Title : BG Trinidad & Tobago.
Client : United States
Duration : From 3 month on going
Team Size : 2 Members.
Description : Control System Replacement.
Role and Responsibilities :
** Software Application Design.
** Involved in Control System Architecture Design.
** IO Allocation for Process control System.
** Loading controller.
** Development, Modification and Testing of Graphics on 800xA system as per Client requirement.
** Logic Development on Control builder as per requirement of customer.
** Development of different control modules using CBM
** Assigning I/O Variables and Hardware Configuration.
** Simulating the logics through soft controller.
** Modbus – TCP and RTU Serial Communication Mapping design and communication establishment.
** Understanding and Interpretation of FDS.
** Development of HMI Static and Dynamic Screens using simplicity.
** Attending the FAT(Factory Acceptance Test) for involved project to do changes and modification as per customer requirement
** Customization of faceplate/element of graphics, Engineering units, Alarms priorities and selecting security levels.

** Project Title : Hebron - FPSO.
Client : Canada
Duration : 6 Months
Team Size : 3 Members.
Description : HMI Development and testing.
Role and Responsibilities :
** Development of HMI Static and Dynamic Screens using Cimplicity.
** Understanding and Interpretation of FDS.
** Attending the FAT(Factory Acceptance Test) for involved project to do changes and modification as per customer requirement
** Customization of faceplate/element of graphics, Engineering units, Alarms priorities and selecting security levels

** Project Title : Jordbaer - FPSO
Client : Hyundai Heavy Industries, Korea.
Duration : 4 Months
Team Size : 3 Members.
Description : HMI Development and testing.
Role and Responsibilities :
** Development of HMI Static and Dynamic Screens using simplicity.
** Understanding and Interpretation of FDS.
** Attending the FAT(Factory Acceptance Test) for involved project to do changes and modification as per customer requirement
** Customization of faceplate/element of graphics, Engineering units, Alarms priorities and selecting security levels

** Project Title : Goliath - FPSO
Client : ABB Norway
Duration : 4 Months
Team Size : 6 Members.
Description : HMI Development and testing.
Role and Responsibilities :
** Development of HMI Static and Dynamic Screens using simplicity.
** Understanding and Interpretation of FDS.
** Attending the FAT(Factory Acceptance Test) for involved project to do changes and modification as per customer requirement
** Customization of faceplate/element of graphics, Engineering units, Alarms priorities and selecting security levels.

** Project Title : Sleipner
Client : ABB Germany.
Duration : 4 Months.
Team Size : 3 Members.
Description : Library Development and Up-gradation.
Role and Responsibilities :
** Development of graphics elements and faceplate as per TR1212 FDS.
** Testing of graphics element on online builder.
** Preparing Design Document.
** Preparing Test Specification.
** Preparing code proposals