VP www.petro6.com Engineers Consultants Pvt Ltd Chennai : PDMS PDS Piping Engineer

[Admin]

CAREERS

VP Petro6 Engineers and Consultants Pvt Ltd is committed to develop and train the new generation engineers in Oil and Gas engineering design to cater for the exponential requirements of experienced personnel in the Industry world wide.
In view establishing the team, we are seeking capable, self-driven and energetic professional Oil & Gas design personnel for the following positions.

Candidates should be committed to Quality and Safety, Innovative and a Pro-active approach to Engineering and Design activities. Experience in Engineering Design and a thorough knowledge of relevant codes & standards, Good communication skills, with fluency in English (both written and spoken), are essential requirements.

Lead / Senior Structural Engineer: Must posses Bachelor’s/Master’s degree in Civil / Structural Engineering. At least 12 / 7 years of experience in conceptual studies, FEED, detailed design & engineering. Prior knowledge of SACS and STADD Pro software will be considered as a suitable qualification.

Lead /Senior Process Engineer: Must posses Bachelor’s/Master’s degree in Chemical Engineering. At least 12 / 7 years of experience in conceptual studies, FEED, detailed design & engineering. HAZOP and design reviews, also pre-commissioning and commissioning procedures and activities. Process experience will include onshore & offshore upstream oil production and gas processing facilities. Experience in conducting process simulations particularly with HYSYS is essential. Familiarity with Process Hazard / Risk Analysis is advantageous. Responsibilities will include development of PFD’s, P&ID’s, UFD’s & data sheet including sizing and specification equipment & instruments.

Lead / Senior Electrical Engineer: Must posses Bachelor’s/Master’s degree in Electrical Engineering. At least 12 / 7 years of experience in basic electrical engineering design including preparation of single line diagrams, schematic diagrams, load flow analysis, short circuit analysis, motor starting analysis, transient stability analysis, ground grid design, relay coordination and setting calculations, transformers, MCC’s, cable sizing, lighting calculations, electrical equipment specification and layout etc. Shall be familiar with Hazardous Area Classification and be conversant with design software like EDSA, ETAP or CYME.

Lead / Senior Instrumentation Engineer: Must posses Bachelor’s/Master’s degree in Instrumentation Engineering. At least 12/7 to years of experience in conceptual studies, FEED, detailed design & engineering, and demands high levels competencies in the development of specifications, engineering and design for the procurement, installation and integration of systems and instrumentation. Hands on experience with INTOOLS will be an added advantage. Extensive experience of DCS / SGS / F&G systems is essential, as is experience of SCADA and communication networks. Familiarity with conducting and implementing safety studies is also desirable.

Senior Piping Engineer: Must posses Bachelor’s / Master’s degree in Mechanical / Chemical / Piping Engineering. At least 7 years of experience in design and engineering of piping and equipment layout. Capable of independently producing design calculations, MTO’s, bill of material, review of isometric drawings, specifications, conducting drawing review and vendor design evaluation. Should be familiar in preparation of shop drawings for fabrication. Must be familiar with relevant design & API, ANSI, DIN, BS codes and experience with CAESAR II software for stress analysis. Exposure to PDMS/PDS piping 3D design review is essential.

Engineers: Structural / Process/ Piping / Mechanical / Electrical / Instrumentation.
Must posses Bachelor’s/Master’s degree in Mechanical / Electrical / Instruments and Controls Engineering with minimum 4 years of experience.

Trainee Engineers: Structural / Process/ Piping / Mechanical / Electrical / Instrumentation.
Fresh Graduates with Bachelor’s/Master’s degree in Mechanical / Electrical / Instruments and Controls Engineering.

Senior Designers - Structural / Piping / Electrical / Instrumentation: Must posses Diploma or ITI Draftsman’s Certificate as minimum with at least 7 years of experience in respective discipline. The role involves leading small teams of designers and draftsmen in the preparation of CAD models using PDMS /PDS, design drawings, layouts and shop drawings for onshore and offshore facilities. This will involve working closely and interacting with the relevant discipline engineers to develop technical solutions in an efficient and pro-active manner. Activities also include checking of work performed by others, the generation of bills of materials for estimating and procurement purposes and detail design of facilities.

Structural / Piping / Electrical / Instrument Designers: Must posses Diploma or ITI Draftsman’s Certificate as minimum with at least 4 years of experience in respective discipline. This will involve working closely and interacting with the relevant discipline engineers to develop technical solutions in an efficient and pro-active manner.

Interested candidates must apply in complete with latest bio-data and recent passport sized photograph clearly highlighting the relevant position applied to hr@petro6.com or by filling out this form online.

http://petro6.com

CONTACT US

Registered Office:
VP Petro6 Engineers and Consultants Pvt Ltd
III Floor, Module 34,
ELNET Software City,
Rajiv Gandhi Salai (OMR),
Taramani, Chennai – 600113
TamilNadu, INDIA.

E-mail address:
Jobs : hr@petro6.com

[Guest-IJT]

RESUME
DHANESH KUMAR M
PIPING ENGINEER
E mail : dk AT daffodils AT yahoo.co.in

Objective :
To meet the industry standards as a Piping Engineer and intend to build a career with leading corporate of hi-tech environment.

Seeking a challenging and interesting interim / contract role which could utilize my broad skills and experience.

Career summary :
Ability to interpret codes and guidelines of Classification Societies such as Det Norske Veritas & Piping standards such as JIS & ASME.
Have exposure to industrial quality standards and having good interpersonal and communication skill.

Key Skills :
Designing and Modeling Skills.
Quick learning capability of designing Software.
Team Management.
Project Management
Leadership

Personal data :
Date of birth : 21-05-1983
Marital status : Single
Languages known :
English,Malayalam,Tamil,Hindi.
Passport No : F 8368987
Place of issue : Cochin
Date of Expiry : 20-06-2016
Qualification : B Tech
Degree : Production Engg.

Professional Experience :
From JULY 2007 to till date : Astaldi Arabia Ltd, Qatar Branch
Position : Piping Engineer
Client : Snamprogetti, Owner: QATOFIN
Project Name : QATOFIN LLDPE PROJECT, Project No. 315300
This is expansion project of Qatofin LLDPE Project (Linear low density poly ethylene)
Many pipes of minimum size 1/2” to maximum size 48” in different materials like carbon steel, stainless steel, HDPE, RTR & GRP/GRE piping.
Job description :
Plan and schedule activities.
Coordinating with Planning dept on work progress.
Coordinating with QA/QC dept for quality approvals.
Generating As Built drawings and coordinating with technical dept for client approval.
Coordinating with Superintendent and Construction Manager on work execution.
Coordinating with fabrication shop on spool delivery.
Coordinating with resources dept on material delivery.
Test pack preparation, gravity testing & pressure testing.
Project documentations

From JULY 2006 to JUNE 2007 :
Organization : TEBMA Shipyards LTD
Department : Piping
Designation : Junior Piping Engineer
Duration : 1 YEAR
Project : Platform Supply Vessel
Job description :
DESIGN.
Developing Pipe Routing and Layouts in AutoCad.
Generating Fabrication and Erection Drawings from 3d models.
Generating Bill of Materials for Spools & Fittings.
Design / Generate pipeline supports as per Yard & Classification Society standards.
Design and Development of 3D Model of Marine equipments & structures.
Updation of Fluid Systems & Arrangement drawings as fitted.
Co-ordinating with Production department for upgrading arrangement drawings.
Study structural ship drawings to finalize pipe piercing.
Corresponding with Classification Society for approval of P & ID and arrangement drawings.
Coordinate with various departments for developing composite layout of ship blocks.

PRODUCTION :
Inside tank routing.
Tank testing.
Pressure testing.
Fabrication & erection.

IT Skills :
CAD/CAE Package Modules
Pro/E Wildfire 2.0 - Pro/Part,
- Pro/Assembly,
- Pro/Drawing,
- Pro/Surface,

AutoCAD 2006
- 2D Drafting
- 3D Modeling,
- Plotting.

Solid Works 2005 - Part,
- Assembly,
- Piping,
- Surface design,
- Drawing.

OS and Language Exposure
- M.S.Office
- PDF & JPG Image files

ACADEMIC QUALIFICATIONS :
Year Institution Degree Name (university) Aggregate Marks :
2002-2006 Govt. Engineering College, Thrissur, Kerala. B.Tech in Production Engineering. (CALICUT UNIVERSITY) 63.5
2000 S D COLLEGE ALAPPUZHA Pre Degree (KERALA UNIVERSITY) 62
1998 G M H S S AMBALAPUZHA S.S.L.C. 73

DECLARATION :
I hereby declare that the information furnished above is correct in my knowledge and belief.
DHANESH KUMAR M

[Guest]

SAROJ KUMAR PANDA
EMAIL : sarojpanda63 AT yahoo.com
Career Objective :
To secure a challenging position where I can effectively contribute my knowledge as a Technical line Professional, possessing competent Technical Skills.
Educational qualification :
Siet, dhenkanal under BPUT(67.78 cgpa,2010)
Bachelor of technology in electrical engg.
Bhubanananda Orissa school of engg. ,under SCTE& VT(70%,2007)
Deploma in electrical engg.
Salipur college, salipur under CHSE (52.7%, 2004)
Intermediate in science
Bhagabati bidyapitha sukleswar under bse ,Orissa(77.78%,2002)
Matriculation
Work Experience :
Electrical Engineer trainee in MDRPCG powerplant from 10 july 2010
Shift in charge in MDRPCG powerplant from 1st December 2010
- Analyze electrical drawings and specifications (control ckt).
- Make engineering calculations in connection with field and office assignments.
- Trying to investigate problems and recommend solutions.
- Ensure compliance with safety requirements and standards procedures.
- Coordinate people with other departments, outside agencies, contractors.
Training :
- 30 days training summer training at ORISSA POWER TRAINING CENTER CHANDAKA,ORISSA(OPTCL).
- 1 day study tour to NTPC ,KANIHA,ORISSA.
- Industrial visit to ALPHA TRANSFORMER,BBSR,ORISSA.
Point For Self :
Optimistic in nature.
Good learner.
Manage myself in every situation.
Willing to work in a group.
Strength :
1. My Knowledge & Behaviour.
2 Sharing ideas with others.
3 The ability to Work in a team.
4 Keen to Work hard.
5 Positive Attitude.
6 Can Motivate others.
7 Interest to Achieve set targets in stipulated time.

[abdul ateeq]

sir please go through my cv for tranee engineer
Curriculum Vitae
Abdul Ateeq shaik
Email :abdulateeq1988 AT gmail.com
PIPING ENGINEER +1years Experience
Career Objective :
Looking for a challenging and demanding position in Piping Design and Engineering in a growth oriented Mechanical Consulting, Contracting, Construction organization to render professional skills and add value to organizational growth and objectives.
Software skills :
- Piping Drafting : - Auto CAD, Solid Edge V19
- Engineering Analysis : - CEASER- II (STATIC analysis)
- Piping Designing Software’s :- PDMS, SP3D
Academic Qualification :
- B.E (Mechanical Engineering) from VTU University, Guru Nanak Dev Engineering Bidar, karanataka With Agg.66 %( 2006-2010).
- PG Diploma in Process Piping Design & Engineering per ASME B31.3 from Institute of Piping Engineering and Building Services, Hyderabad.
- Intermediate (PUC) from Board of Pre university Education, Guru Nanak Pre university College Bidar With 66 %( 2006).
- SSLC from Central Board of Secondary School Education (CBSE), Guru Nanak public School, Bidar, Karnataka,(2004)
Professional Profile
Working in CHANDRAA ENGINEERING SERVICES, Vengal rao Nager, Hyderabad from Jan 2011 to till date.
Worked in TECHNO PLANT SOLUTIONS, Moosapet, Hyderabad from Jun 2010 to Dec 2010.
Professional summary
CHANDRAA ENGINEERING SERVICES
Project # 1
Project Title : demethanization.
Client : Larsen & Toubro Limited-Baroda (Energy Centre).
Software used : Smart plant 3D.
Responsibilities :
- Responsible for the 3D modeling of Piping, Pipe Supports, Equipment Smart Plant 3D (SP3D).
- Responsible for doing consistency checking for Pipelines using SP3D.
- Maintain all quality related issues.
- Checking isometrics wrt P&ID.
- Equipment modeling, checking nozzle orientation, Vendor data checking.
- Line routing in SP3D, clash removing & pipe supporting as per standards.
- Error resolving model.
Project Description
This is a demethanization project. Scope of this project is 70% work is completed by client side remaining 30% work is done by us. This project mainly involves crude oil separation and treatment. The process of distillation in which methane is separated from the heavier components.
TECHNO PLANT SOLUTIONS
Project # 1
Project Title : 1100.
Client : Thyssen Krup Pvt Limited.
Software used : PDMS.
Responsibilities :
- Equipment Modeling and assembling as per vendor drawing and equipment layout.
- Piping modeling as per P&ID, Piping layout, instrument hook up, piping material specification.
- Extraction of Isometrics in ISODraft.
- Structural modeling-Beams and Columns (Modeling of equipment Rack, pipe Rack) Panels & plates, ASL Modeler.
- Checking of GA Drawing with respect to P&ID.
- Preparation of supports as per support standard.
Technical skills :
- Proficient in Preparation of Isometric drawings
- Proficient in preparation of MTO
- Proficient in developing Plot Plan, Pipe Rack calculations
- Knowledge of ASME codes
- Familiar with P&ID, PFD, Plot plan, Equipment drawings etc…
- Familiar with International design codes & standards.viz : ANSI/ASME,API,BS,
ASTM & there use in design, analysis and calculation.
- Pressure design of process piping and components as per ASME B31.3
- Pipe thickness calculations, Expansion loop design.

[Guest]

CURRICULUM VITAE
N.SUBHASH
Email : nsubhashmech AT gmail.com

CAREER OBJECTIVE :
To work in a challenging and dynamic environment and to keep adding value to the organization and concurrently upgrading my skills and knowledge.

PROFESSIONAL SUMMARY :
Highly organized and dedicated with positive attitude.
Have excellent written, oral and inter & intra personal communication skills.
Thrive on working in challenging environment.

EDUCATIONAL DETAILS :
B.E (Mechanical) – Anna University – 73%
Diploma (Mechanical)– Maharashtra university(MSBTE)-57%
X –Maharashtra university (MSBTE)– 57%

COMPUTER PROFICIENCY :
I used the platforms Windows XP/Vista
I used the packages MS-Office

PERSONAL TRAITS :
Good inter-personal relationship and communication
Hard and ethical worker.
Good Team facilitator.

EXPERIENCE DETAILS :
Company Name : GUINDY MACHINE TOOLSLTD
196, Tambaram - Velachery main road,
Pallikaranai,Chennai.
Experience : Presently working from nov 2010 to till date
Department : Coordinate Measuring Machine(CMM)
Position : Engineer Trainee
ROLES & RESPONSIBILITIES :
Knowledge in CMM Inspection and GD&T methods.
Knowledge of Vision inspection system (VMS).
Handling in-house quality issues.

Previous employer :
Company Name : BALIGA LIGHTING EQUIPMENTS LTD CHENNAI (KOVILAMBAKKAM )
Experience : One Year from Oct 2009 to Oct 2010
Department : Quality Assurance.
Position : Quality enginer.
ROLES & RESPONSIBILITIES :
In process Quality in Machine shop.
Layout inspection of new product after machining (Aluminum Enclosures).
Daily Rejection Monitoring analysis and action plan.
Quality approval for new sample job at vendor end.

PROJECT UNDERTAKEN :
MAIN PROJECT : “ DESIGN AND FIXTURE OF GUIDE BEARING HOUSING ”
MINI PROJECTS : “AUTOMATIC PNEUMATIC CLAMP MACHINE”
DIPLOMA : “AUTOMATIC VERTICAL FILING MACHINE ”

EXTRA CURRICULAR ACTIVITIES :
Drums Player
Playing cricket,football etc.

[anubhabpatra]

Anubhab Patra
Email : anubhabpatra AT gmail.com

TECHNICIAL EXPERIENCE :
- Astute professional offering 2 years and 10 months of rich exposure across terminal automation and good knowledge in batch controller, terminal server, EBI and access control server.
- Calibrations of servo gauges through Communication Interface Unit through Ensite software.
- Maintenance of servers as well as the maintenance of SQL database and SAP-TAS server.
- Having very good site experience in solving the problems regarding PLC and SCADA, Designing and developing HMI screens as per customer requirements and satisfying them all the times.
- Good site knowledge in troubleshooting of different field instruments like pressure transmitter, temperature transmitter, card reader, movs, earthing relay, batch controller, pd meter, dcv, strainer, pulse output devices etc.
- A systematic, organized, hardworking team builder with an analytical bent of mind and reliable as a fully contributing, responsible & accountable member of task/project teams.

EXPERIENCE :
- Working as a Senior Engineer for FLOWTECH ENGINEERS from February 2010 to till date
- Worked as a Resident Engineer for HONEYWELL AUTOMATION INDIA LTD. through an outsourcing in Bharat Petroleum Corporations Ltd. from June 2008 to February 2010.

EDUCATION :
- Bachelor of Engineering in stream of Electronics and Instrumentation Engineering from BPUT, Orissa with first class.

TECHNICAL SKILLS :
Tools : Versapro
PLC : GE Fanuc 90-30, GE Fanuc 90-70
Instrumentation : Sensors, Transducers, Calibration
Operating system : Windows XP/2000
Database : Oracle 8i

Professional Experience :
Project#1
Project Name : Terminal Automation System, BPCL – Koyali, Vadodara, Gujarat
Client : BPCL (Bharat Petroleum Corporation Limited), India.
Role : Site Engineer
Description :
This project is developed for dispatching of petroleum products like Motor Spirit, High Speed Diesel, Superior kerosene Oil, Speed, Hi-Speed through out the state .HAIL has provided PLC and SCADA systems including PLC hardware and software products, SCADA software required to get the information from PLC, Field devices and display it on HMI screens.
- Maintenance & Troubleshooting of Plant Scape Scada system & making up of related tasks.
- Testing & Calibration of Different type of Transmitters, Batch controllers (CMR-K) and liquid control flow Meters.
- Maintaining the plant instruments like Card Readers, Earthing Relays, and Positive displacement Meters, Strainers, Batch Controllers and Digital control valves.
- Testing & Calibration of Different type of Transmitters, Batch controllers
(CMRK& CONTREC).
- Maintaining the access control system (EBI – Enterprise Buildings Integrator).
Environment : Windows XP, HMI Display Builder

Project#2
Project Name : Terminal Automation System, HPCL –Nandesari, Vadodara, Gujarat
Client : HPCL (Hindustan Petroleum Corporation of India Limited), India.
Role : Senior Engineer
Description :
This project is developed for dispatching of petroleum products like Motor Spirit, High Speed Diesel, Superior kerosene Oil, Speed, Hi-Speed through out the state .HAIL has provided PLC and SCADA systems including PLC hardware and software products, SCADA software required to get the information from PLC, Field devices and display it on HMI screens.
Responsibilities :
- Worked with AST based island controller.
- Worked with DANLOAD based batch controller for product dispatching and as well as for product controlling through Positive Displacement Meter (POD).
- Done the calibrations for different products in different flow meters through proving tank.
Environment : Windows XP, HMI Display Builder

[edwin_justus]

CURRICULUM VITAE
PIPING ENGINEER - Design 8+ years (Experience)
edwin_just AT yahoo.com edwin.justus AT gmail.com
OBJECTIVE :
Aspiring to work for an organization where there is a scope for achievements, continuous learning to improve conceptional skills while contributing to the growth of the organization.
ABILTY SUMMARY :
-Piping Layout Engineer -Piping Material Engineer -Piping Stress Engineer
-Estimation (Man-hours, Prebid)
This is for both ONSHORE & OFFSHORE oil & gas projects.
WORK EXPERIENCE :
-Working as Sr Engineer in M/S. Saipem Triune Pvt Ltd. (Delhi) ( From Sept 2008 to till date)
-As Piping Engineer in M/S. Petrofac Intl LTD. (Sharjah) (From April 2007 to August 2008.)
-As Piping Design Engineer in M/S. Samsung Saudi Arabia. (From Dec 2005 to April 2007)
-As DESIGN ENGINEER in M/S. Kavya Engg. Services (From April 2003-December 2005.)
NATURE OF WORK :
Power plant & Process plant Piping
- Technical correspondence (IDC/R/E-mailing/discussion) .
- 2D/3D drafting using drafting tool AutoCAD, PDMS, and PDS.
- Well conversant with international codes & Standards ASME,ANSI,API
- Preparation/Review of material specification, VMS,TBA, TQ, MR, PS
- Preparation/Review of Plot plan, Equipment Layout, GAD(Piping)
- Drawing of layouts level wise (according to elevation)
- Preparation/Review of Isometrics (Model/GAD).
- Preparation/Review of Preliminary and final MTO
- MTO using customer codes, Line wise, summary etc
- Ensuring quality for documentation and drawings
- Checking of Interference, Placing supports and its details
- Stress analysis using CAEPIPE, CAESAR- II
PRESENT PROJECT WORKING :
- KNPC (IRT pipeline onshore project) at M/s Saipem Triune for ISCO working at Kuwait
MAJOR PROJECTS ASSISTED :
- ONGC (ICP offshore project) at M/s Saipem Triune
- KNPC (NEW FGRU onshore project) at M/s Saipem Triune
- ONGC (PMC job /NHRC offshore project) at M/s Saipem Triune
- Vietosprov (RC-4 offshore project) at M/s Saipem Triune
- Karachagnak phase –IV (Onshore project) at M/s Petrofac Intl
- Tasnee Ethylene (Onshore project) at M/s Samsung Saudi Arabia
- PDO-Lekhawair. (Onshore project) at M/s KAVYA Engg Services.
The above are Oil & gas/Petrochemical projects. Few of them are Revamp/New facilities (expansion project). Pipe Routing, Preparation/Review Plot plan, Equipment Layout, GAD (Piping) and Isometric are the job key role. Work is done using PDMS/PDS, AutoCAD, specifying the bill of materials, estimating the required materials, referring the P&Ids and checking the isometrics, Creating the detail engineering from isometrics. Also performing stress analysis using CEASAR-II. MTO using manual, software such as IPMS, IPGS etc. Preperation of PMS/VMS. Raising TQs from vendor documents, TBA for each item. Preparation of Purchase Specification.
SMALL PROJECTS ASSISTED :
- VASAVADUTTA - 1x9.5MW. Karnataka, India. (Machine mounted piping)
- HNPL –1x7MW, Kerala, India. (Machine mounted piping)
- SAIL-Rourkela. (Machine mounted piping)
- GACL. (Power, Lube oil, Interconnecting piping)
- RNPL-Surat. (Power, Lube oil, Interconnecting piping)
- MCL. (Power, Lube oil, Interconnecting piping)
The above projects are packages; Design is done for pipe routing which are around Machine mounted base plates. Especially for lube oil, seal gas, governing oil piping. The duties are to prepare Plan, Isometric, Bill of material etc. With the following inputs such as equipment layout, P&IDs, Material specifications. 3D modeling using PDMS. Piping, Structural around the machines such as turbine, compressors.
PROFESSIONAL QAULIFICATION :
- Bachelor Of Technology (Mechanical)
Passed in April 2003, JNT University, Hyderabad.
- Trained in B.H.E.L for PDMS for there projects whose support was provided by Kavya Engineering.
COMPUTER PROFICIENCY :
- MS-Office, MACRO programming, Web Browsing,
- AUTOCAD, (drafting soft ware)
- PDS, PDMS, Autoplant (modeling soft wares)
- CAEPIPE, ANSYS, CAESAR- II (Analysis soft wares)
STREGNTHS :
- Good adaptability, Team Supporter, Hardworking.
- Self motivated individual, Building up team management.

[Guest]

RESUME
R. NANDHAKUMAR.B.E.
Email ID : rnandha_rpn AT yahoo.com

OBJECTIVE :
Seeking a position to utilize my skills and abilities in an organization that offers security and professional growth while being resourceful, innovative and flexible.

ACADEMIC QUALIFICATION :
Course Institution Board/ University Year of completion Percentage :
B.E., Mechanical Ganadipathy Tulsi’s Jain Engineering College, Vellore Anna University 2007 – 2010 75%
Diploma D.M.E., Sri Venkateswara Polytechnic College, Vellore Dote 2003 – 2006 80%
S.S.L.C., Govt. Hr. Sec. School, Vellore. State Board 2000 – 2001 50%

SKILL SET :
- D.C.A., (Diploma in Computer Application)
- PDMS (Plant Design Management System)
- AUTOCAD – (Mechanical cad & piping cad)

EXPERIENCE - Diploma Experience
Two years company Trainee in Patten Making Supervisor, at Brakes India Ltd (Foundry Division), Sholinghur.
Role Responsibilities :
- Process Control – Process Sheet and Paper Works.
- Quality Control – Final Inspection.

PRESENT WORKING DETAILS :
Designation : Asst.Quality Engineer – Press Tool & Mould Box
Organization : Helix Tooling Services, Vellore – 632 004
Period of service : May 2010 – Till Date.
Role Responsibilities :
- Design and Developing of Press Tool and Injection Moulds. Using CAD
- 2D Sketch to 3D Model Conversion of Part.
- Creating Marked up Prints.

Project References :
- Tamil Nadu Explosives Limited (TEL), katpadi, India.
- Vellore fine products (unit of VIT) Vellore, India.
- Breaks India limited, - foundry division, and sholinghur.
- T.I.Metal forming, Chennai.
- WORTH Plastics Vellore.

Industrial Projects :
Title : Modeling Of Crankcase and Mold Cavities.
Client : Brakes India Limited, Sholinghur.
Software used : Auto Cad

Title : Bracket Front.
Client : TVS – Lucas, Chennai.
Software : Auto Cad. & Pro-E.

ACADEMIC PROJECT DETAILS :
- Diploma : A project on “Fabrication of Solar Fan”
- Engineering Mini Project : Fabrication of House Trolley Hydraulic Jack
- Engineering Main Project : Design And Fabrication of Co – ordinate Drilling Machine (CDM).

ELECTIVE SUBJECTS :
- Production Planning And Cost Estimation
- Nuclear Engineering

LANGUAGES KNOWN :
- Tamil
- English
- Telugu

[Unregistered]

Anwar deen M.
E-Mail :manwardeen73 AT gmail.com

CAREER OBJECTIVE :
To be an integral part of the organization where my trials and caliber will be suitably rewarded and grow together with the organization.

STRENGTH :
** Flexible and versatile to adapt to any new environment.
** Thrive in both independent and collaborative environment.
** Self-starter, self-motivated and quick learner.
** Active, self-confident and energetic player.

EDUCATIONAL QUALIFICATION :
** Studied B.E.(Mechanical Engg.) in Odaiyappa Engineering College, Anna University, Thirchy with an aggregate of 73.60%
** Completed HSC in 2008 from Ponnu Matriculation Higher Secondary School, Dharapuram with an aggregate of 73%
** Completed SSLC in 2006 from Ponnu Matriculation Higher Secondary School, Dharapuram with an aggregate of 59%

TECHNICAL SKILLS :
Design software : Auto Cad 2D&3D-2013, Cadworx Equipment,
Cadworx Layout, Cadworx PI&D, Ceaser-2.
Programming Languages : C, C++
Operating Systems : Windows XP/7
Packages : Ms-Office

CERTIFICATION COURSE :
** I Completed my Advance Diploma in Pipe Design Engineering(ADPE) on IMAGE GRAFIX Engineering Service Pvt.Ltd.at Chennai.

AREA OF INTEREST :
** Pipe Design Field
** Production field
** Automobile field

MINI PROJECT :
PNEUMATIC AIR SUSPENSION SYSTEM USING AIR BALOONS

PROJECT UNDERGOING :
Project Name : FABRICATION OF EXAUST GAS RECOVERY POWER
GENERATION SYSTEM BASED IN POWER PLANT
Tools : POWER PLANT
Description : BY USING NATURAL GAS (METHANE) TO PRODUCE ELECTRICAL POWER.

CERTIFICATION :
** In-plant training from(05\12\11 to 10\12\11) (7 days) at pioneer power plant limited, 52.8MW Combined Cycle Power Plant in Ramanathapuram district

WORKING EXPERIENCE :
** Am worked on M/S Amman Auto Private Limited In Singanalur-CBE, Ashok Leyland LCV-Dealer.
** As service advisor From Sep 2012 To Sep 2013

DUTIES AND RESPONSIBILITIES :
Attending customers and opening job cards in SAP/DBM. Ensuring to the all demanded requires by customer has been completed. Billing the customer job card. Delivering the vehicle to customer after completion of work follow up calls to customer after delivery.

PERSONAL PROFILE :
Father’s Name : K.Mohamed Jinnah
Date of Birth : 11.07.1991
Gender & Age : Male, 22
Marital Status : Single
Nationality : Indian
Linguistic Abilities : English, Tamil, Urdu(Read)
Hobbies : Listening to Tamil music, playing cricket

DECLARATION :
I hereby declare that all the details furnished above are true to the best of my knowledge and belief.
Place : Dharapuram
Date :
ANWAR DEEN M.