www.paecindia.com Power Age Engineering Consultants Pvt Ltd Mumbai : Power Plant Engineering

[Admin]

About the Company:
Power Age Engineering Consultants Private Ltd (PAEC) a company, engaged in consulting and training, was incorporated in the year 2000 with its registered office at Vashi, Navi Mumbai, India.
paecindia.com

PAEC EMPLOYMENT OPPORTUNITIES
PAEC provides a wide range of services for new power plant development and operating power plant support.
PAEC frequently has needs for experienced personnel in the following areas:
****Design and Analysis
****Power Plant Engineering
****Quality Assurance
****Project Management
Interested candidates please submit their CV/Resumes to
paec@paecindia.com

Office Address:Office-387, Third floor, Central Facility Bldg. No: 2, APMC Market- 2, Sector-19, Vashi,
Navi Mumbai- 400703

Tel: +91-22-27666688, +91-22-41237423
Registered Office:
A-236, First floor, Vashi Plaza, Sector-17, Vashi, Navi Mumbai- 400703

http://paecindia.com/

[prashant_ei2005]

PRASHANT SINGH
Email: prashant_ei2005 AT yahoo.com
Phone: +91-9884726722

OBJECTIVE
To associate with an organization where there is an ample scope for organizational as well as individual growth. Seeking a position where I can utilize my skills and abilities to the fullest while being resourceful, innovative and flexible.

EDUCATION
Qualification Year School \ College Board/University %
B.E. Electronics & Instrumentation 2008 Hindustan College Of Engineering Anna University 63.0
DIPLOMA Electronics & Communication 2003 PES Polytechnic DTE, Karnataka 65.5
HSLC 1998 Kendriya Vidyalaya CBSE 58.0

TRAINING
- Trained in AB PLC, Siemens 200, and Ge Fanuc.
- Certified in PLC and SCADA from Sofcon Pvt. Ltd of UP.
- Certification in PLC and SCADA for three month from Prolific Automation System of Chennai.
- SAP Training at Ruchi Soya Industries Ltd Company (Module PM).

WORK EXPERIENCE 24 MONTHS
Instrumentation Engineer, Ruchi Soya Industries.
- Plant maintenance and plant scheduling (SAP).
- Plant maintenance of field instruments like Control Valves, Actuators, RTDs(PT100), Pressure Transmitters, Temperature transmitters, Feedback Sensors (Limit Switches & Proximity Sensors), weighing scales( ESSAE – Teroka, PERFECT).
- Experience in VFD- Variable Frequency Drives (Delta , Danfoss and ABB)
- Maintenance of ISO reports recording company statistics.
- Designing of ladder logic diagram.
PROJECTS
24 TPH Boiler Automation:
- Responsible for full automation of 24 TPH boilers.
- Designed using Siemens PLC for counters of husk.
- Communicated with Micro Max Automation Company on behalf of company.
Tank farm Automation:
- Installed 24 RADAR systems to connect all 24 tanks to PLC.
- Used 08 Corolis mass flow meter for despatch of oil from tank.
- Designed the automation of complete oil section as a part of the core team.
- Point of contact for communication with E&H Automation Company.
Netzch Filter Commissioning:
- It is a filter used to separate oil from Sterin and Olien.
- It’s having one agitator to stir oil and NEMO pump to deliver oil to filter.
- Used Siemens PLC for controlling of whole process.
- Designed the automation of complete commissioning as a part of the core team.
- Point of contact for communication with ANDRITZH Automation Company.


Responsibilities:
- Scheduling of preventive maintenance of the field instruments in the plant.
- Breakdown maintenance field instruments like VFD (Delta make, ABB make and DELTA make) Control Valve, Solenoid Operated Valve (SOV), Temperature Elements, and various types of Pressure & Level Switches, Transmitters and Limit Switches.
- Calibration programming of ESSAE TEROKA and PERFECT weighing machine for 30 kg and 05 kg.
- Ensuring ISO compliance for the activities of the department.
- Maintaining preventive and break-down work order permit in SAP Module.

Personal Details:
- Date of Birth : 14-12-1982
- Marital Status : Single
- Sex :Male
- Nationality : Indian
- Language Known : English & Hindi
- Hobbies : Travelling, Net surfing
- Current Salary :2,16000 INR per annum

I hereby declare that particulars given above are true to the best of my knowledge and belief.



Date: April 19, 2010 (Prashant Singh)

[Guest]

CORRICULUM VITAE OF MR. VIPINPRATAP M. RAO

Email :raovipin64 AT yahoo.com,vipinrao77 AT gmail.com.

CAREER ASPIRATION
Being a fresher, I am open to task which stretches my abilities to Max. Greed to learn more, wants to do things fast and aims to be solution provider.
ACADEMIC
Year Of Passing Degree Institution/University Percentage
June-11 Final Year(BE). PCE, University of Nagpur 58.73%
May-09 Third Year (TE) PCE, University of Nagpur 52.47%
May-08 Second Year (SE) PCE, University of Nagpur 53%
May-07 First Year (FE) PCE, University of Nagpur 60%
Feb-05 H.S.C (Class XII) N.E.S. junior college of arts, science& commerce. 65.17%
March-03 S.S.C (Class X) Kalva Hindi high school 73.46%
Aggregate of the all 8 semester is 55.8%
Note : In Nagpur University there is 6 subjects in each semester from third to six semester & grand total is 3000 from 2nd year to final year.
Year of joining B.E.-2006-07.
PROJECT EXECUTED
The Following are the projects I executed during course of Engineering.
- DESIGN AND FABRICATION OF STIMULATED AERIAL,TERRESTRIAL—EQUIPPED ROBOTICS VEHICLE.
Types of different field.
1. Aeronautical.
2. Defense.
3. Robotics.
Aeronautical
It would be a new dimensional shape which will give you a good gliding capability. It contains shaft where the engines can be mounted in each side.This will revolve by support bearing and it can give u a vertical lift take off.
Defense
An unmanned air vehicle which can fly in air, run on ground& can float on It is an arm man which can be used in war field.
Robotics
There is also a robotic car which can go through a step surface. It is an arm man which can be used in war field.
Our project has been categorized into three parts.
1. Main vehicle.
2. Air vehicle.
3. Smart robot.
Main vehicle
The vehicle is named as main vehicle as it contain the aircraft and smart robot inside it. The vehicle can be move with the help of wheel which is connected with servomotors.
Air vehicle
The air vehicle can travel in any direction unlike conventional aircrafts which can move in 5 directions : straight ahead, left, right, up& down.
First we will concentrate on force which will be used in flying of any objects. There are basically 4 forces acting on flying objects : lift, drag, thrust and weight.
Different components enlisted.
Propeller : It is wing blades mounted on the brushless motor which are used to generate the necessary thrust required for the take off & flying. They are made from various materials such as nylon, wood & metals.
Brushless motor : It is basically used to generate the power required for lifting as it produces sufficient thrust of 1500 rpm. The motor is operated with lithium polymer battery of 11.1 volt.
Servo motor : It is basically a step motor driven by battery. Servomotor also employed for the movements of wings in aircraft.
Camera : There is wireless camera fitted over the aircraft of sufficient pixel and range which can be used for air survilience, locating the positions and viewing the terrorists activities.
Remote control : The Remote control is a device that wirelessly controls devices such as plane, toys, etc.
Important parts of remote control.
1. Transmitter
2. Receiver
3. An antenna and circuit board inside the aero model receives signals from the transmitter and activates motors inside the toy as commanded by transmitter.
Smart Robot :
The smart robot is equipped with camera which can be used for identifying the terrorist’s activities. Metal detector is used to detect metals. It can detect different types of guns& weapons. Temperature measurement detector circuit for measuring the temperature of the fire caught places. Smoke arrangement is there which can generate artificial gas so that no one can attack it.
Area of Interest :
Jobs in automobiles, oil& gas, thermal energy, hydraulics& pneumatics,
Productions.
FEATS
1. Got first prize in kshitiz 2010 at IIT Kharagpur in Open Hardware Event.
2. 15 Days Industrial training in Mukand Industries Pvt Ltd.

[Guest]

I am Electrical Engineering graduate with 20 years of experience in execution of Power Plant Gas Turbine based /Co Generation Power Plants in Steel Plants. Also I have experience of execution of Steel Plant Projects.

[Guest]

Curriculum vitiate
Name : Surendranath J. Jadhav
Email id :sjjadhav12345 AT rediffmail.com
: surendranath.jadhav AT bilt.com
Objective :-
To seek my position to utilize my skill, experience & abilities in your company and knowledge for organisation contributing growth & prosperity of organization.
Personal skill :-
Comprehensive trouble shooting ability, good verbal & written communication skill
Educational Qualification :-
- Passed three years Diploma in Mechanical Engineering in 1994 from Govt. Polytechnic, Aurangabad.
- Passed second class Boiler Proficiency Engineer examination in 1997 from Govt of Maharashtra.
- Passed ‘Energy Manager ’National certificate Examination from beauro of energy efficiency, Ministry of Power,Govt. Of India in 2005.
Experience :- 17 years
Presently working with M/S Ballarpur Industries ltd, Unit : Ashti, as a Asst. Manager (Utility) From November 2005.
Job Profile :
- Operation & maintenance of FBC water tube boiler having capacity 30 TPH.
- Handling operation & maintenance of coal handling plant having capacity 10TPH.
- Handling operation of D.M.Water treatment plant having capacity 30cu.m/ hr.
- Handling operation & maintenance of CPT Make reciprocating air Compressors having capacity 710 cfm (04 nos)
- Having operation & maintenance of water treatment plant having capacity 6000m3/day.
- Handling operation & maintenance of Effluent treatment plant having capacity 6000 m3/day.
- Environmental & Energy Management.
Other Activities :-
- Process energy optimization.
- Efficiency evaluation of thermal utilities in whole process.
- Man & material management.
- Performance evaluation of air compressors, Boilers, centrifugal pumps, fans & blowers, cooling towers.
- Carried out TQM programme.
- Implementation & maintaining QMS , EMS & OHSAS standards.
- Implementation of 5 S system
- Carried out thermal & electrical energy audit.
- Have worked with M/S Global Boards ltd, Mahad, Dist : Raigad , as a Officer –Utility from December 1999 to November 2005.
Job Profile :-Operation & maintenance of the followings
- TBW make oil fired boiler – 32 TPH & working pressure 15 kg/cm2.
- Non IBR Boiler , 860 kg/hr with working pressure 15 kg/cm2.
- Soft water treatment plant having capacity 10m3/hr.
- CPT make reciprocating air compressor having capacity 230 cfm(04 nos)
- Atlas compo screw air compressor having capacity 838 cfm.
- Elgi make air compressor having capacity 920 lpm (03 nos)
- Water recycling plant having capacity 3500 m3/day.
- Effluent treatment plant having capacity 3500 m3/day.
- Have worked with M/S Kasat Paper mills ltd,Pune as a Asst. Boiler Engineer From June 1997 to December 1999.
Job Profile :-Operation & maintenance of the following boilers
- Coal fired water tube FBC boiler having capacity 14TPH 7 working pressure 42 kg/cm2 7 steam temp 410 0c.
- Horizontal smoke tube ,package type stocker fired having capacity 6 TPH & max working pressure 10.5 kg/cm2.
- Horizontal smoke tube ,package type hand fired having capacity 3 TPH & max working pressure 10.5 kg/cm2.
- O & M of Demineralization water treatment plant having capacity 16 m3/hr.
- Have worked with M/S Aurangabad paper mills ltd, from July 1994 to June 1997 as a Asst. Engineer in mechanical dept.
Job Profile :- Operation & maintenance of the followings
- Coal fired ,water tube FBC Boiler having capacity 30 TPH & working pressure 42 kg/cm2, steam temp 420 degree centigrade.
- Coal fired ,water tube FBC Boiler having capacity 14.2 TPH & working pressure 11.2 kg/cm2.
- Coal fired water tube, pulsating grate bar having capacity 12.5 TPH & working pressure 11.2 kg/cm2.
- O & M of Demineralization water treatment plant having capacity 30 m3/hr.
- Operation of Impulse turbine with one controlled extraction & back pressure having capacity of 4 MW.
Salary : Gross 6.50 Lacs per annum + Free furnished accommodation

[Guest]

GOPAL RANPARIA
B.E. Instrumentation & Control

Objective
Seeking a challenging position in your esteemed organization so as to explore my self with true dedication and hard work and also to combine my innovative engineering skills with the knowledge of the practical field, to become a successful member of a creative Engineering team.
Professional Experience

- Company : NIRMA LIMITED, BHAVNAGAR (ISO 9001:2008 Company).
It is a company of Nirma Group in Technical Collaboration with AKZO NV of Netherlands to Manufacture 1800 TPD Soda Ash & 240 TPD caustic. It is also having its own Power plant of 63 MW capacities. power plant including 1* 200 TPH & 4*100 TPH CFBC Boiler
- Experience : 3.2years (Period: 10/07/2008 to till date)
- Designation : Instrumentation Engineer (Power Plant)
- Job profile : Working as a Instrumentation Engineer in Utility dept. having
63 MW Thermal power plant, RODM plant, Utility plant and
RMH plant
Technical Exposure

- DCS : Foxboro (America) I/A series 51 (ver 6.5.3) based on Sun Solaris & (ver 8.3) based on Windows XP.
- PLC : GE Fanuc (America) 90-30 series based on DOS & Windows O/S (Cimplicity based),siemens S7-400, GE Fanuc virsamax based on versa pro software
- Governor : Maintenance & Troubleshooting of Turbine Governor Control System from WOODWARD (Model: 505 & 505E with Micronet PLC).
- Energy Management System : Foxboro based on Windows NT.
- Calibration & Maintenance of following field Instruments :
- SMART Transmitters (Make - Moore, Yokogawa, Rosemount, Forbes Marshall, Elsag-Bailey)
- Motorized Valve (Make – AUMA), Control Valve (Make - Keystone, Fisher xomox, Copes-Vulcan, MIL controls)
- Analyzers : Gas Analyzer (O2, SO2 ,NOx analyzer – Rosemount / Yokogawa / Servomax), Liquid Analyzer (Conductivity & pH – Yokogawa / Bela / Rosemount)
- Bently Nevada Vibration Monitoring System : 1900 / 3300 / 3500 series
THERMAL(LIGNITE + COAL BASE) POWER PLANT
- Maintenance of 3 CFBC Boilers (100 TPH each) supplied by Lentjes Energy, Germany and 1 CFBC Boiler (100 TPH), 1 CFBC Boiler (200 TPH) supplied by IJT, Noida hooked up with DCS and PLC system.
- Maintenance of 2 x 16.34 MW Double Extraction, Condensing type STG sets supplied by TOYO DENKI, Japan & 1 x 6.5 MW back pressure type STG set supplied by BHEL, India & 1 x 23 MW STG Sets supplied by Greensol China.
- Maintenance of 5 x 135 m3/Hr Boiler feed water pumps (M/S Sulzer) and 4 Nos. of CO2 compressors supplied by GHH BORSIG, Germany.
Present Responsibility
- Performing the functions of troubleshooting and Breakdown / Preventive / shutdown maintenance jobs related to Boiler, Turbine, Air Compressor, and CO2 compressor, BFP, Dearator and Chiller. Also Leading the procurement & Inventory control activities of said systems.
- Successfully handle preparation of complete documentation as per requirement for
ISO 9001 : 2008 certifications.
- Responsible for design Automation & control systems involving configuration, modification, programming and Integrating & testing of PLC & DCS systems for better operation & safety protection.
- Fault Diagnosis, Operation pf control panel, Trouble shooting of Interlocking
Personal Information
Date of Birth 25TH june,1983
Marital Status single
Hobbies Travelling, Swimming, Reading books etc.
Language Known Gujarati English and Hindi
Academics
Year Degree Institution/School Specialization Percentage
2008 B.E.
A.I.T.S.-saurashtra university-rajkot Instrumentation & Control 62%
2005 Diploma a.v.p.t.i.-rajkot Instrumentation & control 69.5%
2002 H.S.C G.S.E.B, Gujarat Science 47%
2000 S.S.C G.S.E.B, Gujarat * 64%
Acadmic project
- SPEED CONTROL OF D.C.MOTOR USING 89C51 CONTROLLER. ( 7TH SEM )
- MICROCONTROLLER BASED WEIGHT MEASUREMENT & DISPLAY USING BELT
CONVEYOR(FINAL SEM)

[Guest]

BHUPESH PRALHAD MALKHEDE
E-mail :
bhupeshmalkhede52 AT gmail.com

Objective
To contribute significantly to highly challenging projects, work with an inspiring
team and grow in a reputed organization. Willing to work as a key player in
challenging and creative environment.
Academic Record
B.E. ( Electrical Engineering )
2010 RTM University, Nagpur 58.57% 12th
2005 Maharashtra state board 58.33% 10th
2003 Maharashtra state board 57.06%

Computer Proficiency
1.’C’ language only.

Work Experience
1. Worked in JBS Enterprises Pvt. Ltd. as a site Engineer in operation and maintaince of 220/66/11 KV sub station at Magarwada power house Daman.
Interests :
Power Plant
Software (testing)

References :
Will be furnished on
request Extracurricular Activities

1. Visited at KORADI Thermal Power Plant under training for 15 days in 2nd Year of Bachelor of Engg.
2. Oneweek training in BSNL RTTC, Nagpur on the subject of “Concept on Infrastructure & Utility Services for Telecom Industry”.
3. Participated in a “NATIONAL LEVEL PAPER PRESENTATION” competition in S.R.K.N.E.C & Anjuman College of Engg. & Tech.

Academic Projects
Title : Speed Control of Dc Motor using CHOPPER with Output Filter Design.
Principle of Operation : Chopper & Thyristor.
Description :
In this Project, we have done speed control by using single, two & four quadrant chopper by adding microcontroller as a interface between motor & chopper. Using this method, we found out various results in the form of Matlab Simulinks & practically also.

[Guest]

Which is the best training institute for PMP in Vashi navi mumbai...

[Guest]

Which is the best training institute for PMP in Vashi navi mumbai...mail me at j_panky AT yahoo.co.in