Gammon India Ltd Mumbai : PDMS Piping Design Engineer

[Admin]

Gammon India has diversified into Power Utility Equipments & EPC business and has also acquired manufacturing units for Power Utilities. The company is now looking for self motivated achiever, dedicated, innovative & dynamic engineers and other professionals for fulfilling its growth plans.

Current openings in power sector department

Post qualification (graduate engineering) work experience in one or more of the following areas:
* Design/specification/manufacturing, selection & purchase of rotating machinery /mechanical handling equipment such as Turbines/ Generators/motors/compressor/Pumps and various packages & system.(for positioning in the manufacturing work in Italy, For EPC and Projects Group)
* Design /manufacturing of material handling equipments, HVAC & other system (EPC & Projects)
* Knowledge of API codes, preparation of specification, data sheets, requisitioning, review of quotations, order specification and vendor drawing review
* Should have sound knowledge of Plot Plan development, Equipment & piping layout & design. Knowledge of piping design codes, standards, statutory rules and experience in preparation of piping material specifications, material take-off, data sheets and requisitioning in essential. Having experience of PDMS would be preferable.
* Experience in fire fighting system, U/G piping, stress analysis and projects with 3-D modeling & design
* Knowledge of piping layout & design concepts. Should have worked on pipe stress analysis & have thorough knowledge of relevant codes. Should have worked on complex systems-including multi-phase flow innovating air coolers, heaters, reactors and large pumps. Should have good knowledge of supporting nozzle flexibilities, expansion bellows etc. Knowledge of computer packages used in layout including walk through is expected. (Above Mainly For EPC & projects but could be deputed to manufacturing plants also)
* Experience in the design and fabrication of equipment like boilers-high pressure vessels, tanks, heat exchangers, columns etc Should have experience in preparation of enquiry specification,review of quotes & preparation of Technical Requirement,order specifications and review of vendor drawings. (For Boiler manufacturing facilities in South India/Italy)

How to apply
Kindly, email us your resume with the subject line mentioning the position that you are applying for at resume@gammonindia.com. We will contact you at the earliest.

http://www.gammonindia.com

Gammon India Limited
Veer Savarkar Marg,
Prabhadevi,
Mumbai 400025
India
Tel: +91-22-67444000
Fax: +91-22-2430 0221

[Guest]

Dear Sir/Madam,
with respect we are sending our recent cv regarding our telephonic discuss/introducing by net search for subjected offer.
Please find attached doc.and take a necessary action.

KINDLY FORWARDME THE INTERVEIW SCHEDULE BY MAIL IF MY JOB PROFILE IS MATCHING YOUR REQUIREMENTS.

Awaiting for your early positive reply.

Thanks & Regards,

SALEEM JILANI

[Guest]

CURRICULUM VITAE

NARESH KUMAR
Email – n.piping AT ymail.com
Educational Qualification Board/University Year Passing
Matriculation B.S.E.H. (HARYANA) April-1999
Senior Secondary (Science Stream) B.S.E.H. (HARYANA) April- 2003
Diploma In Draughtsman Mechanical
Board Of Technical Education Chandigarh. (Haryana) July- 2007
Diploma In Mechanical Engineering
J.R.N.Rajasthan Vidyapeeth University (Rajasthan) July- 2009
Career Summary :-
3Years experience in designing & drafting of piping Drawings for OIL & GAS, Refinery, and Petrochemical
Plants and doing AutoCAD Drafting & PDMS Modeling.
Software Knowledge :-
Diploma course in Auto-CAD Release-14, and Auto CAD 2000 Windows 95, MS Office 97 (MS Word, MS Excel, etc) and other utility programs And PDMS, design in 11.5,11.6 PDMS Version.
PDMS Modules
- Design.
(a) Equipment Modeling.
(b) Piping Modeling.
(c) Design.
- Draft.
(a) Dimensioning.
(b) Labeling.
(c) Tagging.
- Isodraft.
(a) Isobatch file Extraction.
Professional Experience
- Comp. Name Triune Projects Pvt. Ltd. New Delhi
Triune Projects is an ISO-9001 Company engaged in Hydrocarbon sector viz. Oil & Gas (Onshore and Offshore) Platforms, Refineries, and Chemical & Petrochemical Plants.
- Position PDMS, Piping Designer.
- Work duration 1st July 2008. To 12 October 2010.
Professional Experience
- Comp. Name OSM Engineering Conveying Pvt. Ltd. Faridabad
OSM Engineering is an ISO-9001 :2000 Company engaged in Pneumatic Ash Handling Plants, Milk Filter plant, Paper mills & Cement plant, Miner Chemical Plants, Food processing plant, Water treatment plant, Power plant,fertilizer plant.
- Position PDMS, Piping Designer.
- Work duration 28 October 2010 TO till date.
Job Responsibilities.
- Equipment modeling according to equipment data sheet.
- Piping modeling as per P&ID, GAD, & Equipment layout.
- Pipe routing without fouling to any structure.
- Checking of pipe Clashes in PDMS.
- Data consistency checking of pipe routing.
- Generation of Reports in PDMS.
- Support incorporation as per stress analysis report.
- Nozzle orientation According to M.D.S.
Piping Technical knowledge.
- Pipe size calculation.
- Pipe Thickness calculation
- Spool size calculation.
- Knowledge of ASME Codes and Standard.
Personal Details

[Guest]

CURRICULUM VITAE

Name : BITTU KR. GUPTA
Department : Mechanical Engineering
Objective : To be the front runner and do prefect things in short period of time in my field of work.
Summary : I have completed B.Tech in Mechanical Engineering with CGPA 7.30 .

Academic Information
Performance in 10th & +2 level
No. Course Board / University Year of passing % / Grade
1 10th C.B.S.E. 2005 74.6%
2 12th C.B.S.E. 2007 69.8%
Performance in Under Graduate Level (B. Tech .)
Sem. I Sem. II Sem. III Sem. IV Sem. V Sem. VI Sem. VII Sem.VII
GPA CGPA GPA CGPA GPA CGPA GPA CGPA GPA CGPA GPA CGPA GPA CGPA GPA CGPA
6.19 6.19 6.62 6.42 8.15 7.01 6.91 6.98 7.41 7.07 7.61 7.16 7.70 7.25 8.0 7.30
Projects / Internship undertaken
No. Project Organization Duration Details
1. Mini Project :
i)Supplier Selection using Analytical Hierarchy Process, Quality Functional Deployment and Linear Programming.
ii)Supplier Selection using AHD, QFD and
Selection Index.
under the guidance of Mr. Amitava Ray, Associate Prof., Mechanical Engineering Dept., SMIT 8 weeks i)Integrating AHP, QFD and LP
Processes to select the distinguishable supplier.
ii)Integrating AHP,
QFD and Selection Index to select the distinguishable supplier.
2. Major Project : Design Development Suspension System of an ATV for Disaster Management. Under the supervision and guidance of Mr. Amarendra Kr. Das,
Prof. and Head,
Dept. Of Design ,
IIT, Guwahati
4 months To design new Suspension System for an ATV using AutoCAD.
Special Trainings (if any)
No. Organization/ Institute Type of training Duration Certification
1. NHPC Ltd., Stage-V, Balutar ,
Singtam Industrial training 4 weeks YES
Computer Skills
No. Languages / packages Good Average Poor
1 C YES
2 CADIAN YES
3 CAD/CAM YES
4 AUTOCAD YES
Extra-curricular activities
- Participated in various quiz events during school level.
- Participated in various sports events (Badminton, Cricket) during school level.
- Member and coordinator of various committees of Refulgence “10.
- Sub coordinator of the Annual College Festival, KAALRAV “10 .
- Played for Departmental Cricket Team of Mechanical Dept. in 2010.
Hobbies
- Reading books.
- Watching TV.
- Playing cricket.
- Drawing.
Additional Informations
Project Papers Published/Selected :
- Project paper selected for presentation in International Conference on Management
Sciences 11(ICOMS11) organized by Institute of Management Technology (IMT), Nagpur.
- Project paper selected for presentation in Supplier Chain Management 11 (SCM11) organized by Indian Institute of Management Technology, Bangalore(IIMB).