Instrumentation, Piping, Electrical, Static, Rotating equipment design job

[Admin]

HI,
updated resume if interested.

• Position for Jr. Sr. profile
• Salary negotiable open for Right Candidates

Experience 3 -15 YEARS OF EXPERIENCE
Please provide few references if available for following Position

Piping Engineer
Piping Engineer/Senior Engineers/Lead Engineers - No. 15
Designer/Senior Designer - No. 10

Electrical
Senior Engineers/Lead Engineers – 18
PDS Designer – No -12

Instrumentation
Lead Engineers No.-14
Senior Designer No. - 6

Mechanical
Rotating Engineers No-8
Static Engineer – No-10
Package Engineers - No-6

Chemical
Process Engineer - 20

For Quick Response mail or contact

Contact person: Nikhil Kumar

email id 1source.hr@gmail.com

phone no :+ 91 - 9811501453 [India 9:30 AM to 10:00 PM]

[Admin]

WE HAVE OPENING WITH KOREAN MNC IN EPC OIL & GAS SECTOR.
For all above positions, candidates must have relevant experience in the oil and gas field.
Mechanical
Rotating Engineers - More than 10 year of relevant experience . No-2
Static Engineer – More than 8 years of relevant experience. No-4

Piping
Engineer/Senior Engineers/Lead Engineers – Candidate should have more than 10 years of experience – No. 5
Designer/Senior Designer - Candidate should have more than 10 years of experience. – No. 8
Electrical
Senior Engineers/Lead Engineers – Candidate having experience of 10-15 years - No. -2
PDS Designer – Experience ranging from 4 to 8 years. – No -2
Instrumentation
Lead Engineers – More than 10 year of experience in oil and gas sector . No.-4
Senior Designer – More than 15 years of relevant experience. – No. - 2



Civil

Engineer/Senior Engineers/Lead Engineers – candidate should have more than 10 year of experience in civil and structure. Experience in modular structure and B.S. code will be preferred. - No.- 3
Engineer – Having minimum 5 year of experience in General Civil work - No. 2

*Please note that we are also looking for consultants (Retired civil engineers) for civil department

PHONE 91- 9811501453
EMAIL 1source.hr@gmail. com

[Guest]

Gensen Mathew George

Profile - A challenging determined graduate (BE) in Electronics and Instrumentation Engineering with good communication skills and ready to work both independently and as a member of a team, utilizing the skills acquired during my course.
Career Objective - A career in Electronics and Instrumentation engineer position, that provides opportunities for personal and professional development as well as to contribute to the organizations effectiveness in order to take the company to the top position where ever I work
Qualification : Bachelor of Engineering (B.E)
Specialization : Electronics and Instrumentation Engineering.
Computer Skills : Windows 98\2000, Visual Basic,MS Office, Excel, PPT
Other certified packages : Automation Engineer from Technocrat Automation

Project done in Embsys Technology
AMBITION :
To successfully lead a team of people towards achieving the organization goals with best utilization of the given resources
Soft Skills :
- Good Knowledge in 5 PLC’s i)Siemens ii)Delta iii)Ge Fanuc iv) LG
v) ASEA Brown and Boveri
and 2 SCADA i) FIX 32 ii) Wonderware Intouch
- Strong oral and written communication skills.
- Good listening power, excellent analytical and problem solving skills. Strong players individually if tasks are allocated

Academic Qualifications :
Degree / Qualification Year
BE (E&I) [Sathyabama University, Chennai.] 2009
Advance Diploma in Process Control Instrumentation & Industrial Automation [SIIT,Thalayolaparambu]
Plus Two [Marthoma Senior Secondary School,Kozhencherry] 2005
10th [Marthoma Senior Secondary School,Kozhencherry] 2003
Certified Automation Engineer [Technocrat Automation] 2010
Extra curricular activities :
- Team member for the athletics team of the school.
- Presented seminars on various Instrumentation subject related topics

[Guest]

CURRICULUM VITAE
Of
Mohamed Ibrahim Elabbas
OBJECTIVE
I am willing to give total support the organization that I will be in, the 12 years experience in Instrumentation field and capability that I have, in order to achieve organization’s goals and create mutual benefits.
Email : mohamed.ibrahim AT wnpoc.com.sd
GRADUATION
1.Bachelor degree of engineering in electronic engineering (Communication) honor(second class) Sudan University of Science and Technology (2002-2004)
2.Electronic Engineering Diploma Sudan University of Science and Technology (1993-1995)
3.Two years vocational training (instrumentation measurement and control) Greater Nile Petroleum Operating Company institute. (1999-2001)
SUMMARY OF Experiences
About twelve (12) years of experience in Instrumentation and Control System field
Main duties and responsibilities are
- Reviewed project proposals, design drawings, equipment specifications and ensure compliance with international applicable codes, standards and specifications.
- Preparation of the detail design packages for new plant or modification and upgrades design for existing facilities.
- Witness, monitor and/or inspect the installation and testing of instrumentation and controls and ensure installation and start-up of control and instrumentation systems as per scope of work.
- Inspection of field installation and location of instrumentation and control panels, PLCs and SCADA systems.
- Assure compliance with specifications, drawings and approved submittals.
- Provide recommendation on all instrumentation and control construction work to assure a functionality and final product.
- Verify equipment settings, alignment, and testing and instrumentation calibration tests.
- Monitor contractors' compliance with approved contractor quality control program and submittals.
- Give recommendations for improvements to standard construction quality control provisions.
- Work with vendor technical representatives to resolve equipment technical problems.
- Leads and recommends new continuous improvement solutions for installations or modifications to improve the newly designed facilities and standardization.
- Support project execution and project proposals, initiate detailed work outline, and make decision as to basic processes, and/or equipment.
- Aware of Hazardous area Classification.
- Preparation of Instrument Specifications for Flow, Level, Pressure and Temperature Instruments.
- Sizing of Control valves, Pressure relief valves and Orifice plates, Venturi, Ultrasonic, and Vortex Flow meters.
- familiar with relevant international standards related to instrumentation control and safety system like API, ISA, ANSI/ASME, IEC etc.
WORK EXPERIENCE
2005-2011 Instrumentation and Electrical Engineer (senior position)
White Nile Petroleum Operating Company (WNPOC)
Lead supervision of the installation and commissioning of Fire alarm system for TharJath an Mala camps
Lead supervision of the rectification of the FWKO interface level Transmitter
Supervised/Lead the bidding stage of the Batching Feasibility study
Supervised E/I work activity in WNPOC Batching Feasibility study
Prepare/Review the instrumentation Guidelines/Procedures/Equipment specification
Lead the engineering phase of Mala Satellite project
Complete the installation and commissioning of the DCs (monitoring system) of Mala Satellite project
Lead TJ/Mala/Jokyan/Thoun filed basic
Engineering package
Prepare material requisition, issue tender package Expedite vendor quotation receipt, receiving bids. Analyze, evaluate and study the bids.
Hold Technical pre-award meeting with the successful suppliers.
Supervised basic and detail engineering design with regard to electrical and instrument which include preparation of Instruments equipment specification.
Review and give recommendation on contractors’ design, procedures and drawings related to electrical/ instrument discipline to ensure compliance with project specifications.

Manage and expedite work related to electrical/ instrument discipline to ensure compliance with project schedule.
Manage contractor to undertake the project in compliance with all HSE and international safety standards and regulations.
Team member of Hazop study, project Risk Assessments and projects integrity review.
Attended equipments tests such as Factory and Site accepted test, Pre-commissioning, commissioning and start-up.
1999-2005 Instrumentation Technician (Senior position)
Greater Nile Petroleum Operating Company (GNPOC)
Six (6) years experience in field Instrumentation and control of Oil & Gas. Job includes corrective and preventive Maintenance, Commissioning, Modification of instrument devices and equipments, control loops, logics as per requirements of production.
Carried out Calibration work for all instrument measurement sensors
Carried out all type of rectification work for instrumentation equipments and devices this includes calibration work for pressure, temperature, flow and level measurement in the field processing facility and central processing. Facility (FPF,CPF).
Familiar with all type of instrumentation calibration equipments (Digital Millimeter, Hart Communicator, pressure and temperature calibrator
etc….)
Training/Courses
Institute course title date
Meirc Training & Consulting
Successful Business writing 01 Jan 2008
Haward technology Advance Valve Technology (Design, Selection, Installation, Sizing, Inspection, Maintenance & Troubleshooting)
19 Dec 2010
The McCleland
Institute Managing Motivation for Performance Improvement
06 Dec 2010
International Center
for Quality
Advance Supervisory Skills 26 Sep 2010
ITOL(Institute of raining & Occupational learning) Technical Report writing 10 May 2010
International Center for Quality Problem Solving & Decision Making 27 Jul 2009
Aztech Safety Instrumentation and Emergency Shutdown Systems 26 Jul 2009
Meirc Training & Consulting Negotation Skills 10 Nov 2008
Egyption Training Consultation & Management Center Advanve Programmable Logic Control -PLC 12 Oct 2008
Petroleum India International Performance Management System 03 Nov 2007
Instep Project management 15 Jun 2006
GLOMACS Advance Process Instrumentation (Process Control & Loop tuning) 20 Nov 2004
Tri star middle east Programmable Logic Controllers(PLC) 26 Sep 2004
Glomacse filed instrument and control valve 28 Jun 2004
metso automation Scada System 14 Nov 2002