Damodar Valley Corporation Recruitment 2010 : DVC Junior Engineer, Mechanical Electrical

[Admin]

Damodar Valley Corporation, one of the premier power utilities in India engaged in Thermal / Hydel power generation, Transmission & Distribution with its Head Quarters in Kolkata invites applications for the posts of Junior Engineer GR.-II(Mech./Elec./C&I) from Indian citizens only for its various power projects / offices spread over across the state of West Bengal and Jharkhand. To fill up the following posts, DVC is looking for young and promising DIPLOMA ENGINEERs having good academic record to join the organization as:
JUNIOR ENGINEER GR.-II(Mech./Elec./C&I)–Total Vacancy:298

Upper Age Limit : Not exceeding 28 years

Application Fee: General as well as OBC(Non Creamy) category candidates are required to pay a non-refundable Demand Draft of Rs.200/-(Rupees two hundred) only as Application Fee in favour of “The Chief Accounts Officer, DVC, Kolkata” payable at Kolkata on any nationalized Bank with validity of 6(six) months


Compensation Package:
Selected candidates will be placed in the pay scale of Rs.9300-34,800/-(Pay Band-2) with Grade Pay of Rs.4200/-.


Service Agreement Bond:
All the candidates selected for appointment will be required to execute a service agreement bond of Rs. 1,00,000/- (Rupees One Lakh) for serving at least 2(two) years in DVC to be submitted in the prescribed format at the time of joining.



ELECTION PROCESS:
Eligible candidates will have to undergo a Selection Test followed by Personal Interview of short listed candidates. Based on merit and requirement, the list of successful candidates to be called for interview will be made available at http://www.dvc.gov.in. The candidates will have to qualify at each stage and final selection shall be as per above vacancies.
However, appointment of selected candidate is subject to his/her being found medically fit as per the Corporation norms


TEST CENTERS:
The selection test will be held in Kolkata and Ranchi as mentioned in the online application system. Candidates have to choose one of the centers as Test Center and no change in any circumstance will be considered subsequently. However, DVC reserves the right to cancel or add any center depending on the response of the candidates for that area / center. Admission to the test center will be on production of Admit Card, which is to be downloaded by the candidates from DVC website.
ABOUT TEST:
The questions in the test will consist of multiple-choice questions of the relevant technical disciplines and on Aptitude/GK/Current Affairs.
HOW TO APPLY:
Mode Of Application : Candidate should apply through DVC’s Online Registration system only. The Online Registration will be available on the website www.dvc.gov.in and will remain activated from 00-00 hrs of 26.12.2009 to 24-00 hrs of 15.01.2010 . No other mode of application will be accepted.

The above documents should be sealed in an envelope superscribed as i) Junior Engineer Gr.-II - (MECHANICAL/ ELECTRICAL/ Control & Instrumentation) ii) GEN/ OBC/ SC/ ST/ PH & iii) Registration number and the sealed envelope should be sent by ORDINARY POST to the following address:

The Advertiser (DVC),
Post Box No.9248,
Krishna Nagar Head Post Office,
Delhi -110 051.

Closing Date : The closing date of receipt of Registration slip is 22.01.2010.
Validity of Online Registration is subject to receipt of Registration slip along with relevant enclosures within the closing date and further scrutiny regarding eligibility of the candidate.

http://applicationnew.com/dvcje/

Full details of advt:
http://applicationnew.com/dvcje/aDVT.htm
Steps to apply :
http://applicationnew.com/dvcje/FLOWCHART.htm
Apply online:
http://applicationnew.com/dvcje/apply.htm
Reprint:
http://applicationnew.com/dvcje/reglogin.asp

Important :
Online Application
Start date : 26.12.2009 00.00 hrs.,
Closing Date : 15.01.2010 24.00 hrs.,
Last Date for receipt of Documents : 22.01.2010

[skdas_y2k09@yahoo.in]

shortlisted candidates for interview for diploma electrical & mechanical engineering (junior engineer)

[Guest-IJT]

The submitted value of field named "Name :" is:
Supraja Ambati
-------------------------------------------------------
The submitted value of field named "Email :" is:
supraja.a80 AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
Assistant Design Engineer
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
SUPRAJA AMBATI

Email : supraja.a80gmail.com

OBJECTIVE
Seeking a position to utilize my skills and abilities in an organization that offers professional growth while being resourceful, innovative and flexible.
SYNOPSIS
B. Tech (Mechanical) professional with around 1 year of experience and sound knowledge in CATIA V5, AutoCAD, Pro-E, PLM Software : ENOVIA; familiar with engineering aspects, designing parts in CATIA V5, and experience in Electrical Wire Harness; deep understanding of Mechanical Engineering domain with focus on delivering business solutions; Persuasive communicator with exceptional relationship management skills with the ability to relate to people at any level of business and management.
- Good at handling Project skills
- Adroit at learning new concepts quickly, working well under pressure and communicating ideas clearly and effectively
- Dedicated and highly ambitious to achieve personal as well as organizational goals
EDUCATION
B. Tech specializing in Mechanical from Bapatla Engineering College in 2010 with 68.5%
XII from Sri Chaitanya Junior College in 2006 with 88.4%
X from St Pauls High School in 2004 with 82%
SKILLS
Language : C
Operating System : MS-Dos, Windows XP
Designing Tools : CATIA V5 R19, AUTO CAD, PRO-E
PLM Software : ENOVIA
WORK EXPERIENCE
INFOTECH ENTERPRISES LIMITED, HYDERABAD
Assistant Design Engineer
Responsibilities :
- Managing production
- Responsible for quality checking
- Involved in knowledge sharing
- Helping in finding automations
- Managing time management
Projects Handled :
#1 :
Client : Boeing Commercial Airplanes
Location : USA
Duration : 9 Months
Team size : 20
Environment : Windows XP, UNIX, CATIA V5, ENOVIA LCA
Description : Project involved the following objectives:
Study of Inputs Boeing Design Manuals (BDM), Boeing Conversion manuals (BCM), CatiaV4 Datasets
Conversion of models using E3d migration interface
Replacing all mechanical supports and electrical connectors from Boeing electrical library in Enovia
Remaster the bundles to route them through the connectors and supports
Restructure and rename the product as per Boeing standards
Quality check comparing input v4 and output v5 using catiav5
Upload to Enovia Lca and filling the attributes
Role : Team Member
ACADEMIC PROJECT
Organization : BEC- Bapatla
Project Name : Dual Excavator (Robotics)
Project Goal : The main goal of this project is to increase the work area by providing two working arms providing rotational along with translational with support of guide ways to the conventional excavator.
Description : We prepared a prototype with simple specifications as given below. With that prototype we have drawn a graph for the movement and work done by the dual excavator.
Specifications of prototype :
Transformer : 6volts
Motor type : stepper
Base motors, motors for linear motion : 200rpm, 300rpm
Motor for slew, motor for bucket lifting : 300rpm
Extension arm : 22X1.7 cm
Guide ways : 32.5X1 cm
Bucket dimensions : 11.6X6.6 cm
Base wheels : 6.5 cm dia
Weight : 4.3 kg
We achieved our goal i.e., increase in working area with implies decrease in working time by providing two arms on the same base with our simple prototype.
TRAINING AND SEMINAR
- Undergone training in InfoTech, catia v5 and plm software (Enovia)
- Undergone AutoCAD training
- Involved in seminar about quality management in InfoTech
ACADEMIC ACHIEVEMENTS
- Received a pass certificate from the Andhra Pradesh Public Library Association for All India General Knowledge Test
- Received an appreciation certificate for the state level talent test held by vishwabharathy foundation from the “Sir C.V.Raman Council of Education Awards”
- Various talent tests at the school level
EXTRA/CO CURRICULAR ACTIVITIES
- Participated in Sanketha-09 at CUSAT, a national level event on paper presentation
- Participated in Adsophos - 09, a national level event on paper presentation
- Participated in Safire-2k8 and Aadhritha-08 national level evens
STRENGTHS
- Possess good relationship building and interpersonal skills
- Hardworking and quick learner
- Commitment towards work
- Sincerity and Self-Confidence
- Good team player
- Quick adaptability to challenging situations

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4125804
Date & Time : 13th May 2011 7:39 AM (UTC)
IP Address : 202.153.41.35
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country : India

[Guest]

SANDIPAN MONDAL
Email : sandipan247 AT gmail.com

PROFESSINAL SUMMARY
Seeking a position to utilize my skills and abilities in the Electrical Core industry that offers professional growth while being resourceful, innovative and flexible.

ACADEMICS
Graduated in 2009
- B.Tech (Electrical Engineering) 2005-2009
Passed with 78.95% from Aryabhatta Institute of Engineering and Management Durgapur, West Bengal
- Higher Secondary Examination (W.B.C.H.S.E.) 2005
Passed Higher Secondary with 60% from R.V.H.S(Rajpur).
- Secondary Examination (W.B.B.S.E.) 2003
Passed Seconday examination 73.7% from R.V.H.S(Rajpur).

SKILLS
- Computer Knowledge :- Ms Access,Internet Access,HTML.
- Electrical Knowledge :- Electrical Network,Circuit Theory,Electrical Machine.

Experience
- Worked as a supervisor in a electrical LT panel manufacturing company(6months)
Duration :-18th Jan To 25th June
Company Name :- Electro Allied Products Ltd.
Job Description :- According to circuit diagram I have to check all the materials used in LT panel board,then the LT panel board assembled by electricians,finally electrical testing done by me.

TRAINING AND PROJECT
DPL, Durgapur, West Bengal
Summer training (2008) at DPL, Durgapur
Topic- Switch yard,Power House.

Hobbies AND ACHIEVEMENTS
- Listening to Music,Playing and watching Cricket,Computer Games,Writing Poetry.
- Took active participation in interschool annual sports competition and won several prizes.