Resume / CV : B.Tech, Electrical Design Engineer

[imranfiras@gmail.com]

CURRICULUM VITAE
Syed Mubasheer Ahmed
E-mail: imranfiras AT yahoo.co.in,imranfiras AT gmail.com

Career Objective:
Seeking for a challenging position in a professional organization in the field of as an ELECTRICAL DESIGN ENGINEER andutilize my professional qualification.


Educational Qualifications:
Electrical & Electronic Engineering(B.Tech) from Jawaharlal Nehru Technology University, Hyderabad, AP, India. (66.31%, 2009).

PROFESSIONAL EXPERIENCE:
Organization :M/s. SUNDARAM ARCHITECTS PVT. LTD.,
Hyderabad.
Present Designation : Asst. ELECTRICAL DESIGN ENGINEER
Period: May ’2009 to till-date (Full Time) April 2008 to May 2009 (As part timer).
Responsibilities :
v Designing of the electrical services.
vInvolved in preparing the layouts of lighting, power, telecommunication, public address system, fire alarm and security.
vDrawing single line diagrams.
v Preparing BOQ.
v Involved in cost estimation of the item.
Software used : AutoCAD R –14, 2000 & 2002, 2005 & 2006, MS-Office.
NATURE OF JOB:
·Preparing calculation sheets for lighting, cable tray and cable calculations for various buildings to execute the project according to client requirement.
·Producing Designing and Execution drawings as above-mentioned various services for Electrical by using calculation and client input data sheet/tender drawing.
·Preparing Electrical schematic drawings.
·Analyzing the problems that arise during the production and getting the solutions from the client.
·Co-ordination among production team, as well as other trades.
·Preparation of Bill of Quantity (BOQ).

PROJECT DESCRIPTION:
·All distribution/switch boards are connected to LVGB or main panel. Short circuit current, voltage drop and related notes are shown on main panel board.
·All type of loads collected from concern department like lighting, socket, HVAC, kitchen, and plumbing. According to load, main switch, circuit breakers, calculation notes are decided, for distribution panel.

Earthing Layout: In IEC Standard we are following some calculation cable material (copper), thickness (50mm²), distance from the building (1 mtr), distance between grounding and crow’s foot to crow’s foot (20 mtrs). Each building shall be surrounded by a non-insulated copper cable of 50mm², laid at the bottom of a trench. The resistance of each circuit shall be maximum one Ohm. Final end of conductor is connected to the bus bar of panel board.
·According to lighting load calculation sheet, we decided location of each type of lighting fixtures and its controlling points in each room. All circuit numbers are decided for lighting, socket, power layout, and other trade loads are shown on drawing. All loads considered to design distribution panel and general panel. According to conduit installation all fixtures carried to this service.

·Cable tray: We follow cable length, width from the standard table, details of different cable supporting, taken care for bending angles. Standard software used to find out cable tray width according to number of circuit or homerun to create this service. This layout data consists cable tray width, Invert level, type materiel. Ex. Type of cable trays CT, CTG, and CTGC (sizes CT1=123, CT2=220, CT3=316 CT4=436 and CT5=508mm), we developed execution drawings according to calculation sheets.
·Electronic & Electrical – 2 dimensional drawing of Distribution Transformers up to 500 KVA, Generator, sub - Station Panel board drawing & schematic diagram.

·Conduit Installation: In IEC Standard provides routing of conduit to pass cable to connect different fixtures for all floors, it may be concealed or surface mounted. We are normally considered routing of conduit embedded in the floor and wall. Also showing location of sockets, switches, and power devices, and earthing connections according technically.
·Lightning protection: Buildings shall be protected against lightning in accordance with Standards. This service is using for safety purpose against lightning. We are creating this system using by simple calculation, like mesh connection, bonding to each equipment (HVACs, plumbing) to protect. Flat copper bare conductor (30x2mm size) is used around on the parapet. The down conductor is connected to crow’s foot according to earthing system.

·Divisional (TD) and General Panel Board (LVGB): All type of loads is collected from concern department like lighting, socket, HVAC, kitchen, and plumbing. According to load, main switch, circuit breakers, calculation notes are decided. All distribution/switch boards are connected to LVGB or main panel. Short circuit current, voltage drop and related notes are shown on main panel board.

PROJECT WORKED IN SUNDARAM ARCHITECT:
ØGARUDA MALL, Hyderabad.
ØSoftware Development Centre, Satyam Hyderabad.

STRENGTHS:
vExcellent communication skills and a good team player.
vAbility to complete the work within the stipulated time.
vAbility to work under tremendous pressure.

TECHNICAL EDUCATION:
Electrical MEP designing from Taiba Institute, Hyd, A.P, India.
Project management with Primavera software from Advance Training institute, Hyd.A.P, India.
Diploma in circuit analysis from Wineyard Technologies.
SCADA from Advance Training institute, Hyd.A.P, India.

Computer skills
·Operating System like windows 98 to XP (professional).
·Auto Cad 2004, 2005 & 2006.
·Ms. Office.
·Hardware Basic, Software Installations.
·Lower Grade Type Writing (English).

Achievements:
èAwarded as meritorious student in third year of engineering.
èCertificate ‘A’ in National Cadet Crop Regiment Third Andhra Battalion.
àConducted by Authority of Ministry of Defense, Government of India.
èCertificate of attending national cadet crop (NCC) camp.
èCertificate in mood management program.
èCertificate of Participation in “Students Professional Awareness Conference (SPAC ’08)”
àConducted by IEEE Branch of Muffakham Jah College of Engineering and Technology.
èCertificate of Participation in a National level Technical Symposium (YUKTI 08)
àConducted by IEEE and ISTE Branch of Mahatma Gandhi College of Engineering and Technology.
èCertificate of Participation in a National Level Technical Symposium (TechnoSPRIT‘08’)
àConducted by Shadan College of Engineering and Technology.

Lingual Efficiency:
1English : Good (Reading, Writing & Speaking)
2Hindi : Good (Reading, Writing & Speaking)
3Urdu : Good (Reading ,Writing & Speaking)
4Telugu : Good (Reading ,Writing )
5Arabic : Good (Reading ,Writing )

Personal Details:
Date of Birth : 08-12-1987
Gender : Male
Marital Status : Single

Declaration:
I under signed, certify that to the best of my knowledge and belief, these data correctly describes my qualification, my experience and me. Further, I certify that given an opportunity, I would work to best of my abilities and your satisfaction.

Place: Hyderabad
Date:
(SYED MUBASHEER AHMED)

[Guest]

CURRICULUM VITAE :
Md Mukram Iqbal
Email : mmivits232 AT gmail.com .

Career Objective :
To pursue a challenging career in the organization as an ELECTRICAL DESIGN ENGINEER, where I can apply my technical and analytical skills and contribute for the growth of organization.

Academic Details :
- Pursued B.tech In the year 2010 with stream as Electrical and Electronics Engineering aggregating with 72.17% from Vivekananda Institute of Technology and Science.(J.N.T.U.)
- Pursued Intermediate with 89.5% from Board Of Intermediate.
- Pursued SSC with 85% from Board Of Secondary.

Work Experience :
- Worked as a Trainee Engineer in Anusha Electricals from Jan 2010 to June 2010.
- Worked as an executive engineer & field supervisor in Anusha Electricals from June 2010 to July 2011.

Assets :
- Good Communication and Interpersonal Skills.
- Quick Grasping and Learning Capability.
- Confident and efficient in Undertaking and Executing Assignments.
- Skill to motivate self and others.

Technical Skills :
- Diploma in Electronics & Hardware Engineering, From Ministry of Small Scale Industries, Small Industries Service Institute, Government of INDIA, Karimnagar, A.P. INDIA.
- Completed Diploma in AutoCAD and ECAD from Cad World Institute.
- Completed a Diploma course on Electrical Designing and Fire Fighting from Taiba Engineering Consultants.

Duties & responsibilities :
- Can prepare SLD’s for the equipments installed.
- Detail design Engineering of Building Electrical system.
- Design of Power System Layout including Load Calculations.
- Lux level calculations : Manually as well as using CG Lux software.
- Voltage Drop Calculations, Cable Selection, & Transformer Selection.
- Design of Fire Alarm, Detection System & Communication System.
- Design of Commercial Interior Lighting/Emergency Lighting/Landscape Lighting.
- Responsible for Preparation of Bill of Quantity of Materials for Projects.

Areas of Interest :
Power systems, Electrical machines, Electrical Designing.

Lingual Efficiency :
1 English : Good (Reading, Writing & Speaking)
2 Hindi : Good (Reading, Writing & Speaking)
3 Urdu : Intermediate (Reading ,Writing & Speaking)
4 Telugu : Good (Reading ,Writing & Speaking)

Project Details :
Title (MAJOR PROJECT) : POWER UPGRADING OF AC TRANSMISSION LINE USING AC-DC TRANSMISSION.
Technology : MATLAB

Title (MINI PROJECT) : PASSWORD BASED SECURITY SYSTEM.
Technology : Embedded Systems
Worked as a batch leader for both major and mini projects

[Guest]

hai dear,
i am senthil.BE at chennai