CV / Resume : Aircraft Maintenance Engineer

[pushu]

Dear Sir/Madam,

Iam working as Aircraft Maintenance Tech in Jet Airways Pvt ltd., having approximate 4 & 1/2 years of Exp in the Aviation field.I have cleared Indian DGCA Basic Aircraft maintenance Engineer's Licence on Airframe (HeavyAeroplane).Worked in Line & Base stations.Worked on Boeing 737-400,700,800.ATR72-500,CFM56-7 Turbo fan engines.,P&W 127 Engines.,Airbus330-200..Hopefully, to get a job in your company, iam forwarding my C.V along with this mail.Kindly consider my C.V for the post i am eligible.

thanking you.

yours faithfully,
p.bangera

CURRICULUM VITAE
Mr.PUSHPAKAR BANGERA
Mangalore-575002
Email id : sunny15484 AT yahoo.co.in,pushu84 AT rediffmail.com

OBJECTIVE :
Ability to work with full-fledged innovative ideas in a challenging atmosphere & striving hard to attain success in this competitive world.

EDUCATIONAL SUMMARY :
Qualification University/Institution Percentage :
S.S.L.C St.Aloysius High School,Kodialbial,Mangalore-3 79.68%
P.U.C St.Aloysius Pre-university College,Kodialbial,Mangalore-3 Overall-77.66% PCM-87%
A.M.E (Airframe & Engine) Hindustan Institute of Engineering Technology,Guindy,Chennai-16 82%

ADDITIONAL TECHNICAL QUALIFICATION :
Qualification Board of Examination Percentage :
PAPER-1(Civil Aviation Requirements) DGCA, New Delhi. PASSED (70%)

PAPER -2(General Engg & Aircraft Maint.practices) DGCA, New Delhi. PASSED (70%)

BAMEC-HA (HEAVY AEROPLANE) DGCA, New Delhi. ICAO TYPE II (CAT “A”) PASSED (79%)

WORK EXPERIENCE :
(A) Working in JET AIRWAYS (I) Pvt Ltd, Line Maintenance Engineering Department, as an Aircraft Maintenance Tech.from 11th July 2006 to till date. My Area of Work involves all types of inspection involved in Transit & lay over inspection of Boeing737- 400,700,800 & ATR-72-500.Currently working in JET AIRWAYS (I) Pvt Ltd, Line Maint. Dept, Mangalore International Airport, Bajpe, Mangalore.

(B) Worked in ALH-Final Assembly, Hindustan Aeronautics Ltd, Helicopter Division As a Quality Assurance Engineer on Contract basis from January’2006 to 5th july2006. My area of work is Quality Assurance Inspection Department, Final assembly Production & Field service of Advance Light Helicopter (ALH-DHRUV).

(C) Worked in ALH-Final Assembly, Hindustan Aeronautics Ltd, Helicopter Division As a Trainee Engineer from May’2005 to December’2005.My area of work is Quality Assurance Inspection Department, Final Assembly, Production & Field service of Advance Light Helicopter (ALH-DHRUV).

Scope of work in Jet airways, Mangalore :
- Marshalling Aircraft & Carrying out Transit Inspection.
- Carrying out Re-fuelling & other of inspections as per Transit card during transit.
- Monitoring Ground support equipments for weekly, monthly & yearly checks of Air starter (compressor type)., battery cart specific gravity checks.
- Maintaining Quality related documents such as Monthly Technical Instructions, Quality circulars, Trouble shooting Manuals, IPC, of NG 737-800/700.Quality circulars of ATR 72-500.

Scope of work in Jet airways, Chennai :
- Marshalling Aircraft & Carrying out Transit Inspection.
- Carrying out fuelling & other of inspections as per Transit card during transit.
- Carrying out Push back operation & despatching the Aircraft.
- Carrying out Layover Inspection during night halt.
- Carrying out Weekly Inspection in ATR-72-500 Aircraft.
- Carrying out Phase Intermediate check, Phase check-(A check) during night halt,which involves Compressor Wash, Main wheel change ,Nose wheel change, Lubrications,etc.
- Carrying out Phase checks (A-1 to A10), Bridging check, ATR -ACHECKS.

Scope of work in HAL, Bangalore :
- Preparation of Flight Release form & Necessary Documents for DGAQA Approval prior to flight operation.
- Preparation of “Load & Trim Chart” & Calculating C.G location prior to commencing of flight.
- Calculating Flight Hrs, Component Hrs, Engine Hrs after each flight & updating in Daily Inspection file.
- Interacting with Pilots,Flight Test Engineer & briefing them about the
Condition of the Aircraft prior to Flight.
- Receiving the snag reports from the pilots after each flight & logging it
in respective A/C Log book.
- Preparations of Quality schedules and Procedures of ALH Dhruv Helicopters
As per ISO 9001.
- Line Maintenance and Major Maintenance of ALH-Dhruv Helicopter.

Software Exposure :
- Ms-windows2007 (Excel, MS Word, etc), Editing, Typing of 60wpm.

Project Undertaken in A.M.E :
- Model of A-300, Helicopter Airframe.

Personal Profile :
Date of Birth : 15-04-1984
Father’s Name : Shridhar
Nationality : Indian
Languages known : English, Tulu, Hindi, Kannada, Malayalam, Konkani, Tamil.
Hobbies : Playing Drums & Tabla, listening to music etc.

Date : 13..12.09
Place : Mangalore-575002
(P.bangera)

[Guest]

CURRICULUM VITAE
M.S MOHAN KUMAR
Email :msmohan.kumar2 AT gmail.com

Career Objective
- Seeking a Challenging position in the Computer Technology and to work with an organization where my technical capabilities are fully utilized for the progressive growth of the Organization and the individual
Educational Qualifications
- B-TECH AERONAUTICAL ENGINEER (BATCHLOR OF TECHNOLOGY) From MALLAREDDY COLLEGE OF ENGINEER AND TECHNOLOGY ,affiliated to jntu University with 57%, Hyderabad in the year 2011
- Board of Intermediate From NALANDA JUNIOR COLLEGE in the year 2007
- S.S.C From V.S.K MEMORIAL HIGH SCHOOL in the year 2005.
Technical Skills
- Operating system : Ms-WINDOWS XP,2000,
- Packages : Ms-Office,
- Web technologies : AUTO CAD,ANSYS, PRO/E,CATIA,NASTAN PASTAN
Work Experience
- Had an experience of 6 months in call center out bond process
- 3 years experience in the field of Home tuitions
Strengths
- Self-Motivated, Dedicated and willing to work hard to achieve success.
- Always trying to learn new and update my knowledge.
- Good written, verbal and inter-personal communication skill.
Extra-Curricular Activities
- Active participation in all kinds of games and cultural activities.
- Active participation in seminars, group discussions and work shops
Academic Project Details :
PROJECT NAME : “QUALITY CONTROL ASPECT OF ADVANCED COMPOSITES
FOR AEROSPACE APPLICATION”
INDUSTRI : DEFENCE RESEARCH AND DEVOLOPMENT (DRDO)
MINISTER OF DEFENCE, GOVT OF INDIA
CLIENT : ADVANCE SYSTEM LABORATORY
SCIENTIST ‘D’ : Mr. JS.RAJU
ROLE : TEAM MEMBER
TEAM SIZE : 4
Project Description :
- Advance composite such as fiber reinforced polymer matrix composites are being used for aerospace applications because of their high strength, stiffness and low weigh. In order to design these structural components thorough characterization of material is required. In this project work high strength carbon fiber composite physical properties and NOL rings tensile strength is evaluated. A cylindrical vessel is fabricated by filament winding technology with known defect inside

[Guest]

UTPAL BANIA

Email : utpalbania.ame AT gmail.com
POSITION SOUGHT : AIRCRAFT TECHNICIAN
OBJECTIVE :
I intend to build a career with your organization with committed and dedicated people, so as to spread my wings for world class maintenance standards and to get in-depth knowledge in aviation industry. I am looking forward with confidence to a bright future and believe that my dedicated work will always keep the industry flying high.
Stream : Mechanical
Key Skills : Confident with Aircraft Maintenance aspects.
Total years of Aviation Experience : 3 years ,3 month
Current Location : Dimapur
TECHNICAL QUALIFICATION :
1. Completed 2½ years AIRCRAFT MAINTENANCE ENGINEERING COURSE in MECHANICAL STREAM from North East Institute of Aeronautics ,Guwahati gaining experience CESSNA-185 ( Light Aircraft, Piston Engine), Jet Engine(Turbojet,Turbofan & Turboshaft) & Heavy Aircraft.
2.CLEARED ALL SEMISTER :-(SEM1st-76.00%,SEM2nd-72.50%,SEM3rd- 75.13%,SEM4th-74.38%,SEM 5th-79.00%)

3.CLEARED PAPER-1 (Aircraft Rules and Regulation),PAPER -2(General Engineering)
4.Worked as an Apprentice (OJT) for six months in North East Shuttle (p) ltd.During this period engaged in Line maintenance & Scheduled Maintenance on the fleet of the following aircraft…………
- Cessna Caravan 208B Aircraft fitted with PT6A-114A engine
(All up Weight :3970 kg)
- Dornier 228-212 Aircraft fitted with TPE-331-252D-5A engine
(All up Weight :6400 kg)
- Dornier 228-201 Aircraft fitted with TPE-331-252D-5 engine
(All up Weight :5980 kg)
5. Working as a Technician,Engineering Department in Dimapur airport, North East Shuttle Pvt ltd
6.AREA OF WORK :
- Pre flight inspection,First flight of the Day,Last flight of the Day
- Daily inspection,weekly and
- Schedule maintenance.

EDUCATIONAL QUALIFICATION :

1. Passed Xth from Board of Secondary Education, Assam
2. Passed XIIth from Assam Higher Secondary Education Council, Guwahati. – 781021.
3. Diploma in software 1 years.
4. Post Graduate Diploma in Computer Application (PGDCA)
COMPUTER SKILLS :
Basic, Windows, MS Office, C Language, Internet and Networking.

[Guest]

CURRICULUM VITAE
MAYANK MAURYA

E-mail : mayank_maurya1 AT rediffmail.com

OBJECTIVE :

To use my knowledge and talent up to its optimum level in order to serve my
Organization with ample service and learn in order to improve my skills to become
a successful professionalism, possessing competent technical skills.

Current Location : Kanpur
Location Preferred : Anywhere in India
HOBBIES : listening music, and reading books
STRENGTHS : Self-aware - always seeking to learn and grow.
Positive attitude, Well-organized planner and
scheduler.
TRAINING AND EDUCATIONAL QUALIFICATIONS :
Examination Board or University Stream Year of Passing % of marks
AME Paper –II Institute of Aeronautical Engg. & Technology,Unnao Mechanical October 2010 86
AME Paper-I Institute of Aeronautical Engg. & Technology,Unnao Mechanical Feb 2010 73
Class 12 U.P Science 2008
69
Class 10 U.P General 2006 58
Total Aeronautical Engineering Experience : 3 years and continuing, passed all semesters from the Institute in mechanical stream.Also,I have completed ON-JOB-TRAINING from GARG AVIATION LIMITED,KANPUR.
Specialization
Good in computer works
Computer Skills
General work, Internet
Fields Of Interest
Maintenance

ASSURANCE :
I consider myself familiar with all Engineering aspects. I am also confident with my ability to work in a team. If I am given an opportunity,I assure you that I will work to the best of my knowledge and strive hard to make the difference.
I hereby declare that all the information stated above is true to the best of my knowledge.

[Guest]

CURRICULUM VITAE

Kushagra Mishra
E-mail : ashu.kushagra AT yahoo.com
ashu.kushagra AT gmail.com

Objective :

To work with my maximum potential in a challenging and dynamic environment and simultaneous contribute to the growth and success of my organization.

Credentials :
Exam Passed College Year of Passing Marks %
High School U.P. Board Allahabad 2002 64.17 %
Intermediate U.P. Board Allahabad 2004 61.4 %
Technical Qualification :

Exam Passed College/Institution Approved By Year Marks %
AME
(avionics stream)
Radio Navigation College of Aeronautical Engg. & Technology, Meerut Director General of Civil Aviation, Govt. of India
July-06 to Dec.-08
79.33%
6th Month Practical Training :
I have completed on the job Practical Training to cover Donier- 228 Turbo prop Transport Aircraft (Rotable Overhaul) for routine maintenance, snag rectification, component replacement etc. (Radio Navigation) in Hindustan Aeronautics Ltd., Kanpur w.e.f. 04/07/2009 to 05/01/2010.
3 Year Complete Certificate Cource :

5 Semester For Theoretical – July 2006 To Dec. 2008
1 Semester For Practical Training – 4th July 2009 To 5th Jan.2010

Computer Skill :
Database : - MS Office, MS Power Point
Operating systems : - WIN98, WIN-XP
Internet : - Net Surfing

Hobbies :
- Traveling, Making Good Friends

[Guest]

Vikas Gawali
Email : vikas_gawali AT ymail.com

Summary of Objectives :
To gain a challenging and responsible position as an aircraft maintenance engineer in an established organization where my professional experience will have valuable application towards proper maintenance of aviation systems.
Core Competencies :
- In-depth knowledge of aircraft components and maintenance procedures.
- Comprehensive knowledge of hydraulic and pneumatic systems, mechanicals surface controls and heating and cooling systems.
- In-depth knowledge of the theory, application and operation of aircraft.
- Familiar with the Federal Aviation Administration rules and regulations.
- Excellent analytical, managerial, communication, and problem solving skills.
- Ability to work in group and perform multiple tasks simultaneously.
Professional Experience :
Organization : Thakur Institute Of Aviation Technology Duration: 22nd Feb 2011 to 22nd Aug 2011

Designation : Maintenance Engineer-Aircraft

- Inspect, test, repair and install aircraft hydro mechanical and flight system components and aircraft engines, subassemblies and its components.
- Bench check of battery shop of Learjet-24 A/C fitted with CJ610-6 engines on avionics system. TIAT.
- Responsible for repairing, troubleshooting, inspecting and upgrading aircrafts.
- Perform preventative maintenance by inspecting aircraft engines, instruments, landing gear, pressurized sections, brakes and other parts of the aircraft .
- Handle responsibilities of pre-flight engine evaluations as well as maintain engine accessories and auxiliary motors.
- Responsible for testing engine operation by using testing equipment like ignition analyzer, distributor timer, compression checker and ammeter to locate source of malfunction.
- Perform all other maintenance work as required.
Organization : Air India
Duration : 23rd Nov – till date
Designation : Maintenance Engineer- Aircraft
- Worked with Boeing 777, Boeing 747 , A- 320, B- 777- 200 LR / B- 777 – 300 ER
- Responsible for the technical and mechanical maintenance Aircraft System and associated ground support equipment.
- Plan, coordinate, direct, and perform engineering assignments involving specifications for, and design changes to aircraft, engines, systems, and components.
- Handle the tasks of analyzing and evaluating aircraft and associated equipment proposals.
- Responsible for preparing technical data, procedures, drawings, reports, manuals, and other required publications .
- Evaluate operating data on components, parts and systems to establish causes and determine remedies for wear, malfunctions, or premature removals.
- Investigate and analyze project requirements and operating problems as well as develop solutions to meet safety guidelines.

Educational Summary :
Achieved Bachelor's degree in Aeronautical Engineering
- Thakur Institude of Aviation Technology

[Unregistered]

dear sir

I MANOJ AMBADAS SHINDE,have attached my resume.

please consider my resume.

[Unregistered]

(CURRICULUM VITAE)
SUMAN SAINI
(AME ENGINEER)

MY PROFESSIONAL PROFILE :
mail :rimjhimrani8 AT gmail.com AT gmail.

Aim to be associated with a progressive organization that gives me scope to apply my knowledge and skills along with my hard work and patience and Intended to build my career with leading organization. So as I want to work in such organization with an exciting journey of learning, innovation and leadership and look ahead where the horizon of my organization and career becomes absolutely unlimited!

ACADEMIC QUALIFICATIONS :
- Aircraft Maintenance Engineering[scoring 85%] from Alpine Institute of Aeronautics , Dehradun, Approved by DGCA govt. of India2007-2010
- Main Subjects :1.Piston Engine =87/100,2.Jet Engine Ist=86/1003.LA System=81/100,4.AC Instruments=86/100,5.Aerodynamics=75/100
- 2 Years course of I.T.I. from National Industrial Training Institute Regd. by Department of Industries Haryana Provisional National I.T.I. Certificate
- 10th passed with 62% by Science Stream in 2005
- 12th passed with 60.6% by Science Stream with Math’s score=80 in 2007

COMPUTER PROFFICIENCY :
- Good Knowledge of Basic (MS-Office 2010,Excel,Window7,Vista,etc)
- Good Knowledge of Internet Applications
- Good Knowledge of AutoCAD 2012,Fusion 2012

TECHNICAL EXPERIENCE :
- 3 Year Experience as SE in CAMTECH HEAVY ENGINEERING LTD. In New Delhi.
- 2 & half year Practical Experience of Institute [Mechanical Stream] from Dehradun.
- 6 Months Experience in LA ¬–CP (Mechanical Stream) from Border Security Force (B.S.F. Air Wing) in New Delhi on following Aircrafts :
- PIPER AIRCRAFT
- CESSNA-152 Type :-I & II Line and Base Maintenance
HOBBIES
- Making Aircraft Animations, Modern Art &Paintings I love my paintings a lot
- Reading Novels ,Short Stories, Magazines
- Net Surfing, Singing &Listening Music

STRENGTH :
- Hard Working, Sincere, Positive Approach and Analytical Mind. Smart Working Honest and dedicated for the work ready for new challenges in any aspect of life.
- Good communication skills required to perform my role on the Organization Platform.
- 6 Months Provisional Experience Certificate of Beautician from ALL INDIA WOMEN CONFERENCE in U.P.
- Provisional Certificate of Drawing from AROHI KALA SANATHAN.

PERSONALS DETAILS :
Fathers Name : Mr. C.P. Saini
D.O.B. :19 Jan 1990
Marital Status : Unmarried
Languages Known : English &Hindi
Nationality : Indian