Material Handling System Design Gurgaon : www.lahmeyer.in International India Ltd

[Vivek Rathore]

Lahmeyer International (India) Pvt. Ltd. Gurgaon : Lead Engineer - Mechanical - Material Handling System Design

Website: http://www.lahmeyer.in

Keywords: Meterial Handling, Design, Power, Consultancy, Mechanical

Designation: Lead Engineer - Mechanical - Material Handling System Design
Experience: 10 - 20 Years
Location: Gurgaon

Job Description:
Person would be responsible for Material Handling system Design for Power Plant.

Desired Candidate Profile:
Person should be Graduate Engineer in Mechanical Engineering from a reputed institute, with 10-20 Years of Exp. in Power Plant Design with Material Handling system design experience.

Company Profile:
Lahmeyer International (India) Pvt. Ltd. (LII), the Indian subsidiary of Lahmeyer International GmbH Germany, was established in 1993 as an independent consulting and engineering company offering a complete spectrum of technical, commercial and contractual advisory services in large Infrastructure projects, mainly in the Energy, Water and Transportation Sectors.
The Lahmeyer Group is one of the world's leading independent engineering companies, with headquarters in Bad Vilbel near Frankfurt. For over 35 years Lahmeyer Germany has been active in more than 140 countries as consultants in the Energy, Hydro Power, Water Resources and Transportation sectors.
The Lahmeyer Group companies 6 associated companies, 6 international branch offices as well as more than 50 representatives throughout the world.

Our services comprise studies, project concepts, approval and detailed design, tender preparation, supervision of construction, assembly and commissioning, operational consulting, project management and fiduciary project execution. We work in the following roles:
(i) Owners Engineer - Services to Owners / Developers
(ii) Independent Engineer - Services for Banks / Financial Institutions
(iii) Architect Engineer - Engineering Services to EPC Contractors
(iv) Technical Advisor - Services for Government and Utilities

Telephone: 0124-4698500

Send Your resume at info@lahmeyer.in

Corporate Office
Lahmeyer International (India) Pvt. Ltd.
Intec House
37 Institutional Area
Sector 44,
Gurgaon - 122002
India
Telephone: +91 124 469 8500
Fax: +91 124 469 8586

Kolkata Office
Lahmeyer International (India) Pvt. Ltd.
Building Alfa / Second Floor (Left Wing)
Bengal Intelligent Park, Block - EP & GP,
Salt Lake Electronics Complex
Sector V, Bidhan Nagar, Kolkata - 700 091
India
Telephone: +91 33 4011 0400
Fax: +91 33 4006 1313

[Guest Poster]

CURRICULAR VITAE
DEEPAK MEHTA
BEANT COLLEGE OF ENGINEERING & TECHNOLOGY,
GURDASPUR
E-MAIL: baj_rang28 AT yahoo.co.in
Contact no: +91-9855553412

CAREER OBJECTIVE
“A career in an enterprise with a commitment to excellence & offering growth prospects where my skills can be utilized effectively.”

ACADEMIC PROFILE
- B.TECH in MECHANICAL ENGINEERING (2006-2010) from Beant College Of Engineering and
Technology, Gurdaspur with 65% (up to 6th Semester)

- Scored 66% in CLASS XII (CBSE BOARD) from Bhavan’s sl public school, Amritsar
in 2006

- Scored 83% in CLASS X (CBSE BOARD) from Bhavan’s sl public school, Amritsar
in 2004

TECHNICAL SKILLS
- AUTO-CAD
- PRO-e
- CNC MILLING

STRENGTHS
- Understand Machines Better
- Patient
- Optimistic
- Management
- Logical/problem Solving

AREA OF INTEREST
- Designing: Auto-cad, PRO-e
- Auto Mobiles
- Construction line & Manufacturing line
- Refrigeration
- Fluid mechanics
- Thermodynamics

TRAINING & PROJECTS
- TWO MONTHS training in JUNE-JULY (2007) in the workshops (foundry, smithy, welding, fitting, machine, sheet metal, electrical & carpentry) of BEANT COLLEGE OF ENGG. & TECHNOLOGY,GURDASPUR.

- SHORT TERM training from 10-6-08 to 31-7-08 in NORTHERN RAILWAY MECHANICAL WORKSHOP AMRITSAR.

Shops Attended :- 1. Wagon Shop
2. Diesel Shop
3. Heavy machine Shop
4. Mill wright Shop

Project Undertaken :- GEARS
- SIX MONTHS INDUSTRIAL TRAINING from JUNE to DECEMBER (2009) in CENTRAL INSTITUTE OF PLASTIC ENGINEERING & TECHNOLOGY, AMRITSAR (ISO certified 9001:2000, BVQI).

ACHIEVEMENTS AND PARTICIPATION
- First prize in CAD contest organized in TECHKRANTI-2009, the annual national level technical festival.
- First prize in COLLAGE MAKING event organized in JUVENTUS 2k8, the annual national level technical festival.
- Third prize in ASSEMBLE-IT (finals) event organized in JUVENTUS 2k8, the annual national level technical festival.
- Participated in BRIDGE BUILDING competition.
- An active member of Hostel mess committee.
- Participated in Blood Donation camp.
- Awarded in 9th std. for rendering maximum contribution for a social cause.

HOBBIES
- Watching Discovery & National Geographic Channel
- Doing Car Stunts
- Listening Punjabi, Rap & Hip-Hop Music

PERSONAL DETAILS
Father’s Name : Mr. Dinesh Mehta
DOB : 27-08-1987
Permanent Address : HL-86 Roop Nagar, Amritsar-143001
Contact Number : +91-9855553412

DECLARATION
I hereby confirm that the above information is true to the best of my knowledge and understanding.

[Guest]

CURRICULUM-VITAE
E-mail : plk_das AT yahoo.com
PULAK DAS(Total Experience – 31 years)
VINAR SYSTEMS Pvt Ltd, Kolkata
2010 November to Present as a ‘Sr. Manager (Design)’
Vinar Systems Pvt Ltd is a leading turnkey solution provider & engineering company with complete solution for Material Handling System designing & manufacturing facilities. We had been executing different projects for feeding system for various Steel / Power Plants. Shyam Steel, Durgapur & Electrosteel, Bokaro etc. Presently working with Unit Handling System for transfer the material from one point to another in various way through Overhead Conveyor.
Nature of job :
- To developed plant layout drawing for Material Handling System from Ground Hopper to Bunker building through various Belt Conveyor followed by Crusher & Impactor etc. To lead a group of junior for Preparation of General Arrangement & Detail of Equipment Drawing like Head / Tail Frame , VGTU / HGTU, Bend Frame, Drive Frame & Stringer drawing etc. Aapart from this I am woking also Over Head Conveyor for Unit Handling System for pull calculation, Layout Checking, Drive & Motor selection. etc
CONVOTECH PROJECTS Pvt. Ltd, New Delhi
2009 January to 2010 October as a ‘Manager (Project & Design)’
Convotech Projects is a leading turnkey solution provider & engineering company with complete solution for Material Handling System designing & manufacturing facilities. We had been executing different projects for Coal Handling / Material Handling System for various Power / Steel Plants such as Grace Industries Ltd., Nagpur
Nature of job :
- To developed plant layout drawing for Coal Handling System from Ground Hopper to Boiler Bunker building through various Belt Conveyor followed by Crusher & Impactor. To lead a group of junior for Preparation of General Arrangement & Detail of Equipment Drawing like Head / Tail Frame , VGTU / HGTU, Bend Frame, Drive Frame & Stringer drawing etc.with preparing bill of material using Auto-CAD 2008 for Belt Conveyor. Apart from this factory supervision & site supervision done for erection requirement time to time.
ENEXCO Tecknologies India Ltd, New Delhi
2004 December to 2008 December as a ‘Sr.ENGINEER’
ENEXCO working in the field of turn-key projects for Cement Plants modernization. Enexco is a well known group in Asian sub-continental as well as India. Presently working in Jabel Ali cement plant, Dubai, project for extraction system from raw material to finished product (cement) in various process.
Nature of job :
- Drawing for Deep Pan Conveyor, Belt Conveyor as well as Bucket Elevator to convey the material from feeding point to discharge point in horizontal as well as vertical way. To lead a group of junior for Preparation of General Arrangement & Detail of Equipment Drawing like Head / Boot Casing as well Intermediate Casing, Sprocket, Head /Tail unit, stringer, guide fame of belt conveyor Silo, Hopper, Piping Detail (Pipe Rack & Pipe Support), Isometric pipe line, Fabrication Drawing etc.with preparing bill of material using Auto-CAD 2008 .
SMS DEMAG PVT. LTD. New Delhi
(German Multinational-Fortune-500)
1996 June to 2004 November as a ‘CAD DESIGNER’
SMS Demag working in the field of turn-key projects for Steel Plants modernization. Demag is a well known group in western countries as well as Asian sub-continental in various field. Worked in Jindal steel plant, Orissa & TISCO, Jamshedpur project for fume extraction system of Sub-Merged Arc Furnace & Ladle Heating Furnace.
Nature of job :
- General Arrangementr drawing for Rolling Mill (Plate Mill) equipment such as Snuber Roll, Pintch Roll, Flatner, Pay off Reel,Tension Reel, Shear etc. Blast Furnace (worked on 350 cum Blast Furnace for Kudermukh Projects) such as Big Bell, Small Bell, Up Takes Down Comer, Shell Body, etc. Slub Cater equipment such as Run Out Roller Table, Tundish & Movable Stopper etc. Fume Exhaust System for Ladle Heating Furnace through Spark-Arrestor followed by Stack for Gas Cleaning Plant etc.with preparing bill of material using Auto-CAD 2004.
WELLMAN INCANDESCENT INDIA LIMITED, Calcutta
1988 Aug. to 1996 May as a ‘Sr.CAD DRAFTSMAN’
Wellman involved in various Heat Treatment Furnace with its own technology for various steel plants such as Durgapur Steel, Bokaro Steel Plant etc.
Nature of job :
- General Arrangement drawing for Heat Treatment Furnace (such as Bogie Hearth, Fixed Hearth, Grooved Hearth, Rotary Hearth) Structure, Rail & Sleepers Detail, Door Drive & Bogie Drive Assembly & Details, Piping Layout, Combustion Air Pipe Line, Air Oil Pipe Line, Ceramic Fiber Lining etc.with preparing Bill of Material using Auto-CAD R-12.
FIRE, GAS &KILN (INDIA) PRIVATE LTD, Calcutta
1981 April to 1988 July as a ‘Sr.DRAFTSMAN’
Fire, Gas & Kiln involved in Furnace, Oven & Kiln for various projects for different client.
Nature of job :
- General Arrangement drawing for Furnace structure, Rail & Sleepers detail, Door Drive & Bogie Drive Details & Assembly, Piping Layout, Combustion Air Pipe Line, Air Oil Pipe Line, Ceramic Fiber Lining etc.with preparing bill of material.
COMPUTER SKILL :-
Operating System : Windows XP
Application Package : Auto-CAD 2008 with Mechanical Power Pack (version 6.0) & MS-Office.
EDUCATION
B.Sc. (P.C.M) - from Calcutta University in 1981.
Auto-CAD - from Regional Computer Center, Jadavpur University in 1992.
B-TECH (Mech.) – from Rajasthan Vidyapith 2010.