NDT Welding Inspector Chennai Trichy Coimbatore : www.scanstarndt.co.in Scanstar NDT Services

[Admin]

Scanstar provides services in diverse industrial fields such as Power Generation, Petrochemical, Oil & Gas, Cement, Alternate Source Of Energy Etc.,

Scanstar provides services on all stages basic from Raw Material to Finished Products to attain Quality.

Scanstar NDT Services is ALWAYS on the lookout for the right kind of personnel. If you are Hard-Working, Punctual, a Team Player with a Willingness to take on New Challenges then please feel free to forward your CV to info@scanstarndt.co.in

http://scanstarndt.co.in/career

Required Personnel
NDT Inspectors
Welding Inspectors,
Quality Control Inspectors,
Piping Inspector


SCANSTAR NDT SERVICES
HEAD OFFICE
CHENNAI
R35/3, Nilgiris Apartments,
T. S. Krishna Nagar,
Annanagar(west) Extn.,
Chennai, Tamilnadu, India - 600050.
Contact Person.: Mr. S. Daniel
Mobile: +919444376043
Ph.: +91-44-42690409, Telefax: +91-44-42690401.
email: info@scanstarndt.co.in

BRANCH OFFICE
TRICHY
No.: 19, Selvi Complex,
48/5B, Tanjore Main Road,
Near Malaikovil Bus stop,
Thiruvermbur, Trichy - 600013.
Contact Person.: Mr. S. Samuel.
Mobile.: +919940187582.
email: info@scanstarndt.co.in

COIMBATORE
No. 18, Priya Complex,
Madukkarai Main Road,
Sundrapuram, Coimbatore - 641024.
Contact Person.: Mr. S. Samuel.
Mobile.: +919940187582.
email: info@scanstarndt.co.in

[Guest]

RESUME
N. SARAVANAN

E-mail : ibrsaravanan AT gmail.com
Academic Qualification : Currently studying DIPLOMA IN MECHANICAL
ENGINEERING in distance education (2011-2013)
ITI(WELDER ) from GOVERNMENT ITI - CUDDALORE
Technical Qualification : AWS – CWI (Certificate No:-10082401)
ASNT Level II As per SNT-TC-1A in
# Magnetic Particle Testing,
# Liquid penetrant Testing,
# Radiographic Testing,
# Ultrasonic Testing,
# Radiographic film interpretation

Summary of Experience :
Over 11 years of experience including 3 years in abroad and 8 years in India worked as a QA/QC Inspector, welding Inspector, NDT Technician, Welding foreman, Welder in Various petrochemicals, Refineries, Oil and Gas plants, well Head Projects, Boiler and pressure vessels, shutdown jobs in various projects in various country with various coordination & Requirements.
Nature of Duties and Responsibilities
Performing all stages of inspection during shop & site fabrication of piping/vessels/structural for Saudi Aramco Projects. Conducting welding Qualification test under TPI/Client, and Preparation of welders certificates / ID Cards. Conducting & witness of NDT and subsequent interpretation of RT films and hydrotest witness as per applicable code of construction and client specification Requirements. Liaison with TPI/Saudi Aramco Inspector for stage inspection. Preparation and compilation of all welding / NDE/ PWHT/ Final Dimensional documentation and other QC Related Records.

Working Experience
project Assignments
January 2011 to July 2011
Company name : Nassar AL-Hajri corporation
Project : jubail Export Refinery Project.
Position : Welding Inspector
- Interpretation of Ultrasonic Testing, Radiographic Testing, Liquid Penetrant Testing, Magnetic Particle Testing.
- Liquid Penetrant Testing and Magnetic Particle Testing in fabrication parts.
- Prepared reports like UT, Radiography (Film evaluation).
- Ultrasonic, Radiography, Penetrant and Magnetic Particle testing of Pipelines.
- Interpret Drawings and other documents.
- Radiography of prefabricated weld joint of pipes using gamma ray.
- Familiar in single wall – single image, double wall – double image, elliptical, Panoramic & Super impose (dia Range from – ¾ Inch to 56 Inch)
- UT lamination and thickness survey of ages both erosion and corrosion components, vessels, piping and tubing of petroleum, Refinery, Power and Chemical Industries.
- Functional as UT gauging Inspector for doing corrosion survey of machine vessels according to classification rules.
- UT Lamination check on raw materials.
- Good experience in film processing and interpretation of films.
January 2010 to December 2010
Organisation : CITHAAR VESSELS LTD.
Position : QA/QC Inspector (Welding)
Involved in carrying out Welder Qualification, NDT Co-ordination, reviewing of radiography films, witnessing other NDT methods, witnessing of hydrotest and coating inspection, witnessing bolt tensioning of the flange and verify proper alignment etc, prepared all QC related documents & Test pack submitted to the client for final clearance, well experienced in inspection during construction and maintenance projects.
- Carried out the wall thickness in the vessel and heaters (inside tubes) and drum and tank
- Carried out the DPT in the pipe lines and exchangers and vessels heaters.
- Carried out the MPI in vessel dish end.
- Carried out the complete internal and external inspection in the vessels, Exchangers, (tube sheet and tube bundle), columns (inner trays), pipe lines, Heaters, fin fans (headers) and also do the NDT inspection on the Equipments.
- Carried out the UT scanning in the reactors.
- Carried out RT, UT, MT, and PT for all Boiler components.
- NDT Inspection (RT, MT, PT) methods on welded parts, Boiler drums as per Customer Quality Plan.
- Ultrasonic, Radiography, Penetrant and Magnetic Particle testing of vessels, Heat Exchangers and Pipelines.
- Carried out UT on wind mill towers and water panel tubes.
- Radiography of tanks, vessels, pressure parts, prefabricated weld joint of pipes using gamma ray.
- Familiar in single wall – single image, double wall – double image, elliptical, Panoramic & Super impose (dia Range from – ¾ Inch to 56 Inch)
- UT lamination and thickness survey of ages both erosion and corrosion components, vessels, piping and tubing of petroleum, Refinery, Power and Chemical Industries.
- Functional as UT gauging Inspector for doing corrosion survey of machine vessels according to classification rules.
- UT Lamination check on raw materials.
- Good experience in film processing and interpretation of films.
November 2007 to December 2009
Client : FISIA
Contractor : BELLELI ENERGY SPA.
Project : Dubai Electricity & Water Authority
Position : QC Inspector
Assigned as a QC Inspector (Welding) performing field welding Inspection of main line production welding.
- Witnessing of welder and procedure approval test where necessary.
- Verifying that adequate and valid welder approvals are available and that only approved welders are used in production
- Perform visual inspection of welds including :
- Verifying parent material identify.
- Verifying correctness of welding consumables
- Verification that dimensions, fit-up and weld preparations are in accordance with WPS and Drawings.
- In-process welding surveillance to verify compliance with specified procedure including any preheat, interpass temperature control and post heat requirements.
- Completing and endorsing all inspection records from initial inspection till final acceptance of the weldments.
- Maintaining interface with client to ensure that all contractual and code requirements are met as far as the inspection scope is concerned.
- Supervise the activities of the NDT crews and follow their production.
- Prepare and issue request for NDT as required and hand it over to the NDT subcontractor.
- Evaluation of Radiographic Films.
December 2005 to July 2007
Company : CITHAAR VESSELS.
Position : Welding Foreman

- Involved various welding processes such as SMAW, SAW, GTAW ,GMAW and FCAW
- Overall charge of the fabrication, execution, testing and inspection at the workshop.
- Responsible for the traceability of all welding
- Ensuring that welding procedures are adhered to
May 2000 To Augest 2004
Company : Neyveli Lignite Corporation
Position : Welder(first class)
- Radiographic testing of the pipelines, Structural and plate joints.
- Carried out the wall thickness in the vessel and heaters
- UT Lamination check on raw materials.
- Carried out the complete internal and external inspection in the vessels, Exchangers, pipelines & heaters
- Magnetic particle Testing & Dye penetrant testing of structural weld jobs.
- Darkroom Activities.
- Evaluation of Radiographic Films.
Overall Responsibilities
- Involved in carrying out Welder Qualification. (Preparing Welders Certificate / Card as per the Code and specification).
- Involved in checking of the drawings and releasing for construction.
- Preparation of weld mark up drawing for various jobs i.e. Station Piping job, Flow lines etc.
- Co-ordinate with the production people to get the requirements as per the standards and codes.
- Coordinating with the NDT personnel and prepare a work schedule as per the required job.
- Reviewing Radiographic films day to day and witnessing the other NDT methods.
- Involved in maintaining Quality Documents as per the work progress.
- Co-ordinate in hydro tests at the time of testing & also checks the calibration certificates.
- Release the documents after fabrication, installation, painting and commissioning.
- Updating welders performance log and submission to Client for review
- Preparation of documents in Test Pack format for various job orders
- Reviewing of NDT procedures, Quality control plans and other standards related to the work.
Other Technical Dealing
Exposure to Various Welding Process for carbon Steel, Low Alloy Steel, DSS and its Dissimilar Welding.
Conversant of codes / : ASME SEC V, VIII, IX, ANSI B 31.3,
Standards API-1104 & AWS D1.1
I hereby declare that all the above stated information is true and correct to the best of my knowledge and belief. I assure you that I will do my duties with much zeal and dedication for the development of your concern.

[Guest]

CURRICULUM VITAE
A.GANESAN.
E-Mail : ganesan2007 AT gmail.com .


CAREER OBJECTIVE
To grow as an individual where in my knowledge and skills will be utilized to the maximum benefit of the organisation and attain a position where leadership skills and decision-making Plays a key role.
.
EDUCATIONAL QUALIFICATION
Si.No
Educational
Qualifications
Institution
University /
Board
Period of Study
1 ( D.M.E)
Diploma In
Mechanical
Engineering.
Sri Ayyappa Polytechnic,
Aivadhugudi.
Directorate of Technical Education,
Chennai.
1998 - 2001
2
SSLC

G.H.School,
Variyankaval.
State Board of
Education.

1997-1998
TECHNICAL SKILL
NDT : ASNT Level II Qualified for RT,UT, MT & PT
CSWIP 3.1 SPONSER BY PUNJLLOYD
MY CSWIP CERTIFICATE NO : 3 5 4 7 6
DATE OF EXPERI : 26 JUNE 2013

EXPERIENCE PROFILE
TOTAL EXPERIENCE –9 YEARS.
Organization : PUNJLLOYD LTD. ABUDHABI
Experience : FROM JUN 2008 TO TILL DATE
QA / QC INSPECTION ENGINEER
(BOROUGE2 PROJECT ) AT ABUDHABI
Organization : LARSEN & TURBO LTD ECC Division.
(Aarvi Encon Private Ltd)
Experience : FROM 01JAN 2008 TO 17jun2008
QA / QC INSPECTION ENGINEER in REALIANCE JERP
(Jamnagar Export Refinery Project) RPL Site Under subcontractor of
Organization : PROMAN CONTRACTING TRADING CO LLC
Location : (Methanol Project) SOHAR PORT NEAR MUSCAT.
Experience : FEB2007 To JULY.2007
Post Held : WELDING & PIPING Quality Inspector
Organization : IGP Engineers Pvt. Ltd. ( ISO 9001-2000)
Experience : OCT2003 To Feb 2007
Post Held : Welding Quality Inspector
JOB Responsibilities :-
- To Conduct Welder qualification test as per the W.P.S. and sec IX requirements.
- To maintain records as per the WPQR preparation of test piece to be given to welders.
- To maintain records of welders after Qualified by the Test piece NDT & Destructive activities to be carried out according to ASME SEC IX.
- To Check the type of pipe & filler wire materials as per the Fluid code service condition.
- To maintain Pre heating & Baking temperature of Electrodes according to the ASME Sec-II.
- To check the fit up and weld visual according to the client specification.
- To check the dimensions of the M/L as per the ASME B16.20 – 1998 Std.
- To Ensure Alloy steel & Stainless steel Material composition with PMI test Instrument.
- To maintain pre heating & Post weld Heat treatment activities as per the client specification.
- To check surface NDT Penetrant inspection on Weld Joints , Equipments , Components such as Extension bellows etc.
- To conduct NDT activities like UT,MPT, DPI, HARDNESS,PNUMATIC & HYDRO- TESTING of piping at AG also which are connected to Vessels, heat exchangers , Nozzle etc.
- To check and initiate ISO CLEARANCE requirements as per the completed erection line drawings.
- Familiarity with ASME B36.1& ISO 9001 :2000 Certificate Related department activities.
- Well Experienced in Inspection of welded Metals as per the Standard Practice of ASME SEC IX,ASME B31.1,31.3,SEC V& AWS D1.1.
EXPERIENCE & SKILLS
- Having vast experience in sandblasting and painting inspection also.
According to the client specification.
- Quality control to execute a specialized product namely “ Monolithic Insulation Joint”.
- We are the first and only manufacturer in the country to produce this product.
EQUIPMENT HANDLED :-
ROCKWELL HARDNESS, BRINEL HARDNESS, VICKERS HARDNESS.

PMI machine. (NITON)
MAGNETIC PARTICLE Testing of MAGNETIC YOKE OF AC – DC.
Organization : Maya Appliances (P) Ltd, Chennai - 96
Experience : APRIL 2001 TO OCT 2003
Designation : Quality Inspector.
NATURE OF JOB
- In- Process Inspection Activities,
- Inward material inspection,
- Vendor quality inspection Activities,
- Checking Hardness report as per material standard,
- To check time to time all the Rejections by visible and corrective actions to be taken as per
the Work instruction.
.
SOFTWARE PROFICIENCY
OPERATING SYSTEM : Windows 98, XP,
PACKAGES : MS-Office,
DESIGN PACKAGES : Auto Cad 2000,
PROJECTS DETAILS
- D.M.E (Diploma in Mechanical Engineering)
Title : Recondition of java diesel engine.

[Guest]

QA/QC ENGINEEER & WELDING INSPECTOR IN 4 YEARS EXPERIENCE

V.VIGNESHWARAN
E-mail :v.vigneshwaran86 AT gmail.com

OBJECTIVE :
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.
EDUCATIONAL PROFILE :
Academic Qualification :
- B.E in Mechanical Engineering from Sudharsan Engineering College, Anna University, Chennai, Tamil Nadu with First class, 71.00% in 2004 – 2008
Technical Qualification & Certification :
- CERTIFIED SCHEME FOR WELDING INSPECTION AND PERSONNAL
(CSWIP 3.1)- Certificate No : 58132, Date of Expiry: 29/07/2016
- ASNT- NDT (LEVEL -II)
- Radiography Test
- Ultrasonic Test
- Magnetic Particle Test
- Liquid Penetrate Test
Software Exposure :
- Operating System Win XP,VISTA
- Office Tools M.S Office for Window
- CAD Tools Auto CAD, CADian, Pro/E, VARI CADD
Code Knowledge :
- ASME Sect. II Part A ( Ferrous Material Specification)
- ASME Sect. V ( Nondestructive Testing Examination)
- ASME Sect. VIII D1 (Rules for Boiler & Pressure Vessels)
- ASME Sect. IX (Welding & Brazing Qualification)
- AWS D1.1 (Structural Welding)
- API 1104 (Welding of Pipelines)
EXPERIENCE : (Total Experience – 4 Years)
1) Name of the Organization : M/s SUPERTHARRM ENGINEERS PVT LTD
Duration : 20/10/2010 to TILL DATE
Position : Quality control Engineer
Projects Handled
Customer : M/s THERMAX LTD , WEST KENYA SUGARS LTD,
RENUKA SUGARS LTD, NHEC,

Project : Boiler Pressure Parts of Economizer Coil, Headers,
Inbed Coils, Panel, Convective Superheater Coils,
Radiant Superheater Coils & Steam Line Piping
ROLES AND RESPONSIBILITY
- Review of Radiography films and updating of RT status to get approval from client
- Witnessing and guiding the contractors for the weld repairs.
- Fit up inspection before welding to ensure material grade and dimensions are as per drawing and client specification and as per WPS.
- Witnessing Hydro tests as per the procedure
- Coordination with the client to get the QC approvals at Various stages
- Final weld visual inspection of finished welds before release for NDT.
- Job inspected as per Customer Quality Plan
- Prepare the Inspection Test Plan and QA/QC procedures for the project in accordance with client requirement
- Preparation of fit up, weld visual inspection reports on daily basis.
- Witnessing of NDT tests and interpretation of NDT results
- Witnessing dye penetrate test after root run.
- Good knowledge in welding processes SMAW,GTAW,GMAW,SAW
2) Name of the Organization : M/s INDIANA GRATINGS PVT.LTD, JEJURI, PUNE
Duration : 05/05/2008 to 19/10/2010
Position : Quality control Engineer
Projects Handled
Customer : M/s THERMAX LTD, BHEL TRICHY, LANCO
INFRASTRUCTURE LTD, CETHAR VESSELS LTD
Project : I Beam, Structural Beam, Boiler Supporting
Components of Cruciform Column, Box Bracings,
I Column, Monorail, Tie Beam, Box Column &
Buck stay Beam
ROLES AND RESPONSIBILITY
- Responsible to prepare QAP & WPS/PQR/WPQ
- Incoming material inspection verifying the test certificates
- Verifying the electrodes and welding voltage, amperage are as per the WPS
- Responsible for monitoring daily inspection in Production shop.
- Reviewing NDT procedures and standards.
- Incoming welding consumable inspection and review of consumable batch test certificates
- Monitoring & recording welding parameters when qualifying weld procedures
- Fit up inspection, to ensure the material specification as per the drawings before welding.
- NDT inspected as per customer requirement.
- Raw material shall be inspected as per IS 1852, IS 2062, A6, A36.
- Job inspected as per Customer Quality Plan, AWS D1.1, IS 7215.
- Coordination with production staff and main contractor regarding all QC matters
- Report on daily inspection and testing activities
- Final weld visual inspection of finished welds before release for NDT.
- Good knowledge in welding processes SMAW,GMAW,SAW
Declaration :
I hereby declare that the information furnished above is true to the best of my knowledge.
Date : Yours Truly,

Place : (V.VIGNESHWARAN)

[Guest]

Application for QA/QC and Welding Inspector
CURRICULUM VITAE
NAME : S.DHEERAN
E-mail : ssdheeran AT gmail.com
Objective : To obtain position as a quality control engineer in mechanical Engineering field. Seek environment where my skills and loyalty will be rewarded with career advancement and guidance.
Education :
Diploma in Mechanical Engg_2000-03 : D.S.P, Perambalur, Tamil Nadu, India.
Degree aggregate – 80.33%.
B.E in Mechanical Engg_2003-06 : Dr.N.N.C.E, Tholudur, Tamil Nadu, India. Degree aggregate - 67%.
Software packages : AutoCAD & MS Office Suite.
Professional affiliations : ASNT LEVEL-II Qualified in PT, RT, UT, MPT & VT.

Work Experience : Interfit Techno Products Limited. Coimbatore, Tamil Nadu, India. Manufacture of Ductile Iron Fittings, SG Fittings and SS Ball Valves for fire & safety Protection, Oil Pipe lines, HVAC Systems, Water pipe line, etc. From Mar’10 to Oct’12. Quality Engineer.
Responsibility : - To carry out all inspection and requirements as per ITP’S
- Maintain latest revision of relevant specifications, Contract documents and drawings pertaining to the discipline.
- Supervise the implementation of the relevant QA/QC procedures, QC plans and work instructions.
- Maintaining the records of calibration, inspection and testing equipment as per the quality system procedures.
- Responsible for collating and monitoring quality records, recording and reporting quality activities including liaison with CLIENT in quality matters.
- Co-coordinating quality audit and take appropriate corrective and preventive actions for closing out the CAR’S.
- Support third party inspection for DI finished castings and prepare reports for them.
- To carryout inspection and test activities as per QC plan requirements for client specifications, international codes and standards as applicable.
- Responsible for verification of calibration status of inspection, measuring and test equipment (IMTE). - Witnessing Hydro tests for fittings and couplings.
FI Auto components Private Limited. Ambattur, Tamil Nadu, India. Manufacture of brakes Component of handling quality related activity. From Aug’06 to Feb’ 10. Quality Engineer.
Responsibility : - Inspection of incoming materials as per release notes.
- Checking in line process and final process as per drawings.
- Maintaining quality records. - Maintaining the records of calibration, inspection reports. - Production & Rejection Analysis & take corrective action against rejection. - Customer end coordinator- Quality Maintaining quality of products.

Personal details : Date of Birth : 24.09.1984 Father’s Name : S.K.Selvaraj Mother’s Name : S.Vasuki Sex : Male Nationality : Indian Languages Known : Tamil, English
Passport details : Pass port No : G2140724 Validity : 03.04.2017
Declaration :
I do hereby declare that the above said facts are true to best of my knowledge and belief.
Date : S.Dheeran
Place :