www.bonfiglioliin.com Transmissions Pvt Ltd Chennai : Heat Treatment Engineer

[Admin]

JOB ID - 7 : ENGINEER HEAT TREATMENT
NO OF VACANCY : : 1
LOCATION : CHENNAI
AGE : 24 - 30 YRS
MIN EDUCATION : DME / BE (MECHANICAL / METALLURGY)
EXPRIENCE : MINIMUM 5 YRS
DESIRED PROFILE : EXPERIENCE IN HANDLING SEALED QUENCH FURNACE / PIT TYPE FURNACE STRONG KNOWLEDGE OF METALLURGY ,TESTING OF STEEL MATERIAL AND COMPONENTS USING NEW GENERATION INSPECTION EQUIPMENTS ,SAFETY ASPECTS

The ever growing export share has led Bonfiglioli into the most far away countries. With expansion plans entailing a further growth of the sales network Bonfiglioli aims at improving both the competitiveness of its products and the effectiveness of the customer service. In every market place Bonfiglioli is committed to improve the customer satisfaction by offering state-of-the-art technology and shorter deliveries. Nowadays branch companies and BEST partners bearing the Bonfiglioli name are operating in seventeen countries outside Italy, with sales and service in the other countries managed by appointed dealers. The domestic network is made up of 30 sales office and representatives and 100 dealers operating with their own warehouse and supporting customers locally. Throughout the world Bonfiglioli's reputed know-how and ser vice guarantee effective and timely assistance.

Submit your CV: bonfighr@bonfiglioliin.com

Chennai: Bonfiglioli Transmissions Pvt. Ltd.
Plot No. AC7-AC11, SIDCO Industrial Estate, Thirumudivakkam, Chennai - 600044.

Ahmedabad : Bonfiglioli Transmissions Pvt. Ltd.
No.A/812, 8th Floor,"SAFAL Pegasus",100 Feet Road,Pralad Nagar,Satellite,Ahmedabad - 380015.

Bangalore: Bonfiglioli Transmissions Pvt. Ltd.
No.427/14-1, 1st Floor,Harmony,9th Main ,5th Block, Jayanagar, Bangalore - 560041.

New Delhi: Bonfiglioli Transmissions Pvt. Ltd.
1016-1017,10th Floor,89 Hemkunt Chambers,Nehru Place,New Delhi -110019

Indore: Bonfiglioli Transmissions Pvt. Ltd.
MSB 209, New Siyaganj,VIP Road,Indore - 452007.

Kolkata: Bonfiglioli Transmissions Pvt. Ltd.
Flat 'F' 5th Floor, Trinity Building, 226/1, AJC Bose Road, Kolkata - 700020.

- Mumbai: Bonfiglioli Transmissions Pvt. Ltd.
241,HallMark Commercial Centre,Near Nirmal Lifestyle,L.B.S Marg ,Mulund West, Mumbai - 400080.

Secunderabad: Bonfiglioli Transmissions Pvt. Ltd.
Flat #712, Seventh Floor, Swapnalok Complex,92/93,S.D.Road,Secunderabad-500003 Andhra Pradesh.

- Pune: Bonfiglioli Transmissions Pvt. Ltd.
1, Business Avenue (Opp. Sony World), Sanghvi Nagar, Aundh, Pune - 411007.

www.bonfiglioliin.com

[Guest-IJT]

Dear Sir,
I have completed my Diploma in MECHATRONICS with mark of 82% in the year. I am looking for a suitable job of my field and a good platform where I can work with full devotion & enthusiasm. I wish to stand with a solid backbone to make feel proud of my employer with my hard work and loyalty.
Sir, I would be grateful if you could consider my candidature for the job of suitability and provide me an opportunity to prove my worth. I am enclosing my resume for your kind consideration and favorable reply please.
Thanking you.
Yours Sincerely,
KRISHNENDU SEN GUPTA.

RESUME
KRISHNENDU SEN GUPTA

Contact Details : -
Email : krishnendu.sengupta29 AT gmail.com , raja_sngpta AT rediffmail.com
PRESENT ORGANISATION : TAL Manufacturing solution Ltd. (A TATA Enterprise)
CURRENT DESIGNATION : Trainee Engineer
JOB PROFILE : Maintenance
TOTAL EXPERIENCE : 2.9 YEARS
CURRENT LOCATION : Pune
DATE OF BIRTH : 29th August 1985

OBJECTIVE :
- To enter into the Mechatronics field as a specialist in industrial automation engineering and to explore the latest technologies in PLC ,Servo drives and HMIs to equip me to contribute better to the organization’s growth
- To prove myself a productive asset to the organization where my knowledge, talents, skills and experience can be effectively utilized towards achievement of organization’s profit, wealth, goodwill and other social aspects that serve the ethical interests of the organization.
- To grow and diversify according to the organizational needs.

EDUCATION :
Year Degree School/ College/ Institute Board/ University Percentage
/ CGPA
2005-2008 Diploma In Mechatronics R.D.Tata Technical Education Centre NTTF,
(Jamshedpur) 82%
(Distinction)
2005 12th (I.Sc) Mrs. KMPM Inter College, Jamshedpur JAC
(Ranchi) 54.60%
(2nd div.)

2002 10th Kerala Samajam Model School, Jamshedpur ICSE
(New Delhi) 66.40%
(1st div.)
Note : Kerala Samajam Model School is an ISO 2000 certified school.
NTTF is an ISO 9001 certified training institution
RELEVANT EXPERIENCE :
1. Presently working as Trainee Engineer (July 2009-Till date) as maintenance at TAL Manufacturing Solution Ltd. (A TATA Enterprise) in pune earlier known as Telco or TATA AUTOMATION LIMITED. It is the wholly owned subsidiary of TATA MOTERS.

2. Completed nearly One year (September 2008- July 2009) on job training upon CNC Programming, maintenance, Manufacturing and Assembling at Makino India Pvt. Ltd., Bangalore.

3. Worked as Purchase Engineer (April 2008 – August 2008) at BCH Electrics Limited, Faridabad, New Delhi.

PROFESONAL RELATED SKILL SET :
Tal Manufacturing Solutions- TATA Motors (Aerospace Business Unit). [July 2009-Till date]

1. Currently looking after Aerospace business unit division (ABU), working on HAL & BOEING Projects.
Responsibility :
- Monitoring the maintenances activities for the aerospace shop floor.
- Installation and commissioning of m/cs as per the project layouts.
- Creating simple & suitable CNC Programs on both HMC & VMC M/Cs w.r.t their parameters.
- Designing 3-d modeling for the given ordered components. Also designing their fixtures for machining.
- Operating the machines as per the productivity and quality.

2. Worked on (EMS) Equipment manufacturing solution division handled (TASL) Tata Advanced System Ltd., Helicopter project for tooling fixture.
Responsibility :
- Worked on assembly – Hand on experience in assembling fixture units and to review all critical assembly areas after getting a report from CMM.
- Worked as a outsourcing engineer – Handled in SAP, creating PO’s and selecting right vendor for water jet m/cs & other machining activities who can deliver component on time basis at nominal cost.

3. Worked at Machine tool division(MTD) looked after SPM department , worked on projects for JCB :Boring m/c , TATA Cummins: Cylinder boring m/c, Matter Platt :DMM 100 m/c,Clucth-auto: Maus m/cs Boeing :H50+ m/cs, TASL helicopter project etc .
Responsibility :
- Worked on assembly area related to gantry assembly, mechanical assembly, electrical panel assembly, Pneumatics and hydraulics assembly etc.
- Worked on purchase or outsourcing : Underwent training in SAP, quite reliable with SAP system for purchasing materials from vendors, release contracts, PO’s etc.

4. Worked on Aerospace business unit (ABU) division in Nagpur handled project like LBW (Laser beam welding m/c) and GTAW (gas tungsten arc welding m/c for Boeing.
Responsibility :
- Worked on maintenance : Done installation and commissioning activities with NUTECH (LBW) team, IPSEN (vacuum furnace),PAR (Water jet m/c ), Heller m/c, CMM Hexagonal, STD CNC machine. Whole plant control panels for power generation. Familiar with PLC controller like Siemens, Allan Bradley and Fanuc.
- Worked as active member for commissioning of chiller unit, AHU and utility services for Nagpur plant.
Makino India Private Limited. [September 2008- July 2009]
5. Worked at Makino India Pvt. Ltd. nearly 1year in Bangalore :
- Got training in CNC Maintenance, Manufacturing, Assembly Application, Programming, CAD CAM, Fixture & tool engineering.
- Got special training at Service Dept. and Quality Dept.

BCH Electric Limited
Worked at BCH Electrics Limited nearly 6 month in Faridabad, New Delhi : [April 2008 – August 2008]
- Worked on purchase dept. for AC/DC brake, contractor, relay, limit switch etc.
- Underwent training on SAP entries like releasing PO’s and establishing healthy relationship with Vendors.

OTHER SUBJECT RELATED SKILL :
- C.N.C maintenance, machining and programming.
- Conventional machines maintenance and machining.
- Robotics programming, teaching and maintenance.
- Pneumatics and hydraulics designing, assembling and troubleshooting.
- PLC programming and troubleshooting.
- Power electronics application.
- Control system application.
- Jigs and fixtures arrangement and developing.

SOFTWARE SKILLS :
1. C.N.C software like : Mathematical Technical Software (MTS), Master CAM, NC TOP, Del-Cam
2. Designing software like : AutoCAD 2008, Solid works, PRO-E
3. Programming languages like : C, C++, UNIX, Visual Basic
4. Microcontroller simulation software like : Keil
5. Robotics simulation software like : Robo-X
6. PLC simulation software like : ABB
TRAINING ATTENDED :
1. Got special training in Quality, Service and Maintenance dept. from Makino India Pvt. Ltd.
2. Got training in Cutting Tools from Taegutech, Sandvik, Seco etc.
3. Trained in Six sigma,5 ‘S, 5’M, TPM and TQM quality related activities and ISO documentation.
4. Trained in SAP entries and special training on MS office 2007.

INDUSTRIAL VISITS :
Industrial visit attended as such : Nelco, Gabrial, Parker, Pari, Fine Arc ,Titan,Tegutech,Tata Steel etc.

PROJECT UNDERTAKEN :

1. Fan Speed Controller - Using computer Interfacing.
2. Water Level controller – Using Digital Gate.

CORE COMPETENCIES :
- Aptitude to work with numbers and ability to grasp data relationships.
- Effective communication and negotiation skills.
- Proactive and positive approach with ability to grasp concepts and procedures.
- Contribute the best for achieving team and organizational goals.
AWARDS AND CURRICULAR ACTIVITIES :
- Certified in Solid Works from Solid Works associate.
- Participated in Quality circle activity in inter college competition level.
- Winner, Intra-College Level Cricket, 2007.
- Certificate of honour from YOGA association, participated many times in district & state yoga Championship and get positioned.
- Certified in the SUPW Workshop from Kerala Samajam Model School, specialized in history, geography and English
- Certificate of appreciation from NTTF (R.D.TATA Technical Education centre) for making the idol of goddess Saraswati
- Lead captaincy as prefect in high school from std.11th to std.12th.
- Certified in National Talent Search Contest at 10th std.
- Certified in i-power (fundamental, windows, MS-office & internet) from informatics.

[Guest]

RAGAVENDRA RAO.R
E-Mail : raghumaney AT gmail.com
OBJECTIVE
To seek a job in a reputed organization in the field of Mechanical engineering and to work in an innovative & competitive environment.
Skills And Proficiencies :
- CATIA– V5R18
- PROE - Design software
- AutoCAD - Drafting software
- ANSYS
EDUCATIONAL QUALIFICATION
- Secured 71.12% marks in B.E Mechanical Engineering from Panimalar Engineering College, Chennai in year 2011
- Secured 83.08% marks in POLYTECHNIC from panimalar polytechnic college in year 2008
- Secured 64% marks in Higher Secondary from Tamil Nadu Board in year 2005.
- Secured 62.4% marks in S.S.L.C from Tamil Nadu Board in year 2003.
COLLEGE PROJECT DETAILS
Project Title : “Fabrication of Intelligent Reverse Braking System in Automobiles”
Brief Overview of Project :
The objective of our project is to fabricate a Braking system which combines the advantages of sensors and pneumatic power to enable automation of the reverse braking process. This system can detect obstacles in its path and activate the brakes, thereby avoiding accidents and improving safety.
INDUSTRIAL EXPOSURE
I had undergone the following industrial visits :
Company :
- Ashok Leyland
o Summary : Assembly of the chassis of heavy vehicles and various processes taking place in the shop floor are learnt.
- Simpson
o Summary : Production and assembly of the automobile diesel engines were studied with the better guidance of workers and engineers in the company.
- Coca Cola
o Summary : I have learnt the process of preparing the coca cola drinks and the health levels maintained with the drinks.
- Integral Coach Factory
o Summary : I have seen and gained the knowledge of making railway coaches.
SKILLS/STRENGTHS
Quick learner, Hard working, Disciplined, and open-minded
Operating system : Win 98, Win XP.
CAD tools : AutoCAD, PRO-ENGINEER & CATIA.
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge.
Date :
Place : Chennai R.Ragavendra rao