Nfotec Digital Engineering Bangalore : CFD ENGINEER

[mskavi]

Nfotec Digital Engineering Bengaluru/Bangalore : CFD ENGINEER
Website: http://www.nfotecindia.com

Keywords: Aero Engine, MTech, ANSYS CFX, NUMECA, FLUENT, STAR CD

Designation: CFD ENGINEER
Experience: 1 - 3 Years
Location: Bengaluru/Bangalore

Job Description:
The candidate should have good experience in CFD especially on the Aero Engine domain with mechanical background.

Desired Candidate Profile:
Domain Expertise: AERO ENGINE

Skills / Tools:
- ANSYS CFX
- NUMECA
- FLUENT
- STAR_CD

Company Profile:
NFOTEC Digital Engineering (India) provides full spectrum of Design Services including CADD, FEA, CFD, FSI, Residual Life Prediction and Extension, Test data analysis and Validation.

Address:
Nfotec Degital Engineering
#34, Krishna Reddy Layout, Domlur,
BANGALORE,Karnataka,India 560071

Email Address: n1@nfotecindia.com

[Guest-IJT]

Ravinder Saini

PERSONAL DETAILS :
Date of Birth : 16th Aug. 1987
Marital Status : Single
Sex : Male
Nationality : Indian

DUCATION :
Degree Year Institute / University % / CGPA
10th 2003 B.S.E.H Haryana,Bhiwani 76.16%
11th 2004 B.S.E.H Haryana,Bhiwani 71.20%
3 Year Diploma In (ELECTRICAL Engg.) 2007 Govt.PolytechnicNilokheri/S.B.T.E Chandigarh 69.06%

WORK EXPERIENCE :
Organization Duration Designation :
From To Motherson Sumi Systems Ltd. June,2007 Still working Engineer in R&D

Company Profile :
The largest manufacturer of integrated wiring harnesses in India, the Samvardhana Motherson group holds over 65% share of the Indian passenger car wiring harness market. The group manufactures wiring harnesses for the entire cross-section of the automotive industry - from passenger cars to commercial vehicles, two wheelers and three wheelers, multi utility vehicles, farm, material handling equipment and off-the-road vehicles. The group also manufactures specialised wiring harnesses for white goods, office automation, medical diagnostic equipment, electrical and electronic equipment.
Designing and developing wiring harnesses from first principle concepts on latest design software, the group provides total solutions in wiring harness manufacturing. The group has complete backward integration for manufacturing critical wiring harness components.

JOB PROFILE :
As an Engineer, I am responsible for : -

- New Wiring Harness as per layout of vehicle and the features requirement, implementation in production department, Design Change Implementation, and New Sample development.
- Making Bill of material in Oracle system (ERP), ECN Generation, Process sheet, Process flow diagrams etc.
- Knowledge of (APQP) Adavance Product Quality Planning, PPAP, FMEA etc.
- Working on CAPITAL HARNESS SYSTEMS.
- Good knowledge of E-BiZ (ERP).
- Layout, Design & development of components & sub-systems.
- Conceptualization, Spec determination of components & sub-systems.
- Continuously optimizing cost through Value Addition and Value Engineering & benchmarking.
- Coordination & follow up with vendor, related agencies for design & development activities.
- Coordinator of core team in the R&D Department in designing and developing new harness for latest automobile coming in the market.
- Part of the team involved in developing customer oriented products with high quality and efficiency in close coordination with Sumitomo Wiring Harness Systems, Japan as the technical partner.
- Continuously streamlining processes for the department to ensure smooth functioning and reduce redundancy in the system.
- Part of the team, which takes critical decision about addition of new innovative features to the existing design.
Award from Tata Motors Jamshedpur for the “Fastest response to new product development with quality & Excellence”.

TECHNICAL SKILLS :
- Industrial Software : Auto CADD,Cap-H & I H S (Wiring Harness Software),ERP, Knowledge of CATAI-V5
- Operating Systems : Windows95/98/2000/XP
- Computer Skills : MS-OFFICE , INTERNET

PROFESSIONAL ACHIEVEMENTS :
Development of WIRE HARNESS of client Hero Honda,Honda,Bajaj,Yamaha,MBK,Ducati,
Ideal Boiler, Magneti Marelli, JCB, Fiat & Tata Motors.
The model includes :
Karizma, Bajaj pulsur, Ducato, Super Bike, Tata Marcopolo, H05, Fiat Grand Punto

I hereby declare that all the information provided by me in this application is factual and correct to the best of my knowledge and belief.
Date : Signature:
Ravinder Saini

[Unregistered]

SUBHASH SHINDE
CAREER OBJECTIVE :
To obtain a full time position in a challenging environment that will provide professional working experience, challenges, responsibilities and an opportunity to learn, to develop new ideas and to contribute the best of my knowledge and efforts in a given project.

EDUCATIONAL QUALIFICATION :
1. M.Tech :
SpecializationFluids Engineering
CPI9.65
InstitutionNational Institute of Technology (NIT), Allahabad
Duration2011-2013

2. B.E, Aeronautical (AMAeSI) :
SpecializationAero-Mechanical
Percentage-63.8
InstitutionThe Aeronautical Society of India, New Delhi Duration2006-2011

School level :
3. Class-XIIth Standard
Percentage-89.5
College-Vivekananda College, Kolhapur, Maharashtra.
Duration-2005-2006

4. Class-Xth Standard :
Percentage-88.13
High schoolJawahar high school Nilpan, Nilpan, Kolhapur, Maharashtra.
Duration2003-2004

TECHNICAL SKILLS :
Designing Software : Ansys DM-14, Gambit 2.4.6, CATIA (basic)
CFD Meshing Tools : Gambit 2.4.6, Ansys Meshing (ICEM CFD)
CFD Solver : Ansys Fluent-14, Ansys CFX-14
Post-processing Tools : CFD Post, Ansys Fluent-14, Tecplot. Programming language: C, C++, MATLAB (Basic)
General Tools : MS-Office2003 -2010
Operating System : Windows

AREA OF INTEREST :
Computational Fluid Dynamics.
Fluid Mechanics and Machines.
Gas Turbine Engines.
Designing of components.

PROFESSIONAL EXPERIENCE :
Successfully carried out the Calibration of circular orifice meter with the help of Pitot-static tube
Industry : Bharat pumps and compressors, Naini, Allahabad.
Details of workThe calibration of circular orifice is carried out with the help of pitot-static tube using graphical integration technique for three different flow rate conditions.

M.TECH. THESIS :
Design and CFD Analysis of Centrifugal pump
Duration : July 2012 –June 2013 (Expected period of completion)
Brief Description : The thesis involved the different sections like designing of double volute centrifugal pump using conventional method, performance analysis of centrifugal pump using computational fluid dynamics (CFD) technique, validation of computational results with experimental results and parametric study for efficiency improvement. The steady solution approach is used.

Tools : CATIA, Ansys Fluent-14, Ansys CFX-14, CFD Post, Microsoft excel.

M. TECH. MINOR PROJECT :
Two dimensional analysis of slurry pump using CFD.
Duration : Jan 2012May 2012
Brief Description : The two dimensional analysis of centrifugal pump slurry pump is carried out using water with the help of CFD. The results obtained in the research paper ID: AICFM_TM_003 are validated. The analysis is performed using both steady and unsteady methods.
Tools : Ansys Fluent-14, Gambit 2.4.6.
M. TECH SPECIAL STUDY
Numerical Analysis of Viscous Flow over Delta-Rectangular
Duration : Aug. 2012Dec. 2012
Brief Description : The CFD analysis of delta rectangular wing is carried out using supersonic conditions and for three different mach numbers. The computationally obtained results are validated against the results mentioned in the research paper titled “ Viscous flow simulation on delta rectangular wing using Spallart-Allmaras as turbulent model”.

Tools : Ansys Fluent-14, Ansys DM, CATIA, CFD Post.

B.E. PROJECT REPORT :
Optical methods of flow visualization
Brief DescriptionMain focus on study of different optical techniques and their proper application in flow visualization

TECHNICAL PUBLICATION :
1. Name of conference : 2nd students conference on engineering and systems -2012 (SCES-2012)
Title : CFD Analysis of Viscous Flow over Delta-Rectangular Wing
Date of Presentation : April 14, 2012
Brief Description : The numerical analysis of delta rectangular wing is performed for two different angle of attacks and the obtained results are compared with wind tunnel test results performed at NASA Langley research centre. The steady state analysis is performed for basic flow behavior understanding.

2. Name of conferenceCondition monitoring and diagnostic engineering management (COMADEM) International Congress, Helsinki, June 11-13, 2013.
Title : CFD Based Condition Monitoring of Centrifugal Pump.
Paper statusAccepted for conference.
Brief description : The cavitation study of centrifugal pump is performed using numerical analysis and results are monitored in terms of head and efficiency.

TRAINNING :
Six weeks workshop training after completion of section-A.(During graduation)
Six weeks professional training after completion of section-B.(During Graduation)

MEMBERSHIP OF TECHNICAL BODIES :
Lifetime graduate member of Aeronautical Society of India (G12086).

AWARDS AND ACHIEVEMENTS :
Highest CPI during M. Tech in Fluids engineering branch as well as in Applied Mechanics department of MNNIT, Allahabad.
All India 150th rank in GATE-2011
All India topper in subjects like, “Strength of Materials, Propulsion II” and all India third topper in subjects like, “Basic Electronics and Engineering Management”. during graduation.

PARTICIPATION :
Presented a paper in oral session in SCES -2012 held at MNNIT, Allahabad.
Worked as student volunteer for the workshop titled, “Advanced functional Materials and Structures” organized by Applied Mechanics Department, MNNIT, Allahabad during July12-14, 2012.
Attended CFD symposium held at IIT Kanpur.

HOBBIES :
Listening Songs
Reading, Writing Poems and stories.
Traveling.

I hereby declare that all the information given is correct to the best of my knowledge.

Date :
Place :
(Subhash Shinde)

[Unregistered]

RESUME
ABIRAMI M S
Email :abi09ae01 AT gmail.com

Career Objective :
Seeking a challenging position in your esteemed organization that offers professional growth and opportunity to learn and enrich my competencies in my profession.

Academic Qualification :
BE(Aeronautical ) Anna University Lord Jegannath College of Engineering &Technology,Kanyakumari 2013 7.562 (CGPA)
HSC TN State Board SVM Higher Secondary School,Kootumangalam,Nagercoil,Kanayakumari 2009 70%
SSLC Matriculation SVM Matriculation Higher Secondary School,Kootumangalam,Nagercoil,Kanayakumari 2007 74%

Area of interest :
Flight Dynamics
propulsion

Software skills :
Designing software : (AUTOCAD, PRO-E) Basic, CATIA & NXNASTRON
Operating systems : Windows series
Certification & other Training details :
Completed my final year project in “DESIGN AND ANALYSIS OF AIRCRAFT WING BY USING CATIA AND NX-NASTRAN”.
Attented a inplant training in Taneja aerospace & aviation limited,Bangalore.
Presented a paper on women entrepreneurs.
Attented one day workshop on soft skills for employability held at Lord Jegannath college of Engineering & Technology, Ramanthichenputhur.
Attented one week workshop Linux system administration & open source web application development with soft skills training held at Lord Jegannath college of Engineering & Technology, Ramanthichenputhur.
Attended Two days’ workshop on Trends & development in Aeronautics & Employment oppourtunities held at Adhiyamaan college of Engineering, Hosur.
Completed course on C,C++ programming conducted by IBM.

Extra-curricular Activities :
Throw ball, Chess.
Positive Virtues :
Love to interact with people.
Possess strong problem solving & confident in success.
Lingual Proficiencies :
English, Tamil ,Malayalam

Personal Profile :
Name : Abirami.M.S
Father’s Name : Mohan dhas.A
Gender :
Nationality : Indian
Marital Status : Single
Date of Birth : 07.06.1992

Declaration :
I hereby declare that the above particulars are true and correct to the best of my knowledge.

Date : 10/6/2013,
Place : Naduvoorkarai.
Yours truly,
( Abirami .M.S)

[Unregistered]

CURRICULUM VITAE
Venkatesh Kusnur
E-mail : venky.mvj AT gmail.com

Objective :
To work as an Aeronautical Engineer in a growing organization, seek excellence & honor through hard work, Determination and Dedication in my work.

Educational Details :
Examination Board Name of Institution Year of passing Percentage :
M .Tech (Aeronautical) VTU MVJCE Bangalore. 2013 76.41
BE (Mechanical) VTU STJIT Ranebennur. 2011 64.33
Intermediate (PUC) Karnataka Pre-University P.C.Jabin college of Science Hubli. 2007 56.66
SSLC (TENTH) KSEEB Fatima High School, Hubli. 2005 82.04

Modeling Software’s : Auto-CADD, U G, Pro/E.
Analysis Software’s : Ansys(APDL), Hypermesh, ICEM CFD.
General Software’s : C- language, Tech plot, CFD Coding.
Subject of Interest : Aircraft Structures, FEM, CFD.

Technical Skills :
** Understanding of CAE process cycle and ability to perform in the same
** Good analytic and programming skills (CFD Coding)

Personal Skills :
** Good interpersonal and communication skills
** Able to meet deadlines with good quality
** Able to work in multi-cultural environment

Final Year project in B.E :
Title : Design and fabrication of three roll bending equipment.
Final Year Project in M.Tech :
Title : An analysis of sandwich composite panel under static bending load (Using FEA)

Industrial Exposure :
** At Telcon-Excavators, Belur, Dharwad, Karnataka.
** Visited Karnataka Power Wind mill plant at Gadag.

Achievements :
** Presented a paper at YANTRAPARVA a National Level Competition held at STJIT Ranibennur.
** Awarded Second Rank in University in Second Semester of M.Tech in 2012.

Personal Details :
Name : Venkatesh Kusnur
Date of Birth : 10-09-1989.
Father’s name : Raghavendra Kusnur.
Sex : Male.
Marital Status : Single.
Languages Known : English, Hindi, and Kannada.
Nationality : Indian.

Declaration :
I hereby declare that the particulars given above are true to the best of my knowledge and belief.
Place : Bangalore
(Venkatesh Kusnur)