www.ddel.net Dee Development Engineers Pvt Ltd Faridabad : Shot Blatings Painting Inspector

[mskavi]

Dee Development Engineers Pvt Ltd Faridabad : Piping fabrication Sand/Shot blatings Painting Inspector

Designation: Piping fabrication Sand/Shot blatings Painting Inspector

Job Description:
Candidates should have sufficient knowledge to check with Sand/Shot blatings (Surface Profile) and Painting (DFT and peel-off test) inspection Instruments.
Candidates should have Knowledge with Inspection reports Prepation of Sand/Shot blatings

Desired Candidate Profile:
Candidates should have adequate experience in Estimation, Supervision and Subcontractor evaluation for painting jobs on Piping fabrication spools such as Power,Oil& Gas,Boiler,Steam ,Turbine Piping

Company Profile:
DDEPL is an Engineering, Fabrication and Manufacturing Company of Piping System with global coverage incorporated in 1988 in India

Address:
Dee Development Engineers Pvt. Ltd.
Plant Address
Plot No 5327 & 6412
Prithla – Tatarpur road,
Village Tatarpur,
Distt. Palwal, 121102. Haryana.
INDIA
Phone: +91-1275-248200/ 260/ 207
Fax: +91-1275-262085
E-mail: customercare@ddel.net

Chairman and Managing Director (CMD)
Mr. K. L. Bansal
Email: cmd@ddel.net
Chief Executive Officer (CEO)
Mr. Atul Bansal
Email: ceo@ddel.net
Mr. Pankaj Aggarwal
Email: pankaj@ddel.net

Registered office & Mailing Address
1255 Sector 14
Faridabad, Haryana.
Pin Code : 1210
Email Address: manish.gera@ddel.net
Website: http://www.ddel.net

Keywords: Painting Supervisor, Painting Inspector

[Guest-IJT]

SADASHIV PATOLE
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
sadu_stp AT yahoo.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
ASNT NDT LEVEL II INSPECTOR / TECHNICIAN
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
Curriculum Vitae
PATOLE SADASHIV TANAJI
E-mail. : sadu_stp AT yahoo.com
sadu_ndt AT hotmail.com

DESIGNATION/POST. : ASNT NDT LEVEL II INSPECTOR / TECHNICIAN .
Career Summary / Objective :
7+ yrs. Of working experience in the field of plant NDT Inspection. I am looking to build my career related to my profession with committed and dedicated people, which will help me to explore myself fully and realize my potential to pursue a career in NDT and also to achieve higher standards in efficiency and excellence by exercising the best skill to attain the vision of the organization both individually and as a team player.
Educational Qualification :
HSC (Science) 2001
Computer Skill :
Basic Knowledge of Computer : Windows XP and Microsoft Office Tools, Microsoft Outlook, E-mail communication through Internet connectivity.
Technical Qualification :
NDT ASNT Level II from Institute of Testing Technology Mumbai.
- Ultrasonic Testing
- Magnetic Particle Testing
- Liquid Penetrant Testing
Experience Summary :
Having 7+ yrs. of experience in Inspection and NDT field as a Sr. NDT Inspector.
Motivated and results oriented as a Sr. NDT technician for Fabrication , Construction , Production and Shutdown Inspection of various Industrial Plants ( Oil & Gas, Refineries, Petrochemical, Power Generation, Pipeline Projects & Fertilizer) Maintenance and Service Engineering industries.
Fully conversant with the codes like ASME Sec V, ASME Sec VIII Div I, ASME Sec IX, API 510,
API 570, API 653 and ASME B 31.3. As required can refer and use these codes.
Visual and NDE Inspection of various weld joints in workshop and in the field. Fit up, edge preparation and material verification of weld components as per WPS and QP.
Worked with and assisted inspection engineers for inspection of various in-service and out of service equipments like storage tanks, pressure vessels, heat exchangers, boilers, heaters, furnaces, reactors and piping. Preparing reports and filing into systems as per inspection findings.
Ultrasonic Testing of Welding Joints, Static Equipments and Piping, Corrosion Monitoring of Exchanger Lines. Inspection of Paint, Corrosion, Thickness etc. Made Work List for Renewal. Carry out UT, MPI & DPT Test, Temperature Checking of Furnaces, and Isometric drawing Reading and also prepare new isometric drawing, Base line Thickness survey etc.
Performing NDT Techniques (UTG, MPT, DPT) on Pressure vessels, Drums, Power Boilers, Piping, Various Types of Headers, Various types of coils.
- Performing Gas Pipelines and Power Plants Erection jobs.
- Well versed with the selection and use of Visible and Fluorescent methods of LPT.
- Well versed with the selection and use of Prod method and Yoke method of MPT.
- Using UT thickness gauge to measure the thickness of service type discontinuities and carried out of Ultrasonic testing in various type of components, Follow ups be ISO, P&ID drawings.
- Checking the raw material (Plates) by using UT and also performing Flaw detect by using UT on various pipes, tubes and vessels.
Work Experience :
Presently working with SHARPTEST NDE & INSPECTION SERVICES MUMBAI as a Sr. NDT Inspector from 1st June 2010 to till date.
Responsibilities : Working as Sr. NDT Inspector for various projects / turnarounds
and on call NDE inspections. NDT & inspection of pressure vessels, heat exchangers,
storage tanks, spheres, piping and various weld joints in chemical and fertilizer industries for their various projects.
- Overseas Job Profile :
1. Client: Equate Petrochemical Company Kuwait.
Period: From 14th March to 6th May 2010
Company: STORK Al-Rashed Cooperheat Kuwait.
Nature of Work: Worked as NDT Inspector during 2010 Turnaround of EG1, EG2 & ASP plants. UT, MT, UTG & PT testing on all Equipments & Inspection of Ethane cracking furnaces, storage tanks, vessels & pipelines etc.
2. Client: Qatar Petroleum Mesaieed Refinery- Shutdown Phase 1 & 2 (2009).
Period: From 1st November to 22nd December 2009
Company: Emirates Industrial Laboratory (E.I.L) Dubai. U.A.E.
Nature of Work: Worked as a NDT Inspector during 2009 shutdown. UT, MT, PT and UTG of Pressure vessels, Boilers, Furnace, Reactors, columns, Heat exchangers, Air Coolers, Tanks and Pipelines etc.
3. Company: Chicago Bridge And Iron Company (Arabian CB&I Ltd. Saudi Arabia)
Period: 22nd September to 22nd October 2008
Nature of Work: Worked as a NDT Inspector. Carried out UT, MT, PT and RT testing of
Newly manufactured tanks & vessels. Reporting and all documentation of finished jobs.
4. Client: ADGAS-DAS ISLAND. Abu Dhabi Gas Liquefaction Company Ltd.
Period: From 1st November to 21st December 2007
Company: Emirates Industrial Laboratory (E.I.L) Dubai. U.A.E.
Nature of Work: Worked as a NDT Inspector during Train 1 and Boilers 1 and 2 overhaul
2007. UT, MT, PT and UTG testing of Tanks, vessels, Reactors and Columns, pipelines
Etc. Reporting, filing & all documentation of all plants data entry etc.
5. Client: Archirodon Construction (Overseas) Co. S. A. (Abu Dhabi)
Period: From 16th February to 24th July 2007
Company: Industrial Support Services Co. Ltd. Abu Dhabi U.A.E
Nature or Work: Worked as Sr. NDT Technician for construction of Sheikh Zayed Bridge For Abu Dhabi Island. Carried out UT, MT & PT on Cross Frame, Edge Frame, Crane Beam, Main Beam and Tower Moudle and Reporting and all documentation.
6. Client: Equate Petrochemical Company Kuwait.
Period: 14th February to 11th April 2006
Company: Heavy Engineering Industries And Ship Building Co. (HEISCO Kuwait)
Nature of Work: Worked as a NDT Technician during 2006 turnaround UT, MT, PT and
UTG carried out on Ethane Cracking Furnaces, Storage tanks, vessels and pipelines.
7. Client: Qatar Petroleum Mesaieed Refinery- Shutdown-2005
Period: 23rd March to 25th July 2005
Company: Emirates Industrial Laboratory (E.I.L) Dubai. U.A.E.
Nature of Work: Worked as a NDT Technician during Shutdown. Carried out UT, MT, PT, UTG and Vacuum Box testing of bottom plates of storage tanks, vessels, heat
Exchangers, Reactors and Piping. Prepared Isometric Drawings as in the field and
Correlated with P&ID. Reporting and documentation of all data as per client required.
Work Experience:
- Home Country (India) Job Profile:
A. Client: Enercon India Ltd.
Period: 1st November 2008 to 15th October 2009
Company: Premier Ltd. Pune
Third Party Inspection: Tata Projects Ltd.
Nature of Work: Worked as a Sr. NDT Technician. Carried out Ultrasonic testing on
Windmill casting material viz; Axle Pins, Blade Adaptors, Main Carriers and Rotor Hub
Etc. Preparing reports and documentation as per client and company requirements.
B. Client: Punj Lloyd Ltd. New Delhi India
Period: 1st November 2003 to 30th March 2004
Company: M/s. Sievert India (Pvt.) Ltd. Mumbai
Third Party Inspection: Engineers India Ltd. ( E.I.L)
Project: DVPL Spread IV-A, B 42” dia 86 Kms Pipelines and I.P and S.V station of
M/s. Gas Authority Of India Ltd.
Nature of Work: Worked as Sr. UT technician. Carried out Ultrasonic testing on weld
Joints.
C. Quality Enterprises Mumbai, under Mr. Arvind Bhide
Period: 1st November 2001 to 10th August 2008
Previously working as a Sr. NDT Technician. A non-destructive professional having experience in an inspection of Petroleum Refineries, Chemical, Heavy engineering and Fertilizer industries using various NDT methods such as UT, MT & PT.
Responsibilities: Non destructive Testing and Inspection of Pressure Vessels, Heat
Exchangers, Storage tanks, Refinery Piping, Forging, Casting, Welding Joints and Thickness Gauging of Pipelines and Vessels etc. Worked for the Following Clients;
- Reliance Industries Ltd. ( Surat, Patalganga, Nagothane)
- Bharat Petroleum Corporation Ltd, Mumbai
- Vikram Cement Ratlam Madhya Pradesh
- Oil & Natural Gas Corporation Ltd. (ONGC) Mumbai
- Wheels India Ltd. Pune
- Larsen & Toubro Ltd. Powai Mumbai
- Nuclear Power Corporation of India Ltd. (NPCIL) Kota Rajasthan & Kakrapar Gujarat
- Mazagaon Dock Ltd. Mumbai
- Tubestar Mhape Mumbai
- Schlumberger Kakinada Andhra Pradesh
- Industrial Engineers Ambernath Mumbai
- Hindalco Ltd. Belgaum
Training Courses :
Attended: STCW-‘95’ Courses in,
- Elementary First Aid
- Personal Survival Techniques
- Personal Safety And Social Responsibilities
- Fire Prevention And Fire Fighting
- Oil Tanker Familiarization
C.D.C Details: C.D.C No. M 0031546
Seafare Identification and Record Book The Republic Of The Marshall Islands
Place of Issue: Office of Maritime Administrator M.I. Reston, Virginia U.S.A
Declaration:
I herby affirm tat the Information in this document is accurate and true to the best of my knowledge.
Date: 10/ 05 / 2011
Place: Mumbai. India. Mr. Sadashiv Tanaji Patole.
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4113110
Date & Time : 10th May 2011 7:09 AM (UTC)
IP Address : 117.207.122.61
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)
Predicted Country : India

[Unregistered]

I am pankaj kumar shukla. I have compleated BE in mechanical. I am very intersted your company, please one chance work your company and best of my effort.