Chemanol Methanol Chemicals Company Saudi Arabia : Corrosion & NDT Engineer

[mskavi]

Chemanol (Methanol Chemicals Company) Saudi Arabia : Corrosion & NDT Engineer

Designation: Corrosion & NDT Engineer

Job Description:
*Review the Plant Corrosion Management System and prepare comprehensive inspection programs.
*Ensure that all inspection data is current and correct. Carry out analysis of corrosion mechanisms and failures found and maintain comprehensive inspection records.
* Assist in developing and implementing ongoing measures to identify and mitigate corrosion.
*Analyze inspection data and determine trends in order to prescribe future inspection programmes.
*Familiarisation with Risk Base software. Identify corrosion mechanisms and failure modes based on process flow diagrams, isometric drawings and operational data, with a view to the re-circuitisation of existing piping systems into corrosion circuits.
*This also includes identifying locations for inspection and the marking of corrosion monitoring locations.
*Review and audit all records, standards, procedures and database programs pertaining to the Reliability Support Group.
*Prepare shutdown inspection/repair work scopes for maintenance and participate in planning meetings.
*Review, mark-up and approval of prefabrication and construction contractor’s Inspection & Test Plans and quality related documents, including inspection data sheets etc.
*Ensure all asset and design integrity controls are being complied with, including assistance in the resolution of Contractor/Vendor concessions and technical queries.
*Application of the requirements of codes and standards covering correctness of parent material, welding consumables, dimensions, fit up and weld preparations, including any pre/post weld heat treatment and the application of PMI when required. The identification and inspection of completed welds and the examination of completed items for dimensional accuracy, against specification requirements and drawings. Interpretation of weld radiographs and the maintenance of comprehensive inspection records .
*Carry out technical audits on contractors submitting an application to be included on the company list of approved contractors.

Desired Candidate Profile:
*Degree in Mechanical or Metallurgy or equivalent. Advanced NDT methods are desirable.
* Be qualified to PCN or CSWIP Level 2 in the four basic NDT methods, namely Ultrasonics, Radiography (including Radiographic Interpretation), Magnetic Particle Inspection and Dye Penetrant Inspection.

Address:
Head Office :
Al Dammam - Al Mojael Center - Prince Mohammad Street Crossing Dahran Street
P.O.Box : 31039
Zip Code : 31471
Telephone : 038342397
038338831
038338832
Fax : 038342283

Website: http://www.chemanol.com/

[Guest]

Dear Sir,

Sub : Application for the post of QA/QC Mechanical Inspector.

With reference to your mail I wish to state that I have more than 11years of experience in this field, which also includes serving as a Mechanical Inspector for the under construction project UGAA and Flare for SAFCO and IBB Fertilizer Companies of SABIC Affiliates. I am confident that my combination of practical work experience & knowledge garnered through extensive study & experience has prepared me to mould myself for making an immediate contribution in any company that I shall serve, as I very well understand the professionalism required for long-term success in this field.

My background and professional approach to this field of activity will provide your company with a highly productive QA/QC Engineer if at all offered an opportunity to serve you.

I attach herewith my CV for your kind perusal, which shall give you an in-depth idea of my knowledge & professionalism.

Please note that I am always available on my cell phone no. +966-532703752 in case you wish to fix a convenient date & time when we may meet to further discuss.

Best Regards

Shaikh Arjed Ali

[Guest-IJT]

Name : Arun Salunkhe
Email : aarun.salunkhe AT gmail.com
Designation / Skillset : Coating inspector/corrosion surveyor
This is Arun Salunkhe, having NACE level 2 with 12+yrs in experience in the procating industry as a coating inspector/surveyor. Looking for right situation to utilize my experience.

Resume :
And details are below-
QUALIFICATION :
ACADEMIC : B. Sc. (Chemistry) From Kolhapur University, Maharastra.
TECHNICAL : NACE CIP Level II, No.12632
TRAINING : Chartex Fire proofing/Technical Service,
(Certificate of Attendance)
Certificate No : ISEAC/TSL1 – 022.
International Coatings Pte, Ltd.
Singapore, AKZO NOBEL
COMPUTER : Microsoft Word, Excel & Power Point
EMPLOYMENT RECORD : 12 years (1998 to till date)
Presently working with RAS GAS as a coating inspector & surveyor, Qatar. (From September 2010 till date through Corrosion Technology Services)
5.9 years with Akzo Nobel Coating as Sr. Technical Service executive,
(From Dec 2004 to Sept 2010).
7 years in paint Application Field
From 1998 to Dec 2004)
Period : Company & Job Title
6th September 2010 to till date : RASGAS COMPANY LTD, DOHA, QATAR
As a Corrosion surveyor/Coating Inspector.
Year Dec 2004 – 4th September 2010
: AKZO NOBEL Coatings India Pvt Ltd
As Sr. Technical Service Executive
Gujarat & Maharashtra Region
Year 2004 : Ineco, Qatar
QA/QC- For Qatar Petroleum, Offshore
Shut down Project

Year 1998 – Year 2004 : M/S JK Surface Coating Pvt Ltd.
Blasting / Painting M&R Project onshore & Offshore as a
Supervisor/Site In charge
EXPERIENCE SUMMARY
CLIENT : PROJECT TITLE
Woodside North Rankin NR2 : Re-development Project at Godrej & Boyce,
Mumbai, Maharashtra
(Epoxy Intumescents Coating Systems)
RELIANCE INDUSTRIES LIMITED : Jetty trestles - Onshore
PFP Project (Chartek 7)
CIDCO : CIDCO Exhibition Centre Project – Vashi
(Acrylic Intumescents Coating Systems)
Sunshine Builder : Sunshine Building Project – Dadar
(Acrylic Intumescents Coating Systems)
Orbit Arya Builder : Orbit Arya Building Project – Nepean Road, Mumbai
(Acrylic Intumescents Coating Systems)
IOTL – tank lining : IOTL – tank lining, Uran
(Interline 982, Interline 925)
Pratibha Pipes : Sonatrach Jetty Project- Contractor Saipem Algeria
(Structural high Performance coating application)
MUMBAI AIRPORT AUTHORITY : MIAL INTERNATIONAL Airport Project – Onshore
Steel Buildings, Interchar 963, 973 Acrylic Intumescents Coatings Systems

KOHLER India : Manufacturing Facility – Onshore Steel Buildings,
Epoxy Coatings Systems
SUZLON ENERGY : WIND TURBINES – Onshore, Tower Shop Painting
GLOBAL WIND ENERGY : WIND TURBINES – Onshore, Tower Shop Painting
ABB : Transformer Manufacturing – Training for Blasting & Paintings
In Shop Floor.
Voltamp Transformer : Transformer Manufacturing – Training for Blasting & Paintings
In Shop Floor.

Crompton Greaves : Transformer Manufacturing – Training for Blasting & Paintings
ESSAR Petroleum : BOUY (SBM) – Offshore structural painting
CAIRN ENERGY : M&R Projects for LA, GA & BA Offshore
Platforms
NICCO RESOURCESS : M&R Project- Offshore platforms Interplans
SHELL LNG PETRONET : M&R Project - Onshore Tank Terminal
JETTY expansion Project- Offshore
Structural paintings
In Shop Floor.
MAURITIUS AIRPORT AUTHORITY : SSR INTERNATIONAL Airport Tank Terminal - Onshore
Tank Linings.
Some Major Project carried out at L&T HAZIRA, Surat from 2004 to 2009
Jan 2008 to May 2009 : Mearsk Oil Qatar (MOQ) Project
Company: Larsen & Toubro
Client: Mearsk Oil Qatar
Inspection agency: BVIS
Jan 2007 to Aug 2007 : Reliance Jamnagar Export Refinery Vessels
Company: Larsen & Toubro
Client: Reliance Petroleum limited
Inspection agency: LRIS
Nov 2006 to Aug 07 : BCP-B2 Platform
Company: Larsen & Toubro
Client: Oil & Natural Gas Corporation Limited. India
Inspection agency: BVIS / GLIS
Dec 2006 to Aug 07 : Vasai East Development Project
Company: Larsen & Toubro
Client: Oil & Natural Gas Corporation Limited. India
Inspection agency: BVIS / CEIL
Feb 2006 to May 07 : 4 Well Platform Project
Company: Larsen & Toubro
Client: Oil & Natural Gas Corporation Limited. India
Inspection agency: BVIS / GLIS
Nov 2005 to Nov 06 : Pipe Replacement Project
Company: Larsen & Toubro
Client: Oil & Natural Gas Corporation Limited. India
Inspection agency: BVIS / CEIL

Aug 2004 to Dec ‘05 : 9 Well platform projects.
Company: Larsen & Toubro
Client: Oil & Natural Gas Corporation Limited. India
Inspection agency: BVIS / DNV / LRIS
And also other projects such as NQRC, MHSRP2, MNW, 6CLAMP ON, IOCL & MRPL Projects - Vessels, Reactors, Steam Drums, Heat Exchangers and Technip heat exchanger projects etc completed at L&T Hazira modular fabrication division.
Pipeline manufactured companies : PSL Ltd,
: Welspun India Ltd,
: Jindal Saw Pipelines,
: MAN Industries and
: Pratibha Pipeline & Structures pvt ltd
has successfully run the internal flow gas process qualification test and application trails for their various clients GAIL, Reliance, PDO etc as per API and ISO standards.
During the application Filed
ONGC OFFSHORE : M&R Projects for OBG Division
South, North, Neelam, Heera & Laxmi Field
Process platform
: M&R Projects for DBG Division
Sagar Kiran, Sagar Bhushan, Sagar Jyoti drilling rigs
: IMR Project for OBG,
South, North field
Through Vessel base blasting & painting M&R project.
ONGC ONSHORE : M&R Project ONGC Refinery,
Hazira, Surat.
IOCL, VADINAR : Jetty to Depot Pipeline – External Coating for Burrier Pipeline -
Onshore Project.
JOB DESCRIPTION (Responsibilities)
Coating, Painting and Lining:
Monitor ambient conditions, surface temperature, and air quality requirements
Inspection of blasting equipment and tools to be used
Inspection of type and size of blasting media
Inspection of metal surface imperfections / defects
Testing of oil or water in compressed air
Testing of water-soluble ionic contamination of blasting media
Inspection of pre-cleaning or solvent cleaning of surface
Inspection of compressed air pressure
Inspection of degree of cleanliness required
Measure surface profile of blast cleaned surface
Inspection of surface cleanliness of blast cleaned surface
Inspection of surface cleanliness soluble salt contamination on blast cleaned surface
Inspection of coating material storage conditions
Inspection of type of coating material to be used
Monitor thinning, mixing, induction time and pot life
Inspection of type of coating application equipment and tools
Monitor application method, type, and pattern
Measure wet film thickness by notch gages
Inspectionof dry film thickness of non-magnetic coatings applied to ferrous surface
Inspection of dry film thickness of non-conductive coatings applied to non-ferrous surface
Destructive measurement of dry film thickness of coatings
Monitor re-coating and final curing schedules
Testing of MEK resistance of Inorganic Zinc Rich Primers by solvent rub
Measure the adhesion of coatings applied
Testing of pull-off strength of coatings applied
Testing of discontinuity (holidays or pinholes) of nonconductive coatings and linings
Fire proofing systems:
Check fireproofing requirements, approving authority certification, fire test certificate
Inspect the surface for damage, contamination, and moisture
Ensure correct application of primer coating system
Check compatibility between primer surface (if any) and fire proofing material including dry film thickness
Check use of correct materials type
Monitor material storage, shelf life, & certification
Monitor ratio check or slump test
Monitor induction time and pot life
Monitor pre-heating or application temperature requirements for fire proofing material
Inspection of reinforcement requirements for type, position, support or fixing & insertion of reinforcement
Monitor spray / trowel application and use of solvent (approved)
Inspection of wet and dry film thickness
Inspection of surface for voids and sags
Inspection of mesh type & size, mesh position, overlap joints and rolling
Monitor re-coating / over coating intervals or periods
Inspect total dry film thickness
Ensure correct application of repair procedures
Inspect termination points, coat back requirements, final thickness, and appearance
Inspect surface cleanliness prior to application of sealer coat
Inspect sealer coat surface for voids, holidays, pinholes, & visual defects prior to application of top coat
Monitor curing time for application of sealer coat
Inspect top coating application, final thickness, and appearance
Involve in qualification of applicators & fire proofing systems

Safety, Health & Environment:
Follow local and international legal and HSE regulations
Follow project specific HSE requirements
Attend tool box briefing, safety surveillance, & safety audit
Participate in monthly management safety committee meeting
Adhere to permit to work system
Carry out job safety analysis.

Declaration:
I hereby declare that the above-mentioned information is correct to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.
Application for position as Coating inspector.
END...
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4291114
Date & Time : 23rd Jun 2011 2:38 PM (UTC)
IP Address : 178.152.180.154
Browser Info : Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; MATM)
Predicted Country : --