www.singhaniauniversity.co.in Singhania University Rajasthan : Mechanical Engineering Professor

[Rajkumargautam]

Singhania University Rajasthan Rajasthan : Professor ( Mechanical Engineering)
singhaniauniversity.co.in

Designation: Professor ( Mechanical Engineering)

Job Description:
1. Deliver quality lecture, Conduct practical training, and academic evaluation;
2. Should have adequate knowledge of the subject in order to upgrade the students;
3. Should also be able to deliver Guest Lectures, and Seminars.

Desired Candidate Profile:
Applicant should have an outstanding academic record adequately supported by commensurate teaching experience. International Qualifications, Teaching and Research Experience will be preferred along withM.Tech Good Communication Skills - Written and Spoken required & Self motivated to achieve objectives.

Address:
Singhania Associates
G107 Himalaya House 23 KG Marg
NEW DELHI,Delhi,India 110001

Email Address: lfmshr@gmail.com
Website: http://www.singhaniauniversity.co.in

[Guest-IJT]

Name : S.Subbiah
Email : subbiahkanna83 AT gmail.com
Designation / Skillset : Mechanical Engineering
I am a fresher.

Resume :
Objective
Seeking a position to utilize my skills and abilities in the core company that offers Professional growth while being resourceful, innovative and flexible.
Education Course Name of institute Year Of Passing %
B.E. Mechanical Dr.Sivanthi Aditanar College of Engineering,Tiruchendur 2011 70.65
Higher secondary Kamak Matriculation Higher Secondary School,Tuticorin. 2007 85
SSLC Kamak Matriculation Higher Secondary School,Tuticorin. 2005 84
Soft Skills
- A Beginner’s course on ‘SOLID WORKS’
- Foundation course on ‘AutoCAD’
- MS office
Personal Skills
- Self Initiator
- Quick Learner
- Positive Thinker

Extra curricular skills
- Participated in zonal level football match during school days
- Participated in intra-school cricket tournament
Area of interest
- Manufacturing Technology
- Applied hydraulics and pneumatics
Mini Project (sixth semester)
Multispeed Gear Box
Description
In automobile technology,gear box are used to transmit the engine power to the wheel through the propeller shaft. In modern vehicles manufacturers are interested in providing automatic gear changing system. But this facility is available in some specially designed vehicles so the cost of vehicle goes increasing. So we have proposed to produce a multispeed gear box. It will be of low cost and compact. It also requires very low energy for shifting the lever and it will be convenient for operators. It also doesn’t requires skilled labours to operate this type of mechanism.
Main Project (eighth semester)
CHARACTERIZATION OF PALMYRA FRUIT FIBER REINFORCED
POLYMER COMPOSITE
Description
In the present trend in order to overcome the disadvantages faced with conventional material there arises a necessity for composite materials due to their unique properties. Composites artificially produced multiphase materials having desirable combination of best properties of the constituent phases. Our project deals with natural fiber reinforced polymer composite. We use naturally occurred and cheaply available Polymer Fiber with high tensile strength as reinforced materials. And we use Polyester resin from the group of thermosetting polymer as matrix or bonding material.
Willing to relocate : Yes
Linguistic ability : English, Tamil
Hobbies : Playing Cricket, Listening songs
Declaration
I hereby declare that all the information given in this form is true to the best of my Knowledge.
Place : Yours sincerely
Date :

(S.SUBBIAH)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4187465
Date & Time : 29th May 2011 2:54 PM (UTC)
IP Address : 59.92.117.235
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country : India

[Guest]

CURRICULAM VITAE
CHETANKUMAR M. SEDANI
BE, M.TECH, PhD*(Mech.Engg), DBM, MBA (HRM), MISTE
tpojdiet AT rediffmail.com,cm_sedani AT rediffmail.com

Objectives :
- To be renowned resource person in Engineering and Technology with a mission to develop the society with high quality technocrats. To provide the continual efforts and services for developing the “Supreme-India” in Knowledge Management, Quality Management and Technology Management.
Strengths :
- Positive Attitude, Leadership, Event Management Skills , HR & Soft skills, Innovative teaching & Administrative skills, Mentor for career guidance and development, Software competencies, Trainer; Facilitator; and Auditor for ISO 9000 and TQM implementation in organization, Campus Placement of students.
Academics :
- BE in Production Engineering (1993) from Sant Gadge Baba Amravati University (MS) with First Division (71.92 %)
- M. Tech in Industrial Engineering from Nagpur University (VRCE) with First Class and Distinction (75.20%)
- Submitted PhD Thesis (Mechanical Engineering) in February 2011 to SGBAU Amravati (awaiting for the award of degree)
- DBM from AIIMS Chennai (1999) with first division (69.50%)
- Completed MBA (HRM) from YCMOU Nashik(MS) in 2011 with 63%

Experience :
- Assistant Professor in Mechanical Engineering, JDIET Yavatmal (MS) from
24/7/ 2006 to till (Regular and UGC Approved)
- Lecturer in Mechanical Engineering, JDIET Yavatmal (MS) from 17/07/2002 to 23/7/ 2006 (Regular and UGC approved)
- Lecturer in Mechanical Engineering, JSPM’s Polytechnic Pusad (MS) from 07/08/1995 to 16/07/2002 (DTE selected, Regular and approved)
- Lecturer in Production Technology, LAMIT Dhamangaon (MS) from 06/09/95 to 31/05/96 (Adhoc)
- Sales Engineer,UM Engineering Pvt. Limited Mumbai (MS) from 20/9/93 to 21/08/1994
Publications :
Books :
1. Sedani ,C. M and Kongre, U. V. (2007). Theory of Machines II, Jaypee Technocrats, Pusad (MS) India, January, (First Edition)
National and Inetrnational Journals :
1. Sedani, C. M and Deshpande N. V (2004), “Developing Environmental Management system and model building for Next Generation Manufacturing”, Journal of Pradushan Nirmulan, Dream Earth Publications, Vol. I No. I January ,pp. 43-45(ISSN :0972-8902)
2. Sedani, C.M (2005), “Environmental friendly Product Design by using Taguchi Methods”, Journal of Pradushan Nirmulan, Dream Earth Publications, Vol. II No. II, April, pp. 51-54 (ISSN :0972-8902)
3. Sedani, C. M (2009), “Accreditation of prior learning APL : An approach suggested for enhancement of Training in technical education”, The Journal of Engineering Education (87th Quarterly issue),Vol. XXII No.3,Jan-April ,pp. 47-52(ISSN:0972- 5843)
4. Sedani, C.M (2010), “ Know how of Global Recession and suggestions to overcome in context to Indian industries and Economy, The Journal of Engineering Education, October, Vol. XXIII No.2,pp 1-7, (ISSN :0972-5843)
5. Sedani ,C. M., Lakhe, R.R (2010), “ ISO 9000 & TQM factors : Review & Survey findings in Indian SMEs”, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences (ISSN:0974-3588) ,Vol. 3 issue 2, pp. 151-154
6. Sedani, C.M., Lakhe R.R (2010), “Quality practices in industries : Integrating ISO 9000, TQM and Quality Awards”, International Journal of Engineering Research and Industrial Applications, (ISSN: 0973-9424) Vol.3 No. IV, pp. 297-306
7. Sedani, C.M., Lakhe R.R (2010), “Insights on critical factors of Quality Management practices in Indian Industries” ,JM International Journal of Management Research
(ISSN : 2229-4562), Vol.1 No 1, pp. 61-69
8. Sedani, C.M., Lakhe R.R (2010),” ISO certification and Business Performance : Empirical findings of Indian SMEs”, International Journal of Business Excellence (ISSN: 1756-0047) (Accepted )
9. Sedani , C.M., Lakhe R.R (2010), “ISO 9000 and TQM impact on performance : Empirical findings of Pilot study”, Journal of Indian Management & Strategy (ISSN: 0973-9335 ) (Accepted)
Papers under Peer Review process in International Journals : 03 Papers
Reviewer for Peer reviewed Journals : 03 (International Journal of Quality and Reliability Management, Int. Journal of Management Research , and Journal of Industrial Engineering)
Papers presented and published in Proceedings (International Conferences) :
- Sedani, C M., Uplap, A. A .,Pandhare, K. S, Shirbhate , N. J.(2006), “Design of land mine detector to prevent terrorist attacks”, Proceedings of International conference ICAMTM-06, Priydarshini College of Engineering & Architecture, Nagpur (India), July, pp. 165-172
- Sedani, C. M., Kalaspurkar , S K., Uplap, A. A., Modak, J. P.(2007), “Design and fabrication of Electromagnetic Shearing Machine : A suggested approach for low cost Automation”, International Conference in Manufacturing and Technology Management (ICAMTM-2007), Parshvanath College of Engineering,Thane (India),January ,pp 591-596
- Sedani, C.M., Lakhe R.R(2009), “Critical factors to attain ISO 9000 certification : A Survey of Indian SMEs”, IEEE EXPLORER, ICETET 09 Nagpur (India), Dec.15-16, pp. 765-774, (ISBN: 978-0-7695-3884- 6),
(Available on line) http http://://doi.ieeecomputersociety.or...ICETET.2009.65
- Sedani C.M., Lakhe R.R (2010), “Critical factors of Quality Management practices in Indian manufacturing Industries :A review of Literature”, Business-Vision 2020 Bangalore (India) ,April15-16,pp.196-202,
(ISBN :978-81-8488-937-6), http://www.himpub.com
- Sedani C.M., Lakhe, R.R.,(2010), “Implications of ISO 9000 QMS & TQM on Performance measure of manufacturing industries in India : Analysis of Pilot Study,14 ICIT 2010,Scranton University PA(USA),Apr 5-7,pp. 67-68, (ISBN: 962-86107-9-1-14), http://www.hk5sa.com/icit
Papers Presented and Published in National conference Proceedings:
1. Sedani, C M (1997) “Total Quality Management in Technical Education” ,ISTE/AICTE Sponsored Two Days National Seminar on TQM in Technical Education , Tatyasaheb Kore Institute of Engg.& Technology Warnanagar Dist-Kolhapur (MS) India , 27 -28 February
2. Sedani, C M., Kewate, S. R. (2003),“Practical approach to FMS”, Two days National Conference on Automation in Engineering (NCOAIM) at GH Raisoni College of Engineering, Nagpur (MS) , January 10-11
3. Sedani C. M., Shirbhate , N J., Wankhade, A M (2004) , “JIT/TQC : Integrating Product Design for Shop floor effectiveness” , Two Days National conference on Advances in Mechanical Engineering(AIME 04) , JDIET Yavatmal(MS) India , 23-24 April
4. Sedani, C M., Tugnayat , R M., Chaudhary, D N., Gandhewar, V R (2005), “CFDM for future prospects of Technical education in the era of globalization” , IX state level Maharashtra and Goa convention of ISTE and National conference, February 4-5
5. Sedani, C M., Lakhe, R R (2008), “Perspectives on adopting approaches for quality management practices in Industries: A review”, All India Seminar on Organizational Excellence for Global Competitiveness( Quality Edge 2008), Institution of Engineers Nagpur local center and YCCE Nagpur , January 19-20
6. Sedani, C.M., Lakhe, R.R. (2008), “Adoption of two Business level strategic typologies and aspects for mapping excellence of Industries” , All India Seminar on Mapping Excellence towards Global Competitiveness(Map-Excel 2008), Institution of Engineers( Mumbai) and YCCE Nagpur ( India), October 16-17
7. Sedani C.M., Shirbhate, N.J., Wankhade, A.M., (2010),“Customized Tool Development for Automated Generation of Contour Map from Surveyed Level data, NCPE -2010, SGGS Institute of Engineering & Technology, Nanded (MS), December 3-4
ISTE sponsored STTP’s attended/organized/coordinated:
1. Attended ISTE/AICTE Sponsored, Two weeks Short term training Program(STTP)on “Industrial Productivity Improvement through innovative Techniques” organized by Department of Mechanical Engineering Regional Institute of Technology ,Jamshedpur (Jarkhand), 17-30 June 2002
2. Attended One week ISTE/AICTE sponsored STTP “Design for manufacturing and Assembly” at SSGMCE Shegaon (MS), 25-30 October, 2005
3. Attended Two week ISTE/AICTE Sponsored Short term training Program (STTP) “Future Energy” organized by Government Polytechnic Yavatmal, 6-17 December, 2004.
4. Organized & Attended One week ISTE/AICTE sponsored STTP “Advance Modeling Techniques” under ISTE staff chapter with Department of Mechanical Engineering, JDIET ,24-28April, 2006
5. Organized & Attended One week ISTE/AICTE sponsored STTP “MATLAB & IT’S APPLICATION” under ISTE staff chapter with Department of Electronics & Telecommunication Engineering, JDIET, 4-9 October, 2006.
6. Organized & attended One week ISTE/AICTE sponsored STTP as Coordinator “Achieving Quality Excellence in Technical Education” under ISTE staff chapter with Department of Mechanical Engineering JDIET, 4-8 December, 2006.
7. Organized & Attended One week ISTE/AICTE sponsored STTP “Web Authoring Tools” organized by ISTE Chapter & Dept. of CSE and IT, JDIET Yavatmal from 12-17 April, 2007
8. Organized & Attended One week ISTE/AICTE sponsored STTP “Recent trends in Networking” organized by ISTE Chapter & Dept. of CSE and IT, JDIET Yavatmal , 09-13 June 2008
9. Organized & Attended One week ISTE/AICTE sponsored STTP “Recent trends in artificial Intelligence” organized by Dept. of Electronics and Telecommunication Engineering ,JDIET Yavatmal , 10-14 November 2008
10. Organized & Attended One week ISTE/AICTE sponsored STTP on “Flexible Manufacturing System” organized by ISTE Chapter & Mechanical Engineering Department ,JDIET Yavatmal , 1-5 June , 2009
11. Organized& attended ISTE/AICTE approved One week STTP “VLSI and Embedded Systems” Organized by ISTE Chapter and Department and Electronics and Telecommunication Engineering, JDIET Yavatmal ,5-9 October 2009

Events/ workshop organized for ISTE Student Chapter (As a Faculty Advisor):
(More than 65 events from 2003 to 2010)
Award Received: Best ISTE Student Chapter for 2007 from MS and Goa Section
National Conference/workshop organized/ attended/ participated:
(Participated in 14 National Conferences, organizes 07 conferences/workshops)
Expert Lectures Delivered:
- “CAD/CAM and Manufacturing talk” at One week ISTE sponsored STTP on “Advance modeling Techniques” organized by JDIET Yavatmal, 24-28 April,2006
- “Developing strategic vision” at One week STTP on AQE in Technical Education organized by Dept. of Mechanical Engineering, JDIET Yavatmal ,December 8,2008
- “Technical Report writing “for the students of final year IT ,January 21, 2007
- “Development and perspectives of Entrepreneurship in India” at Three Days ISTE Sponsored Entrepreneurship Awareness camp organized by ISTE Chapter and JDIET Yavatmal from 27- 29 December, 2008.
- “Entrepreneurship and Students” at one day workshop organized by NSS Unit BNCOE ,Pusad(MS) on 28/01/2010
Consultancies:
Implementation of ISO 9000 QMS and ISO 18001 at TPS Bhusawal, MSEDC Ltd., Aurangabad, Latur, Parbhani, Nanded, Yavatmal. Audit for ISO 9000, MAHAGENCO Ltd. Buldhana, Aurangabad (Under Shreyas Quality management System Nagpur)
Presently:

- Handling the portfolio of “Training and Placement Officer” from 2007 to till.
- Arranged more than 50 campus placement drives for the students, more than 350 students are well placed in various MNCs from JDIET Yavatmal.
- Handling the portfolio of ISTE Staff Secretary and Faculty Advisor, since 2003.
- Arranging the Personality development/ Campus Recruitment Training programmes for the students of JDIET Yavatmal
- Submitting the PhD Thesis “A Model for adopting good quality practices in Industries and assessing its impact on manufacturing practices and performance” under the supervision of Dr.Ramesh R. Lakhe (Director, SQMS Nagpur)
- Submitted the project “Psychometric testing and its implications on HRM and organizational competence: A study” for the award of MBA (HRM) from YCMOU Nashik. Previously secured aggregate 62% in first and second year examination.
- In past, also handled the portfolio of “Workshop- Superintendent” at JDIET Yavatmal from 2002 to 2006.

[Guest]

Singhania University

There are 100s of better universities in India to choose from and i don't understand why one should choose a university like Singhania University with inadequate infrastructure. Even though this university may not be fake just Google around and you will find that they have had history of taking students for a ride including having their Vice Chancellor arrested for fraud and malpractice. They have all accomplished this in such a short time. Voila!

As far as their praise mails are concerned it is from either struck students trying to salvage some pride or from university posting on the internet on their behalf. One word of advice though ....STAY AWAY..........

[Guest]

The Director,
Singhania University,
Pachari Bari,
Jhunjhunu.
I am Aircraft Maintenance Engineer Mechanical, DGCA qualified Licence Paper-1 & 2, presently working as technician at Banasthali Vidhyapeeth Gliding & Flying unit, Newai, Rajasthans Tonk district. I am working since Aug 2012 uptill date. My resume is enclosed with this cover letter. I will be highly grateful to University if I am given a chance to provide my skill to the student of your college.
Thanks,
Akshay Arya
(vi) aksh.chan AT rediffmail.com
CURRICULUM VIATE :
A-(1)-Technical skill & Responsibilities, since Aug. 11- Cessna 152 and 172 :-
*Performing daily of basic care for the aircraft & customers as required.
i.e. refueling; moving the aircraft; cleaning the aircraft; servicing the
lavatory, loading and unloading baggage & meeting/ dispatching the aircraft.
*Performing daily of custodial maintenance duties at the hanger as required.
*Daily completion of routine deliveries and stocking of the aircraft.
*Working independently in a repetitive & cooperatively in a team
environment.
*Shift duties are depending on workload hours & days.
*Able to corporate custodial operation related equipment & use applicable
chemicals; supplies; hand & power tools.
*Having ability to read write & speak English & understanding of strictly
enforced safety procedure & follow them.
*Always remain ready to understand written & verbal communications.
*Current driving license & unblemished driving record test more than 3-years.
(2)-During the full time AME- mechanical diploma course :
*The diploma approved by DGCA in LA; CP&CT. as per ICAO type-II on
continental E-185 Piston Engine & Allison C-20J Jet Engine w.e.f.
July 2007 to Jul.-2010 i.e. 2 years & 6 month from HIA; Bhopal (M.P.);
*OJT since 19th Aug.-10 to 19th Oct.-10 as a part of AME Diploma Training
on CHETAK (VT-EGP) and of Bell-206-B-III Jet Ranger Allison .
B- Qualification :-
*Educational-Academic :-(i) 10th (High School) in 2005 with 50.67% and
12th Senior Higher Secondary with Science Maths stream in the year 2007,
with 50.63%.
*Educational- Technical :-
( I )AME Diploma in Mechanical approved by DGCA in 2010, as per standard minimum 70% qualifying marks out of 100 marks.
( ii )OJT from Dhillan Aviation Pvt. Limited, Jagdalpur Airport (Hilly airport).
(iii) License Paper- 1 and License Paper- 2
(iv) Knowledge of computer Jet king being used in Aviation field.
( v )Knowledge of Jet Turbine & Piston Engine.
(vi) Knowledge of Aircraft Electricity; Electronics & Aircraft instruments.