www.armaco.in Chemical Process Systems Pvt Ltd Mumbai : Piping Draughtsman

[mskavi]

Armaco Chemical Process Systems Pvt. Ltd. Mumbai : Equipment,Piping Isometrics Draughtsman

Designation: Equipment,Piping Isometrics Draughtsman

Job Description:
Draftsmen on 3 month and 6 month contract basis.
Equipment Layout ,Piping Layout, plot plan, Piping Isometrics and MTO ,Piping Support Layout ,Process & Instrumentation Diagram ,Fabrication Drawing of Equipments, Factory Plan.

Desired Candidate Profile:
Minimum 2 to 5 yrs. in drafting for Petrochemical refinary, Fertiliser plant, Chemical plant etc.Hands-on proficiency with AutoCAD . Knowledge of rules and symbols- piping standards, drafting standards, ASME etc.

Address:
Armaco Chemical Process Systems Pvt Ltd
A/6 Venus, Navroji Vakil Street,
Nana Chawk,
Grant Road (West)
MUMBAI,Maharashtra,India

Email Address: liya.kuruvilla@armaco.in
Website: http://www.armaco.in

[Guest]

CURRICULUM VITAE
Chitroda Mayur .g.
Piping Engg. (B. E. in Mechanical)
Mayur_chitroda AT yahoo.co.in
Mob:08010505559/09824111143
Career Objective
I am looking for an entry level position in Piping engineering (Piping Design & Detail engg.) with an excellent ability to work as a team to achieve company objectives.
BRIEF OVERVIEW :
- B.E. (Mechanical Engineering) with 1st class from Hemchandracharya North Gujarat University, Patan.
- I have 1yr 2 month total exp.of maintenance & site work & design work.
- 6 month training & Certified Diploma Course in Piping Design & Detailed Engineering with PDS software from SmartBrains Institute Of Engineering Design & Research.
- Very active and energetic individual possessing good communication skills, grasping power, and leadership qualities.
- Acquired knowledge and understanding of subjects like; PDS,PDMS,AUTO-CAD.
- Abilities in handling multiple priorities, with a bias for action and a genuine interest in personal and professional development.
- Extremely motivated and career-oriented professional capable to work in a professional environment with a positive attitude

Key Skills :
Knowledge of Piping & Detail engineering.
- Study Plot Plan & Equipment Layout Drawings.
- Preparing Isometric and Piping GA.
- Preparing piping layout.
- 2D and 3D modeling.
- Material Take Off (M.T.O).
- Study Nozzle Orientation Drawing.
- Codes and Standards (ASME/ANSI etc.).
- Study P&ID.
- Fittings, Valves and Instruments.
- Basic Knowledge in Pipe Thickness & Pressure Drop Calculations.
- Rack Piping, Layout Piping & Yard Piping.
- Basic idea in Supports & support Type.
- Pump Piping,Exchanger Piping,Column Piping and Tank Farming.
Software knowledge:-
PDS(Plant Design System):
Equipment Modeling- Equipment Modeling Interface, Orientation Tee, Equipment Palettes, Creating Equipments from 3-D Primitives, Nozzle Placement & manipulation, Understanding Parametrics.
(conti.on next page)
Piping Modeling- Routing Piping Centerlines, Placing Piping & Piping Components, Piping Assemblies, Revise Components & Analyze Data Commands, 3-d modeling of piping based upon P&Ids, Equipment G.A & Layout & mechanical data Sheet.

PDMS(Plan Design Management System-AVEVA:
- Review of P&I Diagrams.
- Designing Equipments and pipe routing in Plant Design Management System (PDMS).
- Plotting the plot plan.
- Modification of designed Isometrics as per final P&I Diagram
- Extracting 2D drawings from 3D Model
Auto Cad
Micro station
Ms-office,Os-like win-xp,vista,etc.
Academia :
School Level Qualifications
Class Name of School Board Percentage Year of Passing
10th Std. Swami vivekanand vinay mandir,junagadh. GSEB 62.29%(withtechnical)
2003
12th Std. Swami vivekanand vinay mandir,junagadh. GHSEB 52.15% 2005
B.E. In Mechanical engg.Government Engineering College, Modasa (Gujarat)
Year/Semester
Percentage University Aggregate
1st Year 53.75% Hemchandracharya North Gujarat University, Patan.
( finished in june 2009 ) 58.08%
3rd Semester 54.53%
4th Semester 57.20%
5th Semester 58.75%
6th Semester 59.87%
7th Semester 61.70%
8th Semester 60.80%

Computer Proficiency :
- Knowledge of: Ms-Office, C,C++ , Internet, Bussiness systems, Internet & Web Desing, IT Tools & Applications.

Experience :
- Worked with Amoli Organics Pvt.Ltd. vapi unit as a Maintenance engg. (Shift engg.) From july 2009 to Sptember 2009.
- USFDA approved, API’s manufacturing company.
- Working with Smart brains Engineers & Technologist pvt.ltd. Ghaziabad as a piping design engg.from March 2010 to till the date.
- Profile of Smart brains Engineers & Technologist pvt.ltd. Ghaziabad.its one time of design project hiring company.which designing on PDS,PDMS.and Autocad.
Preparation of piping Isometric Drawing, 3D modeling and layout of piping & equipment modeling,M.T.O. preparation,eparation of P&ID.

Extra Activities :-
- I Cleared ‘CCC’ & “O-level” examination( which Conducted by Doeacc Society, An Autonomous Scientific Society Of Department of Information Technology Ministry of Communications and Information Technology.Govt.of India, New Delhi.
- I gave seminar on “Welding Technology & their Defects “,in 6th Semester.
- I gave seminar on “Wind energy & Wind turbine generator(WTG)” in 7th semester.
- I cleared examination of Disaster Management with “ A “ grad.
Industrial Training :-
- I Done my industrial traning in “INDIAN RAYON : A unit of Aditya Birla Nuvo Ltd.-Veraval(Gujarat)”.
- I Submitted industrial traning-Project report On ‘World class Manufacturing system of Japanese Technology(WCM) ‘- in Indian Rayon : A unit of Aditya Birla Nuvo Ltd. Veraval (Gujarat)’.
Passport No:- H0233100
Date of issue:- 22/08/2008 Date of expiry:-21/08/2018

Personal Information
Chitroda Mayur.g.
42-shamvad vihar, Ahinsa Khand – II,
plot no-3, Indirapuram,
Ghaziabad-201010 Contact Information:
mayur_chitroda AT yahoo.co.in
Mayurchitroda.engg AT gmail.com
Mo.:-+91 8010505559/09824111143
Ph :- (0285) 2650325
Parmenant Address:-
“Chamunda Nivas”,Opp.Govt.Godawn
,Nr.chamunda flour mill,
Ganadhigram,
Junagadh-362001(Gujarat)
Hobbies: Internet surfing, reading,Listening Music,Bike riding.

Father’s Name Mr.Girdharbhai.D.Chitroda
Father’s occupation Auditor cum accountant
Date Of Birth 28th December 1988.
Gender Male
Marital Status Single
Nationality Indian
Language English, Hindi, Gujarati

Thanking you.
Place: indrapuram(ghaziabad) Yours faithfully
Date: / /2010. (Mayur chitroda)

[irsh_1985@yahoo.com]

Respected Sir,
I am Mohammed Irshad Ali, An Indian citizen working in Jordan as Industrial draftsman with Organization Named “Mechanical Engineering & Contractors”, I am working here from Past 1 year, and I am applying this job for the post of Mechanical/Piping AutoCAD Draftsman. I own 3 years of Professional experience in this Industrial field. If you have vacancy regarding my job please inform me. Because on 25th Sep 2010 I will be back to India so I don’t want to waste my time want to join soon a new organization in gulf. I have attached My CV & My Passport copy with this email. Please check the attach file, I am waiting for positive reply...

Thanking you
Yours faithfully,
Mohammed Irshad Ali
Curriculum vitae

Mohammed Irshad Ali Namira apartment, Flat no.202,
2nd floor, New colony Ambernath (w)
Dist -Thane (Mumbai)
State- Maharashtra, country-India
Pin code- 421505
Email Id : - irsh_1985 AT yahoo.com

Objective : To provide the best of service to my full potential wherein being continuously as part of a team that dynamically works towards of the organization, the job being in accordance with my 3years of Professional experience and achieve excellence thereof..
Resume Overview :

- Over 3 yrs. of experience in Mechanical /Piping/ Steel structure/AutoCAD draughtsman.
- Preparing Steel structure, HVAC duct, and Piping drawings.
- Preparing Storage tank, Heat exchangers, and Pressure vessels drawings.
- Preparation of General assembly drawings.
- Preparation of Detail & Section drawings
- Preparation of Isometric drawings.
- Preparation of Bill of Material.
- Responsible for preparing all the necessary shop drawings, Sketches.
- Preparation of As-built drawings as per the site condition.
- Check visual dimension.
- Working drawings from rough detailed sketches and notes for Engineering or manufacturing purposes.
Educational Qualifications :
- Appeared T.Y.B.COM.(Mumbai University)
- Diploma in Mechanical Piping Drafting & Designing (1year).
Additional Qualifications :
INSTITUTE COURSE
Industrial Institute of Thane, (Mumbai) Mechanical draughtsman
Industrial Institute of Thane, (Mumbai) Piping draughtsman
Industrial Institute of Thane, (Mumbai) AutoCAD 2007
NIIT Ambernath Branch ,Thane (Mumbai) Programming(oops)
IBS Private institute, Ambernath ,Thane (Mumbai) Basic Microsoft Office &Internet


EXPERIENCE IN ABROAD :
COMPANY Period
Mechanical Engineering & Contractors, Jordan (Amman) Aug 2009 to Aug 2010

EXPERIENCE IN INDIA
COMPANY Period
Hi-tech Chemo Equip Ltd ,Ambernath (E) Anandnagar,Thane 10/08/2007 to 12/08/2009


PERSONAL INFORMATION :

Father Name : Mr. Valil Ali
Date of Birth : 18/05/1985

Gender : Male

Marital Status : Single

Passport No : F1587748
Date of Issue : 07/02/2005

Date of Expiry : 01/02/2015

Languages Known : English, Hindi, Marathi, Malayalam, Arabic.

About me : I am hardworking person with innovative mind, having a good grasping power with sharp memory, good in mathematics & have good potential to do hard work,and eager to learn more in Mechanical/Piping engineering..

DECLARATION
I hereby declare that the records, which I stated above, are true and I would be able to submit the records with in your concerned interest. I am keenly interested in joining good organization and I am looking forward to positive replies.


Date Irshad Ali

[Guest]

Total more than 6 Years experience in CHEMICAL ,PETRO CHEMICAL &OIL GAS REFINERY & Connected utility piping job.

[Guest]

ANANT HANUMANT OMBLE
anantomble AT gmail.com
anantomble AT ymail.com

OBJECTIVE

- To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career.
TECHNICAL SKILL : -
- Understanding P&ID Drawing and incorporating it in piping drawing.
- Piping Study & Preparation of Piping Layout.
- Familiar with Plot Plan, codes & standards.
- Plotting of GA Drawing.
- Designing and drafting of Isometric Drawing.
- Modeling of Piping & Equipment, Iso extraction, Preparing drawings using Auto Cad -04,0
SUMMARY : -

- Around 3 years working experience in Designing and drafting drawings in piping field.

PIPING

FROM NOVEMBER -2010 TO TILL DATE
1)Company : GHARDA CHEMICALS LIMITED (DOMBIVALI)
Designation : PIPING DESIGNER

Job Profile : - Plot plan
- Equipment layout & section
- Piping layout & section
- Nozzle Orientation
- Isometric-Pipe/IBR/Jacketed
- Bill of Material

PROJECTS HANDLED : -

1) Modification in Gharda Dombivali Master plan
2) Equipment Layout of plant iv
3) Layout of Synthopharma
4) PEK(POLY EITHER KEYTONE) GIL
a) P&ID Sketching for as Build plant of GIL (GHARD)
b) ISO Cheking as Senior Draughtman For GIL
2) WORKED WITH SAI TECH ASSOCIATION (THANE) FROM AUGAST 2008 TO NOVEMBER 2010.
Designation :Piping Engineer/Draughtman.

OIL & NATURAL GAS CORPORATION INDIA

Plant : ONGC B-22 field Development Project
Unit : IUG system for B-22, B-12 Well Platform
Job Profile : Piping layout using Auto Cad- 04,07.
Preparing of isometrics drawings with MTO based on piping layout.

Plant : CPF Gandhar, Bharuch.
Unit : Steam heater in CSU Train 15
Job Profile : Preparing of isometrics drawings with MTO based on piping layout.
Incorporating Corrections & Modification. Preparation of Support layout with details


SUBODH ENGINEERING PVT. LTD.

Job Profile : Preparing of Detail Assembly drawings with MTO of Vessels & Filters.
Incorporating Corrections & Modification

SYSCON ENGINEERS

Job Profile : Preparing of GA drawings using Auto Cad- 04,07.
Preparing of GA drawings of Heat Exchangers, Pressure Vessels, Columns,
Tanks, etc. with MTO.
Incorporating Corrections & Modification.
2)Worked with SUPERCHULLERS PVT LTD,Navi Mumbai.as Design Engineer & QC Enginner,From JUNE 2008 TO AUGAST 2008
The responsibilities assigned are : -
- Carryout test of finish product or prototype as infrastructure by department head of design.
- Maintain record of the results of performance of the finished products.
- Assist in analyzing non-conformity arising in workshop whenever required.
- Make prototype product for new development product.
- Complete the drawing on board as well as on AutoCAD 2006. given by design head.
- Develop existing product as per requirements in co-ordination with design head.
- To help in implementing ISO 9001 :2000 in our company.
EDUCATION
- Appeared for part time BE in INSTITUTE OF MECHANICAL ENGINEERING
- Succesfully done post graduation diploma in “PIPING ENGINEERING” from Suvidya Institute of Technology
- Passed Diploma in Mechanical Engineering from M.H.Saboo Siddik
Polytechnic.(M.S.B.T.E) Mumbai in 2009.
- Passed S.S.C from Mumbai Board in 2003.
- Passed H.S.C.From Mumbai Board in 2005

ADDITIONAL QUALIFICATION
- Succesfully done “AUTOCAD” from Government college of Polytechnic Bandra.
- Familiar with Computer Basic

[Guest]

Curriculum Vitae
Tushar Balkrishan Kerkar.
E-mail : t.kerkar AT yahoo.co.in

Objectives :
Keenly interested in innovative, result oriented projects and seeking for challenging opportunity and position myself, so as to utilize my Technical knowledge to accomplish the goal of Piping industry.

Educational Qualification :
- Passed S.S.C in March 2003 with 56.40%.
- Passed H.S.C in March 2005 with 55%.
- Passed T.Y.B com in year 2008.
- Diploma in Mechanical Draughtsman from Gupte Academy, Dadar with 1st class.
- Diploma in Piping Draughtsman from Aakar Institute, Mulund with 1st class.

Technical Skills :
Software’s : 1. AutoCAD 2004, 2008 & 2009.
2. Familiar with MS Office 2007.
3. PDMS 11.6
Mail Server : OUTLOOK EXPRESS 6.0.
Certifications :
1. AutoCAD 2004.
2. Passed Intermediate drawing certification from Mumbai.
Total experience : 6 Years
Experience Details :
1. Six months experience in M/S SHARPLINE ENGINEERING SERVICES. (Planning Piping Designing & Detail Engineering) Mumbai as a Trainee piping draughtsman from March 2006 to August 2006.
- Preparing the piping layout with the help of design drawings.
- Preparation of P & I diagram.

2. THERMAL TECHNO FRIENDS PVT. LTD. (Consulting Engineers for Thermic Fluid, Steam, Hot Water & Hot Air System) as a Sr.Piping draughtsman from September 2006 to March 2011.
- Project study & Finding scope of work.
- Study the contract drawings and finding the queries.
- Preparing the RFI’s (Request for Information) OR Queries regarding the contract drawings and sent it to client.
- Preparing the Piping Equipment layout with the help of contract drawings.
- Preparing Isometric views.
- Preparing the fabrication drawings.
(Pressure Vessel :- Heat Exchanger, Steam Generator, Expansion Tank, Deaerator tank,
Air Receiver, Reactor Tank)
- Preparing the fabrication drawings of Pipe Bridge, Tank Structures etc.
- Making P & I Diagram.
- Flue gas ducting layout.
- Fabrication drawing of Flue gas CHIMNEY.
Project Experience :
1. Textiles Industries :
a) Alock Textiles
b) Indian Lather
c) Mahabir Textiles
d) Kagzi Textiles
e) Mahesh Textiles
2. Chemical Industries :
a) Garda Chemicals
b) Croda Chemicals
c) Melog Chemicals
d) Lasons Chemicals
e) Lona Chemicals
f) Cipla Pharmacy
3. Refineries :
a) Reliance (Mhape)
b) Das Offshore
4. Edible Oil Industries :
a) Liberty Oil Mills
b) Ruchi Soya
3. Currently working with BHABA AUTOMIC RESEARCH CENTER (B.A.R.C.) Govt. of India
as a Sr. Piping draughtsman from April 2011 to till date.
- Preparing the Equipment layout with the help of contract drawings.
- Preparing the fabrication drawings.
(Filter frame for ventilation, Supply and Exhaust filter room.)
- Ducting layout for ventilation.
- Making P & I Diagram.
- Preparing the Piping Equipment layout with the help of contract drawing.

[Guest]

CURRICULUM VITAE
Manisha Abhinay Uge

Email ID : manishauge AT gmail.com
Objective

To pursue the knowledge which will strengthen and sharpen my technical skill and make me competent to face the global challenge in the industry and become an asset to the organization.
Profile
- Always eager to learn new concepts and principles.
- Dedication towards work, Creative.
- Hard working, Confident, Self motivated.
- Confident in identifying and solving problems.
Professional Summary
- Completed Post graduation diploma in Process Engineering from Suvidya Institue of technology.
- A Chemical Engineering professional with 1 years of extensive experience in Project of design and assesment of CETP, Worked on membrane pilot plant, Development of PFD, Mass Balance & Energy balance calculation.
Technical Skills
- Knowledge of Mass balance, Heat balance, Energy balance Calculation, Pump selection & sizing.
- Knowledge of Development of BFD, PFD, P & ID, Line sizing & pressure drop calculation, Valve selection & sizing, Saftey valve sizing, Reactor sizing.
- Knowledge of Heat Exchanger Design, Distillation column Design.
Computer Skills
- Packages : Excel Sheet, Powerpoint presentation, MS Word
- Softwares : CHEMCAD, Matlab software
Educational Qualification
Course University / Board Year of Passing Percentage
Post-Graduation Diploma in Process Engineering
Suvidya Institute of Technology, Mumbai. May 2012
77.40%
Bachelor of Technology (Chemical Engineering)
Laxminarayan Institute of Technology
(Nagpur university) June 2010 65.35%
H.S.S.C Pune Board March 2006 74.64%
S.S.C Pune Board March 2004 68.80%
Achievements
- Secured 1st position in Poster Presentation on Disaater Management at
AZeotropy 2k10 in IIT Bombay.
- Secured 3rd position in Quiz competition held at AZeotropy 2k10 in IIT Bombay.
- Secured 3rd prize in Industrial design problem (IDP Petrocrat) designed by ONGC in IIT KHARAGPUR.
- Participated in Paper presentation (Simulation and control of production of polystyrene plant using Aspen polymer plus software) competition held at AZeotropy 2k10 in IIT Bombay.
- Participated in Design competition (Extraction column design) held at AZeotropy 2k10 in IIT Bombay.
- Participated in ‘AZEOTROPY 09’ in ‘CONVECTION’ organized by Chemical Engineering Association IIT BOMBAY.
- Presented Paper in L.I.T. on ‘Charcoal as Adsorbent’.
Experience
Project Techno-economic assessment of wastewater management for existing disposal system vis -a- vis advanced treatment system for recycle/reuse
Role Project Assistant
Organization National Environmental Engineering Research Institute (NEERI), Nagpur
Team Size 5
Tenure Oct 2010 to Sep 2011
Description :
This project is about to achieve minimum discharge limits of effluent from TATA MOTORS PUNE.
Responsibilities :
- Visit to the site of problem, getting acquainted with the problem & site.
- Preparation of Process flow Diagram.
- Planning of sampling, analysis, preparation of reports.
- Implementation of solution at Lab level through various research and development process.
- Demonstration of Pilot Level from lab level at site.
Project Technical Evaluation of CETP at Gujarat Eco-Textile Park for its Adequacy and Efficacy Assessment.
Role Project Assistant
Organization National Environmental Engineering Research Institute (NEERI), Nagpur
Team Size 5
Tenure Oct 2010 to Sep 2011
Description :
The SFC Environmental Technologies Pvt Ltd, (SFCET) Mumbai initiated the activities to mitigate the pollution problems arising from the small scale dying and printing units at GETP, and proposed to implement CETP for the purpose.
Responsibilities :
- Preparation of process flow diagram (PFD).
- Study of unit operations and process (UO&P).
- Design of CETP after considering flow and characteristics.
- Quantification of hourly wastewater flow variation received at the CETP.
- Assessment of pre-treatment facilities.
- Assessment of design parameters of unit operations and processes (UP&O) of CETP.
- Adequacy and efficacy assessment of existing CETP through monitoring based on cyclic period of operation.
- Delineation of suitable measures for improvement in the performance of the existing CETP.
Curricular Project Experience
- Done implant training in National Chemical Laboratory Pune for 2 month. Worked on the Hydrogen permeable membrane.
- Prepared hydrogen permeable copper membrane in college laboratory.
Declaration
I hereby declare that all the foregoing information is true to the best of my knowledge and if any mispresentation by me in this application will render me liable for dismissal from the service at any time.
Date : ___________
Place : Mumbai