www.kpitcummins.com KPIT Cummins Infosystems Ltd Pune : Electronics Telecommunication Trainee

[mskavi]

KPIT Cummins Pune : Electronics Telecommunication Trainee
Website : http://www.kpitcummins.com

Designation : Trainee
Job Description
We are looking for BE-E&TC fresher candidates who would work in embeded technology

Desired Profile
We are looking for BE-E&TC fresher candidates who would work in embeded technology
1. BE-Electronics and telecommunication background is a must
2. Excellent communication and interpersonal skills
3. Knowledge of C, C++ would be added advantage
Experience 0 - 1 Years

Contact
KPIT Cummins Infosystems Ltd
KPIT Cummins Infosystems Ltd, Plot No.35 & 36,
Rajiv Gandhi Infotech Park, Hinjewadi,
PUNE,Maharashtra,India 411057
Email : raghesh.nair@kpitcummins.com
Telephone : 91-20-56525000

[nachiketa]

RESUME
Name : Nachiketa Shelke
Email ID : nachu.shelke AT gmail.com

Career Objective : Extensive problem-solver with proven analytical skills and quantitative skills; Seeking an opportunity to use best of my competencies and knowledge to gain valuable insights about software development and apply them to make continuous progress in the field of Electronics & Tele Communication.

Academics :
Current pursuing B.E in Electronics and telecommunication with an aggregate of 54.91% from P.V.P.I.T, Pune affiliated to Pune University. (Final year 2nd semester applied)
Completed H.S.C from M.I.T, Pune with 64.17 %.
Completed S.S.C from M.I.T, Pune with 58.26 %.

Technical skills : VLSI programming, microcontroller and microprocessor programming, Embedded C programming.

Project undertaken :
1. IR Transmitter
Detecting the barrier that causes interruption in IR. Used in automatic door opening in malls.

2. Prepaid Electricity Billing
Billing using smart card consiting of recharge unit & consumer unit(IC24C04,microcontroller,Max 232,Power supply).For efficient usage of electricity, easy billing.

3. Handfree Driving Automobile
Driving a car by indicating direction & identifying barrier without a driver(human) for automotive collision avoidance system.Electronic control unit,actuator,sensor.

Achievements :
Won third prize for Technical Paper Presentation in Indradhanushya 2010, PVPIT,Bavdhan.
Competition Participated : Circuit designing(Round 2), Rectify
Completed Robotics Course in V.I.T college securing grade ‘A’
Won second prize for Quiz in Indradhanushya 2011, PVPIT,Bavdhan.

Hobbies : Listening Music, Dancing, Swimming

[priyankaMP]

CIRRCULUM VITAE
PRIYANKA MANIK PATIIL
E-mail ID : priyanka.patil424 AT gmail.com
ACADEMIC PROFILE :
Project Details :
Final year :
Project Title : LRF Controlling Touch Screen Remote
Sponsored by : BHARAT ELECTRONICS LTD.
Details :
Our project deals with touch screen technology. The remotes used for controlling military equipments like Laser Range Finder (LRF) has buttons and hence may be problematic at times. So we came up with a new idea to make these remotes more easily accessible an efficient, reliable and robust using touch screens. In this remote we have used resistive type touch screen and graphic LCD because it’s more advantageous and cost effective.
Third year :
Title : Street Lamp Intensity Controller
Details :
In this project circuitry, a Light Dependent Resistor (LDR) is used which senses the light falling on it. According to the amount of light falling on it, the LDR gives out the corresponding voltage to the Analog to Digital Converter. This digital o/p is given to the microcontroller 89S52 which in turn processes i/p and produces some control signals which are given to the driver circuit. So basically the microcontroller controls the intensity of the lights completely and also decides the time for which they should be kept illuminated.
Skills :
- C PROGRAMING : At an intermediate level
- Assembly language programming : At an advanced level for microcontroller (8051)
& microprocessor(8086)
Degree/Certificate Name of the College / School Name of University / Board Year of Passing Percentage Obtained
B.E. E&TC Indira College of Engg. & Mgmt. University of Pune Pursuing
T.E. E&TC Indira College of Engg. & Mgmt. University of Pune 2010 51.4%
S.E. E&TC Indira College of Engg. & Mgmt. University of Pune 2009 55.133%
F.E E&TC Indira College of Engg. & Mgmt. University of Pune 2008 56.92%
H.S.C. Bharat Eng. clg, pune Maharashtra state board 2007 68.67%
S.S.C. Modern highschool, pune Maharashtra state board 2005 65.73%
Software Knowledge :
- Multisim
- Keil
- Xilinx
- Mide
- Microwind
- CodeVisionAVR
- CadStar
Fields of Interest :
- Robotics(automation)
- Embedded systems
Additional Qualification & activities :
- Achievement in MTS examination(Mathematics)
- Certified Computer Basic course with A grade
- Certified Analog, Digital & Mixed mode circuit Design using Multisim & Ultibaord Software course delivered by Trident Techlab Pvt. Ltd. At ICEM
- Attended one day workshop on Global Positioning System conducted by IETE Student Forum
- Also attended a workshop on DTMF signal based robot & appliances control
- Participated in Robotics competition held under annual national level symposium at Rajarshri college of engineering
- Participated in Robotics of national technical event Dexterity at Marathwada COE
- Worked as a Volunteer for National level conference “Advances in Engineering & management” held at ICEM during January 13-15,2011
Extra Curricular Activities :

- Secured 1st place in swimming competition (Zonal level)
- Won the Intra-college volley ball tournament
- Secured 1st place in Intra-college Basket ball tournament
- Attained the Camp on military Skill & Personality Development held by military institute
- Participated in inter-college Badminton competition
Strengths :
- Flexible to work under any condition
- Ability to work as both, an individual and as a team member

[amvedpathak]

RESUME
Anand M. Vedpathak
Mail Address- : amvedpathak AT rediffmail.com,amvedpathak AT gmail.com
Objective :
A career oriented, responsible and creative person, having a good quality leadership looking for challenging and responsible position where my knowledge, technical skills, & activities can be best utilized for the progress of the firm as a responsible person.
Summary :
10 years working experience in Electronics Component Industry& Auto Electronics.
Currently working as Product Testing Lab In charge.
Knowledge ISO/TS -16949 Systems, Kaizen, TQM.
Working Experience :
1. Name of the Company Vishay India Component Pvt Ltd .

Company Profile Vishay India Component Pvt Ltd is an ISO /TS 16949 US base
Organization, One of the World’s Largest Manufacturers of
Passive & Discrete Semiconductors components.
Designation Quality & Reliability Lab In charge.
Duration From 23rd May 2011 to Till
Nature of Job :
Product Testing from Resistor division & Capacitor division using IEC standards
1. Resistor testing as per IEC 60115- 1 & AECQ 200 qualification.
2. Capacitor testing as per IEC 60385- 14 & AECQ 200 qualification.
3. Planning of Periodic testing & Request testing.
4. Planning for Lab machines according to status.
5. Out side testing management for ESD Test & Mechanical shock test.
6. Generated Reports verification & approve the report.

Quality Management System & ISO 17025 for Laboratory management
1. Quality manual updating & Manage according to requirements.
2. Maintain the Standards & Test methods according to changes
3. Conduct the lab process audit as per 17025 & generate the management review report.
4. Ensure the Environmental, Occupational Health & Safety policy in the laboratory.
5. As a member of Quality improvement team & improving the product quality in terms of testing.
6. External ISO/TS 16949 & EHS audit are faced.
Training attends – External ISO /TS 16949 Internal Auditor & Machine FEMEA

Reporting person in the organization :
Manager Quality Resistor – Functional & Administrative
Manager Quality Capacitor - Functional
2. Name of the Company Minda Stoneridge Instruments Ltd.
Company Profile Minda Stoneridge Instruments Ltd.Is an ISO 9001-2000,
TS-16949 Company, Having joint venture with Stoneridge
U.S. based company. Manufactures of Driver Information
System (Speedo meters, Electrical Fuel/ Temp. gauges, fuel
Sensors, Tachometers) etc.
Designation Product Testing Lab In charge.
Duration From 27 June 2008 to 24 Apr 2011.
Nature of Job :

Electrical & Electronic Testing -
1. Product Performance as per product drawing.
2. Reverse polarity, Over voltage, High voltage flash test etc as per standards like (ISO 16750), EMI – EMC (As per ISO 7637, CISPER) testing at ARAI.
Environmental Testing -
3. Like Heat Test, Cold test, Thermal cyclic, Humidity tests as per standards like ISO,JIS,IS.
4. Sunlight testing like Ultra violet, weathrometer, as per ASTGM standards.
5. Salt spray testing for plated components & endurance testing.
Lab equipments selection & Planning -
6. Hot & cold Chambers selection & procurement.
7. For lab purpose attend the expo & other exhibitions for machinery.
8. New Product Validation / Testing as per various Standards. As well as Regular product.
9. Planning for Lab machines, Generation of Reports, Analysis of Faulty Products with
Design Team.
10. For testing required fixtures/Rigs are jointly developed with Process Engineering.
11. Analysis of Electronics Clusters from customers. (Warranty & line).
12. Analysis & Customer Support at customer ends.
13. Involving in IQA (Installations Quality Audit) audits at customer ends like Tata motors.
On job training given to persons.
14. Monitoring line rejection & warranty rejections data. (% / PPM level)
15. TS documentation, 5-s activity.

Achievements : Appreciation from Managing Director for Project completion
Support (Testing ).
Reporting person in the organization : Manager D&D .

3. Name of the Company Kinetic Communication Ltd.
Company Profile Kinetic is pioneer in the electronics manufacturing services,
Auto related products development & Project design. It
is an ISO-9000/TS 16949 company, Located at Pune.
Designation Sr. Engineer (Engineering Dept.)
Duration From 28 May 2007 to 26 June 2008.
Nature of Job :
1. In Charge Engineering Department. Leading a team of 5 Engineers.
2. Preparation of Bill of material, As per customer requirements changes in production process & customer interaction.
3. From customer Drawing & related documents issuing to all department.
4. Engineering support to production, as Fault finding .
5. Assist Project Department to bring new product in regular production. This includes creating guidelines for test procedure of a product & maintaining documents as per ISO Standards.
6. And handle a Project like assembly of component on SMT machines like TATA Motors,DB power, Philips etc.
7. Attained Management review meeting, weekly review meeting.
8. Knowledge of APQP, PPAP, PFC, PFMEA & Process Design.
9. Also Customer support for Maintain Quality of product & Customer complaints
10. Preparation of ISO/TS 16949 Documentation & internal Auditor in our Organization.
11. ICCT Programming & Test Fixture development.

Reporting person in the organization : G. Manager.

4. Name of the Company Minilec India (Pvt.) Ltd.
Company Profile Minilec is pioneer in the field of Protection relays, Control relays & Project design. It is an ISO-9001 company, located at Pune.
Designation Q.A. & Testing Engineer
Duration From 21 Nov.1998 to18 May 2007.
Nature of Job :
- Leading a team of 6 Engineers & Assemblers at Production stage.
- Preparation of Production Plan which includes preparation of Bill of material, Place order as per requirement & Scheduling Assembly Line as per Sales requirement
- In Process Inspection, Testing and Fault Analysis of Protection & Control Relays, Micro-Controller base Protection Relay & Alarm Annunciation Systems.
- Trouble shooting of protection relays which comes from Assembly line.
- Assist Project Department to bring new product in regular production. This includes creating guidelines for test procedure of a product & maintaining documents as per ISO Standards.
- Conduct training to newly joined engineers.
- Assist Design Department for cost benefits analysis.
Reporting person in the organization : Production Manager.
Responsibilities :
- Minimizing the Percentage of Rejection at every stage.
- Control & Dispose of non-conformity product & document.
- Work as per ISO-9000 Standards.
Achievements :
- Joined as an Electronics Engineer Currently working as Team leader at Production Department with leading team of 6 engineers & assemblers.
- Reduce & Maintain internal percentage of Rejection below 0.1 % to meet the target specified.
- Best Employee of the Year 2003-2004 award.
Projects :
While working in Minilec I have worked on following projects,
- Working with Project team worked on projects like V.F.D, Protocom1, F3VSR1, 2,3.
- Implementation of ISO-9001-2000 and Quality System Requirements in Final Inspection, Testing and Quality Control.
- Study & Implementation of TQM, JIT, Six Sigma, Kaizen.
Educational Qualification :
B.E. (Electronics & Telecomm.) Higher Second class from Pune University.
D.E&TC (Diploma in Electronics and Telecom. Engineering) in 1998 from S.E.S.Polytech.of Solapur, with Second Class.
Appear for MBA in Material & Operation.
Additional Qualification :
Computer Basics,
Certificate course Multimedia Graphics.
Personal skills :
- Target oriented with an ability to manage change with ease.
- Strong communication, interpersonal, learning & working in team, ability to manage stress, time & people effectively.
- Comprehensive problem solving ability, Hardworking, Ability to manage the team
Other details –

1. Current CTC – 5.13 lacs
2. Expected CTC – Negotiable.
3. Present Location - Pune

[Guest]

E-mail :wankhadeakash9 AT gmail.com
Akash D. Wankhade

Objective :
With A Heart For Discovery, A Mind For Technology And An Attitude For Winning, To Build A Career Of Fame In the World of Computers By Merging Practical Experience, Technical Knowledge And Skills.
Discipline : Electronics & Tele-Communication Engineering.
Academic Profile :
Examination Board/University Percentage Remark Year of Passing
B.E Sem-7th SGBA University 76% (U.T.) Distinction W-2011
B.E Sem-6th SGBA University 72% 1ST Class S- 2011
B.E Sem-5th SGBA University 75.84% (U.T.) Distinction W-2010
B.E Sem-4th SGBA University 75.54% (U.T.) Distinction S- 2010
B.E Sem-3rd\ SGBA University 76.15% (U.T.) Distinction W-2009
B.E Sem-2nd SGBA University 84.17% (U.T.) Distinction S- 2009
B.E Sem-1st SGBA University 82.17% (U.T.) Distinction W-2008
HSC Amravati Board 76.33% Distinction S- 2008
SSC Amravati Board 83.06% Distinction S- 2006
Aggregate :-77.41%
B.E.Degree in (Electronics & Tele-Communication Engineering) from P.R. Patil College of Engg&Tech, Amravati (SGBU-Sant Gadge Baba University).
Software Skills : C, C++ & VHDL.
Project :-
- “Dynamic bit loading in PDSL communication system”.
“Power line communication (PLC), also known as Power line Digital Subscriber Line (PDSL),are systems for carrying data on a conductor also used for electric power transmission. All power line communications systems operate by impressing a modulated carrier signal on the wiring system. The power line modem is a dedicated device, which is used for transferring data over low voltage power line, where electrical power is transmitted over high voltage transmission line distributed over medium voltage & used inside the building at lower voltages.”

Achievements :
- Visited to DUBAI at the age of 20.
- Former Convenor of Contraption in National Level Techfest “TECHELONS-2011” at P R P C E,Amravati.
- Achieved merit scholarships for 4 consecutive years.
- Won 3rd prize in Paper Presentation at National level.
- Won 1st prize in science exihibition at Z P High School, Nandgaon Peth.
Extracurricular :
Activities
- BSNL training at RTTC,Nagpur
- Attended workshop of “Swarm-Robotics”,at MIT Pune.
- Participated in “Circuit Desgining”at GCOE,Amt.
- Presented a seminar on “Spintronic Applications” in college.
- Participated in National Level Paper Presentation at Nagpur.
- Attended NSS Camp for 7 Days.
Hobbies : Reading news paper, helping to juniors & playing cricket.
Declaration : I hereby declare that the information furnished above is true to the best Of my knowledge.
Date : / /
Place : Mr. Akash D. Wankhade

[Guest]

RESUME
Miss. Pooja Bipin Nalawade
E- mail ID : nalawade.pooja7 AT gmail.com
I seek a position where I can gain the experience I require to do well in the engineering industry and work in a creative environment that will let me utilize my knowledge about the subject.

A] Engineering Education :
Name of Institution : Rajarambapu Institute of Technology, Islampur Dist:Sangli.
Branch : Electronics & Tele-communication Engineering.
Examination University Year of Passing Percentage Remark
B.E Shivaji May 2012 68.25 Distinction
T.E Shivaji May 2011 64.81 1st class
S.E Shivaji May 2010 64.94 1st class.
F.E. Shivaji May 2009 65.48 1st class.

Engineering Aggregate : 65.89%
B] Higher Secondary Education :
Name of College : Yashwantrao Chavan College of Science, Karad
Examination Board Year of Passing Percentage Remark
H.S.C Kolhapur 2008 79.67 1st class dist.
C] Secondary Education :
Name of School : Shri Vateshwar Kanya Shala,Vategaon.
Examination Board Year of Passing Percentage Remark
S.S.C Kolhapur 2006 84.93 1st class dist.
Programming Language : C,C++,MATLAB- programming.
Software known : Xilinx,Multisim 10.0,MATLAB 7.1.
- Attended the workshop of 1 month held in I2IT,Pune In Embedded Systems and VLSI Design in Robotics[AVR Microcontroller, Embedded C,CPLD & VHDL].
- Attended the workshop of 15 days held in SCL Pune,Training Division of Scientech Technologies Pvt. Ltd. Indore of in Embeded Systems.
- Attended industrial training in” DB POWER ELECTRONICS”,Satara.
- Attended the 2 days workshop in R.I.T. Rajaramnagar of Circuit Simulation using Proteus VSM CAD Tool.
- Attended “ Infosys Campus Connect Life Skills Program” at R.I.T. Rajaramnagar
- Design the hardware system- Three Phase Voltage Measurement using PIC microcontroller.
- Final Year Project :- BLDC Motor speed controlling by using Microcontroller.
In this project we have interfaced BLDC motor with the ARM controller .Motor changes its speed according to our entered speed, so there is no need of tachometer and variation of supply voltage for setting the speed of the motor.
- Worked as Student Co-ordinator of EESA(Student organization).
- Worked as Girl’s Co-ordinator of Vishakha cell.
- Scored out off marks in H.S.C. Geology.
- Participation in debate competition held under “IMMENSIA-09” at R.I.T. Rajaramnagar.
- Participation in A National Level Event “Deja Vu- A Creativity Booster..” held under I.S.T.E. at R.I.T.,Rajaramnagar.
- Membership in “ Indian Society for Technology Education” students chapter for the academic year 2008-09 in R.I.T. Rajaramnagar,Maharashtra.
- Membership in organizing committee of a National Level Technical Symposium “Kalyani-RIT Quantum-2010”& “Kalyani-RIT Quantum-2011”.
- Membership in “Nature club” R.I.T,Rajaramnagar.
- To accept challenging tasks especially related to Managing and Organizing.
- Reading non-technical books.
- For entertainment I like to listen hindi songs.

I hereby solemnly declare that all the information furnished above is true to the best of my knowledge.
Place : Islampur
Date : 03.07.2012
Miss.Pooja B. Nalawade.

[Guest]

Curriculum Vitae
Name : Pranita Prakash Barad
Email Id : pranita.pb AT gmail.com , baradpranita.etc AT mmcoe.edu.in
Objective : Seeking a challenging and rewarding entry level electronics and telecommunication engineer position with a major company.
Educational background :
Qualification University/ College Month-Year Percentage
S.S.C Maharashtra Board/
M.I.T school, pune March 2006 74.40%
H.S.C Maharashtra Board/
M.I.T Jr College, Pune March 2008 62.67%
B.E(semester 1)Electronics and telecommunication Pune University/
Marathwada Mitra Mandal’s college of engg, pune Nov 2011 52.26%
Appeared for B.E(SEM 2),Marathwada Mitra Mandal’s College of Engineering,Pune
Subjects studied in BE Last Year :
Semester 1 Semester2
Embedded systems and RTOS Telecommunication and Switching systems
Electronic Product Design Optical fiber communication
VLSI Design and technology Television and video engineering
Computer Networks Automotive Electronics
Entrepreneurship Development
Technical Proficiency :
- Operating systems worked with : windows 7,Vista,XP,Unix-Ubuntu
- Software’s worked with : Matlab,Keil,Multisim,Mikro C, labview
- Programming language known : C, Assembly
- Computer language known : C language
Academic Projects :
- Mini Projects :
1. LCR meter Using PIC microcontroller :
The LCR meter enables users to measure the values of basic components like resistors, capacitors and inductors precisely. The various components can be measured by connecting the component across the kit consisting of a PIC microcontroller which displays the value of the component on the LCD display attached to the kit.
2. Liquid level sensor :
Senses the level of liquid in tanks or dams and decides the level of risk or unsafety to take proper actions.
- Major Project :
1. Title : Real Time GUI development for fault insertion in vehicle’s ECU.
Sponsored By : KPIT Cummins infosystems, Pune.
Develop a GUI to overcome the difficulties faced in manual testing of vehicle’s ECU,by automating the testing procedure. The user is provided with a GUI display which will facilitate the user to instantly insert the fault in the ECU and see the results.
Areas of interest :
- Embedded systems
- Mobile technology
- Automation

[Guest]

Can I join your company? I'm a fresher candidate,I have submitted my resume below.

RESUME
Raj Kishor Kand
Email : rajkishor.kand AT gmail.com
Intend to build a career with a growthoriented organisation of repute.

OBJECTIVE :
To work with one of the best organization where I can learn and use my skills so as to contribute towards company’s growth as well as mine.

EDUCATIONAL BACKGROUND :
Qualification School /College Board /University Year of Passing Percentage/Grade
Bachelor in Technology Padmanava Biju Pattnaik 2012 6.9(C.G.P.A)
(Elctronics & College of University of
Telecomm.) Engineering Technology
Sec4
Rourkela
+2 Science Barpali Collage,Barpali Council Higher 2006 54.9%
Secondary
Education
Matriculation Saraswati Shishu Board of 2004 75.2%
Vidya Mandir,Barpali Secondary
Education

Academic Projects :
Minor Project : Three Phase Equipment Protector
Major Project : Industrial Device Controller Using RF Signals
Training And Participations :
Undergone vocational training under "ROURKELA STEEL PLANT" in Rourkela.

SOFT SKILLS :
Operating System : Windows 98/2000/XP/Vista/7
MS Office : Word,PowerPoint
Languages : C,C++

Relevant Skills :
Comprehensive problem solving abilities, decent verbal and written communication skills.
Independent in thoughts, a good listener and open to ideas, but with a firm self belief.
Goal oriented and strong believer of group work.

Qualities :
Self Confident
Friendly Nature
Discipline

Hobbies& Interests :
Love to play outdoor games.
Listening Music.
Surfing And Watching Wildlife Diversity.

Personal Details :
Date of birth : 8th JULY 1989
Nationality : INDIAN
Religion : HINDU
Domicile : ODISHA
Gender : MALE
Marital Status : SINGLE
Languages known : ENGLISH, HINDI & ODIA
PRESENT ADDRESS :
Po Barpali
DistBargarh
Odisha768029

Declaration :
The information furnished above is true to best of my knowledge and belief.
Date09th Dec 2012
PlaceBarpali Raj Kishor Kand

[Unregistered]

Mr. Banty Ashok Hole
Email :- bantyhole AT gmail.com

OBJECTIVES :
Intend to build a career with leading corporate of hi-tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential.

STRENGHTS :
** Strong determination to achieve my desired goal.
** Flexible approach for getting the goal.
** Hardworking, efficient & motivated person with positive approach.
** Team Leader as well as team member, Time Management.
** Effective verbal and written communication skills.
** Decision making capability, Consistency.
** Goal oriented, proactive, relish challenges, energetic.
** Innovative, self-motivated, responsible, quick learner.

ACADEMIC QUALIFICATION :
Exam Passed Name of Institution University/Board Year Of Passing Percentage Grade :
Degree in Electronics & Telecommunication Engineering SVPM COE Baramati Pune University 2013 62.72% First Class
H.S.C. SCSM, Shrigonda Dist.A.nagar Maharashtra State Board 2009 78.33 % Distinction
S.S.C Sharda Vidyalaya, Shrigonda Dist.A.nagar Maharashtra State Board 2007 88.15 % Distinction

CURRICULUM PROJECT & OTHER ACTIVITY :
** Mini project :-Electronic voting machine by using micro-controller.
** Final year project :-Automatic irrigation system & control by using zigbee & GSM.
** Attended national level workshop on MICROCONTROLLER, held a Dr. DaulatraoAher COE Karad by Dr. Ajay V. Deshmukh (Ph.D. :- I.I.T. Bombay).
** Coordinator in National level Event ‘CIRCUIT DESIGN’ held at C.O.E. Malegaon(BK).
** Second Prize Winner National level Paper Presentation held at KBP COE Satara.
** Participated in National level Paper Presentation held in S.B. Patil COE Indapur.
** Participated in Greeting card competition event held at C.O.E. Malegaon (BK).
** Attended one day workshop on ‘ROBOTICS and IC ENGINE CAR’ in the COE Malegaon(BK).

TECHNICAL SKILL :
Programming Languages Assembly language for microcontroller 8051, C language, VHDL, Mat lab,Embedded
Internet Technologies HTML
Software Ride (Microcontroller 8051 programming tool)
Microcap Evaluation 6.0 (Analog circuit simulator)
Xilinx 8.1 (VHDL Programming tool)
MATLAB 7.0 (SAS , CS application)
Multisim Circuit simulator (by- NI)
Microwind back end (CMOS Design)
Labview, Flash magic, Expresspcb, pad2pad
Operating system Windows XP/VISTA/2007, Linux, MS DOS 2007
Office Automation Tools MS Office (MS Word, MS Excel, MS PowerPoint, etc.)

PERSONAL DETAILS :
Name : Mr. Banty Ashok Hole
Email ID : bantyhole AT gmail.com
Date of Birth : 30/09/1991
Gender : Male
Hobby : Cricket, Bike Riding, Chess, etc.
Languages : English, Hindi,Marathi
Marital Status : Single
Nationality : Indian

DECLARATION :
I hereby declare that the above mentioned information is true to the best of my Knowledge and I bear the responsibility for correctness of the above mentioned particulars.
Mr. Hole Banty Ashok

[Unregistered]

PROFILE
Personal Details :
Name : Amit Kalkundrikar
Date of Birth : 21 September 1982
Nationality : Indian
Passport : Yes
Language : English, Marathi, Hindi, Kannada, Tamil.
Email Id : kalkundrikara AT rediffmail.com
Current Location : Pune
Marital Status : Married

Personal Summary :
A passionate, driven and motivated Analyst with a methodical and analytical approach to implement and maintain networking protocols, install operating systems and resolving problems. Possessing a proven ability to developing polices & procedures covering network infrastructure design, build, testing, implementation, support.
Having excellent communication skills and able to priorities key issues. Currently looking for a suitable position with a reputable and forward looking company.

Current Company and Work Experience :
BNY Mellon (India) Pvt. Ltd – Magarpatta City, Pune
ANALYST June 2008 – Present (4+ Years)
Responsible for the day to day support of the network communications & infrastructure architecture across all company locations. Also working with 3rd party vendors to ensure quality delivery and support of the network infrastructure.
Experience Summary :
** Knowledge of Windows, Linux and Unix Operating system.
** knowledge of C, C++, Java, ASP.net, MS Access and Crystal Report
Responsibilities :
** Online Banking System, Managing International National Payments satellite Network system
** Working closely with a team of programmers, designers & IT managers.
** Identifying problems and then suggesting technical computer-based solutions.
** Assisting on DR planning.
** Working on documentation and capacity management.
** Ensuring robust network backup and recovery capability.
** Hands on experience of server operating systems, security and remote access.
** Working with IP routing protocols. OSPF, BGP and PIM.
** Knowledge and experience with Firewalls, including Nokia IPSO in resilient environment and Checkpoint.

Previous Worked Companies :
** WNS GS Pvt. Ltd. Pune 2006-2008 (1.5 Years)
** D-LINK (INDIA) PVT. LTD VERNA GOA 2004-2006 (2 Years)

Key Skills and Competencies :
** Proven ability to work under pressure and to meet deadlines.
** Able to work as part of a team, and work shifts, evenings and weekends.
** Able to present & negotiate at all levels in a non-technical manner.
** Knowledge of IP addressing and TCP/IP networking.
** Understanding of Change, incident and problem management.
** Experience of network protocols and ITIL Foundation.
** Knowledge of TCP/IP.
** Good knowledge of IP routing protocols. OSPF, BGP and PIM essential.
** Experience of programming, including visual basic or scripting languages.
** Constantly focused on improving customer service through improved infrastructure management.

Course and Certifications :
1. Microsoft Certified Professional MCP ID 7852636
2. CISCO Certified CCNA ID CSCO11469011
3. Completed Training for Linux & CCNP
4. Completed Training for MCSE on Windows 2000/2003.

Academic Qualifications :
B. Tech Computer Science (Distance Learning VIth sem) Karnataka Open University
3 Years Diploma E & C (After 10+2 Science). Karnataka Technical Board, Bangalore

AMIT K ALKUNDRIKAR