Atmos Industries Pvt Ltd Delhi : HVAC Engineer

[mskavi]

Atmos Aircon Delhi/NCR : HVAC ENGINEER

Designation: HVAC ENGINEER

Job Description:
The ideal candidate should be B.E / B Tech in Mechanical Engineering with 3- 5 year Experience in managing / commissioning of HVAC project ( Ducted / Chiller / VRV System)
Knowledge of Heat load calculation / designing of system / Ventilation.

Desired Candidate Profile:
1. Heat load Calculations and detailed psychometric analysis.
2. Selection and design of air-conditioning equipments, piping and duct design and routing.
3. Vendor documents/drawings review and approval
4. Technical and commercial discussions.

Address:
Atmos Industries Pvt Ltd
8C /13 W E A KAROL BAGH
NEW DELHI,Delhi,India 110005

Email Address: atmosaircon.info@gmail.com Kurt@atmosindustries.com
Website: http://www.atmosindustries.com

[harishgautam]

dear sir i want an opportunity to learn about hvac sir i have two year experience as duct draughtman hvac

[Guest]

TO,
________________________

Subject :- Application for the post of AC Central Plant Ducting Supervisor with P.N.V Ducting & Insulation.
Dear Sir,
With reference to you advertisement in __________________________________ dated________. I am Sending you my C.V and a recent photograph for the post of ____________________________________ Brief particulars of my C.V are as follows.
Name : SH. NARENDER BEHL.
Experience : Worked as Duct Fabricator With
1. M/s Naresh & Co., New Delhi from May 1978 to Dec 1980.
2. M/s Somduttt Builders, Iraq from 6/2/81 to 6/2/82.
3. Other Companies from 1982 to 1983.
4. M/S Tony Electronics, Noida, U.P. from 1/7/1985 to 15/12/1987 as Central Air Conditioning Duct Fabricator.
5. Other Companies from 1987 to 1990.
6. M/s Super Cassettes Industries Ltd, Noida, U.P. as Officer-in-Charge Ducting Sheet Metal From 1/9/1990 to 28/10/1996.
7. M/s Vishva Electronics Ltd. As Central Air Conditioning Duct Foreman from 8/11/1996 to 10/11/2003.
8. Pioneer pollution control pvt ltd. From December 2010 to till now.
Total Experience : 35 years (Approx.)
In view of the above experience I hope I will be given a chance for the said post.
Thanking You,
Yours faithfully,
(NARENDER BEHL)

[Guest]

ASHISH BHARGAV
E-Mail : aashishbhargav AT yahoo.com

CAREER OBJECTIVE :
To hold a position with responsibility in an esteemed organization and serve for its development and growth.

STRENGTH & CAPABILITIES :
- Positive attitude, strong interpersonal skills, organizing skills with a very pleasant personality & ability to effectively manage stress, time and people.
- High performance & result oriented team builder to lead the team in delivering desired results.

WORKING EXPERIENCE :
I am working with ETA ENGINEERING PRIVATE LIMITED (DMRC Division) Delhi as a SR. PROJECT ENGINEER (Mechanical Engg.) from july-08 to till date. ETA a part of ETA ASCON group of companies of Dubai U.A.E .ETA is reputed Electro Mechanical contracting company involving design, installation, testing & commissioning of MEP projects in Delhi Metro Rail Corporation, airports, commercial complexes, & a leading business conglomerate in Asia.

PROJECTS UNDERTAKEN :
- MEP, TVS Project at DMRC underground GTB Metro Station GTB Nagar, Delhi-110007; Approx Cost INR 35 crores.
- Currently working on MEP, HVAC Project at DMRC underground INA Metro Station Approx Cost INR 33crores from 1st September,08 till date.

NATURE OF JOB PROFILE :
- Planning, monitoring & controlling all site activities including manpower planning, resource planning & material planning for the system.
- Project execution as per schedule.
- Familiarity with Scopes of Work
- Monitoring of project implementation progress & preparation of project control reports.
- Co-ordination with client, design, purchase and materials department for smooth execution of project.
- Coordination with other services & associates.
- Interface with client and provide confidence in project performance & survey customer satisfaction.
- Projects kick off & review meeting with contractors.
- Co-ordinate and ensuring the timely availability of material required for the job and verification it with bill of quantity.
- Check installation, equipment erection, inspection, testing & commissioning.
- Check quality of works, compliance to technical specification, timely completion of works & to ensure quality & performance standards.
- Periodic progress report to clientand ensure stage payments as per job overall plan.
- Certify Sub contractor’s bills.
- Preparation of As built drawings.
- Promoting safety of works at site.

EDUCATION :
- B. E. (1st Division 73.62%) from Truba Institute of Engineering & Technology, Bhopal in 2008.

SOFTWARE SKILL :
- Knowledge of Solid Modeling (PRO-E) version Wild Fire-3, proficient in solid modeling.
- Knowledge of Computer Numeric Control (CNC) Programming on the CNC Machine.
- Knowledge of Programmable Logic Control (PLC) Programming in Sinumeric Language.

COMPUTER SKILLS :
- Knowledge of (MS Word, MS Excel, MS Office, Power Point, Internet).

[shabbir wahab]

I am B.E. Mechanical Engineer & have experienced 2 years in HVAC Engineering F ield as a Project Site Engineer / Erection Engineer / Execution Engineer / Design Engineer.
At that time, I am search a job in this Field.
So, Please find the Attached CV for the post of Mechanical/HVAC Engineer.
Curriculum Vitae
Shabbir Wahab
E-Mail : shabbir.wahab592 AT gmail.com
Job :- Apply for Mechanical/HVAC Engineer
____________________________________________________
Career Objective :
To be a part of the company which ensures exciting & challenging working techniques. To excel in individual capacity as well as a team player and to develop the spirit of innovation. To be a part of the framework where employees are not confined to their desks.
Academic Records :
Bachelor of Engineering in Mechanical under Visveshwaraiah Technological University, Belgaum, karnataka.
TECHNICAL QUALIFICATION :-
Examination Passed University Percentage obtained Year of Passout till 8th semester Year of Cleared Degree with one backlog paper Class Obtained
B.E.(Mechanical) V.T.U Belgaum 54% 2009 2010 Second Class
PRACTICAL TRAINING IN COLLEGE :-
- WORKSHOP
- COMPUTER PROGRAMMING LAB
- ENGINEERING PHYSICS LAB
- ENGINEERING CHEMISTRY LAB
- MATERIAL TESTING LAB
- FOUNDRY & FORGING LAB
- COMPUTER AIDED DRAFTING LAB (with AUTOCAD)
- MECHANICAL MEASUREMENTS AND METROLOGYLAB
- CAD/CAM LAB
- MACHINE SHOP
- FLUID MACHINERY LAB
- ENERGY CONVERSION ENGINEERING LAB
- DESIGN LAB
- HEAT TRANSFER LAB
EDUCATION QUALIFICATION :
Examination Passed Board/University Year of Passing Percentage obtained Class Obtained

B.Sc part-I Magadh University 2004 53% Second Class
P.U.C II Bihar Intermediate Council 2003 63.6% First Class
Matric Bihar Board 2001 64% First Class
Personal Skills :
- ENGINEERING PROJECT REPORT :- PROTOCOL OF AUTOMATIC CAR FOR IGNITION START AND STOP BY USING DTMF(Dual Tone Multi Frequency) TECHNOLOGY.
- Engineering SEMINAR REPORT : - STEALTH TECNOLOGY.
ADDITIONAL TRAINING :-
Completed three months ( HVAC) Heating Ventilation and Air Conditioning Design Training in Air Conditioning Projects consisting of Theory & Practical with TECNOLCO institute of HVAC Nampally, Hyderabad.
Training Contents
- E-20 Form, ASHRAE / SMACNA Standards, Window A/C, Split A/C.(Ductable / Non-Duct able), Package A/C, Duct Designing (for Residential Complex and Villas), Ventilation, Chiller Design Plumbing / Fire Fighting, Tendering, Estimation & B.O.Q
- Designed project work of HVAC for Ground + 10 Typical Floors Residential Building during Training of HVAC Design.
- Design & Drawing of all types of Split A/C and preparation of Duct layout with Supply & Return Diffusers, Duct Grill, Slot Diffusers with flexible connections for G+10 Typical Floors Residential Building.
- Cooling Load calculation by manual method with E-20 Form, CFM calculation & Air Distribution to various branches of duct.
- Duct Size Calculation by Duct Sizing method / Equal Friction Method, Calculation of No. of G.I. Sheet & Gauge required, Selection of SAD/RAD (2-way, 3-way, 4-way), SAG/RAG, Slot Diffuser etc.
- Selection of FCU with reference to TR required in particular Rooms/Halls.
- Static Pressure Calculation for Selection AHU.
- GPM calculations and Distribution of Chilled water to various FCU & AHU through chilled Water Supply & Return Pipe.
- Calculation of Chilled Water Supply & Return Pipe Diameter & Pipe friction losses througstandard Friction Chart for Closed Piping Systems.
- Selection of Chillers through Catalog of CARRIER & TRANE on the basis of TR capacity required for completed G+10 floors, and Leaving Chilled water Temp. & condenser Entering Air Temp.
- Pump Head Calculations for the selection of chiller pumps by considering complete chilled water supply & return pipe length and all the fitting equivalent length (Bend, Tees, Reducer, DRV, NRV, Strainer, F.C, I.V etc.), also selection of stand by pumps.
- Preparation of Riser Diagrams showing location of all the equipments with details.
- Preparation of FCU schedule, No. of LH/RH FCU required with TR, Preparation of Bill of Quantity/Material (B.O.Q.)
- COMPUTER KNOWLEDGE
Office Automation : Ms-Office (Word,Excel, PowerPoint).
Comp. Languages : “C” Language.
Designing Software : E-20 (II), Elite for Duct size calculation.
EXPERIENCE :-2 Years in HVAC Engineering Field.
Well experienced in HVAC Design and Installation making technical submitted in compilation with specification.
Execution of Ducting, installation and commissioning & Balancing of air in air conditioning.
Co-ordination with client Engineers, Consultants for the approval of A/C drawings and getting the work done at site.
Experienced in resolving problems independently on my own and decision maker to solve as per the requirement .
Duties & Responsibilities :-Cooling & heat Load Calculation: CARRIER & ASHRAE codes.
Complete the project work by vendors.
________________________________________________________________
Calculations by manual method & HVAC software.
Window & Split Air Conditioners : Coordinates activities of workers engaged in installation of Machine, wiring, electrical, HVAC equipment , e.t.c. such as installation of window A/C, Split A/C, Wall Mounted, Ceiling Suspended, Cassette type, Floor Mounted, Corner type, Ductable Split A/C.
Ducting : Calculation of Blower CFM, Air Distribution, Duct Design, following SMACNA, Selection of Diffusers, Duct Grills, Calculation of no. of G.I. Sheets required, Gauges of G.I. Sheets, all other Standard duct connections, Pre-commissioning and Commissioning of Duct.
Piping : Coordinate with worker to installed the supply water pipe & return water pipe from Chiller to AHU,e.t.c.
Ventilations : Completed Design and selection of Extract-fans, Centrifugal Blowers, Axial flow fans, Duct in-line fans,etc. Preparation of Riser Diagrams, Installation & Commissioning of ventilation system for Toilets, Bathrooms, Basements, Corridors etc.
Estimation : Preparation of B.O.Q. by referring consultant specifications, materials take off etc. Preparation of material submittal for the consultant approval with drawings, preparation of schedule as per associated work.
Work job Profile :-
Worked with M.E.P Engineering & Contracting co. (carrier authorized dealer), from 27th june 2011 to 29th september 2011 as a HVAC Engineer in New Delhi.
Worked with United Aircon – India (Authorised dealer of Carrier Air Conditioning System) as a Site Engineer & handled the project as a Project Engineer from 8th February 2010 to 18th june 2011.
Worked with s.s.cooling system, from 7th August 2009 to 3rd February 2010 as a Site Supervisor in Hyderabad.
Project Handled :
Prepare schedule as per associated work, Bill of Material, Extra Item Bill, with the reference by client agreement documents. Prepare schedule by 1st R/A Bill.(all such work doing in MTNL, Delhi).
AHU, Supply & Return Chilled water Piping, A/C Supply & return & exhaust Duct ,Grill ,e.t.c. installation & erection in Savitri cinema,Gk-II, near Nehru place,New Delhi of 150 TR.
Installation, erection & Hydraulic Pressure Testing of water piping underground for Gas Plant in DENSO Company, IMT Manesar, Gurgaon , Haryana.
Selection of Duct sizes, diffuser, grills, e.t.c.& Execution erection & Air balancing of A/C Duct,Grill & diffuser, for supply / return / exhaust in Future Group Office in vikroli, Mumbai, 800TR.
Supply , return, & exhaust Duct , grill, diffusers, In-line fan, fire & VCD damper, installation,execution & erection in Manchester united Bar, Malad, Mumbai.
A/C Layout for yusuf Hotel, mallapally, 85 TR, SAD/RAD, Duct Grill.
A/C DUCT installation in shuban hotel nampally,45 TR.
A/C Duct layout for institute, darga road, 25 TR .
Qualification: B.E. Mechanical

[Guest]

CURRICULUM VITAE
OM PRAKASH NARAYAN
E-mail : opn_pandit AT yahoo.co.in,panditopn AT gmail.com
OBJECTIVE
Aim to be associated with the organization that provides me a chance to show my abilities and skills and to be part of the team to work dynamically for the development ofthe organization.
EDUCATIONAL QUALIFICATION
COURSE/ DEGREE SCHOOL/COLLEGE/ UNIVERSITY YEAR OF PASSING PERCENTAGE
B. Tech
(Mechanical) GSS Institute of Technology, VTU, Bangalore 2008 56.90
Intermediate(PUC) Bihar Intermediate Education Council, Patna. 2001 69.55
Matric (SSLC) Bihar School Examination Board, Patna 1999 68.71
EXPERIENCE :
- Worked as HVAC supervisor (Maintaince) in M/s BROSBEL ENGG. Bangalore from October 2008 to August 2009
PERSONAL SKILL
- Ability to learn new skills
- Can easily adjust to new environments
- Quick learner, Problem solver
- Good communication skills
PROJECT : Engine Management System (B.Tech)
The Project is design to control the fuel quantity and sparking in a very efficient and control manner so that the fuel burns completely. This result in the higher fuel efficiency, less fuel consumption, reduced pollution and also the better performance of the engine.