www.isgec.com Bharuch : Production Engineer

[mskavi]

ISGEC Bharuch : Production Engineer / Sr. Engineer

Designation: Production Engineer / Sr. Engineer

Job Description:
1. General Fabrication of Static Equipments.
2. Heat Treatment of Equipments.
3. Sound fabrication knowledge of static equipments like heat exchangers , reactors, boilers etc.
4. knowledge of ASME codes and TEMA.
5. Candidates should have experience in Man management and should be aware of various aspects of fabrication , machining and welding.

Desired Candidate Profile:
1. B.E - Mechanical / Metallurgy / Industrail Engg.( aggregate 60% and above )
2. Dilpoma : Mechanical ( aggregate 60 % and above )
3. Sound fabrication knowledge of static equipment like Heat exchangers , reactors , boilers etc.
4. coordination with purchase , planning dept.
5. Knowledge of ASME codes and TEMA
6. Good experience in a similar type of organisation.

Address:
ISGEC
13 B, GIDC Industrial Estate
Tal: Vagra: Dahej
BHARUCH,Gujarat,India 392001
Email Address: amit.verma@isgec.com
Telephone: 91-2641-305511
Website: http://www.isgec.com

[pare.rani@gmail.com]

respected sir,
i have pass diploma meccenical 69.84% in 2009.and i have treanning in gsfc vadodara contienue.and also 12th science passed.

[Guest]

dear sir,

i am a diploma in mechanical engineer. i have passed my diploma in 2008 from shree k j polytechnic, bharuch with 68.84%.i want to do the job in your industry.i hope you will give me a positive answer. sir my mobile no, is 9978568433, 7698325885.my interested field is production & maintanance.

with regards,

dasharath limbachiya.

[Guest]

JWALANTKUMAR BAKULBHAI PATEL
AT: VALTHAN,
POST: MANKNA,
TA: KAMREJ DIST: SURAT GUJARAT .394325 E-mail: jwalant3512@gmail.com
Phone no-09662857711

[Guest]

Application

TO,
SUB :-To apply for post of mechanical engg.
Respected Sir
I had completed my B.E.MECHATRONIC Engineering in G.H.Patel College of Engg & Tech, from V.V.Nagar S.P.UNIVERSITY.
I am also enclosed my resume giving details my qualification and other Data’s relevant to my job. Have proved my honesty, hard working and dedication to my Work .based on the above fact. I would like to offer my candidature in your organization and to prove my worthiness case chance is given by you. I would request you to kindly consider my biodata and give an opportunity to work in your organization.
I will appreciate your reply for kind consideration of my candidature in your organization.
Thanking you,
CURRICULAM VITAE
PANCHAL MAINESH R.
B.E. MECHATRONICS
Email : maineshpanchal AT yahoo.com

OBJECTIVE :
Looking for a opportunity which can help me to grow my Professional skills as well as, in the process to grow with the company and I can explore my motivation and demonstration, my commitments at the same, to achieve success both in term of job and monetary satisfaction
.
EDUCATIONAL QUALIFICATIONS :-
SR.
NO. BOARD/
University QUALIFICATION YEAR OF PASSING TOTAL
(%) GRADE
1 J.D.PATEL HIGH SCHOOL,BORSAD S.S.C MARCH
1998 75.57% DISTICTION
2 J.D.PATEL HIGH SCHOOL,BORSAD H.S.C MARCH
2000 68% FIRSTCLASS
3
G.H.PATEL COLLEGE OF ENGG &TECH.,V.V.NAGAR
(S.P.University) B.E.MECHATRONICS July
2008 4.32CPI
43.20% PASS CLASS
PROJECT NAME :-
- Microcontroller Based On Hydraulic Power Steering
ELECTIVE SUBJECT :
- Computer added design
- Production Optimization tech
INDUSRTIAL VISIT :-
- Baroda Dairy (1 day)
- Gujarat Energy Research institute(1 day)
- SECO CUTTING TOOL(7DAY)
- EMCO Elecon, V.V.Nagar
- Fine Cast Pvt. Ltd., V.V.Nagar
EXPERIENCE :-

VINAMARA CORPORATION :-

- VINAMRA CORPORATION IN WORKING AS SALES ENGINEERS
- PERIOD :-SINCE 1/6/08 TO 31/8/08
- AT THAT TIME TRAINING OF SECO CUTTING TOOL AND THEIR APPLICATION
(4-8AUGUST) AT PUNE. SECO CUTTING TOOL.
RMS POLY TECHNICS BARODA :-
- RMS POLITECHNIC COLLEGE WORKING AS A LECTURER IN MECHANICAL DEPARTMENT.
- PERIOD :-SINCE 1/9/2008 TO 13/3/2010
Job Responsibility :
- When I am Lecture mechanical department at that time teaching subject is
1. Design of machine element
2. Manufacturing process-1
3. Manufacturing process-2.
3. Thermal engineering.
4. Industrial engineering.
COMPANY PROFILE :-
- JORD ENGINEERS INDIALTD. IS MAFACURING COMPANY OF FINTUBE, AIR COOLED HEAT EXCHANGER, STRUCTURE, HRSG JOB USE IN BOILER
- Presently working with jord engineers India ltd as a QA/QC JR. ENGINEER IN PROBATION at asoj plant , Vadodara, Gujarat since MARCH -2010 till to DATE.

Job Responsibility :
1] Incoming Inspection
- Inspection of Raw Material (Visual & Dimensional)
- Verification of Mill Test Certificates against applicable codes & Specification.
- Identification of Raw Material under third party Inspection Agency.
2] In process Inspection
- To study detail requirement of Client from the P. O. and Technical Specification with a view of quality fulfillments.
- Carry out inspection as indicated in Quality Assurance Plan (Q.A.P.) like Set-up, Welding (awareness of WPS,PQR,WPQ), heat treatment & Dimension, follows all step of Q.A.P.
- Carrying out /Destructive & Non Destructive Tests according to QAP / PO / Technical Specification e.g. Tensile, Impact, Bend, Hydro, Hardness, UT, RT, DPI, MPI, Chemical, PMI etc.
3] Final Inspection
- Visual & Dimensional check the products as per standard.
- Offering the fittings to third party inspection agency like EIL, LRA, TPL, TUV, BVIS, SGS, DNV etc.
COMPUTER SKILLS :-
- C & C++programming
- MS Office
- MS Excel
- MS word
- CNC programming

[Guest]

CURRICULUM VITAE
ANKUR B. PATEL

E-mail : ankur_11289 AT yahoo.co.in
OBJECTIVE
To be good mechanical engineer with a challenging post in the company and to work towards my goal, utilizing my skills and give away best of me to company.
EDUCATION
- 2010, B.E. Mechanical Engineering,
S.V.I.T.(Sardar vallabhabhai patel institute of technology) VASAD, BARODA.
GUJARAT UNIVERSITY (GU).
SEM 7 :- 56.94 %
SEM 8 :- 60.23 %
AVE :- 58.58 % Second class.
- Secondary & Higher Secondary Examination,
Gujarat secondary Education Board.
HSC :- 60.40 % First class.
SSC :- 70.29 % Distinction.
PROJECT AND SEMINAR
I prepared a project on the Single Cylinder Bucket Pump Operated by an Electric
Motor.

I prepared seminar report on the Underwater Welding.
TRAINING AND INDUSTRIAL VISIT UNDERTAKEN
I have taken industrial visit in CAPIQ ENGG PVT LTD. VADODARA.
I have taken industrial visit in PRAYAS CASTING LTD.VALLABH VIDYANAGAR.
I have taken industrial visit in AUTOMATE INDUSTRY, GIDC, VADODARA.
I have visited VANAKBORI POWER STATION.
I have taken vocational training in JYOTI LTD.VADODARA.
EXPERIANCE
Graduate Apprentice Trainee in ASIAN PAINTS LTD, ANKLESWER.
ACTIVITIES
Preventive Maintenance of equipments of Plant
Maintaining ISO Documents of preventive Maintenance
Scheduling of Preventive Maintenance & monthly uptime data of production equipments using SAP/R3-PM
COMPUTER SOFTWARE PROFICIENCY
AutoCAD 2008, 2009.
MS Office 2009, 2007 and below.
Windows operating system 7/Vista/Xp and below.
Basic computer and internet.
C language.
SKILLS
Communication, Interpersonal, and Organizational behavior skills
Creativity and Training skills

Teamwork and Leadership qualities

[Guest]

Hello sir i am a mechanical engineer.plc give me an opportunity.i must put my technical skill.

[piyush23]

PIYUSH AGRAWAL
E-mail : piyushagrawal23 AT yahoo.com
Objective :
My aim is to attain a challenging and creative role in your esteemed organization. I owe a desire to learn and keen interest in application of the knowledge for the benefit of the organization and the growth of my career.
Education :
- B.Tech. in Industrial Production from Institute of Engineering And Rural Technology, 26 Chaitham Line, Allahabad-211002 [U.P.] with 68% in 2011.
- ISC Passed in First class,66.4% from Boys’ High School & College, Allahabad in 2007
- ICSE Passed in First class,73.8% from Boys’ High School & College, Allahabad in 2005
Trainings :
- ROBOTICS under the TECHNOPHILIA SOLUTIONS in 2008.
- BASIC ROBOTICS under BRICS, I.I.T, Kanpur in 2009.
- SUMMER TRAINING in SOUTH EAST CENTRAL RAILWAY[S.E.C.R.] from Bilaspur [Chattisgarh] in 2009.
- SUMMER TRAINING in AREVA T&D Ltd. from Allahabad in 2010.
Achievements :
- Awarded 2nd prize in Science Exhibition held at school level in 2004.
- Awarded Consolation in Sci-Fest ’05, sponsored by Rotary Club, Allahabad in 2005.
- Awarded “Best Design” in “Savior Sense”, a robotics event in TECHKRITI ’08- the annual science and technology festival of I.I.T., Kanpur held at international level in 2008.
- Secured among best five[5] in MYST- a puzzle, in TECHNOVANZA ’09- a national level technical festival held at Veermata Jijabai Technological Institute [V.J.T.I.], Mumbai in 2009.
- Awarded 2nd prize in PUZZON, in RENAISSANCE ’09- A National Level Technical cum Cultural Youth Fest held by Jaipur Engineering College And Research Centre [JECRC] in 2009.
- Was selected and invited to present my paper in Conference On Mechanical Engineering & Technology [COMET] held at IT-BHU, Varanasi in 2010, and my paper was printed and appreciated in their magazine.
- Acted as MAIN HEAD of TECHNOVATION 2010-the annual technical fest of Institute Of Engineering And Rural Technology[I.E.R.T.]
Projects :
- Project name : Perpetual Generator
Description : In this project, am proposing a plan for the making of a perpetual generator which does not require any external force for its working, i.e., once installed we do not need to give any source to it and all it will produce is electricity.
In this am connecting a shaft of dynamometer with the ferris wheel like structure, and with help of panel using buoyant force, simple gravitational laws and application of fluid mechanics to keep rotating the dynamometer for the production of electricity.
Duration : still working
- Project name : Smart Detector
Description : In this project, I made a manual remote controlled locomotive electrical voltage potential detection machine (robot). I have designed the arms using links and mechanisms and at the same time mounting voltmeters and simple electronics applications for its working.
Duration : February 2008
- Project name : Touch Detector
Description : In this project, I prepared a simple electronic circuit on the P.C.B. board using resistor, capacitor, oscillator, and a speaker.
Duration : October 2004
- Project name : Selection Procedure For The Supply Chain
Description : In this project, I have done an analyses and study for the methods of selection of supply chain.
Duration : June 2011
Hobbies: Animation film making, Numismatics, Philately, Photography, Reading, Writing

[Guest]

APPLICATION
JIGAR.D.SONI
EMAIL ID :- jigarengg.09 AT gmail.com
TO,
Respected Sir,
Sub : Application for the post of B.E. MECHANICAL ENGINEER

Through reliable source I have come to know that there is an exit a vacancy for the above mention position in your firm. I am inspired to write this application. I feel that my education & experience are adequate for the said post.
I assured that you will get satisfaction my duties with honestly & sincerity & hardworking.
Sir, I request you to give me a chance to express my eligibility & prospective career.
Have A Nice Day Sir!
Thanks.
Regards with
Yours faithfully,
JIGAR D.SONI

PERSONAL MEMORANDUM

SONI JIGAR D.
(B.E.MECH)
OBJECTIVE

COURSE : BE in Mechanical Engineering.
INSTITUTE : Government Enginnering College bhuj – 370001
UNIVERSITY : Kutch University
Qualification Year Of Passing Institution Board/
University Percentage Remarks
B.E. Mechanical 2009 Government Engineering College Bhuj Kutch University 8THSEM 66.33
7TH SEM 56.75
6TH SEM 63.33
5TH SEM 61.73
4TH SEM 52.13
3TH SEM 50.00
1TH SEM 49.58
Aggragate Final Year Percentage 61.82%
H.S.C 2005 Shri Bhavna Higher Secondary School, Ahmedabad GSHEB 60.44% First
S.S.C. 2003 Shri Sahjanand High School, Ahmedbad GSEB 68.57% First
MAIN SUBJECT IN FINAL YEAR
I.C.ENGINE
SEMINAR :
SEMINAR : AERO TURBINE
PROJECT : ANTI LOCK BRACKING SYSTEM
COMPUTER SKILL :
M.S.OFFICE, BASIC
HOBBIES :
CRICKET, DRAWING, TRAVELLING, READING

EXPERIENCE :
Company Name : Hi-tech Applicator
Place : Vatva, GIDC,Ahmedabad
Manufacturing Product : Teflon Lined Pipes, Fitings & Valve Designation:
- Main activitiy : Production & Production Planning Engineer
- Sub Activity : Purchase,Inspection ,Despatch,Maintainance
Company Profile :
Hi-Tech Applicator is Pipes ,Fittings And Valves Fabrication & Teflon Lined Product Related Manufacturing Company. In This Company 1” To 14” M.S.,S.S.(LikeS.S.304,S.S.312,S.S.316,S.S.316L etc.) Sizes Pipes & Castings OR WPB Fittings (Like Equal Tee,Unequal Tee,Equal Cross, Unequal Cross,Inst. Tee,90 Degree Bend,45 Degree Bend,60 Degree Bend etc.) Fabricated And Lined Its By Teflon Materials (Like PTFE,PFA,PVDF etc.).Injection Molding And Transfer Moulding Used For Lining Of Fabricated OR Casted Fittings. This Products Use In High Pressure flow Of Steam,Hazardus Chemical,Oil, Gas etc.Related Indusries.
Activities :
Related PPC
1. Preparing Mass Production Plan on daily & monthly basis as per the orders received from the customers to achieve the production targets.
2. Planning and ensuring the ready availability of Raw Materials to meet the production requirement and schedule.
3. Effective inventory control.
4. Maintaining Bill of Materials .
5. Execution of Continual Improvement projects for enhancing operational efficiency and effectiveness.
6. Setting standards for per piece production to maintain the manufacturing cost of product.
7. To dispatch the consignment as per the delivery deadlines given by the customers.
8. Implementing new engineering changes in Production.
9. To update the production data.
10. Presenting the status of production in weekly meeting and submit reports of Manufacturing.
11. Imparting technical training to operators and improve their competency level.
12. Any other task assigned by the superior from time to time.
13.Provide Any Types Of Tools And Any Other Requirements Of Workers.
14. Create Sales Order Forecast In PDF And Convert Them To MRP Production And Purchase Orders.
15. To Maintain Minimum Stock Level Of Raw Materials And Complete Products.
16. To Maintain Sampling OR 100% Inspection Depend On Requirements Of Customers.
17. Everyday Maintain Production Planning And Raw Materials Planning Sheet.
18. To Maintain Everyday Running P.I. File And Completes P.I. File.
19. Transfer New P.O. In P.I. And Give It P.I. Numbers In PDF.
20. Communicate With Purchase,Sales,Production,Store,Inspection Department.
21.To Maintain materials standards example #150,DIN,B-Table,C-Table,D-Table,E-Table,F-Table etc.For Flanges And Various Scheduled Seamless Pipes Like Sch.10,20,40,80,100 etc. As Per Customers Requirements.
22. Try to Not Create Any Types Of Breakdown In Production.But It Create I Try To Solve This In Min.Time.
Related production :
1. Everymorning of Running Days Study P.I. & Get Priority of it.
2. Start of day meeting with Workers & give works of All Day with Timing.
3. Reporting of Production Manager about All Day Production & Also Discuss How Will Do Next Day At Every Evening.
4. Raw Materials Handling & Put it At Perfect Location.
5. Extra Raw Materials Hand Over To Store.
6. Maintain Everyday Production Planning.
7. To Provide Materials Which Workers Require.
8. follo-up of required Materials To Store.
9. Any Problem Solve Of Workers Related To Production.
10. Observe Every Department Related To Pipes & Fittings.Example : Fabrication, Metal Finishing, Liner Drawing, Liner Flaring, Teflon Finishing, Testing, Packing etc. And To Provides Every Requirement Of Workers.
Related Inspection :
1. Raw Materials Check As Per Standard And Check By Drawing of Nonstandard Materials.
2. after Eabrication Check Products as Per Drawing.
3. Teflon Liner Check As per Dimensions.
4.100% Ispect of Every Raw Materials & Finish Products.
5. Check of Every Testing Process (LikeHydro Test, Pneumatic Test, Vaccum Test, Spark Test)

[Guest]

CURRICULUM VITAE
Vijay K. Jani

- E-mail : vijayjani55 AT gmail.com
Carrier Objective
________________________________________
Seeking a Challenging and progressive career using my inherent strengths & qualities and to contribute towards the organization goals and prospective.
Industrial Working Experience________________________________________
1. TATA MOTORS, SANAND
Duration : 2 Months
Position : Trainee
Subject : Car Manufacturing
Details : Here I have learnt, how an industry work systematically and what type of process undergo in the industry. The most important thing that I got to know is how automation used effectively and importance of material management.
2. JAY TECH ENGG. CO., BHAVNAGAR
Duration : 6 Weeks
Position : Trainee
Subject : Fabrication Industry
Details : The training period in JAY TECH ENGG. CO. was like learning new things every day. Here I come to know how a manufacturing industry works, a precise execution of work, and many virtues about work and engineering principles.
Professional courses
________________________________________
A certificate course of ASNT approved NDT Level – II
- Liquid penetrate Testing
- Magnetic particle testing
- Ultrasonic Testing
- Radiography Testing
Educational Qualification
________________________________________
Degree University/Board Year of passing Percentage
B.E. (Production) Bhavnagar University 2011 66.15
H.S.C.E G.S.H.S.E.B. 2007 57.60
S.S.C.E G.S.E.B. 2005 67.29
Computer proficiency________________________________________
- MS Office, Language C, Familiar with Internet.
Extra Activities
________________________________________
- Participated in singing in Annual Function in College
- Play piano in college event.

[Guest]

RESUME
PATEL HARDIK HARESHBHAI
EMAIL ID :hardikpatel3700 AT gmail.com

CAREER OBJECTIVE
To make the most of my knowledge & skills for the benefit of an organization in the best possible manner and to enhance my knowledge.
STRENGTHS
Time Management Abilities, Helpful nature, Self confident, Positive thinker, Good Team Member, Honesty, Regularity of work, Ability to work hard, Eager to learn new technologies, Goal oriented, Good Communication Skills, Problem-Solving, Ability to Accept and Learn From Criticism, Working Well Under Pressure.
TECHNICAL SKILLS
Mat Lab, Multisim , Ultiboard , Xilinx, Electronics Circuit Design, Having Studied Subjects of Sketching Drawing & Drafting, Programming in C, Microsoft office, Knowledge of Programming of 8051 in keil, Window XP, Window 07.
ACADEMIC QUALIFICATIONS
Degree/Examination Percentage/CPI Year of Passing University/Board
B.E.(E.C. branch) 7.58(cpi*) June 2012 G.T.U.
H.S.C. (Science) 71.40% June 2008 G.H.S.E.B.
S.S.C. 83.86% June 2006 G.S.E.B.
*cumulative performance index (to be considered on the scale of 10)
*Till 8th semester in Electronics & Communication branch.
PROJECT WORK
Final Year Project
Title : - Content Based Image Retrieval –CBIR
Tool Used : - MATLAB
Description : When one wants search a desire image from the large database, it is difficult and time consuming task. As a solution one needs to go for the method which can solve the above mentioned problem. To resolve this cumbersome task we need to go for CBIR. It is method to extract demanded image from the large database of an images. CBIR is achieved by comparing features extracted from the images themselves. The commonest features used are mathematical measures of color, texture and shape.
Mini Project
Infrared Transmitter and Receiver, Clipping and Clamper, Biquad Filter, Hartley Oscillator, Real time clock (RTC)
DECLARATION
I hereby declare that the above details are true to the best of my knowledge.
Date :
Place : Surat (HARDIK PATEL)

[Guest]

I am fresher mechanical engineer, i want to job in the field of mechanical engineering

[Guest]

I have a Diploma in mechanical. I have 7 years experience in fabrication production. I want to do the job in your industry. I have 3.5 year work in ISGEC YAMUNANAGAR AND DAHEJ Under contractor.

[Unregistered]

NAME PRAJAPATI HIRENKUMAR PRAMODBHAI

i have a 7 years working experience and still continue my job in ELECON ENGG.CO LTD.as a junior engineer.i am handling a machine shop. also i have knowledge of CNC machine like turning center and machining center.i am also cooperating with a planning department.i have passed a B.E. mechanical(pddc) from BVM ENGG.COLLAGE.v v nagar.with 4.41CPI.

[Unregistered]

RESUME :
Objective :
My basic objective is to hone in my skills for comprehensive personality development and be an epitome of trust and reliability in the
corporate world. My prime goal is to understand professional environment and capitalize opportunities.
I am submitting herewith my resume for your perusal and favorable consideration position vacancy.
I am a qualified Bachelor of Engineering (Mechanical Engineering) from Gujarat Technological University;company as production & QC
(Fabrication) Engineer with Q TOP Fabrication Engineering Pvt Ltd(Side Work-Larsen & Toubro ltd,L&T Hazira Manufacturing Complex)
since Jan'2014 to May'2016.

Currently spearheading as a NDT & QC ENGINEER with Canaan engineering pvt ltd ,at our Factory, Survey No. 278, Paiki131/132,
Manor-Wada Road, Village Aamgaon, Taluka Wada. District Palghar.since May'2016.

Key Role :
** Raw Material Inspection Of Job
** Stage Wise Inspection Of Job
** Making Inspection Report
** TPI Inspection
** Making Documentation At Every Stage
** QAP Preparation

DIPAK HADIYA
Contact number : 9638100988