BHEL Noida Recruitment 2009 : Mechanical, Civil, Control Instrumentation Engineers

Closed Thread
Results 1 to 2 of 2
  1. Post Count Number #1
    Site Admin
    Join Date
    April 17th, 2008
    Location
    Europe
    Posts
    11,588

    BHEL Noida Recruitment 2009 : Mechanical, Civil, Control Instrumentation Engineers

    BHARAT HEAVY ELECTRICALS LTD. (A Govt. of India Undertaking)
    Power Sector: Project Engineering Management
    Plot No. 25, Sector: - 16 A, NOIDA-201301 (UP)
    Telephone: 0120-4368512/16, Fax: 0120-4329027

    BHEL, the country's premier engineering organization and one of the NAVRATNA PSU, catering to core sectors of Indian economy viz Power Generation, Transmission, Industry, Transportation, Telecommunication and renewable Energy, requires engineering professional for its Project Engineering Management Division at Noida (UP). Discipline - wise requirement is given below:

    Total number of posts : 20

    QUALIFICATIONS:
    Full time Bachelor’s Degree in Mechanical/Chemical/ Electrical/ Electronics/ Control and Instrumentation/Power Engineering from a recognized Institute, with minimum 65% marks in aggregate. Post graduate Degree in Power Engineering will be added advantage to the candidates.

    The required experience should be with reputed organization engaged in engineering of Thermal Power Plants of minimum rating of 100 MW/ Unit. The organization should have completed engineering of a minimum of 2 thermal power plants of 100 MW/Unit or more during the last 5 years. The organization should also be certified under ISO 9001-2000. Experience in organizations doing engineering of other Heavy Industrial Plants such as Petrochemicals and Gas Nuclear & Hydro Power Plants may also be considered.

    SPECIFIC DISCIPLINE-WISE WORK EXPERIENCE LARGELY IN FOLLOWING AREAS:

    MECHANICAL
    • Proposal/Basic/Detailed Engineering for Thermal Power Plants in the areas of Plot Plan & Main Equipment Layout for Power Block, Piping Plans & Isometrics, Stress Analysis and Hanger Engineering. Familiarity with drafting packages like AUTOCAD is essential. Exposure to National/International Piping and Valves Standards is necessary. It is desirable to have exposure to knowledge of latest 3D modeling tools, preferably PDMS and Stress Analysis Package like CAESAR etc.
    • System Engineering of Power Cycle Systems, Water System Engg. including procurement engg. of associated equipments viz Cooling Towers, Pumps etc.
    • Coal Handling Plant, Ash Handling Plant, Limestone Milling & transportation System, HVAC, Fire Protection Systems, Compressors, Cranes, Elevators, Water Treatment Plants, Waste/Sewage Treatment Plants.

    ELECTRICAL
    Proposal/basic/detailed/procurement engineering and site support activities for thermal power plants in the functional areas of electrical equipment selection and sizing, generator and transformer protection, AC auxiliary system protection, electrical controls, and layout, cabling and grounding etc. The design activities include preparation of design documentation/ calculations, schematic layout drawings, cable schedules and interconnections, and relay setting calculations. Procurement engineering activities include preparation of technical specifications, technical review of offers, and vendor document review.

    The equipment and systems include
    •Power and Distribution Transformers
    •11kV, 6.6kV, 3.3kV and 415V Switchgear
    •Isolated/Segregated/Non-Segregated phase busducts
    •Generator Circuit Breaker
    •DC Batteries and Chargers
    •Cables and Cabling
    •Grounding and Lightning Protection
    •Lighting System
    •Standby Supply System [DG]
    •Communication System
    •Cathodic Protection System

    Persons having similar experience as above for large process industries such as refineries, petro-chemical complexes, etc. may be considered if found suitable. Experience of working on PDMS/ PDS, AUTOCAD and ETAP is desirable and shall be added advantage to the candidates.

    CONTROL & INSTRUMENTATION
    • Instrumentation: Preparation of specification datasheets, Quality requirements and knowledge of relevant standards.
    • P&ID engineering
    • Control and measurement schemes, drive lists, signal lists etc.
    • Technical Evaluation of Control Valves and Flow Devices
    • DCS, PLC configurations and their applications.

    CIVIL
    • RCC Designs of super structures, open foundations, pile caps.
    • Structural steel design of Power House Bldg/Mill Bunker Bay.
    • Design of tall Chimneys of heights 220 m and above.

    PROCESSING FEE:
    A crossed demand draft for Rs.250/- for General and OBC candidates in favour of “Bharat Heavy Electricals Ltd., Payable at Delhi should accompany the application. (Write Name, Serial No., Position, Grade & Discipline applied for on the reverse of demand draft).No processing Fee is applicable for SC/ ST & Physically Challenged candidates

    MODE OF SELECTION:
    The mode of selection of candidates shall be personal interview. However, if the number of eligible applications received for a particular position in excess of 1:10 to the no. of vacancies, Written Test shall be conducted only for the purposes of short listing candidates in the ratio of 1:3 for being called for interview, on the basis of their Written Test marks. In the event of receiving good response of applications the maximum no. of candidates to be called for written test will be in the ratio of 1:20 to the no. of vacancies.

    HOW TO APPLY:
    Applications strictly in the prescribed format (can be downloaded from www.bhel.com or www.bhelpem.com) duly filled in and completed in all respect along with the self attested recent passport size Photograph pasted on the application and photo copies of all educational qualifications, date of birth, mark sheets, experience, caste /community certificate, attested by gazetted officer should be sent through speed post / courier to

    Sr. Manager (HR),
    BHEL / Power Sector,
    Project Engineering Management,
    Human Resources Department,
    PPEI Building,
    Plot No.25 Sector: - 16 A,
    NOIDA-201301 (UP),

    so as to reach latest by 16.11.2009. The envelope should superscribe, Serial No, Position, Grade & Discipline applied for.

    Download application from :
    http://www.bhelpem.com/data%5Crecrui...fessionals.pdf

  2. Post Count Number #2
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    The submitted value of field named "Name :" is:
    RAMESH
    -------------------------------------------------------
    The submitted value of field named "Email :" is:
    eragoniramesh AT gmail.com
    -------------------------------------------------------
    The submitted value of field named "Designation / Name of the Post / Skill Set" is :
    QCchemist &Instrumentation
    -------------------------------------------------------
    The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
    -------------------------------------------------------
    CURRICULUM VITAE
    E.RAMESH
    Career Objective :
    To employ my skill and talent with high orientation, to excel in the field of Quality control through a challenging career in a leading edge organization that will provide constant opportunities for growth and advancement.
    Work Experience :
    - Present working in CHEMINNOVA REMEDIES (Hyd) in Quality Control department, from MAY-2009 to till date.
    - Handling of HPLC(waters Empower2 soft ware),UV, and Moisture Analyzer.
    - Handling of FT IR,Dissolution & Disintegration Apparatus.
    - Calibration of HPLC,UV and Polarimeter, Moisture Analyzer.
    - Preparation of all Volumetric Solutions & Reagents.
    - Standardization of all Volumetric Solutions.
    - Maintaining of all QC related records and their documentation work.
    - Analyzed formulated preparation like TABLETS / LIQUID ORALS.
    Instrumental Access :
    - HPLC (waters Empower2 soft ware) Waters (e2695)
    - Ultra violet –Visible Spectrophotometer Shimadzu. (UV1601)
    - FT-IR(KBr press) Brucker (Alpha-T)
    - K.F Apparates Polmon
    - Polarimeter Polmon
    - Disintegration Apparatus Electro lab
    - Friabilator (USP) Electro lab
    - Dissolution Apparatus Electro lab
    - Ph meter Polmon
    CHEMICAL ANALYSIS :
    - Analyzed several types of Raw materials as per IP, BP, USP and etc., and formulated preparation like TABLETS / CAPSULES / LIQUID ORALS AND DRY POWDERS.
    - ACADAMIC DECLARATION :
    - M.Sc (Organic Chemistry) from Nagarjuna University (NALANDA P.G college. VJA), (2007- 2009).
    - B.Sc from Kakatiya University (C.K.M College Warangal), A.P. (2002-2005
    Personal strength :
    - Quick in Learning New things
    - Energetic, Proactive in identifying & solving problems
    - Enjoy working in Team environment ,adaptable, self motivated

    Declaration :
    I hereby declare that the above written particulars are best of my knowledge and belief.
    Date :
    Place : (E.RAMESH)
    -------------------------------------------------------
    More Information about this submission and submitter :-
    ___________________________________________________
    Submission ID : 4089033
    Date & Time : 5th May 2011 9:56 AM (UTC)
    IP Address : 122.169.181.5
    Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; BTRS26718; InfoPath.2)
    Predicted Country : India