www.ramboll-oilgas.com Ramboll Oil & Gas India Chennai : Piping, Instrument, Electrical, Structural, Risk Safety, Pipeline Disciplines

[mskavi]

Ramboll Oil & Gas India Chennai : Piping, Instrument, Electrical, Structural,Risk & Safety,Pipeline Disciplines
Website: http://ramboll-oilgas.com
ramboll-oilgas.com

Designation: Required Senior Engineers and Designers

Job Description:
Require Senior Engineers and Designers in Process / Piping / Instrument / Electrical / Structural / Risk & Safety / Pipeline Disciplines.
* Candidate should have ability to work in a multi-discipline team
* Should have an out-going personality, are independent, and can take on responsibility.

Desired Candidate Profile:
* Relevant Degree/Diploma in Engineering
* Minimum 5 -10 years of relevant experience
* Ability to work in a multi-discipline team
* Effective written and oral English skills
* Self starter, proactive participant
* have an out-going personality, are independent, and can take on responsibility

Address:
N0.481, 2nd floor,
Anna salai, Nandanam,
CHENNAI,Tamilnadu,India 600035

Email Address: gzm@ramboll.com

[vishnukumar]

M.VISHNUKUMAR
No:1052,LIG-II MAIL ID : Vishnu_eee1711 AT yahoo.in
29th street, MOBILE : 9789872112
Avadi,
Chennai-600054

OBJECTIVE:
To work effectively in a challenging and creative environment and contribute towards the goals of the organization.

EDUCATIONAL PROFILE:

Examination / Discipline School / college Board / University Year %

B.E(Electrical and Electronics) Saveetha Engg college, chennai Anna
University 2008 63%
H.S.C. Vidhya Vikas Higher Sec School,Thiruchengode State
board 2004 83%
S. S. L.C St joseph A.I Boys Higher Sec School,Chennai Anglo Indian 2002 74 %


WORK EXPERIENCE:
compeleted Apprenticeship Training in TNEB/MRT/WEST/CHENNAI (TamilNadu Electricity Board)

Work Experience of Current employment:
o 110 / 33/ 11 KV Substation maintenance
o Relay, Circuit breaker and Transformer panel wiring
o New Relay,breaker,Current Transformer, potential transformer and Power Transformer Testing
o Maintaining and Attending faults in Relay, circuit Breaker, Current Transformer, poten-tial Transformer and Power Transformer in Substations
o Checking power consumption and power factor in Industries

AREA OF INTEREST:

o Protection & Switch Gear
o Power System Analysis

COMPUTER PROFICIENCY:

o Diploma in Systems and networking(Certified by NIIT)


INDUSTRIAL VISITS:

o Visited Nuclear power plant in Kalpakkam, Thermal power plant in Ennore.

ACADEMIC PROJECT:

Title: Web based wirless target detection robot


PERSONAL PROFILE:

Name : Vishnukumar.M
Father’s Name : Murugesan.G
Father’s Occupation : Business
Sex : Male
Marital Status : Single
Nationality : Indian
Languages known : Tamil & English
Date of Birth : 17-11-1985
Hobbies : Hearing songs and playing cricket

DECLARATION:
I do hereby declare that the particulars of information and facts stated above are true, correct and complete to the best of my knowledge and belief

Place: Name: Vishnukumar.M
Date: Signature:

[Guest]

DAYALAN.K

Mobile : 91-9551499340
Dayalan_k82 AT yahoo.co.in

Dayalank82 AT gmail.com
OBJECTIVE
To take up a challenging position in your esteemed organization where my knowledge and skills would be of value.
EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering (June 2001 to April 2003)
Sri sairam polytechnic college, Chennai.
EXPERIENCE SUMMARY
· Having 6+ years of experience in Design of piping Engineering for oil & gas.
WORKING SKILLS
· AutoCAD 2004 to 2010
· Micro station
· Plant Design System (PDS)
WORKING PROFILE - 1
Organization : ACCUSPEED ENGINEERING DESIGN SERVICES LIMITED, CHENNAI -600 020 (Deputation to Technip Inida Limited )
Designation : PIPING DESIGNER
Period : APRIL 2010 TO MAY 2010
Application Software : AUTO CAD.
WORKING PROFILE - 2
Organization : GULF SPIC GENERAL TRADING & CONTRACTING COMPANY W.I.I
FAHAHEEL, KUWAIT.
Designation : PIPING DESIGNER
Period : FROM AUG 2009 TO APR 2010
Application Software : MICROSTATION, AUTO CAD 2010.
Project Involved
Ø Kuwait oil company (KOC) :
GC 25 – North Kuwait
GC 19 – East Kuwait
GC 07 - South kuwait
Ø Kuwait National petroliem company (KNPC) :
CS 1903 - South kuwait
Responsibilities
o Preparation of General Arrangement Drawing.
o Creating of 3D model for piping.
o Preparation of Part Drawings.
o Material Selection and Preparation of Bill of Materials.
o Conversion of Isometric Drawings from Layout.
o Preparation of As-Built Drawing.
o Preparation of Layer Change GAD & Isometric
WORKING PROFILE - 3
Organization : SRI KAMATCHI CONSULTING ENGINEER, CHENNAI -600 040 (Deputation to Petrofac Engineering Services India Private Ltd).
Designation : PIPING DESIGNER
Period : JULY 2008 TO APRIL 2009
Application Software : P.D.S, MICROSATION, AUTO CAD.
Responsibilities
v Creating of 3D model for piping.
v Understanding Client Requirements, Package study.
v Preparation of Piping Layout and Schematics.
v Preparation of General Arrangement drawings.
v Preparation of Piping Isometrics.
v Preparation of Equipment Fabrication Drawings.
v BOM Preparation and Drawing release.
v Preparation of Piping Support Drawing
v Preparation of Data Sheets
Project Involved
Ø Jihar stage-3 project.
o Preparation of Piping Layout and Schematics.
o Preparation of General Arrangement drawings.
o Preparation of Piping Isometrics.
o Preparation of Equipment Fabrication Drawings.
o Preparation of P&ID.
Ø Abhudhabi sas full fields development project
o Preparation of General Arrangement drawings.
o Preparation of Piping Isometrics.
o Preparation of Bill of material
o Preparation of Piping Support Drawing.
WORK PROFILE – 4
Organization : JK ENGINEERS AT CONSULTANCY.,
Chennai-600 087.
Designation : PIPING DRAFTSMAN.
Period : OCT 2004 TO JUNE 2008
Application Software : MICROSTATION, AUTO CAD.
Clients : QWMS (Chennai),
Avant garden (Chennai)
Responsibilities
o Preparation of Piping Layout and Schematics.
o Preparation of General Arrangement drawings.
o Preparation of Isometric drawings for Fabrication and Erection
o Material Selection and Preparation of Bill of Materials
o Conversion of Isometric Drawings from Layout.
o Schematic Diagrams, Electrical Layouts & Panel Board Diagrams
o Preparation of Piping Support Drawing
o Preparation of Data Sheets
PERSONAL DETAILS
Date of Birth 21-07-1982.
Father’s Name B. KARNAN
Martial Status Single
Nationality Indian
Passport No AT expiry Date H3061487 & 07/04/2019
Language Known English, Tamil
Address for Communication No. 123/1, C.P.W.D QUARTERS,
K.K NAGAR,
CHENNAI- 600 078.
Tamilnadu, India.
Place : CHENNAI. Yours Faithfully
K.DAYALAN.

[Guest]

CURRICULUM VAITE
J.Y. RAMA SARMA
Email : josyulasarma_2k.yahoo.com; jyrsarma AT gmail.com
__________________________________________________________________________________________
Carrier Object :
I can claim to have initiative, duty and preference for hard work and assure that I will demonstrate my skills confidently on any job assigned to me and wish to become a reliable member of group.
EDUCATIONAL QUALIFICATIONS :
- Diploma in Draughtsman (Mech.) (ITI) - 1984

EXCENLENT COMMAND SKILLS ON :
- Auto CAD
- M.S. Office
- Micro Station
- Tekla Structures (Basics)
WORK EXPERIENCE :
- Checking and Drafting of Steel Structural & Mechanical drawings in Auto-cad & Micro station.
- Review of Design drawings & Generation of 2D Detail and Assembly Drawings of Mechanical as per Engineering standards.
Off-shore Platforms :
Preparation of Fabrication drawings for Offshore Projects FPSO Vessel, Boat landing platforms etc.
Detailing of Primary and Secondary Beams, Plating, Grating, Equipment Supports, Handrails, Stair
cases, Pipe Supports, Nesting and Weld Maps.
Longitudinal Barge & Transverse Barge :
Floating barges; Detailing of Bottom Plate, Top Plate, Middle Plate, Frames, Bulk Heads, Side shell,
Man ways, Top sides consisting of Beams, Grating, Support Members, Man Holes, Ladders, Handrails,
Bumper System arrangement.

- Layout drawings for Steel Structural and Mechanical like Plant Piping Layouts, Isometrics etc.
- Preparation of Bill of material, Parts list etc. in MS-Office
- Co-ordination in Prototype Development etc.
- Interaction with design consultants for prototype developments.
- Worked as ‘Onsite co-ordinator’ in Dubai at M/s Lamprell Energy Limited.
- Worked in Ahmed Mansoor Ala-ali, Bahrain as Sr. Draughtsman (Mech.)
PRESENT EXPERIENCE
- Duration : from May 2011 to to date
Working as CADD-Supervisor in Designs Department in M/s S.A. KENTZ Company Ltd. (EPC) An ISO company, Saudi Arabia, Alkhobar.
Nature of work : Study of specifications for Mechanical equipment, Checking & Preparation of GA and Detail drawings & Layouts for Piping, Isometrics etc. Handling the team of CAD Operators.
Software : Auto Cad, Micro Station, MS Office.
Project : KEMYA, LLDPE PROJECT, Sea water pipe lines (Supply & Return)
PAST EXPERIENCE
- Duration : from Dec 2009 to to May 2011
Worked as Sr.Engineer in Designs Department in M/s IVRCL Infrastructures and Projects Ltd. An ISO 9001 :2000 company, Hyderabad, are the EPC contractors for turnkey projects.
Nature of work : Tender Study, Study of specifications for Mechanical equipment, Getting offers from Suppliers by sending specifications, preparation of comparative statements. GA and Detailing of Pumping stations, supporting structures, Isometrics etc.
Software : Auto Cad, MS Office.
- Duration : from May 2008 to to Dec 2009
Worked as Sr.Engineer in Steel Structural Department in M/s Avineon India Pvt. Ltd. An ISO 9001 :2000 company, Hyderabad, are the Design consultants for Offshore projects & GIS.
Projects :
Software : Auto Cad
-Daifuku International (US) : Steel Platforms for Automobile manufacturing workshops.
Software : Tekla Structures
-Dubai International Airport : Steel Staircases and supporting platforms.
-Changi Terminal (Singapore Airport) : Steel Platforms, Dog Houses.
-Wafer Building (Steel) : Level-2 total platform (Contains Primary, Secondary beams, Trusses,
Walkways).
Nature of Work : Checking of model, GA, Assembly and Single Part drawings. Raising queries to client.

- Duration : from April 2007 to April 2008
Worked as Sr. Draughtsman (Mech.) in M/s Ahmed Mansoor Al-A’Ali Co. BSC, An ISO 9001:2000 company, Bahrain, this company is mainly dealing with Piping & Structural construction and maintenance of Offshore projects.
Main Clients : BAPCO (Bahrain Petroleum Corporation), Alba (Aluminium company of Bahrain)
Checking and Detailing of fabrication drawings relates to Primary Steel members (Plate Girders,
Box Girders, Pipes, Pipe Braces, Built-up Columns, and Rolled Sections), Tertiary Steel members
(Pipe profiles, Angles, Plates), revisions (made as per shop requirement, changes in design), As-built
drawings, Weld Maps and Bill of Materials.
- Duration : from November 2004 to April 2007
Worked as Sr. Structural Detailer/Checker in M/s Ramtech Corporation, An ISO 9001:2000 company, Hyderabad, are the Design consultants for Offshore projects. (Lamprell, Dubai), Mecdermett (Baku))
Structural:
-Off-shore Platforms :
Preparation of Fabrication drawings for Offshore Projects FPSO Vessel for Enfield Turret; Boat landing
platforms etc.

Detailing of Primary and Secondary Beams, Plating, Grating, Equipment Supports, Handrails,
Stair cases, pipe supports, Nesting and Weld Maps.
-Longitudinal Barge & Transverse Barge:
In this aspect covered drawings related to Transportation barges for Agip-Saipem, Kazkistan; Jack-up
Rigs & Land Rigs; Floating barges;
Detailing of Bottom Plate, Top Plate, Middle Plate, Frames, Bulk Heads, Side shell, Man ways, Top
sides consisting of Beams, Grating, Support Members Man Holes, Ladders, Handrails, Green Water
Walkways, Handrails, fenders, Bumper System arrangement, Nesting, and related weld maps etc..,
-Columns
Detailing of fabrication drawings relates to Primary Steel members (Plate Girders, Box Girders, Pipe Braces, Built-up Columns, and Rolled Sections)
Riser column ring stiffeners, circular platforms, cones and shells.
Detailing of plates, stiffeners, brackets, pipes and stair cases.
- Duration : from August 1998 to 2004
Worked as ENGINEER (Engineering & Documentation) in M/s Speck Systems Limited, An ISO 9001:2000 company, Hyderabad, are the manufacturers of Digital Photowriters used for defence, remote sensing and commercial graphic applications.
- Duration : from 1996 to 1998
Worked in M/s Visaka Cement Industry Ltd.,Tandur as Sr. Draughtsman (Mech.) The job involved in checking of Drawings received from various consultants and suppliers, erection and follow-up. Preparing drawings from the site by taking dimensions from actual objects.
- Duration : from 1991 to 1996
Worked in M/s A.R.M., Hyderabad as Cad Operator (Mech.). The job involved in designing and preparation of detail and assembly drawings of Control Panels, Towers, Masts etc. and layout drawings, preparation of Bill of material.
- Duration : from 1989 to 1991
Worked in M/s TEKCONS (Design Consultants) as Draughtsman (Mech.). The job involved in preparation of detail and assembly drawings of SPM machines, Proposal drawings etc. and layout drawings.
- Duration : from 1988 to 1989
Worked in M/s Proctor & Gamble India Ltd as Draughtsman (Mech.). The job involved in preparation of existing machinery layouts and new proposed machinery of automatic bottle filling, tin filling machines and maintenance of drawing office.
- Duration : from 1986to 1988
Worked in M/s HANVE ENGINEERS (Design Consultants), Hyderabad as Draughtsman (Mech.). The job involved in preparation of detail and assembly drawings of SPM machines, Proposal drawings etc. and layout drawings.
- Duration : from Apr 1985 to Mar 1986
Apprenticeship Training in M/s Electronics Corporation of India Ltd. Job involved in drafting of mechanical part drawings, Assemblies and layouts etc.

[Guest]

Raj Kumar.P
E-mail :jrk08 AT yahoo.com

OBJECTIVE
Seeking a position to utilize my skills and abilities in the industry that offer security, professional growth while being resourceful, innovative and flexible through my hard work and good ethics.
PROFESSIONAL SUMMARY :
- 6 years of experience in working as Draftsman.
- Physical verification of drawings as per site condition & 2D and 3DModeling, drafting, designing, printing & plotting.
- Preparation of structural, piping & machine equipments.
- Preparation of spool drg of all types Mechanical according to routing, installation & creation of bill of materials for piping fabricated.
ACADEMIC PROFILE
Diploma (DTE) (April2006) PSB, Polytechnic College
Kelambakkam-603103
HSC (April2004) Blessings Metric Higher Secondary School
Keerapakkam-603109

#Diploma – Elective
1. Control of Electrical Machines.
2 Computer Hardware & Services

SOFTWARE SKILLS

Designing
- AutoCAD 2004
- PLC
2D and 3DModeling, drafting, designing, printing & plotting
Current Profile :
Experience : 1 year & 6 months
Company : TATA Consulting Engineers Ltd. Chennai.
Place : Department of Atomic Energy (FRFCF)
Designation : Draftsman
Previous Profile :
Experience : 1 year & 6 months
Company : TechnoFab Engineers Ltd. Delhi.
Place : NPC - BHAVINI (PFBR)
Designation : Draftsman
Previous Profile :
Experience : 10 months & 1 year
Company : Tech Sharp Engineers Pvt. Ltd. Chennai &.
: Avasarala Technologies Ltd. Bangalore.
Place : Department of Atomic Energy (DFRP - IGCAR)
Designation : Draftsman
Previous Experience :
Experience : 4 months & 9 months
Company : Space control Engg &Excel Engineering. Mumbai.
Place : Kalpakkam Reprocessing Plant (BARCF)
Designation : Supervisor & Draftsman.
PERSONAL STRENGTHS
- Good interpersonal & communication skill.
- Willingness to learn, Team facilitator.
- Ability to withstand pressure & to deal with people diplomatically.
- Quick adaptability to new technologies.
- Effective leadership at the same time, a good team player
------------------------------------------------------------------
I hereby declare that the information furnished above is true to the best of my knowledge and belief.
Place : Kalpakam
Date : (P.RAJ KUMAR)