www.jindalsaw.com Jindal Saw Ltd Mundra Gujarat : Ductile Cast Iron Pipe Plant Maintenance Engineer

[mskavi]

Jindal Saw Ltd Mundra Gujarat : Executive - Maintenance (Ductile / Cast Iron Pipe Plant)
Website: http://www.jindalsaw.com
jindalsaw.com

Designation: Executive - Maintenance (Ductile / Cast Iron Pipe Plant)

Job Description:
- Responsible for operation and maintenance of utility equipment
- Responsible for operation and maintenance of compressors and pumps including steam injection system.
- Responsible for Maintenance of Cooling Towers, Chiller & LPG Yard

Desired Candidate Profile:
- Candidate should have exposure of maintenance in Ducticle iron / Cast iron pipe Plant
- He must have capability to handle separate shift and manage Man, Machines and Material in best effective way.

Address:
Jindal Centre,
12 Bhikaiji Cama Place,
New Delhi 110066
Phone: +91 (11) 26188345, 26188360-74
Fax: +91(11)26170691

Apply online

[Guest]

Sir,

i am mechanical engineer. To associate with an organization which progress dynamically and gives me a chance.To update my knowledge and enhance my skills in the state of the new technologies and Be a part of the excels in work towards the development of the organization and give me Satisfaction thereof.

Regards
Bhavesh Patel.

[Guest]

SHASHI BHUSHAN SAHU
E-mail : bhushan17241 AT gmail.com
Objective
To secure a challenging job that fulfils my potential as a hard worker and uses my technical expertise.
Education
B.E (2006-2010)
Discipline : - Industrial and production Engineering.
College : - ITGGU, Bilaspur
2006-2010 Institute of Technology
Guru Ghasi Das Vishvavidyalaya (Central University), Bilaspur (C.G.)) BE
Industrial and Production Engineering CGPA 7.04/10
2006 Chhattisgarh State Board Higher Secondary School Education 64.6%
2004 Chhattisgarh State Board High School Education 57.57%
BE Project
Disc Turbine (Bladeless Turbine) : – Unlike the other traditional turbines having blades, the Disc Turbine does not have any blade and does not restricted to require a specific type of working fluid. It can be driven by many types of fluids.
Disc Turbine works on four basic principles
- Principles of Adhesion.
- Principles of Viscosity.
- Principles of Boundary Layer Theory.
- Principles of Centrifugal Force.
Experience
Six month experience in G R Metallic Industry pvt Ltd, Siltara, Raipur in a process Dept.(furnance)
Technical Skill
- South Eastern Central Railways (SECR ), Bilaspur (C.G.) : 45 days training at Railway workshop in Maintenance, Inspection.
- ¬3 days training of Entrepreneurship Programme.
Personal skill
- Punctual, quick learner, hardworking, self-motivated individual. Active participation in school activities.

[Guest]

I md qaleq ur rahman mechanical engg did m tech in maintenance engg
forwarding my resume for employment.
MD QALEQ UR RAHMAN
E-mail : qaleeq_51 AT yahoo.com
Career Objective :
To pursue highly challenging ventures where I can contribute to the organizational goals there by simultaneously acquire new technical skills, contribute constructively and with the fullest utilization of my educational background to match the organization’s growth and strength.
Educational Qualifications :
Graduation in “MECHANICAL ENGINEERING”
Post Graduation in “maintenance engineering”
EXPERIENCE
0ne year on campus experience in automotive company in maintenance department.
Academic Qualifications :
Name of the Institute Qualification Board/University Duration % Of marks
Sri jayachamrajendra college, Mysore MTECH* Vishveshwariah
Technological University
2009-2011
76.2%
Poojya doddappa appa college, gulbarga
B.E (ME)
Vishveshwariah
Technological
University
2005-2009
63.7%
Guru nanak college bidar/Pre university Board, Karnataka
12th Std State Board of Secondary Education
2004-2005
64.53%
Guru nanak school, bidar/Secondary Education Board, Karnataka
10th Std State Board of Secondary Education
2003-2004
74.96%
Strengths
- Sincere and a Hard Worker with a high level of Integrity.
- Committed to deadlines and schedules.
- Good team player.

[Guest]

Curriculum-Vitae
Shivam Vankar h.
(Dip. Mechanical Engineer)

vankarshivam AT yahoo.com

OBJECTIVE :
To get an opportunity in your company that will allow me to apply and enhance my skills of being a Mechanical Engineer.
In addition, I am eager to contribute my creativity and hard work towards the success of the company and to the growth of the fast developing field.
EDUCATION :
10th March 2008
Sheth Shri V.D.High school, Bhuj
Percentage :- 80.62%

Mechanical Engineer (Dip. Mech.) May 2011
K.D.Polytechnic, Patan
CGPA(CPI) :- 7.46 (Overall)
ACPC(CPI):-7.4556

[yogesh parmar]

CURRICULUM VITAE
Yogesh T. Parmar
Email : yparmar5 AT gmail.com



CAREER OBJECTIVE :
- To obtain any position where my skills, talent and technical knowledge are best utilized which helps me and my organization to grow dynamically.
EDUCATIONAL QUALIFICATION :

Institute : S'ad vidhya mandal institute of technology Bharuch,
Veer narmad south Gujarat University, Surat B.E. :- Mechanical Engineering
LEVEL BOARD/
UNIVERSITY YEAR OF PASSING PERCENTAGE
CLASS
B.E VNSGU
May-2010
67.45%

DISTICTION
HSC GSEB
March-2006
63%
Merit
FIRST
SSC GSEB
March-2004

75.57%
DISTICTION
WORK EXPERIENCE :

- KOHLER INDIA PVT. LTD.
Jhagadia GIDC,
Bharuch
Gujarat
- Duration : From 5th August 2010 to 5th August 2011 -Management trainee
From 5th August 2011 to present – Maintenance Engineer
ROLES AND RESPONSIBILITIES :

- To implement safe working environment as per safety standards of KSMS
- Analysis of repetitive equipment failures
- Monitoring and controlling maintenance work
- Manpower management
- Planning and scheduling planned and unplanned work
- Controlling maintenance tools, spares, and equipment
- Directing, instructing and supervising maintenance technicians and fitters.
EQUIPMENTS HANDLED : Utilities equipments like Screw compressor , Non IBR boilers, hot water generators, Vacuum Pump, Centrifugal, Gear pumps with gland as well as Mechanical seal type, Rota-pumps , Tunnel Kilns, , Screw conveyors , Blowers , Belt Conveyors ,Vibro-seives , Roller conveyors , Packing m/cs , etc..
Erection and commissioning of equipments like exhaust blower,vaccum test m/cs,smoke test m/cs and inspection booths.etc..
TRAININGS :
- “Industrial Safety & Health” from DPMC,Fire station,GIDC,Ankleshwar
- “Fundamentals of bearing Maintenance” from SKF
ACADEMIC PROJECT :
- AIM : - “Vibration analysis of uniform turbine blade using FEM approach”.
COMPUTER LITERACY :
- AutoCAD & Pro/E
- I am leading MP2 software implementation for Kohler India plant and responsible for managing all data of equipments like spares, PM task, equipment inventory, Operator trainings, down-time in this software in consultation with Kohler Maintenance Management system ( KMMS) team sitting at USA head-office.

[Guest]

RESUME

e-mail-viroo_ash AT yahoo.com
Virendra singh yadav
Carrier Objective
I would like to pursue a challenging career in my life, I am ready to take up challenges of the job, and I earn with it & work to my full potential for the growth of my organization & self.
Carrier Summary :-
Around 10 years experience in industrial maintenance, Utility and production Work. Involved in manufacturing of Colour Picture Tube, maintenance of wire weaving machines, modifying & revalidating the machine.
Professional Experience :-
Presently working in Mechanical maintenance in saudagarmal mammanlal pvt Ltd. Is an ISO : 9001 certify company manufacturing wire mesh, gabion box, chainlink fencing at banmor distt. Morena (M.P.) as a sr. Engineer from Feb. 2007 to till date.
Worked in Utility in Hotline CPT ltd. Approx 2.5 year and worked in production in Hotline CPT ltd. Approx 3.0 year at malanpur distt. Bhind (M.P.) as a asst. engineer from dec 2001 to Feb 2007.
Worked in Utility Cardinal Drug ltd. at malanpur distt. Bhind (M.P.) as a trainee Engineer (drugs /madicines Manufacturer) from Feb 2001 to dec 2001.
Saudagarmal mammanlal :-
Knowledge of maintenance of hexagonal weaving machine, chain link fencing machine, power loom (fine wire mesh) machine, fork lift, hydraulic press, wire straightening machine, flattening machine lathe machine, shaper machine, drilling machine and look after production of the plant.
Job Responsibility :-

Managing the Maintenance activities such as Preventive /Breakdown /Predictive /Routine Maintenance as per ISO 9001 .
To make the schedule of preventive maintenance.
To look after breakdown of the machine.
To make the history of the machine breakdown.
To analyze the problems according to the history of the breakdown.
Hotline CPT :-
Knowledge of operation & maintenance of boilers, pumps, chilling plant, water treatment ( as DM WATER, SOFT WATER ) Boiler : Oil Fired Boiler having capacity up to 4 Tones per hours at 10. kg/cm2.Compressors: Screw & Reciprocating type Compressors having capacity up to 960 cfm.
Knowledge of assembly of picture tube with large quantity conveyorised assembly operation, yamming of picture tube with conveyorised auto yamming operation & manually also, improvement of landing rank quality in CPT, R/B/G convergence measurement method in horizontal and vertical, gauss margin effect to CPT, process defect in CPT, electron gun related problem in CPT.
Job Responsibility :-
To make the schedule of preventive maintenance.
To look after breakdown of the machine.Overall manpower administration in department independently.
Responsibility of checking all the screen defects & Electrical problems ( Stray, MIB, Delta MIB, K/F ) of CPT.
Responsibility for production to achieve target yield and process troubleshooting interacting with Q.A. & maintenance.
Responsibility for daily MIS (Management Information Sheet) And Monthly WIP (Work In Progress) report.
Developing checking sheet for continual improvement.
Scheduling & working on the calibration of process effective instruments like machine voltage & current, gauss, power supply, heat process voltage.
Responsibility for process trouble shooting rejection analysis of area & shift planning.
Preventive trouble shooting & maintenance of machine chucks holdings and rotary parts.
Cardinal drug :-
Knowledge of operation & maintenance of boilers, pumps, chilling plant, water treatment ( as DM WATER, SOFT WATER )
Job Responsibility :-
To start the boiler or equipments according to the plan.
To provide utilities like water, vacuums, steam & cooling effect according to requirement.
To do maintenance of the equipments as per plan.
To attain breakdown of the reactors & centrifuge & equipments.
To maintain process parameter and records in the check sheet.

Education Qualification :-
High School from M.P. Board, Bhopal with 59.4% (1995).
Technical Qualification :-
Diploma in Mechanical Engineering as per the rules of M.P. Board of Technical Education with 2 nd division (61%). In 2001
Degree in mechanical engineering – pursuing in final year from MITS COLLEGE ( RGPV) [part time]
Project Undertaken - A major project working model of “Model of inversion of single slider crank mechanism”.
- A minor project “Study on internal combustion engine ”.
Computer Literacy - MS-Office, Networking.

[Guest]

SUNIL KUMAR SINGH
Email :pranjalisksingh AT rediffmai.com
:sksingh_1971 AT yahoo.co.in
OBJECTIVE :-

Seeking an opportunity in my profession for career growth & development by utilizing my
Experience & knowledge in the field of line pipes for oil and gas pipe-lines with the
Attitude in the right time at right place.
CURRENT JOB :-
Presently I am working with in Aum Saw Pipe Industries Pvt. Ltd.visakhapatnam(AP) as a Sr. Manager..The organization is a world leader in manufacturing of Carbon Steel SAW (Submerged Arc Welded) Pipe & Anti Corrosion Coating on the Pipe like Cement, Coal tar, and Epoxy etc. It is accreted with ISO- 9002, ISO-14001& API-5L, 2B and 5CT certification.
WORK EXPERIENCE :-
Company Place Designation Duration Total
United Constructions Co. OBRA (up.) Supervisor June’93 TO
March’96 2.5 Years.
MAN Industries(Ind.) Ltd. Indore
(M.p.) Jr. Engineer March’96 to Aug’97 1.5 Years.
Welspun Gujarat Sthal
Rohren Ltd. Bharuch Sr. Engineer Sept’97 to May 2005 8 Years.
MAN Industries (Ind.) Ltd. Anjar Kutch. Astt. Mgr. May 2005 to May2008 3 Years.
Germenisher Lioyds Industrial Inspection Services Mumbai Dy. Manager May2008 to Sept 2008 0.5Years.
AL Jazira Pipe Industries& Oil Services.Co. UAE Sr.Manager Sept 2008 to June2011 2.5years.
ACADAMIC PROFILE :-
Passed Diploma in Mechanical Engineering ( Plant Engg.) in 1994 with 1st Division.
P.G. Diploma in Business Management & Industrial Relation in 1998 with 1st Division.
Certified Welding Inspector Course in 2006, DPT, MPT, UT & RT ASNT NDT LEVEL-2
Experience with Jazira Pipe Industries & Oil Services Co.LLC.,QC Related Work.
Experience with Germenisher Lioyds Industrial Services.
Post : Dy. Manager
Period : June 2008 ~ Sept 2008.
GLI is an organization dealing with Inspection activities in various projects in oil & gas, refineries, piping, power plants etc.
Major Responsibilities
Inspection & testing of line pipes (API) that comprises from raw material inspection till final dispatch for the Crain energy project
- Process inspection during production.
- Experience of how to satisfy our client. & T.P.I.
- Experience of how to control man power.
- Knowledge of welding.
- Knowledge of hydrostatic testing.
- Preparation of documents as per ISO requirement & customer specification.
- Experience of how to control less consumption of materials.
- Experience of plant Maintenance- break down maintenance, preventive maintenance, annual budget, monthly- costing etc.
Experience with Man industries (I) Ltd.
Post : Astt. Manager
Period : May 2005 ~ May 2008.
Man Industries (I) Ltd. is an ISO 9001,14001 & OHSAS 18001certified Company, accredited with API license for the manufacturing of large dia Spiral Saw Pipes Diameter ranging 16”~72”, Thickness 6.00~19.0 mm.
Major Responsibilities
Effective planning and scheduling to meet pre-set production targets and maximize production.
Planning & scheduling effective preventive/predictive maintenance to enhance equipment reliability and productivity.
Planning implementation & monitoring of technological changes to enhance productivity.
Planning of day to day to production activities.
Productivity Improvement plans.
Planning for Critical Production Spares.
Analysis for the Improvements in areas of Productivity & Recovery.
Looking after production, production planning and product quality.
Overall control of production with emphasis on cost reduction.
Planning of Raw Material, Consumables & Man Power.
Experience with WGSRL (Indo-German Joint Venture Co.)
Post : Sr. Engineer.
Period : Sept.1997 ~ May 2005.
“Welspun Gujarat Stahl Rohren Ltd.” Is an ISO-9002,14001company(certified by LRQA for quality management System & has been approved by American Petroleum Institute), Manufacturing of large Dia . longitudinal SAW pipes Dia. Ranging from 16” to 60”, Thickness Ranging from 6.0mmto 65mm confirming to 5L, 2B &5CT, ASTM,IS. Welspun has set up a state of art saw pipe complex (spiral, longitudinal, coating etc) in Dahej, Bharuch in 1996, and I joined this company in 1997 as a Mechanical Engineer (Maintenance).
WORK AREA :- SPIRAL PLANT
1. Maintenance of Tube mill , Beveling m/c & Hydro-tester m/c
2. Maintenance of Pinch –Rollers, Guide-Roller, Leveler- Roller & Forming rollers.
3.Maintenance of Tool holder post and gear box of beveling m/c.
4.Maintenance of hydraulic Pumps& cylinders ,valves.
5.Maintenance of Conveyors, EOT Crane-25 Tonne, Electric Oven, Plasma Torch,
Hydra Mobile Crane etc.
WORK AREA :- LONGI. SAW PLANT
Erection of Longitudinal Welding pipe plant which includes erection of machine like
Expander, Chamfering Machine, Hydro tester.

Erection and Commissioning of Hydraulic System for Expander, Chamfering Machine,
Hydro tester and Forming Press which includes :
a) Preparing of bill of Material.

b) Installation of piping and valves as per piping plan ,pickling flushing and
Hydro testing of pipe .
3. Maintenance of all types of D.C valves, Pumps & controls .
4. Ability to read and understand Hydraulic circuits.
5. Maintenance of E.O.T. Crane, Lathe Machine, Shaping machine, Boring machine,
Centrifugal Pump, Gearboxes etc.
WORK AREA :-CEMENT COATING
Maintenance of Cement Coating & Lining Millars, Gunniting Machine, Cement Mixer Machine, Air-Motor etc.
Experience with m/s Man Industries (I) Ltd.
Post : Jr. Mechanical Engineer (Maintenance)
Period : March 1996 ~ August 1997
“Man Industries (I) Ltd.” is an ISO-9002, (certified by SGS for Quality Management System & has been approved by American Petroleum Institute), Manufacturing of Large Dia. Longitudinal SAW pipes Dia, Ranging from 18’ to 56’, Thickness ranging from 6.0mm to 25.4mm confirming to API-5L.
1. Maintenance of 3-Roll Bending Machine, Post Bending Machine, Tack-Welding Machine,
I. D. Welding machine, O.D. Welding Machine, Beveling Machine & Hydro tester
Machine and Sizing Press etc.
2. Maintenance of Air- Compressor, Air- Dryer, Blowers, Pneumatic- Grinders, E.O.T.
Crane (15 T & 20T), Cooling Tower,
3. Maintenance of Lathe Machine, Shaper Machine, Harden Testing Machine, Drilling
Machine.
4. Maintenance of Hydraulic Valves, Hydraulic Pumps & Heat Exchanger.
EXPERIENCE WITH “UNITED CONTRUCTION CO “.
Post : Supervisor
Period : June 1993 ~ March 1996
“United Construction Co” (Obra & Anpara) is a manufacturer of job works & maintenance of Boiler Equipments.
1. Supervision of fabrication work.
2. Maintenance of Bowl- Mill, Oil-Cooler, Pryte Hopper Chute, Chain Drive Assembly,
Classifier, Guide Vane, Heat Exchanger in” Obra Thermal Power Plant” (200MW).
3. Operation work of Ball Mill, F.D. Fan, I.D. Fan, Sludge Crusher, Fuel Oil Pump etc. in “Anpara Thermal Power Plant “(500MW).

[Guest]

Respected sir,
I am Jyoti Subramaniam, I want to join your company as maintenance manager.
I am attaching my resume below, please look through it and give me a reply as fast as possible.
thanking you,
Jyoti Subramaniam
RESUME
JYOTI SUBRAMANIAM

E-mail : jyothi.s182 AT gmail.com
_____________________________________________________________
ACADEMIC QUALIFICATION :
SSC : 85.86%
Examination Board : GSEB
School : Asia English School
HSC : 68.40%
Examination Board : GSHSEB
School : Asia English School
B.E. (Metallurgy.)
UNIVERSITY : Gujarat Technological University
INSTITUTE : Indus Institute of Technology & Engineering
Qualifications Academic Year SPI Percentage
3rd Semester 2009 8.03 73%
4th Semester 2010 7.82 70%
5th Semester 2010 8.20 75%
6th Semester 2011 8.67 80%
7th Semester 2011 9.27 86%
________________________________________
TECHNICAL EXPOSURE :
________________________________________
________________________________________
Industrial training :
________________________________________
________________________________________
1. Duration : 7 days Organization/Company (Place): Shree Hans Alloys
________________________________________
Details : Shree Hans Alloys is a foundry which makes castings for pumps. It is a medium sized foundry
________________________________________
Located at Dholka town in Gujarat. Gained valuable knowledge regarding working of a foundry and important steps carried out in foundries like Pattern making, melting of steel using induction
________________________________________
Furnace, die and mould making, CO2-Silicate process of sand molding, etc.
________________________________________

________________________________________
2. Duration : 7 days Organization/Company (Place): Himali Steels Ltd.
________________________________________
Details : Himali steels are a company which makes mild steel sheets of various thicknesses.
________________________________________
Information regarding annealing and quenching heat treatment was obtained. Also hot rolling process was observed at Himali steels
________________________________________
.
3. Duration : 15 days Organization/Company (Place): Anand Engineering Pvt Ltd
________________________________________
Details : Anand engineering& Casting is a foundry which makes castings for
compressor, steam turbine, windmill turbine & motor body.
________________________________________
Industrial visit :
________________________________________
1. Mother Dairy – We had a glimpse of production of milk products
________________________________________
2. M.S. University : – saw working of magnetic separator
________________________________________
3. GMDC (KADI) :- saw the mining of Fluorspar and sub-sequent processes like Grinding, Milling,
________________________________________
Froth Floatation, Washing, Drying, etc.
________________________________________
4. Divine Laboratories : - studied NDT methods.
________________________________________
5. Electrotherm (Kutch) :- studied and observed the working of centrifugal casting and a caught a
Glimpse of Steel melting Shop.
________________________________________
Other involvements
________________________________________
- Undertook a project with Electrotherm for the research of reduction of iron ore composites.
________________________________________
- Member of the SPC [student placement committee] in college.
________________________________________
- Two time Winner of dancing competition held in college
________________________________________
- Participant in a Treasure Hunt in college.
________________________________________
- Active participant in sports like Girls Cricket, Tug of war, Badminton, Singing, Dancing etc.
- ________________________________________Attended Seminars & Workshops on Nano Materials, advanced Techniques of Material Characterization
________________________________________
- Won inter-school dancing competition
CAREER OBJECTIVE : Obtain a position at a well-established company where I can maximize my management skills, quality assurance, technical & practical knowledge, program development and training experience.
________________________________________
Model Company :
________________________________________
________________________________________
L&T, Tata Steel, Essar Steel, Jindal steel, ISPAT MONNET, Foundries etc.
________________________________________
________________________________________
COMPUTER:
________________________________________
________________________________________
- Knowledge of Microsoft Office and other generally used software’s.
________________________________________
SOFT SKILLS
________________________________________
- Ambivert ________________________________________
- Very good communication skills and, Ambidextrous (skill full with both hands)
________________________________________
- Also skilled in public relations

________________________________________
ACHIEVEMENTS
________________________________________
- Completed 7year course in Classical Dancing.
________________________________________
- Received academic award for outstanding performance in academics.

[Guest]

please inform me regarding vacancy in any spun pipe castration/ductile iron plant
murtymp
DGM(M)
SPUN PIPE PLANT

[Guest]

To work in professional, stimulating environment, constantly upgrade my knowledge and explore my maximum potential as a professional by contributing towards the growth of the organization

[Guest]

RESUME
name : Hitesh Valani
mail Id. : h_valani AT yahoo.com
CAREER OBJECTIVE
To be associates with a progressive organization, this can provide me, dynamic work sphere to
Extract my skills use and develop my attitude to achieve the organization’s objective and also mould my carrier in the process.
PERSONAL STRENGTHS
- Good communication skills and punctual.
- Strength to work from minimum input to maximum output.
- Good command over Planning, Reporting, Managing, Manpower, Data collections & Data acquisition
- Good knowledge about ISO 9001 :2008 & TS 16949.
- Confident at doing the job assigned, Smart work and perseverance.
- Quick learner.
EDUCATIONAL QUALIFICATION
- I have First Class in Diploma in Electrical Engineering in 2004 From T.E.B.GANDHINAGAR.
- I have Distinction in EST. in 2000 From T.E.B.GANDHINAGAR.
- I have Distinction in Wireman in 1998 from ITI.
- I have passed new SSC Exam in March 1996 From G.S.E.B.GANDHINAGAR.
WORK EXPERIENCE
v SOLCO ENGINEERING.
Duration : 1st July 2004 to 28th Feb. 2005
Manufacturing : CNC Grinding Machines.
Designation : Trainee Engineer
Responsibilities : To make an Electrical Panel for CNC Grinding m/c.
v RAMA CYLINDERS LTD.
Duration : 03rd March 2005 to 06th Feb.2006
Manufacturing : Manufacturing High Pressure CNG & Oxygen Cyl. For Automobile & Industrial sectors.
Designation : Production Engineer for Heat Treatment of Cylinders
Responsibilities : Shift In charge, all system control by SCADA (Supervisory Control and Data acquisition) system. Looking after all activity related heat treatment like to maintain temperature, hardness of the cylinders, and Concentration % of quenching media & Overall maintenance of heat treatment furnace.

v GRAN ELECTRICAL PVT LTD. (VEDIOCON)
Duration : 01st March 2006 to 30th Oct. 2007
Manufacturing : Manufacturing Washing Machine & Refrigerator
Designation : Production & Maintenance engr. (elec. & mech.).
Responsibilities : Looking Assembly line making stator for washing machine.
& my personal achievement is that I have made 900 nos. Stators in a shift (8hrs.)
This is the record production.
v LIZER CYLINDERS LTD. (A JPM GROUP OF COMPANY) :
Duration : 06TH Nov. 2007 to continue.

Manufacturing : High Pressure CNG & Industrial Cylinders.
Designation : Sr.Engineer cum Section in Charge Production.
Responsibilities : Responsible for all activity related HQT Department. Like Management, Planning, Reporting to directly V.P., Maintain all ISO. & TS 16949 documents, Provide Heat treatment graphs & reports for third party inspections, R&D, Maintenance Plan & maintenance of the furnace. To control temperature, Data collection & data acquisition, Hardness, Concentration % of quenching media,
Present CTC : 30,000/P.M.
WORK PROFILE :
I can able to work in any type of situation & location also. I have good command in heat treatment furnace & Assembly line. Presently I am working with ISO/TS 16949 recognized company (Lizer Cylinders ltd.). Since 06th nov.2007 to till the date. I have good command over ISO/TS 16949 the standard which used for automobile sector.

Have good knowledge of PPAP (Part Product Approval Process), TPM (Total Productive Maintenance, SPC (Statistical Process Control), SCM (Supply Chain Management), MSA (Measurement System Analysis), PFMEA (Process Failure Mode Effective Analysis), OEE (Overall Equipment Effectiveness) & Control Plan etc.

In 2008 I reduced consumption of light diesel oil around 300 ltr. Per shift (12 hrs.) to done some modification in hardening furnace, this has been one of my best achievement.