www.worleyparsons.com Engineering Visakhapatnam : Pipeline Marine Tunneling Mechanical Engineer

[mskavi]

Worleyparsons Engineering Visakhapatnam : Mechanical Site Engineer

Designation: Mechanical Site Engineer

Job Description:
B. E Mechanical
It is related to SPM and connected offshore-onshore Pipeline for HPCL for crude oil transportation. The onshore portion includes appx. 1 Km of tunnelling ( size could be appx. 6M*4M), onshore pipeline and valve station.HPCL marine terminal and associated facilities (including some onshore facilities) project and as part of the PMC scopes,

Desired Candidate Profile:
It is related to SPM and connected offshore-onshore Pipeline for HPCL for crude oil transportation. The onshore portion includes appx. 1 Km of tunnelling ( size could be appx. 6M*4M), onshore pipeline and valve station.HPCL marine terminal and associated facilities (including some onshore facilities) project and as part of the PMC scopes,

It is for a period of six month contract extendable

Address:
1 mahal Industrial Estate, Mahakali caves road
Near Holy family school, sanghi oxygen compound
Andheri East
MUMBAI,Maharashtra,India 400093

Email Address: malathy.mudaliar@worleyparsons.com
Website: http://www.worleyparsons.com

Keywords: marine, tunneling, foundation, building, jetty, Marine terminals

[lerins]

Dear sir ,

here with attached my CV for your kind perusal ,

I had 19 years of rich experience in the construction field ,i had rich experience in piping ,equipement erection , structural heavy erection andd all kind of pumps ,vertical ,horizantal, blowers ,clarifier ,lamrella clarifier , turbine pumps heat exchangers etc.


i hope my cv may full fill your requirement please refer and give me your feed back by return mail.
Regards ,

lerins

[Guest-IJT]

Dear Sir,

I am professionally motivated engineer looking for an opportunity in the field of Oil & natural gas and petroleum related industries where I can put my technical knowledge and leadership skills to work.

I am working as Piping Engineer at GAMA QATAR W.L.L. I have an excellent performance record and am considered to be a high potential employee by my employers.

I being given to know that there are certain vacancies available in your organization. So I am attaching my Resume for your kind reference. Through review of my enclosed Resume, hope that we will have the opportunity to personally meet in the near future.

Thank you

Yours Faithfully
Majeed Abdul Khader
CURRICULUM VITAE MAJEED ABDUL KHADER
NATIONALITY : INDIAN.
DATE OF BIRTH : 16-03-1983
PASSPORT NO : G7712186
EMAIL : majeedabdulkhader AT gmail.com
CONTACTS : Res - +91-4862223655 begin_of_the_skype_highlighting+91-4862223655end_of_the_skype_highlighting
: Mob - +974-66077430.
LANGUAGES KNOWN : ENGLISH, HINDI, MALAYALAM, TAMIL.
OBJECTIVE

To pursue a challenging position in oil field and related industries, where I can effectively use my knowledge and skills to make a positive contribution to the company and to reach a position of key responsibility.
PROFILE FIELD OF EXPERTISE
Worked as Piping Engineer for over 3 years in Oil Gas and chemical Industries.
EDUCATIONAL QUALIFICATION
- Bachelor of Engineering in Mechanical Engineering
Oxford Engineering College, Trichy, Tamil Naidu
Anna University, Chennai
- Diploma In Mechanical Engineering
Govt: Polytechnic College, Muttom
Technical education Board, Kerala
KEY SKILLS
- A mechanical engineer with specialization in oil field engineering and quality control.
- Disciplined professional with proven success in meeting tight deadlines and delivering work
of quality in an effective and efficient manner.
- Quick at learning new concepts and technologies and putting them to use.
- Good communication and interpersonal skills.
- Meticulous and hard working.
- Setting higher standards of performance.
- Good at taking initiative, leading and working in a team.
EXPERIENCE

Aug 2008 to till date : PIPING ENGINEER,
GAMA QATAR
CLIENT : QATAR GAS
CONTRACTOR : CTJV
PROJECT : QG 3&4 LNG PROJECT (QCS)
DUTIES AND RESPOSIBILITIES:
- Controlling and Coordination of spool management department
- Overall Supervision of Construction Activities for Piping and welding activities.
- Review and evaluate drawing on Plan, Isometric, P&ID¡¦s for monitoring the Piping Fabrication and Execution
- Assign the manpower for job requirements
- Co ordination with Engineering Department
- Analyzing the site issues through RFI
- Prepare the material requirement list based on the field requirement
- Report the progresses on timely to Section Engineer/Manage
- Preparation of Hydro testing & Pneumatic Testing for Test Packs
- Co ordination with quality control department
- Follow up the Pre Walk down and Tri Party Walk down with client as per system wise.
- Presence of management meetings
- Ensure all activities are carried out safely and in compliance to Qatar Gas PTW system, company
- HSE policies and arrange for client requirements for critical jobs.
- Originator for permits
- Maintain a good working relationship with the staffs and workers at all levels
.
MATERIALS HANDLED:
CS (A106 B),CS Aluminized, CS Cemented, Low alloy (A335-P11),SS(304L,316L),INCONEL(6625),INCOLOY(8825),HASTE ALLOY,LTCS NACE,CLADDED,FRP Materials & dissimilar materials.
Oct 2007 to Aug 2008 : GRADUATE ENGINEERING TRAINEE
MECHANICAL DEPARTMENT

CLIENT : TRAVANCORE COCHIN CHEMICALS LIMITED, ELOOR
DUTIES AND RESPONSIBILITIES
- Direct supervision of a group of skilled workforce in the Fabrication and Erection of various Process Pipe Lines,
- Maintenance and erection of Turbo-machinery like Pumps, Compressors, Process vessels, Heat Exchangers, Refrigeration equipments, Material Handling Equipments etc.
- Maintenance of Utilities like Cooling Towers, Water Treatment Plants, Air compressor Systems etc.
AREAS OF EXPOSURE:
- Familiar with MTC, checking MTC.
- Knowledge in materials as per ASME section ll – A
- Knowledge in fittings flanges ASME 16.5/16.47/16.9/16.11.
- Familiar with NACE service MR0175.
- Familiar with TEST Pack, RFI
- Erected above ground and under ground piping.
- Knowledge about safety requirements.
- Familiar with Construction Drawings such as P&ID, Piping Isometrics, Equipment, Structural, GAD.
- Familiar with Material Inspection, dimensional check and documentation as per construction Materials Standards such as ASTM / ASME SA 106, SA 515,SA 516, SA 105, SA 312, SA 240, SA 234 etc and with ANSI standards of B36.10, B16.5, B 16.9 etc.
- Fabrication of Piping, Structure, Pressure vessels and other Equipments documentation of history Sheet, Test Pack Clearing etc.
- Confident to handle the construction and quality control activities as specified in the drawings and applicable standards and specifications.
SAFETY TRANINGS
- First Aid Training
- Safety Leadership Training
- SIMOPS (Chiyoda Technip Joint Venture)
- Awareness for Hazards/Risk Determination And Health & Safety on Side Course
- Supervisor’s skill workshop training
SOFTWARE PROFICIENCY
- AutoCAD, C++(Basic),
- Operating Systems and Others
Microsoft Office Applications: Word, PowerPoint, Excel
INTERESTS
- Travelling, Environmental activities, meeting new people and places
- Play different team sports like cricket and football
- Watching programs related to Mechanical engineering innovations Listening Music.
DECLARATION
I, hereby declare that the above mentioned particulars are true to the best of my knowledge.

( MAJEED ABDUL KHADER)

[Guest]

S.HARI KRISHNA.
E-mail Id : samireddyharikrishna AT yahoo.com
CAREER OBJECTIVES

Seeking for a challenging and a responsible career in the field where I can share & enrich my technical and interpersonal skills for the growth of the organization as well as individual.
EDUCATIONAL QUALIFICATIONS
Year Qualification Institute University / Board Percentage
2007-2011 B.Tech
(Mechanical) Avanthi Institute of Engineering And Technology,
Vizianagaram. J.N.T University, Kakinada. 62.40%
2005-2007 Intermediate Sri Chaitanya Jr. College,
Visakhapatnam. Board of Intermediate 80.6%
2004-2005 X (i.C.S.E) St. JOSEPH’S Secondary School,
Visakhapatnam. Indian Certificate of Secondary Education 63%
TECHNICAL SKILLS
1 Operating system : Windows (2000, xp)
2 Software Tools : MS-Office.
3 Programming Languages : C, Blue JAVA
4 Drafting Package : AutoCAD.
5 N.D.T (LEVEL 2) :ASNT CERTIFICATION
AREA OF INTEREST
1. Production
2. Manufacturing
3. Design
PERSONAL ATTRIBUTE
1 Ability to work in Groups as well as independently.
2 Positive thinking.
3 Willingness to learn & Belief in hard work
PROJECT PROFILE :
MINI PROJECT : LUBE OIL SYSTEM IN RAILWAY DIESEL ENGINES
ABSTRACT : THE MAIN OBJECTIVE OF THIS PROJECT IS TO REDUCE FRICTION AND WEAR BETWEEN BEARINGS AND PISTON.AND THE OTHER FUNCTIONS OF LUBE OIL SYSTEM ARE PROTECTION OF METAL SURFACES FROM CORROSION AND RUST. THE LUBE OIL SYSTEM KEEPS THE COMPONENTS CLEAN AND FREE FROM CARBON DEPOSITS AND PREVENTS THE PARTS FROM DAMAGE.
MAIN PROJECT : DESIGN OF SHELL AND TUBE HEAT EXCHANGER
ABSTRACT : THIS PROJECT MAINLY DEALS WITH THERMAL AND MECHANICAL DESIGN COSIDERATIONS IN AES TYPE OF SHELL AND TUBE HEAT EXCHANGER.THE OUTPUT OBTAINED FROM PROCESS DESIGN IS TAKEN AS INPUT FOR THERMAL DESIGN.
THE OUTPUT OBTAINED FROM BOTH THERMAL AND PROCESS DESIGN IS TAKEN AS INPUT FOR MECHANICAL DESIGN.THE OUTPUT FOR THERMAL DESIGN IS OBTAINED BOTH MANUALLY AND BY HTRI( HEAT TRANSFER RESEARCH INSTITUTE)
SOFTWARE.BOTH THE OUTPUTS GAVE THE SAME VALUE.THE DESIGN CODES FOLLOWED BY DESIGNING ARE ASME(AMERICAN SOCIETY FOR MECHANICAL ENGINEERS) AND FOR MECHANICAL AND TUBE DESIGNING ARE TEMA(TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION).

[Guest]

Sir,

I have 5 years exp in water pipeline projects,and i also have the exp in Autocad.


Regards,
Rajesh.