www.mrc.co.in Mahendra Raj Consultant Pvt Ltd Delhi : Structural Design Civil Engineer

[mskavi]

Mahendra Raj Consultant Pvt Ltd Delhi : Structural Design Civil Engineer
Website: http://www.mrc.co.in
mrc.co.in

Designation: STRUCTURAL DESIGN ENGINEER

Job Description:
Graduates & Post Graduates and those with 2 to 10 yrs experience in Structural Design of buildings, Bridges, Metro Stations, Industrial Structures and other Civil Engineering Works.

Address:
Mahendra Raj Consultant Pvt Ltd
A-43, 1st Floor Okhla Industrial Area Phase-I
NEW DELHI,Delhi,India 110001
Email Address: admin@mrc.co.in
Telephone: 91-11-26817661

[Guest-IJT]

Name : joseph kevin zambwa
Email : josephk.zambwa AT yahoo.com
Designation / Skillset : engineering/civil engineer/civil engineering

Resume :
7th August, 2011.
OBJECTIVES; To improve organizational objectives, and to strive for
Excellence and precision in all circumstances, attaining
Professional distinction and proficiency.
EDUCATIONAL Federal University of Technology yola (FUTY).
QUALIFICATION; B.Eng. (Hons) Civil Engineering. 2010
West African Examination Council (WAEC)
NOV/DEC. GCE 2007
PERSONAL PROFILE; - Effective use of initiatives.
- Physical and Mental alertness.
- Integrity honesty and transparent.
- Good knowledge of Auto card drawing, and Microsoft Office.
- Ability to express technical information in a creative manner.
WORK EXPERIENCE; - Okiti Mixed secondary school (NYSC) 2010
Delta State.
- Student Industrial Work Experience Scheme (SIWES) 2007
Eleganza construction company Lagos.
Lekki Epe Express Way Lagos
Lagos state
- Three Month Student Industrial Training (IT) 2006
Department of works michika
Michika local government
Adamawa state
ACCOMPLISHMENT’S; - Supervision of building duplex and block of flats.
- Supervision of drainages and landscaping.
- Supervision of septic tank and suck away casting.
- Supervision of finishing works.
- 80% improvement in Mathematic background and basics.
- Introduction of lesson to student in the school.
- Inec Adhoc Staff 2011 election as presiding officer.
- Registration Officer I (RO I) voters registration card 2011.
FINAL YEAR PROJECT; Research on the effects of corrosion on Reinforced concrete structures and plates.
REFREES; Engr.J.A Tanko (Re; COREN, MNSE)
H.O.D Civil Engineering Department
Federal University of Technology Yola


Mr. Ishaya .T. Gadzama
Department of Library Science and Information.
Federal Polytechnics Mubi
Adamawa State.

Engr, Sir, Lawrence Ada’a Dari (Re; COREN, MNSE, KSM)
Federal Capital Development Authority (FCDA)
Abuja. FCT.

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4458467
Date & Time : 8th Aug 2011 2:06 PM (UTC)
IP Address : 41.78.80.105
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6
Predicted Country ;: --

[Guest]

RESUME
RAVI KUMAR BATHINA
--------------------------------------------------------------------------------------------------------------------
OBJECTIVE :
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.
EDUCATION QUALIFICAITON :
[M.TECH][ 80%](STRUCTURAL ENGINEERING) FROM JNTU ANANTHAPUR.
B.TECH. [62%][CIVIL ENGINEERING] [May 2008]
INTERMEDIATE [51.4%][Mar 2004]
SSC [68%][Mar 2002]
COMPUTER SKILLS :
Operating Systems :Windows
GUI : AutoCAD(2DX3D).
Design & Modeling : Photo shop, Staad-pro.
DESIGNING SKILLS :
STRUCTURAL DESIGN : RCC Design of individual houses, apartments and commercial complexes.
ADVANCED STRUCTURAL DESIGN : Designing of flat slabs, grid slabs, sloped roofs, deep beams, shell roofs, domes, wind load, earth quake analysis design.
STRUCTURAL STEEL DESIGN : Design of roof frame structures, steel frame analysis by using staad-pro and clear section detailed drawings using AutoCAD and Microstation.
CAREER EXPERIENCE :
Total 3.5 years experience.
Worked as Site engineer in IVRCL INFRA Ltd, KUTCH (DT) GUJARAT (April 2008-Dec2009)
Working as Lecturer in Dept. Of Civil Engineering, in Machilipatnam. (Dec 2009 to till date)
ROLES & RESPONSIBILITIES :
- Column orientation as per architectural plan.
- Bending moment and shear force calculation manually.
- Checking manual analysis using staad-pro.
- Generating design and calculation reports using staad-pro.
- Structural detailing and reinforcement detailed drawings using cad softwares.
- Structural elevation & sectional detailed drawings using cad softwares.
- BOQ for all building related materials.

[Guest]

CURRICULAM VITAE
SUSHIL Ku. SINGH
E-mail : sushilambani AT rediffmail.com , sushilambani AT yahoo.com

Career Objective :-
Seeking a challenging position where the knowledge I have gained can be utilized for the development of the organization. Aim is to maximize and enhance my skills to better serve for the organization.
Experience Detail :- Industrial Experience (5 YRS)
1. Employer : Adroitec information Systems Ltd.,Bangalore.
Business : Dealing with the Engineering detailing of Rolling mill Projects.
Designation : Sr. CAD Executive.
Department : Rolling Mill
Period : 14/05/2008 to 21/05/ 2010
Responsibility :
1 Detailing and checking of Equipment drawings.
2 Preparation of Layout and G.A drawings.
Project Involved :
1. IISCO Steel Plant-Medium Section Mill, Burnpur, West Bengal.
2. Worked with SMS Meer Gmbh, Germany through Adroitec.
2. Employer : R.Singh & Associates Pvt. Ltd, Delhi.
Business : Leading Engineering Consultant for Steel Plants & Rolling Mills in India & Abroad.
Designation : Asst. Design Engr.
Department : Rolling Mill
Period : 17/10/2005 to 13/05/2008
Responsibility :
1. Preparations of plant layouts and G.A drawings.
2. Preparing specifications, Selection of motors, gear boxes, couplings
3. Detailing and checking of Equipment drawings.
Projects involved :
1. 8-Stand Vertical-Horizontal Billet Mill of “Mahindra Ugine Steel Co. Ltd.”(Khopoli, Distt-Raigarh, Mumbai)
2. Bar Mill of Zion Steels Ltd, Orissa.
3. Discription – Process of designing a RCC building using STAAD PRO software along with HAND COMPUTATION
ACADEMIA :-

1. M.Tech. with Thermal Engg. from singhania university Y.O.P-2012.
2. B.Tech. (Mech. Engg.)-M.J.P.Rohilkhand University, Bareilly-64.8%-Y.O.P-2004.
3. XII SML Inter College, Ghaziabad From U.P.Board In1999.
4. X SML Inter College Ghaziabad From U.P.Board In 1997.

ADDITIONAL QUALIFICATION :-
Diploma certificate in CAD Engineering
1. AUTO CAD 2007,2010
Computer Literacy :-
- Platform : XP, VISTA. WINDOWS-7
- Packages : Proficiency in MS-Office.
- Good command over softwares.
- Network utility Internet,
SPECIAL SKILLS :-
1. STAAD PRO. 2007
2. MICROSOFT PROJECT 2007
Strength :-
- Learning attitude, Adjusting Nature, Team Leadership, and Hard Worker.
Declaration :-
I hereby declare that the above particulars are true to the best of my knowledge in all the respect.
Date:
Place: GHAZIABAD SUSHIL Ku. SINGH