Resume / CV : Drilling Supervisor

[raisuddin12]

RAISUDDIN, B.
Email :raisuddin12 AT yahoo.co.in

Objective :
Seeking a challenging ”DRILLING SUPRINTENDENT/Supervisor“position in an operating Company, utilizing my experience and engineering skills to contribute for mutual growth.

Profile at a glance :
I am B. Tech Mech Engr with over 29 yrs of experience in drilling operations including deep, horizontal Multilateral/ slim hole drilling. With graduation in Engineering back ground working in a challenging oil field which has a scope to use conceptual & analytical skills under present day of high technological environment. My strength is adoptability to circumstances & rising to the occasion.

Core Competencies :
Experience of 28 years ( 10 yrs off shore jack up Rig+ 18 yrs on shore land Rig).
Knowledge of Aramco operations, safety, health & environment concern.
Sound knowledge of drilling & completion of horizontal, multilateral & smart wells.
Ability to take control of unusual well control situation,
Good knowledge of fishing & Rig building operations.
Outstanding communication & coordination skills.
Excellent team spirit, assist & interact effectively with other discipline team.
Knowledge of safety audit of rigs.

Current Assignment :
Dec2006-Till Date : Drilling Foreman-in ARAMCO Saudi Arabia Company.
Job Details : Drilled &completed horizontal, multilateral, power water injector, horizontal open hole & cased hole side track, exploration & development oil, gas, water, high temp & high press deep(16000ft), shallow (1500 ft) upper & lower completion, smart wells completion in Haradh, Shudgum, Abqaiq, Utmanya ,Dilam, Khurais & Nuyyim fields.
Run & cemented different sizes of casings (from 7” to 30”) with simple & double stages, with blended & light cement,
Run 4-1/2” & 7” mechanical & hydraulic liners.
Drilling with water base & oil base mud with different oil & water ratio, K.cl polymer mud, Saturated salt water mud, blind drilling with water when total loss encounter, heavy & light mud (19.6 ppg & 7.16 ppg ) .

June 2004-Dec 2006 : Area Manager: Ankleshwar Asset-GUJRAT O.N.G.C LTD National Oil Company INDIA
Job Details : Supervised drilling & work over operations of four rigs. Drilled & completed high angle directional & horizontal wells (4500 mts). Liquidated well complications. Handled well control situations. Planned , executed & made reduction in rig shifting & rig building time.

June2003-June2004 : Manager planning &Contracting, Ankleshwar Asset-GUJRAT O.N.G.C LTD National Oil Company INDIA.
Job Details : Executed contracts with service companies. Planned & Carried out materials procurement of well consumables & spare parts for the rigs

June2000-june2003 :Rig Manager : Assam Asset SIVSAGAR, O.N.G.C LTD National OilCompany INDIA
Job Details : worked as rig Manager, This is more difficult area logistically &Planning and drilling deep directional wells (14000 ft). Liquidated well complication like stuck ups & well control situations.

June 1993 to June 2000 : Rig Manager KG Project Rajahmundry O.N.G.C LTD National Oil Company INDIA
Job Details : Worked on shallow and deep drilling rigs, involved in drilling High Pressure Gas wells to a depth of 4000 -4500 mts & Shallow gas hazards.
Critical maintenance of Well Control Equipment, maintenance of mud parameters and adherence to the safety norms of the company were very critical to safe operations in those conditions.
Involved in drilling high pressure gas wells in Pasarlapudi , Chintlapalli and Narsapur gas field. Experienced and controlled well kicks of very high pressure.
Rig moves have been so meticulously analyzed and time brake downs of concurrent and non critical operations carried out resulting in cutting down the rig move to 50%.
As drilling operations in India especially land operations are in a very remote areas planning of well design, ordering materials, contingency plans for casings, liner hangers, cementing plans with losses and without losses and planning all service hands becomes so critical that running operations without down time is a challenge.

June 1986 to June 1993 :Tool Pusher-Off Shore Rigs O.N.G.C L TD National Oil Company INDIA
Job Details : Supervise Jack-up rig operations for more than 5000 m deep oil, gas and H2S wells in Arabian Sea. Took responsibilities of crew including execution of daily drilling operations on off shore-rigs. Worked with wide range of drilling equipments including top drive with national and foreigner rig crews.
Handled well kicks, simultaneously loss and kick situations and successfully carried out fishing job whenever occurred.
Actively involved in repair maintenance of well-controlled equipments, mud handling system and other drilling equipments.
Co-ordinate with all disciplined on rigs and hired services like weather ford, smith, Halliburton and schulmbergers.
Carried out all operations with safety & environment as primary concerns.

Sept 1980-1986 Shift Driller Off-shore rigs O.N.G.C LTD National Oil Company INDIA
Job Details : As a shift driller drilled vertical exploratory and development directional well in Mumbai off shore Jack up rig. Co-ordinated with all discipline team working at rig handled shift crew. Monitored safety, health and environment

EXPERIENCE DESCRIPTION :
· Well control procedure for water oil & gas well. Use of divertor for shallow gas in surface hole.
· Window cutting with weather ford whip stock & milling equipments.
· Multilateral wells using BOT window master, weather ford /smith whip stock & section milling tools.
· Two stage cementation using Halliburton/ weather ford D.V collar.
· TCP gun perforation & smart well & ECP completion.
· Use of LWD/ MWD/ GR tools in horizontal section for steering while drilling.
· Use of abandonment KIT with CTC pkr for abandonment of bottom part of drain hole after drilling.
· Scrab liners for isolation of any part of any hole.
· Drilling problem-partial & total loss while drilling, running casing & cementation jobs. Stuck pipe in tight hole & formation swelling, section drilled with PDC bit & with high ROP.
· Logging procedure in open & case hole , reservoir & the precautions required during the jobs.
· DST running procedure, packer setting, well flowing through flare line & separator.
· Completion procedure in-open & cased hole, zone isolation with M-pass packer, schulmberger & baker hydraulic production setting, wire line operation.

Responsibilities :
· Protecting the company interest on the rig.
· Conducted pre-spud meetings, safety meetings, daily review and tailgate meetings.
· Implementation of well plan. Preparation & execution of day to day operations like-drilling, casing, cementation logging & tubing convey perforation.
· Ensuring compliance with well program and discuss the changes with Drilling Superintendent & and Drilling Engineer.
· Monitored trajectory in horizontal well using well plan software, acidizaiton, completion & monitoring well cost daily operation.
· Planning and monitoring of drilling and completion of well.
· Ordering of material and services.
· Coordinating material supply form different stores/ department/ companies.
· Coordinating services that is directional drilling, fishing, drilling tools, packer, cementing, wire line, geology.
· Review and comments on future well programs.
· Implementation of coring, logging operations and witnessing the same.
· Selection and ordering of bits.
· Pressure test BOP equipments & other drilling Equipments in compliance with the company procedures.
· Supervising well for other operations prior of rig arrival.

Training and Business Trips :
· Advance drilling seminar conducted by Gilley associates (USA) 10 days in 1985.
· Repair and maintenance of jack up rig in dock yard Dubai 20 days 1986.
· Repair and lag fabrication of jack up rig in Osaka Japan 30 days in 1987.
· Enhancement of managerial skill in Gorgon Delhi 21 days 1998.
· International gas business work shop at Bali Indonesia 5 days in 2001.
· IWCF well control training in IDT Dharadune 5 days 2006.
· IADC well control training in Dhahran KSA 5 days 2008.
· Industrial fire fighting training RT KSA 1 day 2009.
· BLS training Dhahran KSA 1 day 2008.
· Work per mitt issue training Dhahran KSA 1 day 2008.
· Hazards recognition & H2S training Abqaiq KSA 1 day 2008.

Computer Skills :
MS office, PowerPoint, excels.

Personal Particulars :
Nationality : Indian
Date of birth : 15 June 1957
Language known : English, Hindi and Urdu

[pooja111]

PUJA GHOSH DASTIDAR
E-MAIL : puja.gda AT gmail.com

OBJECTIVE:
Intend to build a career with leading corporate of exploration with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.

EDUCATIONAL QUALIFICATION :
NAME OF THE EXAMINATION BOARD/UNIVERSITY YEAR OF PASSING PERCENTAGE OF MARKS %/GRADE:
M.Sc. (Applied Geology) UNIVERSITY OF CALCUTTA 2011 64.1%
Grade - 4.141
B.sc (Geology Hons.) UNIVERSITY OF CALCUTTA 2009 51.12%
A.I.S.S.C.E (ALL INDIA SENIOR SECONDARY CERTIFICATE EXAMINATION) C.B.S.E.
(CENTRAL BOARD OF SECONDARY EDUCATION) 2006 65.4%
A.I.S.S.E (ALL INDIA SECONDARY SCHOOL EXAMINATION) C.B.S.E.
(CENTRAL BOARD OF SECONDARY EDUCATION) 2004 84.6%

TRAININGS UNDERGONE :
- Geological Field survey about Petrology and Rock Analysis in and around Maithon and Sevok (North Bengal) (West Bengal, India) in the year 2007. Geological Field survey for Topographical study and structural Mapping of the geological area in and around Ghatshila, Jharkhand, India, and Geological Field survey about Mining Geology in Mochia (HZL) and Jhamarkotra, Rajasthan, India, in the year 2008.
- General Geological Field Survey in and around Chitradurga, Karnataka in the year 2010.
- Summer Industrial Training about petroleum and its Exploration techniques in MBA basin under the supervision of OIL AND NATURAL GAS CORPORATION Ltd. (ONGC), KOLKATA in the year 2010.
- Training about the techniques of blasting and mining of limestone, processes of cement manufacturing in the MEJIA CEMENT PLANT, Raniganj owned by LAFARGE INDIA in the year 2011.

M.SC. DISSERTATION :
MICRO PALAEONTOLOGY - Study of selected Middle Eocene Larger foraminifera from Kutch, Gujarat with emphasis on Nummulites vredenburgi Prever under SEM, under the guidance of Dr. Siddhartha Sengupta.

SPECIAL SKILLS :
Technological;: Microsoft Office, HTML, Corel draw, Programming Language: C, C++, JAVA SCRIPT (BASIC), Ge Orient. Have done certified course on computer from Youth computer training Centre affiliated by Government of West Bengal.