ONGC Mumbai Recruitment 2009 : Technicians Production, Electrical, Instrumentation, Mechanical, Electronics

[Admin]

OIL AND NATURAL GAS CORPORATION LIMITED

WESTERN OFFSHORE UNIT, MUMBAI

Advertisement No. 01/2009

ONGC, a “Flagship Navratna” Public Sector Enterprise, is the most valuable company in India engaged in Exploration and Production of Oil & Gas in India and abroad. The company offers one of the best compensation packages in cost to company terms in the country.

ONGC-Mumbai Sector invites applications (online) for recruitment of young and energetic men as Assistant Technicians (A-II Level) from candidates with valid registration of eligible Diploma qualification in any of the Employment Exchanges located within the State of Maharashtra. The Employment Exchange certificate/card Registration should be valid during the online registration process.

The job demands outdoor field work in shifts requiring considerable physical efforts and technical skills. The job is transferable to any Offshore/Onshore location within the country as demanded by the semi-mobile nature of operations.


Recruitment for following posts:

Assistant Technician/ Production/
Assistant Technician/ Electrical/
Assistant Technician/ Instrumentation/
Assistant Technician/ Mechanical/
Assistant Technician/ Electronics/


Application Fee: General /OBC candidates are required to submit Application Fee vide Bank draft of Rs. 200/- valid for six months ,issued by any Nationalized or Scheduled Bank drawn in favour of “ONGC Ltd., Mumbai” payable at Mumbai. Candidate should write Name and Registration Slip number on the reverse of the Demand Draft.


Selection Methodology:
The selection methodology will comprise Written Test and Personal interview. The candidates will have to qualify at each stage separately and in aggregate.
HOW TO APPLY:

Candidates meeting the eligibility criteria and with valid registration of eligible diploma qualification in any of the Employment Exchanges located within the State of Maharashtra may apply online through the link “Recruitment of Assistant Technicians, Mumbai” on ONGC web site www.ongcindia.com. No other mode of application shall be accepted. The Employment Exchange certificate/card Registration should be valid during the online registration process.


Note: The applicants are required to keep following information in hand for online Registration:


1. Demand Draft number, bank name, date of issue.
2.SC/ST/OBC certificate details like date of issue, certificate No., issuing authority, Validity date of Non creamy layer certificate of OBC for SC/ST/OBC candidates.
3.Certificate of Competency as Electrical Supervisor for candidates of Electrical discipline. .
4.Percentage of marks in Diploma examination.
5.Valid email ID with validity for minimum period of six months.
6. Valid Employment Exchange Registration Card no of Diploma qualification issued by Employment Exchange located in Maharashtra State , Date of Registration, Valid up to /Renewal due date, Name of Employment exchange.

Admit card for written examination:
Exact date of the written test shall be communicated through admit card and will also be available on to www.ongcindia.com web site.


The admit card with details of the candidate, Roll No., date, time, venue of the examination, post applied for, category and discipline can be downloaded directly from the www.ongcindia.com by entering the unique registration number printed on the registration slip . The same will also be emailed to the candidate at the email address mentioned in the application form. No other communication will be sent separately.


The candidates are therefore advised to check their email and ONGC website www.ongcindia.com from time to time for details of examination and admit card.

Steps for applying:

1. Logon to www.ongcindia.com ONGC website and click on “Recruitment of Assistant Technicians, Mumbai. (Follow the flow chart).
2. Select the posts applied and fill in the requisite details in the online application format.
3. Preview the entered details, edit if required otherwise submit the application.
4. Once you submit your Application, the System will generate a unique Registration No. Take a printout of your Registered Application, which will have unique Registration number, your basic details like name, category, post applied for and test center opted.
5. Keep a photo copy of registration slip for record.
6. Forward the following documents :-
a. Printed registration slip with affixed recent passport size photograph attested by Gazetted officer/PSU Bank Manager or ONGC Officer at Manager level.
b. Two self attested recent passport size photographs (write registration slip no and name on reverse of photographs)
c. Attested copies of academic certificates (SSC, HSC, Diploma), Competency certificate as Electrical supervisor for candidates of Electrical Discipline.
d. Demand Draft (if applicable), write registration slip no. and name on reverse of Demand draft.
e. Attested Copy of SC/ST/OBC (with valid non creamy layer certificate) Caste certificate in prescribed format.
f. Attested Copy of valid Employment Exchange registration card /Certificate of eligible Diploma qualification issued by any of the Employment Exchange of Maharashtra.

NB: Apart from documents VI (a) to (e) the Departmental candidates are required to:
a. attach a certificate of experience in ONGC, issued by concerned I/c HR/ER for claiming age relaxation
b. attach a copy of ONGC Identity card for identification.

And Route their applications through proper channel; however an advance copy be forwarded
to below mentioned Post Box address.

Envelope containing application should be super scribed ‘APPLICATION FOR THE POST (DISCIPLINE) OF ________________ and sent by Ordinary Post only so as to reach latest by 23.10.2009 at the following address.

To,
The Advertiser (ONGC, WOU)
Post Box No. 9248,
Krishna Nagar Head Post Office
Delhi – 110 051

Opening date of online registration 23/09/2009 1000 Hours
Closing date of Online registration 15/10/2009 1800 Hours
Last date for receipt of registration slip with relevant attested documents to
P.O. Box No. mentioned above 23/10/2009
Tentative Start Date for Downloading of Admit card 05/11/2009
Tentative Date of written Test 22/11/2009

Applications have to be forwarded to the designated address by Ordinary post only. Registered /Speed Post will not be accepted.

http://emodeapply.com/ONGC-A-II/aDVT.htm
http://emodeapply.com/ONGC-A-II/FLOWCHART.htm
http://emodeapply.com/ONGC-A-II/apply.htm

Important : Online Application Start date : 23.09.2009, Closing Date : 15.10.2009, Last Date for receipt of Documents : 23.10.2009

[Guest]

Instrument Technician with 7 years of commissioning & maintenance exp. in oil and gas plants.

[Guest]

I want electronic job in ongc

[Guest]

I want join a govt.job.

[chavda_sachin]

i have job in ongc. i also work on oil field & i am diploma electrical engineer

[pawanms]

are yar ongc admit card for assistant technician kaha se down load kare please tel me

[inuthai]

Curriculum Vitae

KAMLE INUTHAI DIGAMBER
C/O Harishchandra Moholkar
580, Gurudatta Society
Survey No. 23
Dhankawadi, Pune-43
Contact No.: 09373446972, 09370377374
Email: inuthai@rediffmail.com

Ø Objectives:
To achieve and accomplish major goals of the organization through effective and efficient use of my skills and knowledge, thereby realizing my professional aspirations and potential. I want to work in an environment where I can deploy my talents optimally to add value to the organization.

Ø EDUCATIONAL DETAILS:
M Tech. in Chemical Engineering (2006-2008) from J.N.T.U.College of Engineering Anantapur, [An autonomous Institute of Govt. Of Andhra Pradesh].
Passed with Distinction 72.71 %.

B Tech. in Chemical Engineering (2001-2005) from J.N.T.U College of Engineering Anantapur.
Passed with Second class Aggregate 57.11 %.

Intermediate (1999-2001) from Dr.B.R.A.C.W.R.Jr.College Khammam, Board of
intermediate Education A.P
Passed with First division 85.40 %.

SSC (1999) from A.P.S.W.R.H.S Adilabad, Board secondary Education A.P.
Result: Passed with First division 77.33 %.

Ø Technical/Soft SKILLS:
Basic Knowledge in 'C' Programming

Ø ACADAMIC PROJECTS :
1. Design of controllers for I & II Order Time Delay Systems Using MATLAB
Duration :2007 to 2008
Purpose : In partial fulfillment for the degree of Master Of Technology
Description : In this project first and second order time delay systems are design by usingZiegler-Nichols, Cohen-Coon settings and IMC controller.

2. Refining of Edible Oils.
Duration : 6 Month
Team Size : 4
Purpose : In partial fulfillment for the Bachelor of Engg.
Description: The project laid here makes an attempt for the manufacture of 52 tons of refined oil.

Ø PERSONAL DETAILS:
Nationality : Indian
Marital Status : Married
Date of Birth : 02-July-1984
Languages Known : English, Hindi, Telugu,Marathi
Permanent Address : C/O Gadpale V.A.
At. Post Islapur Tq.Kinwat, Dist.Nanded
Pin Code-431803.

Ø Declaration
I hereby declare that the above written particulars are best of my knowledge and belief.

Place: Kamle Inuthai
Date :

[abhishek.londe]

this is abhihek i need this job my email id abhishek_londe@yahoo.com

[Guest]

i want job a instrument technician

[Ajeeshkollam]

RESUME

Ajeesh Abdul vahid, Instrument Technician,

OBJECTIVE :

Primary objective is to secure rewarding and challenging position related to my works experience and education qualification specified in this resume, which will effectively utilized my skills, abilities, experience and knowledge to provide mutual growth and enhancement.
SUMMERY OF EXPERIENCE :
Overall total more than 2 years experience in the project & maintance Inst-Technician.
Experience in the field of industries such us petro chemical plant, oil ,gas,production plant and power plant. Has work on pre-commissioning , startup and commissioning of the plant. With hands on experience of instruments works, process control instrumentation, loop checking, calibration of different instruments and able to read and interpret drawings P&ID.
PROFESSIONAL WORK EXPERIENCE IN SAUDI ARABIA (K S A) :
1. Petrochemical plant :
Name of company : Nasser al hajri corp.
Client : SHARQ EXPANSION PROJECT- III
Project : ETHELYNE PROJECT
Position held : Instrument technician
Location : Al-Jubail Industrial City
Kingdom of Saudi Arabia
Period : April 2009 to October 2009.
2. Petrochemical plant :
Name of company : Nasser al hajri corp.
Client : Saudi kayan
Project : SK phenolics
Position held : Instrument technician
Location : Al-Jubail Industrial City
Kingdom of Saudi Arabia
Period : November 2010 to may 2010
3.Petrochemical plant :
Name of company : S.A KENTZ
Client : SAUDI ARAMCO, JUYMAH.
Project : BUTANE PROJECT ,SHUTDOWN.
Position held : Instrument Technician
Location : JUY`MAH , RASTANURA
Kingdom of Saudi Arabia.
Period : June to 2010 to July.
3.Petrochemical plant :
Name of company : DALIEM SAUDIARABIA LTD.
Client : NATIONAL CHEVRON PHILIPS ,AL JUBAIL .
Project : SAUDI POLYMERS
Position held : Instrument Technician
Location : AL JUBAIL.
Kingdom of Saudi Arabia.
Period : August to 2010 to AT Present.
DUTIES AND RESPONSIBLITY:
- Installation, calibration, pre-commissioning and commissioning of various type filed instruments.
- Installation of PT, DPT, LT, RTD, Gauges, Cable Termination of JB, and Instruments.

- Install the Temperature Elements, - RTD, Thermocouple, and the Temperature Indicator in the Furnace Area.
- Loop folder preparation and handling with client.
- Loop checking, trouble shooting as per system drawing. Application and use of calibrator, hart communicator.
- Leak testing, loop checking, Meggering, Continuity Pre-commissioning of equipment as per company standard.
- Involved in field and workshop calibration for PT, LT, FT, TT Pressure switch, Level Switch.
- Yokogawa, Pressure, Flow, Temperature & Level Transmitter with Hart communication.
- Duties are re termination modification of during the period Shut down the plant.
- Control Valve Stroke checking and Calibration .

- Have worked on control valves such as Fisher, Vulcan, Valtek Flowserve.
- Working on quality verifying documents(QVD) department.
- Done commissioning ,pre-commissioning jobs at the same time we are safety rules.

PROFFESSIONAL WORKING EXPERIENCE IN INDIA:
1. Global Total Instrumentations ltd :
Client : Nittagelatin LTD, Kochi.
Location : cochin(India)
Position held : Instrumentation supervisor
Period : August 2008 to April 2009
DUTIES AND RESPONSIBLITY:
- Interlock, Meggering, Continuity Pre-commissioning of equipment as per company standard. Megger testing for power and signal cable.
- Loop checking, troubleshooting,etc.
- Cable lying, landing and termination of cables from sub-station to junction boxes and instruments.
- Application and use of calibrator. Line checking in instruments to control panel.
- Done commissioning jobs at the same time we are abide by safety rules.
- Calibration of various type of instruments.
Qualification University / Institute Year of Passing %
Diploma in Instrumentation Basic training centre, kollam.(NCVT) 2008 74
Plus-Two Science St jude hss kollam,kerala. 2006 61
SSLC St jude hss kollam,kerala 2004 70
PERSIONAL DETAILS:
Name : Ajeesh .A
Father Name : Abdul vahid
Age, Date of Birth : 23, (25-12-1987)
Sex : Male
Marital Status : Single
Nationality : Indian
Permanent Address : paravila veedu,
Nedumpana(p.o),muttakkavu,
kollam (DIST)
Kerala (STATE)
India –691580 (PIN)
Passport Number : H1757269
Date of issue : 27/11/2008
Date of Expiry : 26/11/2018
Contact mail : ajeesh42 AT yahoo.com , aajeeshabdul AT gmail.com ,ajeeshkollam AT hotmail.com .
Contact phone no : 0091-474-2564242 [home], 0091-9497030658[Mob]
Contact phone no (KSA) : 00966-509672702,00966-564702835 [mobile]
Languages known
English
Hindi
Malayalam
Tamil
DECLARATION:
I hereby declare that all the detail given above is true the detail given above are true and correct to the best of my knowledge and belief.
Place: Yours faithfully
Date: A.Ajeesh

[Guest]

KUMAR GUNJAN

Objective :
To work for a Professional Organization that promotes Quality, Continuous Learning & Constantly Creating Value in a Challenging Environment for Large Scale Oil & Gas Construction Projects. Hence, seeking a challenging position that will allow me to apply my proven technical and project management skills by which I can add value towards the growth of the organization and thus, grow professionally.
Executive summary
- A proactive and result oriented PIPING ENGINEER with more than 2 years of experience in India.
- Good written & oral communication skill in English & interpersonal skills.
- Well versed in Project scheduling, resource planning and project controlling.
- Good knowledge in AutoCAD, MS Office etc.
- Done PG Diploma in piping Engineering.
- Strong hold in all piping components & specifications.
- Sound knowledge in piping construction isometrics, piping layouts & P&ID drawings & capable of their fluent interpretation.
- Experience in piping support material take off, fabrication & erection
- Good Knowledge of International Standards Such as ASME, ASTM & API.
Skill Set :

Operating System : WINDOWS 98/2000/XP/VISTA/WINDOWS 7
Software skills : AutoCAD, PRO-E &MS Excel
Experience Profile
Present Employer : LARSON & TOUBRO LTD.
Client : HPCL & MITTAL ENERGY LTD (HMEL).
Consultant : ENGINEERS INDIA LTD (EIL).
Standards followed : ASME B 31.3
Designation : Project Engineer (Piping)
Duration : JAN 2010 TILL DATE.
Project site : Bhatinda Refinery Punjab.
Nature of Work : Performing significant role in EPC Project planning & Execution Team for construction of desired unit as per specified standards within allotted time period by client
Role & Responsibilities
- Significant part of an Engineering team responsible for the smooth construction of refinery in bhatinda Punjab.
- Receiving & carefully studying all client documents & standards & requesting technical clarity in any documents if required prior to construction.
- Planning underground piping erection as per client requirements.
- Making sure that all pipe fittings & fabricated parts are available at site for construction
- Taking off material for pipe supports from fabrication drawings and raising purchase requests & Coordinating fabrication activities.
- Preparing required basic shop drawings in AutoCAD
- Overseeing the completion of Pipe support fabrication works for the pipes in the area under concern.
- Planning above ground piping erection as per client requirements & availability of rack structure & Push structural department for rapid completion of structural works.
- Attending meetings with key persons of different departments and Coordinating with discipline engineers relating to Engineering, progress monitoring, hold-ups, delay analysis & identification of Areas of Concern to ensure smooth inter-disciplinary operations.
- Preparation and submission of productivity calculation report and other various report to top management
- Cost estimation and prepare invoices for completed works
- Making sure that all work is proceeding in accordance with contract specification, project planning schedules and approved method statements, construction drawings, Clients HSE standards
Experience Profile
Past Name of Employer : TRANS ENGINEERS PVT LTD.
Consultant : AKER POWER GAS, MUMBAI.
Designation : Project Engineer (Piping)
Duration : June2009 To dec2009.
Project site : Chemical plant, ankleshwar Gujarat.
Role & Responsibilities
- Was a Project Engineer for the construction of an expansion for Gujarat POLY-CYNIDE Chemicals Ltd responsibilities included
- Coordinating piping site activities as per the given schedule.
- Reporting daily progress of construction activities to management office.
- Preparing work schedules & providing targets for each day to piping Forman.
- Raising purchase request for piping support materials
- Coordinating piping support fabrication works.
- Making charts for planned progress vs. achieved progress in MS Excel every month & analyzing & discussing it with supervisors ,foremen & taking measures for improvement
- Attending meetings with client officials to explain & discuss the progress of work.
Achievements :
- Successfully overcoming all the above challenges.
- Client appreciation for working strategy.
- Client appreciation of completing work as per schedule.
Challenges :
- Working at temperatures as high as 318 KELVIN.
- Installation of a 14” CWS/CWR line in POLY-CYNIDE unit.
- Fabrication of non standard pipe supports (NSPS).
- Finalizing dimensions of pipe spring support for orderings purpose.
Hobbies :
Listening music, playing computer games, watching movies, playing & watching cricket, traveling.
SKILLS
.Knowledge’s gained from previous jobs are
- Comfortable with ASME codes & ASTM standards for piping & fittings
- Sound knowledge in construction isometrics & bulk MTO preparation
- Entry level knowledge in piping stresses & flexibility of piping system
- To coordinate site and planning activities
- Strong hold in all piping components & specifications
- To prepare detailed three week and three month look ahead schedules.
- Preparing daily, weekly reports, monthly report, Delay analysis reports and various other reports.
- To prepare required shop drawings in AutoCAD
- To read structural drawings and take off material required for fabrication from drawings and coordinate fabrication activities
Academic Profile :
Academic Period 2005 – 2009 (June)
Trade B.E. in Mechanical Engineering.
College Bhopal institute of technology & science, Bhopal (Madhya Pradesh)
EXPERIENCE : 2 YEARS
CURRENT LOCATION : BHATINDA (PUNJAB)
CURRENT CTC : 22,000 INR +ACCOMMODATION
EXPECTED CTC : NEGOTIABLE
NOTICE PERIOD: 7 DAYS

[Guest]

APPLICATION
Kartik B. Rathod
To,
HR Manager
Respected Sir,
Subject :- An application for the post of Instrument Technician
I have come to know that there is opportunity in your esteement organization
for above post. I wish to apply for the same post.
If my profile matches with your requirement. I shall to you for an
opportunity to appear in your selection procedure. I am enclosing my C.V. for your kind
consideration.
Thanking you,
“Hoping to be Favoured”
E-mail :
kartik.rathod AT yahoo.com
kartik.rathod89 AT gmail.com
__________________________________________________________________________
EDUCATIONAL QUALIFICATION
Examination Board/
University Passing Year Obtained
Marks
Percentage
%
S.S.C G.S.E.B.
Gandhinagar
March
2004 463/700 66.14%
TECHNICAL QUALIFICATION
Examination Institution Passing
Year
Obtained
Marks
Percentage
%
I.T.I.
(Inst. Mech.)
Industrial Training
Institute, Vadodara.
Gujarat.
(S.C.V.T.)
July-2006 508/700 72.57%
Apprentiship
(Inst. Mech)
Industrial Training
Institute, Vadodara.
Gujarat.
(N.C.V.T.)
July-2008 410/520 78.84%
SUMMARY OF EXPERRIENCE
- More then 4.5 Years carry out Daily Instrumentation activities associated with Oil &
Gas Petroleum Refinery, Petrochemical, offsite. General Field instrumentation and test
equipment. An Expediting, Installation & Commissioning.
EXPERIENCE
- I have worked as a Instrument Technician in “Indian Oil Corporation ltd.,
Vadodara” On contract based in “Tecno Process Equipment (India) Pvt. Ltd.
Duration :- 11th August 2006 to 19th September 2007.
- I have completed my one years Apprentice Training in “Alembic Glass Industries
Ltd.Vadodara.
Duration : - 5th October 2007 to 4th October 2008
- I have worked as an Instrument Technician in M/s A-Z Instrument Services,
Vadodara., For Their Various Contract.
Duration :- 3rd November 2008 to 25th December 2010.
- Being Instrument Technician in M/s. A-Z Instrument Services, presently I am
working for their Various Contracts in, IOCL Panipat, Samsung Engg. , Radhanpur
TATA Projects ltd., Viramgam IOT Engg. Projects Ltd., ,Jamnagar Punjlloyd ltd.,
G.N.F.C. Bharuch., IOT Engg. Projects Ltd.Different Plant & Side for Installation,
Calibration, Loop Checking of Process Equipment. To Ensure Safety Interlocks In
Ready Position Before Start Up Of Process Equipments. Hand over Procedure from
sections By Sections to the Clients as per Satisfaction. Our Company is ISO-9000. I
am Look after ISO-9000 Calibration for our Clint who have Required as per ISO-
9000 Certification & Calibration report for Master Instrument & Various types of
Filed & Control Room Instruments. We are doing calibration for Project.
- Presently I am working as an Instrument Technician in AIR LIQUIDE INDIA PVT.
LTD. (MNC Group Company).
TECHNICAL SKILL
- Troubleshooting, repairs and calibration of Field Instruments, replacing the old
instruments with new ones as per the shutdown plan, calibration of instruments like
transmitters, level trolls, switches, stroke checking of control valves, I/P Converters,
and field calibrating them if required. Checking of temperature points and
thermowells and replace the temperature elements and thermowells if required.
- Attending daily jobs allotted by the Supervisor like PM Check, Alarm
and Trip Checks and other instrument related jobs coming up every now and then
called for by the Operations Department like check and calibrate the instruments for
abnormal readings, field calibration of control valves, Check and service..
- Calibration and maintenance of DP transmitter,Temp.Transmitter, Level troll, Level
switches etc.
- Knowledge of field instruments supplied by ABB, Rosemount, Yokogawa, Honey