Lead Mechanical Engineer Mumbai : EPC Company

[Admin]

Urgent Requirements for an EPC Company in Mumbai, India

Position :Mechanical Engineer (Lead/Chief)
Work Location:Mumbai, India
Job Duration:Long Term (Direct Hire)

Qualifications:Graduate in Mechanical Engineering

Experience: 10 to 15 years
Job Location: Mumbai, India.
Employee Status: Fulltime

Skills Required:
[LIST][*]

Graduate in Mechanical engineering with minimum 10 years relevant experience in design & engineering in oil and gas industry of which.

[*]

At least 3 years experience as lead discipline design engineer in offshore industry.

[*]

Knowledge of PVElite, Compress, APV (recommended), AutoCAD (basic), Microsoft Office software.

[*]

Good command of written and spoken English.

[*]

Conversant with international design/ engineering codes and standard.

[*]

Good Communication skills.

[/LIST]

Job Description:

[LIST][*]

Receives allocated duties and reviews enquiry documentation from client together with Scope of Work to understand what is required.

[*]

Raises queries where there is lack of clarity.

[*]

Prepares man-hour estimates for engineering deliverables at the estimation stage, for consideration in the development of the final bid.

[*]

Creates drawings and document register to ensure all deliverables are accountable and completed on time.

[*]

Prepares specifications and data sheets. Perform detailed design of static equipment.

[*]

Coordinates with the Drafting Office Co-ordinator for the checking and issuing of detailed drawings and shop drawings.

[*]

Prepares the Purchase Requisition for equipment's components and specify inspection/ test and vendor data requirements.

[*]

Undertakes technical evaluations of vendor offers for the more complex items to ensure PR's technical details are satisfied.

[*]

Prepares material take-offs for Engineering Procurement and Construction (EPC) projects.

[*]

Provides input for the development of the Planning Package.

[*]

Provides reports on project progress against the approved plans and budgets, bringing to notice potential problems or delays and recommends solutions.

[*]

Reviewing and monitoring of subcontracted design and interface with other discipline.

[*]

Provide technical and engineering support and back-up to our site team during the construction stage.

[*]

Receives 'as built' information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings.

[/LIST]

Suitable Candidates can send their resume to:

Attn : Mr. Mohammed Nahid Ansari

oilfieldjobs@yahoo.co.uk

[Guest-IJT]

SOFTWARE SKILLS.
- Operating Systems : Windows 98/2000/XP.
- Plant Design software : PDS(7.03) – Piping Design modeling, Drawing Manager,
Smart Plant Review 6.1, Orthogen 7.4, Microstation 7.1 , Smart Plant 3D and LFM
- Other softwares : Auto Cad 2006 and C++.

I-DEAS 11
- Designer course with Basic Surfacing.
- Software I-DEAS with Advanced Surfacing.
- Solid Modeling.
- I-DEAS Designer with Assembly & Mechanism.
SIGNIFICANT STRENGTHS
- Team player.
- Receptive to new ideas and learning.
- Excellent Analytical and Problem Solving skills with the ability to guide and mentor a team.
- Good interpretive and oral/ written communication skills.
- Piping Designing Expertise using PDS & SP3D.
PROFESSIONAL EXPERIENCE TOTAL EXP : 5 Years & 9 Months.
ROLTA INDIA LIMITED, MUMBAI
SEPTEMBER 2007 – TILL DATE
Senior Executive (L-2)
ROLTA India Limited is one of the fastest growing IT companies in India. As CMM-5, ISO 9001, BS-1500 certified company working in the field of GIS and CAD/CAM for last 11 years; Engineering Design Business group offers solutions and services in Plant Design Detailing and 3D Modeling, Plant Design Automation, Mechanical Design Automation and Product Life Cycle Management.
Project KNPC (KUWAIT NATIONAL PETROLEUM COMPANY)
Client’s Name MOMARASAH NO : CA/3757/CNSL
Duration March 2010 To Till Date.
Project Description Modeling As Built Drawings For MAA Refinery.
Roles & Responsibilities
Involved in following Project Activities -
- Leading the team in SP3D Modeling.
- Input checking for SP3D modeling.
- Large and Small Bore pipe routing in SP3D.
- Isometric Extraction and issuing.
- Piping routing and clashes checking in SmartPlant Review.
- Modeling of Equipments in SP3D.
- QA/QC for the modeling with the link of SPR and SP3D.
- Given training for modeling in SP3D to 60 Employees.
Tools Used SP3D Modeling, LFM and SPR
Project : Receiving And Loading Facilities (RALF) For Laffan Refinery.
Client’s Name : KENTZ Engineers And Constructors, Doha, Qatar.
Duration : Jan 2010 to Feb 2010.
Project Description : Detail Engineering & 3D Modeling
Roles & Responsibilities Involved in following Project Activities -
- Input checking for PDS modeling.
- Large Bore pipe routing in PDS.
- Small Bore pipe routing in PDS.
- Isometric Extraction and issuing.
- Piping routing and clashes checking in SmartPlant Review.
Tools Used PDS 3D Modeling, SPR, Microstation and AutoCAD.
Project : MA'ADEN PHOSPHORIC ACID PROJECT.
Client’s Name : LITWIN ITALY
Duration : Nov 2008 to Jan 2010
Project Description : Detail Engineering & 3D Modeling
Roles & Responsibilities : Involved in following Project Activities -
- Checking of all Isometrics with respect to PID'S and MTO.
- QA/QC for all lines under SPR 6.1 for routine as per PIDS.
- Checking for clash report of all lines.
- Lead the QC Team.
- Checking isometric drawing extracted from PDS isogen.
- Checking physical sequence of branches, components,
equipment, and instrument as per P&ID.
- Checking Material Take off – quantity, weight, standard, material class.
- Checking routing as per design standard.
- Review the line from smart plant Review.
- Checking for Line for clash.
- Checking line support.
Tools Used PDS & SPR
Project : Khurmala Dome Development. (Degassing Station Project)
Client’s Name : DPS, Bristol, UK
Duration : Dec 2007 to Sep 2008
Project Description : The main scope include Design & Modeling.
Roles & Responsibilities : Involved in following Project Activities -
- Piping designing as per Client requirements.
- Problem solving & feasibility study of alternatives suggested by client.
- Isometric drawing extraction & Quality checking of same as per client requirement.
- Preparation of GAD's. Related Co-ordination and documentation.
- Implementation of PDS version 7.03 software for routing small bore lines & modeling.
- Gad extraction using drawing manager & Orthogen version 7.4
Tools Used PDS 3D Modeling, SPR, Microstation and Orthogen.
M/S. TECHNIC PHARMA PVT. LTD. JUNE 2005 TO SEPT 2007
Roles & Responsibilities
- To design the Pharmaceutical Machinery for sugar industry.
- To keep track various business proposals which are under evaluation, preparation or submission for improved performance of the company.
ADVANCED AUTOMATION TOOL TRAINING
Tools Duration Training Center
PDS 8.0, SP3D, SPR, Framework Plus, SPPID, SPEL, SPI & LFM 3 Months Rolta Academy, Mumbai
EDUCATIONAL DETAILS
Bachelor of Engineering
College : Bharati Vidyapeeth College Of Engineering.
University : Mumbai University, Maharashtra
Branch : Mechanical Engineering
Class : Second Class
Year of Passing : 2005
sachin.panchal AT rolta.com/psachinr AT gmail.com
The above-mentioned particulars are true to the best of my knowledge.
Sachin Panchal