AutoCAD Draughtsman Bangalore : Lincoln Helios India Ltd

[mskavi]

Lincoln Helios (India) Limited, Bangalore : AUTOCAD Design & Engineer
Website: www.lincolnindia.com

Sr. Engineer - Design & Engineering: The incumbent will be responsible for design, application engineering and project execution including techno - commercial discussions. The ideal candidate should be B.Tech / BE (Mech) conversant in AutoCAD with above 2 years of experience. Experience in designing of hydraulic power packs / capital equipments will be an added advantage.

Engineer - Design & Engineering (Electrical): The incumbent will be responsible for designing of relay based control panels, PLC, commissioning of electrical systems including integration of logic with mechanical systems. The candidate will also be responsible for site supervision for installation & troubleshooting. The ideal candidate should be B.Tech / BE (EEE) with above 3 years / DEE with above 6 years of relevant experience. Exposure to project type business and vendor interaction will be an added advantage.

Sr. Engineer – Product Development: The incumbent will be responsible for design and development of new products. The ideal candidate should be BE (Mech) with above 3 years of relevant experience in design and development of products, 3D modeling, analysis, verification, prototyping, validation, pilot batch manufacturing, documentation and process stabilization. The candidate should be conversant with AutoCAD / Solid works. Exposure to hydraulic / pneumatic (Pumps, Valves) products will be an added advantage.

Engineer - Sales & Service: The incumbent will be responsible for sales and service of capital equipments to specified market segment on an all India basis. The ideal candidate should be B.Tech / BE (Mech/Prod/EEE) with above 2 years / DME with above 3 years of relevant experience. Exposure to hydraulics / pneumatics will be an added advantage.


Engineer – Application Engineering: The incumbent will be responsible for design and application engineering activities i.e., preparation of offers, drawings, BOM, sales order creation and amendment of drawings etc., including customer interactions. The ideal candidate should be B.Tech / BE (Mech/Prod/EEE) with above 2 years / DME with above 3 years of relevant experience. Exposure to hydraulics / pneumatics will be an added advantage.

Interested candidates can send their detailed resume to:
shekhar_gn@lincolnindia.com / hrd@lincolnindia.com

Human Resources Department,
Lincoln Helios (India) Limited,
Devanahalli Road,
Off Old Madras Road,
Virgonagar Post, Bangalore - 560 049
E-mail: hrd@lincolnindia.com
Website: www.lincolnindia.com

[mskavi]

SCHNABEL DC CONSULTANTS Bangalore : AUTOCAD, HVAC Engineer

JOB PROFILE – PROJECT MANAGER

A – Project Manager
Description of job profile:
1) Accountability for accomplishing the stated project objectives
2) Key project management responsibilities includes to a) create clear and attainable project
objectives; b) to build the project requirements, c) to manage the triple constraint for projects,
which is Scope - Time – Cost
3) Supervising of ongoing planning projects
3) Main technical discussion partner of key clients and suppliers
4) Customer Relationship Management
5) Helping in the acquisition of new projects in the Datacenter market
The Candidate should have an experience background of at least 3 years in a comparable
position of Project Manager, in total at least an experience of 6-7 years working experience.
Educational / Working Background
- Successful university studies in either Electrical Engineering or Mechanical/Cooling
Engineering (B.Eng./Sc. or M.Eng./Sc.)
- Working experience as shown in B.1 (if candidate is from electrical) or B.2 B.1 (if
candidate is from mechanical)
Experience in:
• Handling multiple projects and providing project management services.
• Preparing development plan for the projects.
• Design Management.
• Project Planning
• Approval of Project budget.
• Interacting with various external service agencies.
• Preparing Master Construction Programme, procurement schedule, Project Procedure
Manual, etc.
• Preparing monthly reports.
• Heading weekly and monthly meetings with clients, suppliers and consultants.
• Preparing MIS report on a monthly basis
Skills:
- Experienced in Datacenter Model Planning
- Project Management Professional, PMI certification is welcome
- Good organizational skills
- High Level of creativity and innovation
- Sound business ethics
- Fluent in english language (written and spoken)

B.1 – Electrical Engineer background for PM (if candidate is B. Eng. electrical) – design
experience:
Requirements
· Similar experience working in Electrical Building Services Engineering involving electrical &
lighting design (SLDs), small power, plant power, earthing, lightning protection, fire alarm &
detection systems and access control.
· Experience of at least 3-4 years in the role of Electrical Engineer before achieving PM status
· You will have worked on a variety of concept and construction design schemes in a number
of different sectors.
· Able to make decisions and act on your own initiative in a pro-active way
· Good report writing skills, experience of making presentations to and attending meetings with
clients is essential

Responsibilities
· Electrical building services engineering, from concept design through to construction issue
and site supervision
· Carrying out design calculations on a variety of buildings within different sectors i.e. schools,
hospitals, leisure facilities buildings, transportation buildings
· Preparing technical specifications
· Preparing drawings for drafting by our CAD team
· Report writing
· Maintaining records and archives to company standards
· Managing your own workload
Electrical Engineer Background for Project Manager – execution experience:

Requirements
· Similar experience working in Electrical Building Services Engineering involving electrical &
lighting design (SLDs), small power, plant power, earthing, lightning protection, fire alarm &
detection systems and access control.
· Experience of at least 3-4 years in the role of Electrical Engineer before achieving PM status
· You will have worked on a variety of construction works in a number of different sectors.
· Able to make decisions and act on your own initiative in a pro-active way
· Good report writing skills, experience of making presentations to and attending meetings with
clients is essential

Responsibilities
· Electrical building services engineering, construction works and site supervision
· Organizing for carrying out execution works on a variety of buildings within different sectors
i.e. schools, hospitals, leisure facilities buildings, transportation buildings
· Report writing in terms of project management
· Maintaining records and archives to company standards
· Managing your own workload
The Individual
· Ability to adapt to different cultures and working environments to build rapport with customers
· Experience of using written and spoken, English within a business environment


B.2 – HVAC Engineer Background for PM (if candidate is B. Eng. mechanical) – design
experience:
Requirements
· Degree qualified in Mechanical Engineering or similar. Similar experience working in
Mechanical Building Services Engineering involving heating, ventilation, air conditioning,
fire alarm & detection systems and access control.
· Experience of at least 3-4 years in the role of HVAC/Mech. Engineer before achieving
PM status
· You will have worked on a variety of concept, scheme and construction design schemes
in a number of different sectors.
· Able to make decisions and act on your own initiative in a pro-active way
· Good report writing skills, experience of making presentations to and attending meetings
with clients is essential

Responsibilities
· Mechanical building services engineering, from concept design through to construction
issue and site supervision
· Carrying out design calculations on a variety of buildings within different sectors i.e.
schools, hospitals, leisure facilities buildings, transportation buildings
· Preparing technical specifications
· Preparing drawings for drafting by our CAD team Report writing
· Maintaining records and archives to company standards Managing your own workload
HVAC Engineer Background for Project Manager – execution experience:

Requirements
· Degree qualified in Mechanical Engineering or similar. Similar experience working in
Mechanical Building Services Engineering involving heating, ventilation, air conditioning,
fire alarm & detection systems and access control.
· Experience of at least 3-4 years in the role of HVAC/Mech. Engineer before achieving
PM status
· You will have worked on a variety of concept, scheme and construction schemes in a
number of different sectors.
· Able to make decisions and act on your own initiative in a pro-active way
· Good report writing skills, experience of making presentations to and attending meetings
with clients and design team

Responsibilities
· Mechanical building services engineering, construction issue and site supervision
· Organizing for carrying out works on a variety of buildings within different sectors i.e.
schools, hospitals, leisure facilities buildings, transportation buildings
· Maintaining records and archives to company standards Managing your own workload
· Report writing in terms of project management
The Individual
· Ability to adapt to different cultures & working environments, build rapport with
customers
· Experience of using written and spoken English within a business environment

Web site :http://www.schnabelag.in/index.php

SCHNABEL DC CONSULTANTS INDIA PRV. LTD.
Girija Building
No. 817, 80 Feet Road, 20th Main, 8th
Block, Koramangala,
Bangalore - 560 095
India
Phone: +91 (0) 80 / 4247 1000

Email: zentrale@schnabelag.de
india@schnabelag.com

[mskavi]

Maars Resources Bangalore : CAD Designer
Website: www.maarsresources.com

Job Description:
Design of 2D,3D in AUTOCAD.
- Engg. Design in software like catia, corel, photoshop etc.
- cordination with client & sales team.

Desired Candidate Profile:
Knowledge of 2D & 3D AUTOCAD
- Knowledge of Engg. design software catia, corel, photoshop

Bangalore
Tel : +91 80 42423535
Fax: +91 80 42423500
Email: info.in@maarsresources.com praveena.acharya@maarsresources.com
Web: www.maarsresources.com
No.13, 2nd Floor, 80 Feet Road End
HMT Layout, R.T. Nagar, Bangalore 560032,
Karnataka - India

[mskavi]

Feedback Ventures Private Limited Bengaluru/Bangalore : CAD Draughtsman Bridge - Bangalore
Website: http://www.feedbackventures.com

Job Description:

• Preparation of General Arrangement Drawing and Layout of Approaches, Road Cross-section of Various Flyovers, Bridges.
• Drawings of both open as well as Pile Foundation.
• Working Drawings of Pier, Abutment, Elastomer Bearing & all types of Bearings for Flyovers and Bridges.
• Drawings of Superstructure ( PSC Girder, Box Girder, Solid Slab, Deck Slab over PSC girder)

Desired Candidate Profile:

• Diploma(Civil) / ITI (Civil Draughtsmanship) / Diploma(Autocad)
• 4 to 7 years experience in projects related to Bridge Design.

Address:
New Delhi
Feedback Ventures (P) Ltd.
Feedback House 7, Local Shopping Centre,
Panchsheel Park
New Delhi - 110 017
Tel : 011 42009100
Fax : 011 42009123
Contact : Alpana Sagar
E-mail : alpanas@feedbackventures.com

Bangalore
Feedback Ventures (P) Ltd.
No: 805, South Block
Manipal Centre, Dickinson Road
Bangalore - 560 042
Tel : 080 4132 0988
Fax : 080 4132 0989
Contact : Gujulla Padmaja
E-mail : gpadmaja@feedbackventures.com

Chandigarh
Feedback Ventures (P) Ltd.
Third Floor SCO 13 to 15
Sector 34 A
Chandigarh 160 022
Tel : 0172 507 4846
Fax : 0172 507 4847
Contact : Anil Gandhi
E-mail : anilgandhi@feedbackventures.com

Hyderabad
Feedback Ventures Pvt. Ltd.
3rd Floor, Central Plaza
Rajbhavan Road
Somajiguda
Hyderabad-500 082
Tel : 040-2341 5085
Fax : 040-2341 5084
Contact : Y Srinibas
E-mail : ysrinibas@feedbackventures.com

Mumbai
Feedback Ventures Pvt. Ltd.
2nd and 3rd floor
Times Square Building
Western Express Highway
Andheri (East)
Tel : 022-26844682
Fax : 022-26844354
Contact : Amrita Kumar
E-mail : amritak@feedbackventures.com

[mskavi]

Jainco Inks and Chemicals Bangalore : AutoCad Mechanical Design Engineer
Website: http://www.jaincouv.com/

Post : AutoCad Mechanical Design Engineer
Location : Bangalore
Minm Education : Engineering degree ( BE / Btech)
Minm Experience : 5 years
Skills required :
Production floor experience
Design experience
AutoCad knowledge
Microsoft Office, email
Vendor development
Salary : As per industry standards.

Email Address: team@jaincouv.com

JAINCO INDUSTRY CHEMICALS
JAINCO INKS & CHEMICALS
B-126, ITI / Dyavasandra Industrial estate,
Mahadevapura, Bangalore -560048, India.
Tel :080-2851 8562 / 2851 5104
Fax:080-2851 8562
e-mail: sales@jaincouv.com


Delhi Office
Shop No. 114, Vardhman Mayur Market,
Mayur Vihar, Phase - 3
New Delhi -110096
Tel - 98719-56442
98108-04599

[Guest Poster]

I am a senior Draghtsman, wrking in Singapore since 1995. I have working experience in India, Saudi Arabia and presently in Singapore. Experienced in 2d Drafting with AutoCAD and Microstation. Now I want to settle back in Kerala and looking for a suitable post. I have total 21 years of experience.


Sincerly yours
Aniyankunju P.U.

[tauqir]

Dear Employer:
In response to your email through regarding the AUTO CAD DRAFTSMAN in your organization I am enclosing a resume for your review. Please consider this letter as my formal application presenting my background, education and experience.
I have over 2 years experience in the field of drawing in the engineering department; and I am well versed on AutoCAD 2010.
I would like also mention here that I also achieved the certificate as best craftman in mechanical draftsman in my state.
During my job period in saudia Arabia I trained some new recruiters also.
May I arrange an interview to further discuss my qualifications? I am available for an interview at a mutually convenient time.
Thank you for your time and consideration.
Expected salary –
Outside India - $1000(excluding all the allowances) monthly plus over time
Within India - Rs. 15000 (excluding all the allowances) monthly plus over time
Sincerely,
Md. Tauqir Akhtar

[Guest]

JINU VARGHESE +914692666546 jinuvarghesen AT yahoo.com jinuvarghesen AT gmail.com
Cad Engineer Professional
ENGINEER WITH AUTOCAD DRAFTING EXPERIENCE
Overview
More than 3Years experience as Cad Engineer, Design & Drafting Executive, Quantity Estimator in Qatar and Saudi Arabia. I have achieved commendable job experience in these fields. Technically proficient in MS Word, Excel, Outlook, PowerPoint and internet.
Objective
Seeking a rewarding and challenging position in Engineering/Design tasks in an esteemed company where I can bestow my adeptness in Technical tasks.
Profile :
A hardworking candidate with sound & hands-on experience in Architectural, Civil & Mep Coordination Drawings & Interior Designing works & Knowledge in mechanical & able to work on own initiative or as a part of team.
EDUCATIONAL BACKGROUND.
Bachelor Degree(B.E) in 1999-2003, Karunya Institute of Tech. Bharathiyar
in Mechanical Engineering University, Coimbatore, Government of Tamilnadu,
India. (7.54/10) CGPA-First Class


Certificate in AutoCAD : 2004,Diagonal Cad Centre,Aiema Technologies, Ambattur,Chennai,India. Grade-A
Secondary : 1999- VCHS School,Chennai,Tamilnadu,India.
(87.4%)
S.S L.C : 1997- VCHS School,Chennai,TamilnaduBachelor
(86.2%)
EMPLOYMENT RECORD.
Total Experience – 5.5years (3.5yr-Gulf & 2yr-India)
1. Organization : AL-LATIFIA TRADING & CONTRACTING –Construction; P.O. Box - 57588, *Riyadh 11584,* Saudi Arabia

Designation : CAD Engineer/Coordinator-Draftsman
Since 26-Jan-2009 to Till Date (07 Months)
The Group is Main Contractor for Omrania Consultants at present working on GOSI(General Organisation Social Insurance) Project.They have also various other projects in construction like hospitals,malls.
Duties & Responsibilities
1. Use Auto-CAD (R2007& 2008) in preparation of shop drawings, in accordance with consultants design drawings.
2. Preparing As Built Drawings according to the Engineers Instructions.
3. Assisting Senior Engineers in preparation of Shop drawings and plotting to Layout & producing in time.
4. Preparing Site Setting Coordination drawings, Coordination Mep Drawings,Architectural drawings.
5. Assisting & Coordinating Junior Draftsman for the completion of shop drawings.
2. Organization : FAWAZ AL HOKAIR REAL ESTATE –Construction; P.O. Box - 341904, *Riyadh 11333,* Saudi Arabia
Designation : AUTOCAD Engineer.
Since 28-Jun-2008 to 05-Feb(07 Months)
The Group is well known in the field of Real estate development and construction such as Shopping malls and Hotels.
Duties & Responsibilities
1. Use Auto-CAD (R2006& 2007) in preparation of shop drawings, in accordance with consultants design drawings.
2. Preparing As Built Drawings according to the Engineers Instructions.
3. Assisting Senior architects in preparation of Shop drawings and plotting to Layout & producing in time.
4. Quantity survey of materials wrt drawing like Floor tiling, Wall tiling, Skirting, Celing,Handrails,Mouldings,Doors,Windows,Toilet Details etc.
5. Area Calculation of Various Plans of Malls, Hotels and Villas
2. Organization : Kaseem Darwish Fakhroo & Sons Company,KDS Group, ( for Gulf Timber&Joinery Co. w.l.l & Darwish Mechanical&Electric Comp(Dmec), Doha, Qatar.
Designation : AutoCAD Draftsman & Estimator
Since 17-May-2006 to 17-Nov-2007 (1Years and 06 Months)
The Company is a leader in the Middle East in the Wood design with the name Gulf Timber&Joinery Co.,They have various projects In Qatar Foundations, Al-Khobar, Asian Games at Khalifa Stadium, Hamad Hospitals in many fields Such as Mechanical & Electrical Company for HVAC,Marble company,GRC Company,etc.
Duties & Responsibilities
1. Use Auto-CAD (R2006& 2007) in preparation of working shop drawings.
2. Prepare Shop Drawings of all Interior Design & Exterior Fitouts such as Doors(Fire rated & Non Fire Rated),Cabinets,Counters,Wall Cladding,Wall Panelling,Staicase designs such as Balusters,Handrailing,Posts.Mashrabia Screens,Skirtings,Design Tables,Sofas,Beds.etc According to the Client defined requirements.
3. Preparation of Cutting Tickets regarding the workorder assigned after the drawing Approval from the Design head and the Manager.
4. Issuance of Cutting Tikcets and Drawings to the Factory for Production.
5. Co ordinate With Site Supervisors, Foremans of Various Departments such as Prodcuction ,Joinery ,Carving, Spray shop& finishing w.r.t workorder assinged
6. Assisting Design Head for the changes and repair works in the drawing.
7. Prepare Bill of Quantity based on actual and contract requirements.
8. Co ordinate with Site Supervisors for the fixing of the Job in appropriate time ,and attending their needs for the early installation.
9. Preparing all kind of HVAC system shop drawings. Ex :- Central system, Split unit system,Package Unit system, Ventilation system, Fresh air system etc.
10. Preparing the accurate scale’s enlarged details for construction
3. Organization : Apex Technologies (P)Ltd.Egmore,
(Consultant for Telecommunication Project)
Chennai, Tamilnadu
India
Designation : AutoCAD Executive

Since 01-Feb-2005 to 20-May-2006 (One Year & 03Months)
Role :
Data capturing/Digitalization of graphical utilities using IDDS in Microstation / Auto CAD.
My role is in Outside Plant permanent loctaion project where to capture Graphical utilities like cables, poles and terminals and conduit for the Cable telecommunication network systems using AUTOCAD and Microstation software versions, & also check error through SQL corrections and submitting the Quality defined Output file
4. Organization : D.S.M Soft (P) Ltd.,Trichy,Tamilnadu,India
(Consultant for Power Distribution Project )
Designation : Junior CAD Executive.
15-May-2004 to 14-Dec-2004 (Nearly 06 Months)
Role :
My role in this company is QC for conduit markup process for the graphical placements of the utilities like cables and conduits for the electric network system project called “BEWAG”.
Using AutoCad-2004/Microstation 7.1 Version softwares
The raster images which is the source to be captured in Vector format using the above mentioned software to place the utilities in the exact position Data capturing/ Digitilization of graphical utilities using Microstation/Auto CAD.
5. Organization : Ennore Thermal Power Station,Ennore,Tamilnadu,India
(Consultant for Power Distribution Project)
Designation : Site Engineer.
21-Sep-03 to 14-Dec-2003 (Nearly 03 Months)
Role :
Worked in Thermal Power Plant as Supervising Engineer for (Priya Enterprises Contracting Company ),Ennore,Chennai for Strengthing of the Motor Bed Project .There was the loss in the Gear tooth which cause breakage, which in turn caused foundation damage.I had been worked in Utilization of Man power for the completion of the project in appropriate time.
Also for the Execution of motors and other machineries experienced in the quality control ,checking and monitoring of the progress of the different mechanical works related to the project.

[Guest]

Curriculum Vitae
Mohan Kumar. G
Email Id : mailmenow_gmk AT yahoo.com

Objective. :-
Never say impossible Attitude & services focused for a long run credentials.
Educational Background :-
Academic :
Level : Diploma (AIME)
Field : Mechanical Engineering
Year of completion : April 1999
Location : Govt. Tool Room and Training Centre. Bangalore.
Professional

Level : Auto CAD 2000 / 2008, 2D & 3D Modeling,UG NX
Certification : January 1999 (Auto CAD R13) & Aug 2009 (UG NX)
Location : GTTC – Bangalore & Access - Chennai
Employment History :-
- Company : M/s. Madhu Engineering Works. ( Bangalore )
Specialization : Tool Designing.
Function : Tool Engineering.
Company Activity : Engineering Industry
The Company is basically engaged in designing and Development of press Tools pertaining to various Industrial
Applications.
Reporting to : Managing Director
Duration. : 1.7 Years (From Jun. 1999 to Jan 2001.)
- Company : M/s. Terions Enterprises ( Bangalore )
Specialization : - Design Engineer / Site Supervisor.
Job Description : Design and design calculations.
Creation of 2D Drawings for Prototype
Manufacturing and production.
Modification based on review and feed back from site.
Software : Auto CAD 2000/2004.
Function : Engineering.
Company Activity : - Company is involved in Designing, Manufacturing &
Installation of Air Intake Systems clean room Applications,
Ventilization & Air Conditioning Systems, Intake and Industrial Exhaust Systems & For MW Desile Engine
Reporting to : Managing Director.
Duration : 2.4 Years (From Feb 2001 to Jun.2003)
- Company : M/s. ENSS Services (Sub Contract of THERMAX PUNE)
Title : - Boiler Designer, Pressure Parts ,Structural Drawing,
Ducting & Refractory, Insulation Drg.
Reporting to : Project Engineer
Duration : Joining date July 2003.to Aug 2006 `3.0’Years
- Company : M/s THERMAX ENGINEERING DESIGN CENTER
Title : - Boiler Designer, Pressure Parts ,Structural Drawing,
Ducting&Refractory,InsulationDrg. Reporting To : Project Engineer
Designation : Deputy Executive (Designer)
Duration : 01st Aug 2006 to 24th Aug 2007 ‘1.0’ YEAR (Chennai)
Present Company : M/s. ISGEC JHON THOMPSON (Chennai)
Title : - Boiler Designer, Pressure Parts,Structural Drawing,
Ducting & Refractory, Insulation Drg. Reporting To : Project Manager
Designation : Promoted as ENGINEER (CHECKER) from
ASSISTANT ENGINEER on Feb 2008
Duration : Joining date 27th Aug 2007
- Nature Of Work
- Ducting Layout Expantion Joint Fixing Damper For Over All Boiler.
- Steel Structural Supporting Over All Ducting, Hopper, Esp.
Water Wall, & Steam Drum.
- Preparing & Checking Of Fabrication Detail Drawings.
- Sling Rod, U Rod & Spring Support.
- Over All Piping Layout & General Arrangement Of Piping.
- Saturated Steam Piping For Drum & Primary Superheater.
- Link Piping From Primary Super Heater To Secondary Super Heater.
- Feed Water Piping For Economise, Steam Drum & Water Wall.
- Worked Project
- M/S. ESTEEL 28 tph Bi-Drum Oil & Gas Fule Fired Boiler.
- M/S. SLR STEEL 47 tph, Bi-Drum Oil & Gas Fuel Fired Boiler.
- M/S. BUSHAN STEEL LIMITED 140 tph, Bi-Drum AFBC Coal Feed Boiler.
- M/S. KCP 100 tph, Bi Drum Travelling grate Boiler.
- M/S. RELIANCE JAMNAGAR 130 tph, Oil & Gas Fired Boiler.
- M/S. VISHWANATH SUGARS - 80 tph, Bi-drum, bagasse Fired Travelling grate Boiler.
- M/S. HIRANYAKESHI-100 tph, Bi- Drum , Bagasse Fired Travelling grate Boiler.
- M/S. VIJAYANAGAR SUGARS -120 tph, Single-Drum, Travelling grate Boiler.
- M/S. SHREE DATTA - 180 tph, Single-Drum, Travelling grate Boiler.
- M/S. SANJOG SUGAR & ECO POWER - 47 tph, Bi-Drum, Travelling grate Boiler.
Complete Experience : 12 Years’.

[Guest]

Sir,
I have 19 years experience in autocad related jobs. Finished a five year course in architecture.1985-1990. 10 years experience in UAE.Worked last six years in AECOM in Dubai, in land development department, structural department and marine and ports department. Able to create architectural designs if needed. knowledge of microstation, 3ds, archicad, word, photoshop,excel,power point etc.I would like to work as a cad manager cum senior cad draughtsman who is ready to make architectural designs also.
mmfisal AT gmail.com

[Unregistered]

Name -sunil pal
S/o-shiri suresh pal.
Address-ganesh nagar
City-saharanpur
Education- i.t.i from government i.t.i saharanpur
Intermediate pass from government inter college
Education certificate course-auto cad 2d and 3d