www.wpil.co.in Ltd Kolkata : ROTATING EQUIPMENT MECHANICAL DESIGN ENGINEER

[Admin]

wpil ltd Kolkata : SENIOR MANAGER-MECHANICAL DESIGN
Website: http://www.wpil.co.in
wpil.co.in

Designation: SENIOR MANAGER-MECHANICAL DESIGN
Experience: 10 - 15 Years
Location: Kolkata

Job Description:
EXPOSURE IN DETAILING AND DRAWING OF MECHANICAL DESIGN COMPONENTS, ROTATING EQUIPMENT COMPONENTS, PREPARATION OF BILL OF MATERIALS OF ENGINEERED EQUIPMENT.

Desired Candidate Profile:
SHOULD HAVE EXPERIENCE IN DETAILING AND DRAWING OF MECHANICAL DESIGN COMPONENTS,ROTATING EQUIPMENT COMPONENTS, PREPARATION OF BILL-OF MATERIALS OF ENGINEERED EQUIPMENT.

Company Profile:
WPIL Limited, formerly known as Worthington Pump India Limited and a leader in pumps and pumping systems, is further expanding it's facilities in Kolkata. The Company requires dynamic,motivated professionals for it's expanding operations.

Address: wpil ltd
TRINITY PLAZA, 84/1A,TOPSIA ROAD(S)
KOLKATA,West Bengal,India 700046

Email Address: recruit_wpil@rediffmail.com

Keywords: MECHANICAL DESIGN, ENGINEERING, SENIOR MANAGER.ROTATOR.

More MECHANICAL DESIGN Jobs in India

[Guest]

Resume
JAYANTA SAHA

Email ID
jayanta_789 AT yahoo.com
Joining Time :30 Days
Objective
- To join a responsible position for the belonging organization with working in a challenging environment, where not only my knowledge but also working ability will find a chance to expose and thus to become a part and parcel to the reason of global development.
Professional Qualification
- Diploma in MECHANICAL ENGINEERING from Engineering Institute For Junior Executive(E.I.J.E)
Kolkata, in The year of 2006 with 70% marks(1st class)
- ASNT Level –II qualified in Radiography Testing(RT) from ID&RL(KOLKATA),Ultrasonic Testing(UT);Magnetic Particle Testing(MPT);Dye Penetration Testing(DPT);Visual Testing(VT)
- American Safety & Health Institute(ASHI) Trained From IBC Center ,Dubai, UAE
Technical & Computer Skills
- Software : AUTO CAD-2007 Software From E.I.J.E
- Operating Systems : Windows XP, 2007.
- Microsoft Office : MS Word, MS Excel, MS PowerPoint.
Areas of Interest
- QA/QC by implementing ISO procedures.
- ASME , IS , DIN , BS Standards/ Codes.
- Handling measuring instruments like vernier caliper, micrometer, depth vernier, dial gauge etc.
Hobbies
- Music
- Sports – football, Cricket, Chess, Carom.
- Reading magazines, Newspapers.
- Educational Qualification :-
Diploma in Mechanical Engineering from Engineering Institute For Junior Executive (E.I.J.E), KOLKATA through West Bengal Council Of Technical Education (W.B.C.T.E)-Approved by-All India Council Of Technical Education – (A.I.C.T.E)
- About –auto cad-Isometric ,2d,3d-modelling
- WORKING EXPERIENCE :-
- Organization : Gulf Engineering Industry
- Organization Profile :Manufacturer of Pressure vessel(ASME coded/un coded);Tanks&
Execution of shop fabrication & field assembly of Power Boilers according
To ASME Sec- VIII Div- I & ASME B31.1, accredited by ‘U’ & ‘S’ Stamp
Besides machining of different machine parts & equipments.
- Group : Easa Saleh Al Gurg (Dubai ,U.A.E)
- Designation :Quality Controller (Production/manufacturing)
- Duration : April2010-till date
- Job Profile :working as QC Inspector
- Job Executing
a) Review of design & drawing as per ASME Sec-VIII Div-1
b) Preparing & Reviewing of NDE procedures along with personnel qualification records
c) Preparing & selecting WPS, PQR, and WPQR for the specific job requirement considering all essential & nonessential variables following ASME Sec-IX.
d) Qualifying welders as per approved WPS, maintaining welders/welding operator continuity log
e) Preparation of weld map for particular job requirement.
f) Preparing Inspection & Test Plan (ITP) following procedures & project specification (if any)
g) Fit-up monitoring ;inspecting weld visual, dish-end forming/blanking inspection by template; checking of plate rolling along with monitoring other parameters ongoing manufacturing process
h) Inward material inspection along with its certificate review as per ASME Sec-II PartA, partC ASME B16.5; 16.9; 16.11; 36.1 & preparing traceability report.
i) Radiographs interpretation as per ASME Sec-VIII Div-1, UW-51 & 52
j) Monitoring Hydro test & closing NCR (if any)
k) Measuring different machined job using variety of measuring instruments of different ranges.
l) In House Calibration program of Measuring Instruments & Welding Machine by establishment of relevant procedure & standards along with employing instruments as master.
m) Played an active role of a Quality Personnel to make successful achievement for accreditation of ‘U’ ‘S’ stamp to the aforesaid organization through demonstration of Pressure vessel manufacturing following ASME code rules & regulations to the ASME Auditor in the year of 2011.
- Project : - 2 X 406.5 TPH 2 nos. Utility Boilers & 5 nos. of HRSG & Auxiliaries at Indian Oil & Corporation Ltd.(IOCL ) at naphtha cracker project Panipat
- Designation : Assistant Engineer Project (QC).
- Company : UB Engineering Ltd, (A UB Group) Pune, Maharashtra.
- Duration : (NOV, 2007 to Till date.).
- Job Profile :
Working in Panipat Naptha Cracker Project, IOCL Panipat.
- Responsibilities :-
a) Preparation of WPS & PQR following approved WPS by EIL (Engineering India Limited) & testing of welders along with welder’s Performance valuation. Conducting tool-box meeting for welders.
b) Material Inspection. Fabrication of pipes as per drawings. Inspection of Job as per Client requirement and ASME Codes & Preparation of Line History Sheet for Hydro test Pack
c) SR chart checking with hardness checking using calibrated block, Film interpretation,DPT,Positive Material inspection
d) Fit-up checking, weld-visual checking, line-tracing for MC clearance in time of hydro test.
e) Incoming material inspection, TC of welding consumable & NDT materials.
f) Welding & NDT inspection of pipe joints along with PWHT chart & hardness checking.
g) Interpretation of Radiographs
h) Welding inspection & DPT inspection of structural fabrication & erection work.
i) Material reconciliation, calculation of support weight utilizing unit weight along with monitoring the submitted bills of radiography agencies.
j) Preparing summary sheet, abstract, invoice, covering letter besides making measurement sheet of radiography joints on the basis of systems.
k) NDT clearance of the fabricated spools for the erection
l) MC & NDT clearance for loop &line clearance.
m) Preparing daily progress report, reference meeting, biling, planning etc.
- Project : - JINDAL STEEL & POWER LTD.(J.S.P.L)Capable of producing plate with India’s maximum width-range(3759mm).1million TPA plate production.
- Designation : Junior Engineer Project (Erection &Commission).
- Company : UB engineering Ltd, (A UB Group) Pune, Maharashtra.
- Duration : (NOV, 2006 to NOV2007.)
- Job Profile
Worked in the project of Jindal Plate mill at Raigarh, (chattishgarh) C.G.
Responsibilities :-.
a) Going through civil drawings
b) Inspection of front according to the drawing plan & lay-out
c) Inspection of levels of fronts by employing theodolytes
d) Going through mechanical equipment drawings
e) Indentation of equipments & accessories as per drawings
f) Erection planning
g) Fabrication of chutes & erection
h) Checking of alignment of various equipments & motors
i) Erection & commissioning of furnace, levelers ,heavy levelers ,end shear ,transfer table, UT testing machine, rotary shear,
j) Man power handling
k) Documentation with billing
- Organization : Baljit Engg. Pvt. Ltd.(KOLKATA)
- Designation :QC Engineer(PRODUCTION)
- Duration : sep2006-nov2006
JOB Profile - nozzle and can is prepared for refractive Index which is utilized to transfer molten metal
- Responsibilities:-
- I used to check the measurements of cans & nozzle which is required 100% accuracy in shape.
- Hardness testing employing brinell hardness testing machine
- Organization : G.D. spring & pvt. Ltd.(KOLKATA)
- Designation :QC Engineer(PRODUCTION)
- Duration : JULY2006-SEP2006
JOB Profile: Monitoring walking beam furnace &batch furnace, forging machine, quenching machine hardening machine, peening machine, UT tests, DPT testing, MPT testing.
- Responsibilities: -
- Testing of tensile& compressive load for the spring
- Hardness testing employing brinell hardness testing machine
- PROJECT: -Final year project is: BELT CONVEYOR Involving hydraulic mechanism.