Rve Technologies Bangalore : Fresh Mechanical PROE/UG/CATIA Trainee Engineer

[mskavi]

Rve Technologies Bengaluru/Bangalore : fresh mechanical engineer
Website: http://www.rvetechnologies.net

Designation: fresh mechanical engineer
Experience: 0 - 5 Years
Location: Bengaluru/Bangalore

Job Description:
Wanted Fresh BE(MECH)/DME for Design centre,Training and Recruitment
on Proe/catiav5/Unigraphics,Salary 15k+.Details call - Vijayanagar 9900594783,Jayanagar 64503986

Desired Candidate Profile:
Fresh OR Experience graduate / diploma (mechanical/automobile/IP)

Company Profile:
Wanted DME/BE(mech) for Training cum Recruitment on PROE/UG/CATIA to work in MNC, required mechanical engineers and diploma holders, good knowledge of Design concept, technical writing ,ability to learn new things, Experience in mechanical industries

Keywords: cad engineer , engineer , software engineer , trainee engineer

[Guest]

Tushar Chandrakant Marathe
Email :tushar.hag AT gmail.com

OBJECTIVE :
In search of position of engineering graduate that will offer me excellent opportunity and challenge

EDUCATION :
Bachelors Degree in MECHANICAL ENGINEERING KARMAVEER BHAURAO PATIL COLLEGE OF ENGG.&POLY. SATARA

ELECTIVES :
FOR 7th SEMISTER : Total Quality Management (TQM) Experimental Stress Analysis (ESA)
FOR 8thSEMISTER : Marketing Management Automobile Engineering

PROJECT FOR B.E.
Project Name : PNUMATIC MARKING MACHINE Client name : ABHIJAT ENGG. SATARA Team size : 5 Duration : 1 Year
- It is modification of manually operated machine used to put vendor mark on product.
- Machine is provided with pneumatic cylinder to move the slide assembly to which the punch is attached.
- Machine uses basic principle of “Rack & Pinion”. Here pinion (job or push rod) is kept stationary rack (punch) is reciprocated over pinion surface.

COMPUTER SKILLS :
General Microsoft Word, Microsoft Excel, Tally, Power point, D.T.P.
Programming Languages C,C++
Operating System MicrosoftWindows,MSDOS,WindowsXP
Design Software CATIA, AutoCAD

EXAM DETAILS :
Exam Passed School/College University/Board Marks Obtained Year Of Passing :
B.E. K.B.P.College of Engg. &Poly.Satara. Shivaji University 64.18% May 2009
H.S.C. Kisanveer Mahavidyalaya,Wai. Kolhapur. 63.67% March 2005
S.S.C. T.L.Joshi Vidyalaya,Wai Kolhapur. 77.86% March 2003

PERSONAL DETAILS :
Date of birth : 01/05/1988
Nationality : Indian
Gender : male
Marital Status : single
Languages known : English, Hindi, and Marathi

OTHER INTERESTS :
Trekking, Watching cricket.

DECLARATION :
I hereby declare that the above information is true to the best of my knowledge.
PLACE :Wai.
Marathe T.C.

[Guest]

SABARISH KUMAR GANDIKOTA
E-MAIL : gsabarishkumar AT gmail.com

OBJECTIVE :
Desire a position in your organization through which my knowledge spectrum may be enhanced, fully utilizing my abilities and skills, and help me in contributing my best to the development of the company as well as to my personal growth.

EDUCATION :
M.Tech, Machine Design,Mechanical Engineering , IIT Madras, 2009, CGPA 7.33/10
B.Tech, Mechanical Engineering, KSRM College of Engineering, SV University, 2007, 77.6%
Intermediate, Vikas Junior College, Board of Intermediate Education AP, 2003, 93.3%
SSC, Bharathi Vidya Mandir High school, Board of Secondary Education AP, 2001, 87.6%

TECHNICAL SKILLS :
Packages : AutoCAD, MATLAB, ProE, Gambit, Fluent,Hypermesh and ANSYS.
Operating Systems : Microsoft Windows, Linux
Programming languages : C,C++

PROJECTS :
M.Tech
B.Tech

Project title : “Stress analysis of reheater vertical spaced outlet header under self-weight, internal pressure and thermal loadings.”
Description : The header is used as steam collector in boiler power plant. It collects the steam from a number of small inlet tubes and sends it through big outlets for the next stage of operation. The aim of the project is Thermo-Mechanical analysis of the header.

Responsibilities : Modeling the header in ProE.
Meshing the fluid domain and defining the boundary conditions in Gambit.
CFD analysis in Fluent for determining the temperature distribution.
Exporting the temperature profiles to ANSYS and calculating the temperature distribution in the header.
Applying the loads and determining stress distribution in ANSYS.

Project title :
“Design and stress analysis of helical gear.”
Project Description :
Calculating the dimensions of helical gear for the given power by using C programming is done. Modeled the helical gear in IronCAD. Exported this model to ANSYS and determined the stress distribution.

ACADEMIC ACHIVEMENTS :
Ranked All India 61st in GATE 2007.
Ranked All India 244th in GATE 2006.
Ranked 3rd in B.Tech.in Mechanical Engineering among 120 students.

NON-ACADEMIC AND EXTRACURRICULAR ACTIVITIES :
MS/PhD website coordinator, Department of Mechanical Engineering, IIT Madras.
Active member of ROBOSIND(Robotics club).
Chess captain, Sindhu hostel, IIT Madras.
Coordinator, Sindhu Sandhya.
Bagged 1st prize in Ramanujan quiz held at district level.
Bagged 1st prize in chess in the Vikas chess championship held at Vikas junior college.
Bagged 5th position in Open IITM Chess tournament.

PERSONAL DETAILS :
Date of birth : 1st July, 1986
Interests and hobbies : Playing chess and cricket
Languages known : English, Hindi and Telugu

[dhaval_mech07]

CURRICULUM VITAE
DHAVAL.U.PANDYA
E-Mail Id : dhaval_mech07 AT yahoo.co.in

Career Objective :
To secure a challenging position, where I can effectively contribute my skills as a Mechanical Engineer.

Educational Qualifications :
Examination Discipline/ Specialization School/college Board/ University Year of Passing % Obtained :
B.E. Mechanical Engineering Government Engineering College, Bharuch Veer Narmad South Gujarat University Surat 2009 61.72%
H.S.C. Science New Heaven Vidyalaya, Waghodia Road,Vadodara. G.H.S.E.B 2004 64.15%
S. S. C S.S.C Shri Mahatma Gandhi Vidyalaya, Bhalod G.S.E.B 2002 77.14%

Additional Qualification :
- Foundation course on AUTO-CAD From CADD CENTRE, BHARUCH.
- Diploma course on PRO/ENGINEER & ANSYS From CADD CENTRE VADODARA.

Academic Project : Design, Modelling & Analysis of I.C.Engine Parts using AUTO-CAD, PRO/E & ANSYS softwares.
Academic Seminar : Laser Micro-Machining.

Vocational Training :
- Oil & Natural Gas Corporation (ONGC),Gandhar.

Industrial Visits :
- Hydro Power Plant, Sardar Sarovar Dam, Kevadia
- Modi Foundry, Bharuch

Personal Profile :
Name : Dhaval. U. Pandya
Father’s Name : Umesh. P. Pandya
Gender : Male
Marital Status : Single
Languages known : English, Hindi, Gujarati.
Date of Birth : 02/09/1987
Age : 22 years
Hobbies : Singing, Reading, Playing Outdoor
Games & Travelling.

Declaration :
I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.
Dhaval Pandya

[PRIYANKA THOMAS]

PRIYANKA THOMAS

TECHNICAL SKILLS :
Mechanical Software Proficiency : AutoCAD, Pro/E , CATIA (CADD CENTRE)
Operating System : WINDOWS XP
Word Processing & Documentation : MICROSOFT WORD
Slide Presentation& Graphics : MICROSOFT POWER POINT

AREA OF INTEREST :
COMPUTER AIDED DESIGN.

ACADEMIC MINI PROJECT :
TOPIC : Design and Fabrication
TITLE : Pneumatic U bending machine
DURATION : Jan2008-April 2008 (6th semester)
TEAM SIZE : 3
DESCRIPTION : A sheet metal sandwiched between male and parts of the die having a U profile is bent to a U shape using Pneumatic force.

ACADEMIC PROJECT :
TOPIC : Design and Analysis of transportation structure for IHX (Intermediate heat exchanger) used in Prototype Fast Breeder Reactor.
COMPANY : BHAVINI (KALPAKKAM)
PROJECT GUIDE : T.K. MITRA {ASSOSCIATE DIRECTOR (TECHNICAL)} BHAVINI.
DURATION : Jan 2009- April 2009 (8th semester)
TEAM SIZE : 4
DESCRIPTION :
IHX (Intermediate heat exchanger) is a critical component of Prototype Fast Breeder Reactor. It has a dimension of (2000×180500 mm) and self weight of 42.5 tones. It has to be transported safely from Maharashtra to Kalpakkam.Our project is to design and analyze a suitable transportation structure for IHX using Pro/E and ANSYS softwares.

INDUSTRIAL VISITS :
- ASHOK LEYLAND-ENNORE
- IGCAR-KALPAKKAM
- ISRO-SRIHARIKOTTA
- FORD
- BHAVINI-KALPAKKAM

CO-CURRICULAR ACTIVITIES :
- A member of Mexcellere (MECHANICAL ASSOSCIATION IN COLLEGE).

HOBBIES :
Surfing the internet and listening to music.

PERSONAL DETAILS :
FATHER’S NAME : M.T. THOMAS
DATE OF BIRTH : 24-12-1987
NATIONALITY : INDIAN
LANGUAGES KNOWN : ENGLISH, MALAYALAM, HINDI, TAMIL

DECLARATION :
I pledge and pronounce that all the above information is true to the best of my knowledge

[sachunitw]

RESUME
Sachin Shankarrao Thorat
E-mail Id :- sachinthorat_1987 AT yahoo.com .
sachu.nitw AT gmail.com

CAREER OBJECTIVE :
To secure a position of Technical Expertise by hard work, dedication and the ability to acquire new skills will advantage any organization I work for. Committed to continual learning and professionalism; highly organized.

SUBJECT OF INTEREST :
Design and development using CAD and CAE tools like Pro-E, Catia , ANSYS & Fluent , In the domain like Automotive Engineering, I.C. Engines, Material Handling Equipment .

INDUSTRIAL TRAINING & ACADMIC PROJECT WORK :
Trainee Details :
Organization :- Kavitsu Transmission Pvt Ltd,Satara.
Topic :- Vocational trainee.
Duration :- June 27,2006 to July 10,2006.

Organization :- Spicer India Ltd,Satara.
Topic :- Vocational trainee.
Duration :- 5 May to 5 July ,2009.
Project :- Value Stream Mapping year 2009.

Project Details :-
B.E.
Organization :- Sanjyog equipments Pvt Ltd.
Topic :- Design & mfg of Concrete mixture.(higher capacity)
Duration :- 2007-08.
M-Tech
Topic :-Aerodynamics improvement of Man Force intercity bus model. (Using Turbulence modeling)
Duration :- 2009-10.

EDUCATIONAL BACKGROUND :
Masters :- M-Tech in ‘Automobile Engineering’ from National Institute Of Technology-Warangal (NITW) with 8.62 CGPA
Bachelor :- B.E. Mechanical Engineering( year of passing 2008 ) with Distinction (71.75%) from Shivaji University

Exam Institute Board / University Year Of Passing %Marks Class Or Division :
HSC (XII) Y.C.College,Satara Maharashtra 2004 66.53% First class
SSC (X) A.K.V.High School Satara Maharashtra 2002 69.73% First class

PROJECTS UNDERTAKEN :
- Aerodynamics improvement of Man Force intercity bus model. (Using Turbulence modeling) by using ANSYS FLUENT
- Analysis of Combustion characteristics of I.C. Engine by ANSYS CFX.
- Cooled flow analysis of I.C. Engine by using ANSYS FLUENT.
- Design & Development of economical Car HVAC system by using ANSYS FLUENT.
- Analysis of fuel cell by using ANSYS CFX.
- Large Eddy Analysis over Ahmed Body by using fluent.
- Seminar on Hybrid Cars :- This seminar elaborates on concept of Hybrid cars, Its efficiency, performance check, commercial applicability.

EXTRA CURRICULAR ACTIVITIES :
- GATE SCORE of 92.5% in the exam conducted at Feb 20087with All India Rank 1350.
- Certificate for “ Advance Technology in Automobile “Workshop in Nit Warangal

Technical Skills :
Sr. No. Software Institute Duration :
1 C Programming Akshay Computer Services, Satara June 2005
2 Auto CAD Technobuzz Computer Institute & Services, Satara Jan 2006
3 CAD Software Catia V5,Pro-E wilfire3 National Institute Of Technology May 2008 to Aug 2008
4 ANSIS 11 National Institute Of Technology Jan 2009 to March 2009
5 CFD Software Ansys Fluent,Ansys CFX ICEM-CFD,Gambit, Star-CD -introduction Center of Computational Technology Pune (Diploma in CFD) Jan 2010 to March 2010 3 months

Personal Details :-
Date Of Birth :- 1st Nov 1986
Gender :- Male
Marital Status :- Unmarried
Hobbies : Trekking, Cycling, Playing & Watching Cricket, Listening good music,Playing Guitar
Languages Known :- Marathi, Hindi, English.

Place : - Satara
THORAT SACHIN SHANKARAO.

[lohith shetty]

LOHITH SHETTY.K

CAREER OBJECTIVE :
Aim to be associated with progressive organization that gives me scope to apply my knowledge and skills along with my hard work and patience and to be involved as a part of team that dynamically works towards the growth of the organization.

WORK EXPERIENCE :
Company 1 :
Organization : M/s. OTIS Elevator Company Ltd.
Place : Bangalore
From : May 7th 2010 To- Till Date
Department : Research and development
Designation : Cad designer & Draftsman
Company Profile : M/s OTIS is a world leader in Elevator and escalator Industry
Nature of Work :
- Designing parts of elevators using Pro-E for modeling and AutoCAD for drafting.
- Designing and developing the mechanical components like panel, tension device, sheave assm’y, cab, counter weight frame and different components of the elevator system.
- Uploading drawing and files to data base, (WIND CHILL), (PEGAUSIS).
- Preparing word document of design & creating B.O.M in excel.

Company 2 :
Organization : M/s. CADD CENTRE
Place : Bangalore
From : August 2009 To- May-2010.
Department : Training and Outsourcing.
Designation : Draftsman 2d,3d
Company Profile : Worlds Largest Training and Out Sourcing Centre,
Nature of Work :
- Modeling Drawings in Catia
- Drafting Using Auto Cad 2008.
- Uploading drawing.

Company 3 :
Organization : M/s. G.I.S Ltd.
Place : Bangalore
From : Jan 9th 2009 to-August- 2009.
Designation : Draftsman
Nature of Work : - Drafting maps for route track identification for Tata

PROJECT DETAILS :
Company project : - (1) _
Title : “Gen2® ELEVATOR”
Venue : Otis Elevator Pvt Ltd.
Role : Designing and Drafting. Using Pro-E wild fire 0.4 & Auto Cad
Description : Otis has created a smart, compact system that defines the next.
Generation in elegant design and efficient operation.
Gen2® is a machine room less elevator with capability up to 15p and has a speed of 2m/s, the ropes is replaced with belts which reduces the cost efficiency and better life of the elevators.
BENIFTS : Flexible space-saving configuration, Rapid installation, Environment-friendly Smooth, quiet performance, proven reliability.

Company project : - (2) _
Title : “I Genesis ELEVATOR”
Venue : Otis Elevator Pvt Ltd.
Role : Designing and Drafting. Using Pro-E wild fire 0.4 & Auto Cad
Description : “I Genesis” is a mini mc/n room elevator, with low cost than the Gen2® elevator, sheet metal rails r used instead of CI rails. Frame less cab is designed to make it more compact and less weight, designed for 5p and 6p capacity.
BENIFTS : low cost, rapid installation, Smooth & quiet performance, proven reliability.

College project :-
Title : “DEATH WEIGHT PRESSURE GUAGE”
Venue : S.J.E.S Polytechnic Bangalore.
Role : Designing and Drafting. Using Catia, AutoCAD.
Description : This is a device used to determine the pressure of diffLiquid and oil under diff load and temp.

EDUCATIONAL PROFILE :
Diploma in Mechanical engg from S.J.E.S Polytechnic Bangalore with 73 %( 2009).
1 PUC from Stacey memorial Mangalore with 59 %(2006)
SSLC Matriculation from E.S.H.S Bangalore with59.8% (2004).
Professional in Cad from CADD CENTRE Bangalore 2009.
Applied for AMIE.

COMPUTER & SYSTEMS PROFICIENCY :
Design Tool : Auto Cad 2002 and any higher version
Pro-E wild fire 0.2, 0.4. (Part, assembly, drafting,
Sheet metal advance pro-e config).
Catia V5 R15. (Part, assembly, sheetmetal, drafting).
IT Skill : Microsoft Word, Microsoft Excel, Microsoft PowerPoint.
Operating system windows 2000 & XP, 2007.vista...

[Guest]

SUHAS.D.K
Email :- Suhasdks AT GMAIL.com

Job Objective :
- A Challenging position in a reputed organization, which can utilize my skills and knowledge to Maximum extent and offer me a considerable growth.

Strengths :
- Team Player, Adaptive learner & Effective Communicator.
- Hard Working, Committed, Target Conscious & Self-motivator.

Training details :
Organization : Government tool room & training center Mysore
Designation : trainee (conventional machines, Cnc operating &programming)
Duration : (June 2007 to may2010)
Job Description :
1. CNC operating on Fanuc, sunumaric & Heidenhain
2. Cnc programming by using master cam 9
3. Modeling using solid works.

In plant training details :
Organization : Larsen & toubro limited
Coimbatore
Designation : Company in plant trainee
Duration : (June2010 to June2011)
Training Description :
1. Cnc programming by using master cam & UG NX6
2 .Drafting views to model using UG NX6.

TRAINING : Software’s Know
- AUTO CAD 2007
- UG NX6.0(Modeling & manufacturing)S
- Solid Works 2008
Additional training : Software’s
- Uni Graphics Nx6.0 (8 mounts)

[Unregistered]

CURRICULUM VITAE
PRIYANKA CS
Email :cspriyanka.priya37 AT gmail.com

CAREER OBJECTIVE :
Seeking a position to utilize my skills and abilities in the Industry that offers professional growth while being resourceful, innovative and flexible.

ACADEMIC PROFILE :
Bachelor of Engineering (B.E.) in MEHANICAL ENGINEERING from GOVERNMENT ENGINEERING COLLEGE, HASSAN affiliated to VTU with an aggregate of 73.69% in 2013
Semester I II III IV V VI VII VIII
Percentage 70% 70.45% 67.22% 76.88% 68.66% 75.77% 80.22% 79.3%
Examination passed Board / University Name of School/ College Year of passing Percentage :
P.U.C Karnataka Pre-University Board JSS Women’s college, Mysore 2009 71.66%
S.S.L.C Karnataka Secondary Education Examination Board SES Girls high-school, Belur 2007 87.52%

TECHNICAL SKILLS :
** Proe/creo, Autocad, GD & T, Nastran pursued at Cadd center Mangalore.
** Catia V5 pursued at Hora Technologies Bangalore.
** Ansys, Hypermesh, Solid Edge, UG NX, MS Office.

ACADEMIC PROJECT :
TITLE : HEAT TRANSFER ANALYSIS OF TWO WHEELER SINGLE CYLINDER IC ENGINE BLOCK
Status : This work was presented in international conference at AMMMT-2013, SIT Tumkur
Description : In the globalized competitive market, automobile industries are under pressure to produce engine having low weight, better heat dissipation and more fuel efficient. For this, the material used for manufacturing engine components plays a vital role. In this work an attempt has been made to analyze the single cylinder IC engine block made of aluminium alloy and magnesium. The boundary conditions are applied to the inside cylinder and outside surface of the fins. The convective heat transfer co-efficient is applied for the cylinder made up of cast iron and engine block made up of existed aluminum 2024T6 alloy and Magnesium AM-SC1.. The obtained results for both materials are compared. From the results it is observed that Magnesium AM-SC1 alloy has better heat dissipation compared to aluminum 2024T6 alloy. As Magnesium AM-SC1 have lighter weight and can be used in high temperature conditions, it can be used as alternative material for engine cylinder block.
CAD tools used : CATIA V5, Preprocessor-HyperMesh, Solver- ANSYS

ACTIVITIES AND INTERESTS :
** Listening to music, Playing Cricket
** Travelling

HALLMARKS :
** Self-motivated, ability to grasp quickly
** Willingness to learn new things.
** Good communication and verbal skills
** Team Worker

PERSONAL INFORMATION :
Date of Birth : 26/06/1991
Father’s Name : SHANKAR CK
Permanent address : Chinenahalli, chikmedur (P) Belur (t), Hassan (D)-573115
Nationality : Indian
Languages known : English, Kannada, Hindi

DECLARATION :
I hereby declare that all particulars are true and correct to the best of my knowledge and belief.
(PRIYANKA CS)

[Unregistered]

Curriculum Vitae
Sareeka Somanath Bagad
Email : bagadsarika AT gmail.com

PERSONAL STATEMENT : A Mechanical Engineering graduate from Indian renowned University seeking career in Automotive Transmission design and development. I wish to apply my academic knowledge with acquired Automotive domain and creo skill for world class product development

EDUCATIONAL QUALIFICATIONS :
Examination Board/University Year of Passing % :
B.E. (Mechanical Engg.) Pune University 2012 61.33
12th Maharashtra State Board 2008 81.33
10th Maharashtra State Board 2006 78.4

TECHNICAL BACKGROUND / TRAININGS / KEY SKILLS / CERTIFICATES :
Training E1- Beginner, E2 – Intermediate , E3 - Expert ,E4 – Master User
Domain Training Automotive Power Transmission (Manual and Automatic Gear box design, Load calculations for Gears and Axle design, Clutch design calculation) 25 Hrs E2
Tools Training Creo Elements Pro 5.0 – Basic Design(PTC certified Student ref No : PTC211-0010 ) 100 Hrs. E3
Othe Tools GD&T 10 Hrs. E3
SIX SIGMA-DMAIC 40 Hrs. E2
PDM/PLM PLM/PDM ( Windchill) 05 Hrs. E2
Productivity Tools MS Office 2007, 2010,MS EXCEL,MS WORD 15 Hrs. E3

ACADEMIC PROJECTS :
B.E. Project Title : To analyse and design turbo ventilator

Objective : To study turbine ventilator and try to design it at various bend angle to increase its efficiency

Scope : Turbine ventilator is used in every company to reduce heat effect and increase cooling effect in company. It is economical and eco friendly. It saves lot of electricity.
Brief Procedure : First Analyse turbo ventilator manually. After it we draw it on CATIA using clay modelling .And after that we studied it on CFD.
Tools Used : CFD, CATIA
Benefits to the company :It saves lots of electricity as it does not require any electricity. It is economical as well as eco-friendly.

LIVE PROJECT AND WORK EXPERIENCE :
Company (3rd jun2012 - to Till date)
Company Name : Bhor engineering pvt ltd
Designation :-Development and Design engineer
Profile snap shots : New product development, Product development knowledge,
Designing of new products on Creo,Autocad.Know all documents related to development of new product like PPAP,CAPA. Knowledge of Poka yoke, Kaizen,Six Sigma,7qc tools

1)Project name : Skid
Objective : To design skid in creo so that its fixture can be done easily and also manufacture easily.
Scope & Procedure : Skid is a base of gensets of cummins.Skid is made of mild steel. It is around 50 kg so to reduce material wastage first we draw it on creo. Follwing cutting of square tubes, welding ,powder coating.
Benefits to company :Reduce material wastage,Save time

2) Project name :Exhaust pipe
Objective : To design Exhaust pipe in creo so that its fixture process can be made easy by knowing all necessary dimension
Scope and Procedure : Exhaust pie has to be made in cut section so,it has 3 cut section.It is of Stainless Steel so to reduce its wastage we draw it on creo.By drawing we come to know its cutting angle, distances etc.Thean we made fixture follwing cutting on cutter,welding,powder coating
Benefits to company :Reduce material wastage,Save time

LIVE PROJECT AND WORK EXPERIENCE :
Company name
(IKSC Bridge Stone Pvt Ltd) Spur Gear Design.

EXTRA-CURRICULAR ACTIVITIES, AWARDS AND MEMBERSHIPS :
Got 1st prize in Robo Race Competition. Active member of Zion tech fest. Organised Paper presentation competition in my college. Member of NSS camp.

HOBBIES & INTEREST : Singing ,Reading

DISC & 7 WORKPLACE DRIVER EVALUATION :
** Aesthetic - Driver-Creative thinker and Active Problem solver.
** Economic –Responsive towards work related activities.
** Individualistic-Ability to take stand in bringing new ideas.
** Political- Good team player.
** Regulatory-Focus on projects and accurate work.
** Theoretical- Strong desire to learn new things and knowledge driven. (detailed report of above can be presented if desired)

PERSONAL DETAILS :
Name :Sareeka Somanath Bagad
Date of Birth : 11/04/1991
Nationality : Indian
Languages Known : English, Hindi, and Marathi

Place : Pune
Date :