www.mrftyres.com MRF Ltd Jalandhar, Kanpur : Automobiles Product Testing Supervisor

[mskavi]

MRF LIMITED Jalandhar, Kanpur : Supervisors - Product Testing
Website: http://www.mrftyres.com

Designation: Supervisors - Product Testing
Experience: 3 - 5 Years
Location: Jalandhar, Kanpur

Job Description:
The job involves fitment and periodic monitoring of the project tyres, co-ordination with the customers on the test requirements, field surveys on tyre performance, data analysis and feedback to R&D Department etc...

Desired Candidate Profile:
Candidates should be ex-servicemen with a diploma in Mechanical Engineering in the age group of 35-45. Preferenece will be given to the candiates who have basic knowledge of automobiles and computer. The incumbents are required to travell extensively.

Company Profile:
MRF TYRES is your ultimate destination to experience the ethos, image and brand identity of a company that manufactures the largest range of tyres in India and exports to over 65 countries world-wide

Email Address: balaji.subramaniam@mrfmail.com

Keywords: Automobiles, service engineers

[Guest]

I am an ex serviceman, I have completed 17 years of service in Indian Navy as Petty Officer ENGINEERING MECHANIC. I have extensive knowledge and exposure of the mechanical aspects of various engineering equipments and systems which i have gained during service in various establishments and operational units of Indian Navy. I have been exposed to leadership and managerial traits of personnel and resource management which i have augmented over the years due to my genuine and active participation in the assigned duties and responsibilities. My resource planning and laisioning skills in the work department of Naval Ship Repair Yard (Port Blair) were highly appreciated because of which I was retained In repair yard for four years. I have one year diploma in software management(DISM) from APTECH, Certificate in personnel management and Industrial Relation. In addition to this I have diploma in sub - fire and assistant security officer. I have wide and indepth understanding of various fire fighting and damage control equipments and systems which I have put into practice in various operatonal units of Indian Navy. Besides this I have a good typing speed of 50 to 60 words per . I am searching an office related and security related job in Kanpur or Lucknow owing to settlement commitments.

[Guest-IJT]

CURRICULUM VITAE

DINESH BHARDWAJ
Email ID : -dineshdino87 AT yahoo.in
09463061020

OBJECTIVE
To contribute the organization, which has the growth, prospectus and which will be able to effectively use my skills and experience and provide me with opportunities for the upward movement along with providing a healthy atmosphere.

EXPERIENCE IN INDUSTRY

ONE YEAR experience in Tool Room of STANDARD SWITCH GEAR LTD. JALANDHAR Worked on Press tool & Die making and repairing.

Two year experience as a supervisor in a BRIJ AUTO INDESTRI .this company made hydraulic jack, container lock etc.

EDUCATION :

Year Degree/Certificate Institute/ Board/University Percentage/CGPA*
Aug2005
To
July2008 Diploma in Mechanical Engineering Lovely Institute of Technology, Jalandhar city 62
Aug2002
To
July2005 3 Year Course in TOOL & DIE MAKER Central Institute of hand Tool MSME( Govt. of India) Jalandhar City 76
March
2004 12th P.S.E.B 50
March
2002 10th P.S.E.B 55

SHORT TERM COURSES

1. CTIA :-From CADD CENTER
COURSE CONTENTS : -1.Sketch. 2.Part-Solid, Sheet metal 3.Assembly 4.Manufacturing- Mold Cavity, Cast Cavity 5.Drawing
2. Pro-E 2.0 CAD, work NC CAM (MSME TOOL ROOM, Govt. Of India)
COURSE CONTENTS : -1.Sketch. 2.Part-Solid, Sheet metal 3.Assembly 4.Manufacturing- Mold Cavity, Cast Cavity 5.Drawing.

3. AutoCAD 2004 & 06 (UNDP PROJECT, Govt. Of India)
COURSE CONTENTS : -Creating/Opening/Editing/Printing & Saving a file, 2 D&3 D Drafting, Dimensioning/Text/Tolerance, Simple 3D Modeling &Editing.
4. CNC Milling (MSME TOOL ROOM, Govt. Of India)
COURSE CONTENTS : - On job Training on CNC Milling Machine following operation.
Milling, Drilling, Tapping, Boring, Counter boring, 3D milling & Manual programming.
5. Chemical Analysis (NITCON, Govt. Of India)

All From : CENTERAL INSTITUTE OF HAND TOOL (GOVT. OF INDIA)

TRAINING

1. Krishna Engineering works limited Jalandhar
2. Victor Forgings Jalandhar
3. Royal Engg. Work Phagwara

PROJECTS

1. PLASTIC INJECTION MOULD (cap of bottle)
2. JIG & FIXTUR (Bike Handle)
On a Lath, Milling & E.D.M machine. Under the valuable guidance Er. Ankur.During DIPLOMA COURSE.

[Guest]

EX – NB SUB (DRAUGHTSMAN TECHNICAL) SURESH KUMAR
E-mail :sureshkumar9935 AT rediffmail.com

------------------------------------------------------------------------------------------------------------
CAREER OBJECTIVES :- To work in an organization where my technical skills, leadership qualities and experience can be optimally utilized for a growth oriented company in Office Management/Banking Sector/Administrative Department and HR management
KEY PERFORMANCE AREAS
Monitoring of Security Aspects (Technical/Physical Security)
Computer Literate
Store Keeping of Technical/General Stores
Event Management
CAREER HIGHLIGHTS
Junior Commissioned Officer (JCO) in the Indian Army (Corps of Signals)
JCO In-charge Section
Event Management such as Conference, Seminars, Liaison with Govt. Department
JOB EXPERIENCE
28 years experience as Technician in Tele Communication in Corps of Signals.
WORK EXPERIENCE
Technical Draughtsman
Monitoring of Security Aspects (Technical/Physical Security)
Computer Literate
Store Keeping of Technical/General Stores
-2-
EDUCATION QUALIFICATION
Matric
STRENGTHS
An enthusiastic, friendly, self motivated, open minded, energetic and a good team leader, believe in carrying the team members together, willing to do the given task effectively.
Consider myself suitable for any type of responsibility in the field of Technical Management, Technical Instructor, Human Resource Management, General Administrative Task, Store Holding which demands honesty, sincerity, commitment and challenges.

[Guest]

CURRICULUM VITAE
ASHISH PATERIA
Email Id : - ashish_mech2006 AT yahoo.com
______________________________________________________________________________________
Career Objective :-
To work on a creative and challenging position which will help me to explore myself fully and to play a vital role in bringing success to an organization.
Work Experience : - Worked in Suprav Infrastructure Pvt. Ltd(Deals in RCC pipes and other concrete products) Bijoli Jhansi (U.P.) from 4th October 2010 to 5th march 2011.
Role : - Involved in sales of Suprav products and engineering aspects.
Educational credentials :-
Passed BE (Mechanical) with (Hons.) and 77.1% aggregate from SRITS,Datia(M.P.) RGTU,Bhopal in 2010.
Passed Intermediate with 58.8% from CKC,Jhansi(U.P.) ISC,Board in 2005.
Passed High school with 69.3% from CKC,Jhansi(U.P.) ICSE,Board in 2003.
Computer Proficiency :-
- Knowledge of MS Office, Auto CAD, Pro-E
- Operating System : - Window 98, 2000, XP
Industrial Training :-
- In Bhilai Steel Plant,Bhilai(Chattisgarh) for 3 weeks .
- In Wagon Repair Railway Workshop, Jhansi (U.P.) for 2 weeks.
Extracurricular Accolades :-
- Winner in various competitions.
- Actively participated in various sports held at institute.

[Guest]

Resume
AMAR SINGH PAL (Ex-Army)
E-mail : amarsinghpal AT live.com
I have 31 years of experience in Technical Stores Management and Finance Management of Stores. I am currently working with ‘Jaiprakash Power Ventures Limited’.
Profile
- Industry :
1. Construction / Cement / Metals
- Functional Area :
1. Stores
2. Finance
- Specialization :
1. Stores Management Technical
2. Planning and provisioning (Including – Purchase)
3. Preservations of Stores
4. Accounting of Stores.
5. Data Entry
Current Job Profile :
- Employer : Jaypee Bina Thermal Power Plant
(A Division of Jaiprakash Power Ventures Limited)
- Designation : Assistant Manager Stores
- Employed Since : Sep 2010
Past Job Profile :
- Employer : Indian Army
- Rank : JCO – Subedar
- Trade : Store Keeper Technical
- Corps : Electronics & Mechanical Engineering
- Date of Enroll/Ret : 10 May 1980/31 May 2010
Others :
- Date of Birth : 03 Oct 1961
- Medical Category : SHAPE – 1
- Education Qualification :
- Military :
I. Graduation Electrical & Mechanical (Class - I)
II. Automated Data processing (Computer)
III. Security of stores
- Civil :
I. Intermediate (Science)

[Guest]

i need a job because i am a fresher.