SUNGCHANG, KOREA Qatar, Saudi Arabia : QA/QC PIPING ENGINEER / INSPECTOR / SUPERVISPOR

[Admin]

M/S. SUNGCHANG, KOREA Qatar, Saudi Arabia : QA/QC PIPING ENGINEER / INSPECTOR / SUPERVISPOR

Keywords: QA / QC PIPING ENGINEER / INSPECTOR / SUPERVISOR

Designation: QA/QC PIPING ENGINEER / INSPECTOR / SUPERVISPOR
Experience: 5 - 10 Years
Location: Qatar, Saudi Arabia
Compensation:
Salaru USD 1300-1500 for Engineers / USD 1000-1200 for Inspectors / USD 800-900 for Supervisors + free food, single status accommodation, medical & transportation.
Education:
UG - B.Tech/B.E. - Mechanical,Diploma - Mechanical
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Production, Maintenance, Quality
Posted Date: 31 Jul 2009

Job Description:

QA/QC Engineer / inspectors/ supervisor having experienced in Piping preferably in Piping ISO drawings,Fit up, weld visual, monitor weld parameters/interpret WPS, Line walk, Hydrostatic test,welding etc at Oil & Gas, Petrochem projects.

Desired Candidate Profile:

B.E / Diplima (Mech) with min 5 years exp as QA/QC Piping preferably in the Oil & Gas, Petrochem Projects. Overseas exp preferred.

Company Profile:
A leading Construction Co. The present vacancy is for their projects in Qatar and Saudi Arabia.

Executive Name: Venkat

Address:
Dynamic Staffing Services Pvt Ltd
E-40/7 Okhla Industrial Area Phase ? II
NEW DELHI,Delhi,India 110020

Email Address: dss-job7@dss-hr.com

Telephone: 91-9910299647

Keywords: QA / QC PIPING ENGINEER / INSPECTOR / SUPERVISOR

[Guest]

am fazil from kerala.india,i am btech in mechanical engineering.have 3years exp in quality control

[tanweeralam]

i am pipe enggr,i have 2yrs exps,any vacancy for that field

[Guest]

daer sir
I am Md.Nafisul Haque Diploma Engg. in Mechanical.I have seven and half years of experiance in which two years in piping as a construction field engineer in MS.AL-SUWAIDI TRADING & DEVELOPMENT CO. SAUDI ARABIA. I have worked in POWER PLANT FOR WATER TREATMENT. I want to work in this organisation.
Hoping for your kind consideration.


THANKS & REGARDS
Nafis

[Guest]

Respected Sir,
My name is Avinash from Kerala,India..I am completed diploma in Mechanical Engineering In March 2010...I am fresher...I need a job in your company..
Yours Faithfully
Avinash.K

[Guest]

IM AMOL PLS CONSIDER MY RESUME

[HARIS Hmsa]

BIODATA

HARIS.H
Email : harriskhan24 AT yahoo.com
OBJECTIVE
Seeking a challenging and rewarding career, where I can make a significant contribution to the organization using the skills that I have acquired.
PROFESSIONAL EXPERIENCE
April,2010-
. Worked with STEEL MAX Rolling Mill as a plant supervisor. During this period I gained Substantial Work Knowledge in the activities of production and Quality control&Mechanical maintanace.My job include Site Visting and Site Cordination.
Visual Inspection and reporting to Technical office.
Controlling of various processes with approved documents
Quality control ,Maintenance and inspection.
Plant Section and accessories production planning and preparing relative files and records
Jun,2009-march,2010
Worked with Diploma Technical Assistant (Contract)at Composite Characterisation and Testing Division, VSSC/ISRO. Gained working hands on
Testing of Composite Materials using UTM (Universal Testing Machine), NDT(Non Distrective Test)&Mechanichal maintanance Lab .
Jun, 2008 – Jun, 2009
Worked with Diploma Technician Apprentice at Composite Characterisation and Testing Division, VSSC/ISRO. Gained working hands on
Testing of Composite Materials using UTM (Universal Testing Machine), NDT(Non Distrective Test)&Mechanichal maintanance Lab .
Preparation of Mechanical Drawings.
Site Visiting and Site Coordination.
Visual Inspection and reporting to Technical office.
Controlling of various processes with approved documents
Characterisation of composite materials like solarpanel,yoke etc.
Non Destructive testing conducting after processing of Composite materials.
Pressure testing of Gas bottles used as fuel storage tank in satellite launch vehicles.
Design of fixtures for carrying out different tests and prepation of relative files.
Besides the tests, supervision of the team members and taking care of employees welfare was also an integral part of my job.
May, 2007 - Apr, 2008
Worked with STEEL MAX Rolling Mill as a plant supervisor. During this period I gained Substantial Work Knowledge in the activities of production and Quality control&Mechanical maintanace.My job include Site Visting and Site Cordination.
Visual Inspection and reporting to Technical office.
Controlling of various processes with approved documents
Quality control ,Maintenance and inspection.
Plant Section and accessories production planning and preparing relative files and records
EDUCATIONAL QUALIFICATIONS
2007 Diploma in Mechanical Engineering, Sreenarayana Guru Polytechnic, Coimbatore, Tamilnadu with First Class
2001 SSLC, CBKM School, Puduppariyaram, Palakkad, Kerala
SOFTWARE EXPOSURE
MSOffice, AutoCAD2010&solid Works.
ADDITIONAL TECHNICAL QUALIFICATION
ASNT Level 2
HOBBIES
Traveling, photography & driving

[Guest]

R E S U M E
NAME : Arlan B. Quinit
EMAIL ADDRESS : quinitprog AT yahoo.com
OBJECTIVES
Looking for a post where my qualification and experience, knowledge, skills, and creativity can be utilized for the benefit of the company & can be applied for organizational benefit and to work with a team of goal-oriented individuals.
TRAINING, SEMINAR & WORKSHOP ATTENDED :
TITTLE DATE CONDUCTED IN
Excavation & Shoring JER G.I 6.010 Nov. 14, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Lock-out/tag-out JER G.I 6.012 Nov. 14, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Confined Space JER G.I 6.009 Oct. 31, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Pressure Testing JER G.I 2.102 Oct. 10, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Supervisors Responsibilities March 19, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Scaffolding & Tagging Course July 20, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
Fire Warden Training Program Feb. 28, 2011 TCF Training Room Daelim Saudi Arabia Ltd.
OSHA in Construction Safety & Health (30Hours), Nov. 4-18, 2011 Jubail KSA.
First Aid CPR Course May 29, 2011 Jubail Medical Center, KSA
Management Safety Responsibilities Sept. 30, 2011 Dharan Palace Hotel KSA
Safety Meetings & Training Programs Sept. 30, 2011 Dharan Palace Hotel KSA
Basic Occupational Safety & Health (BOSH 40Hrs.) June 10, 2011 Dharan Palace Hotel KSA
Fall Protection Aug. 26, 2011 Dharan Palace Hotel KSA
Excavation & Trenching Safety Aug. 26, 2011 Dharan Palace Hotel KSA
Severe Weather Planning June 24, 2011 Dharan Palace Hotel KSA
Mobile Elevating Work Platform Safety June 24, 2011 Dharan Palace Hotel KSA
Accident Investigation Training Program May 27, 2011 Dharan Palace Hotel KSA
Construction Safety Inspection Procedure & Checklist May 27, 2011 Dharan Palace Hotel KSA
Fleet Motor Vehicle Safety Program Apr. 29, 2011 Dharan Palace Hotel KSA
Hand Protection from Chemical Exposure Apr. 29, 2011 Dharan Palace Hotel KSA
Root Cause Analysis Incident Investigation June 25, 2010 Dharan Palace Hotel KSA
Concrete Masonry & Construction Safety June 25, 2010 Dharan Palace Hotel KSA
Emergency Preparedness Plan May 28, 2010 Dharan Palace Hotel KSA
Hearing Conservation May 28, 2010 Dharan Palace Hotel KSA
Overview on OSHA 500 Apr. 30, 2011 Dharan Palace Hotel KSA
Hydrogen Sulfide Apr. 30, 2010 Dharan Palace Hotel KSA
Biological Effect of Radiation March 26, 2010 Dharan Palace Hotel KSA
Industrial hygiene March 26, 2010 Dharan Palace Hotel KSA
Basic Health & Safety (FAHSS / TUV) Aug. 12, 2009 Raymond Saudi Arabia Ltd.
Fire Fighting Protection & First Aider 2001 Iligan City Fire. Dept. / Volunteer
WORK EXPERIENCE
1)
COMPANY :Daelim Saudi Arabia
Project :Acid Gas Treatment Plant, Jubail Export Refinery Project Package 2B
Client :Saudi Aramco Total Refining & Petrochemical Co. (SATORP)
POSITION : WORK PERMIT & EQUIPMENT COORDINATOR/SUPERVISOR
INCLUSIVE DATE : February 12, 2011 to Present
2)
June 04, 2008 to June 28, 2010
PROJECT : Eastern Province Water Transmission System Project Phase II
LOCATION : Jubail
POSITION : SAFETY OFFICER
PROJECT : Hail Village Water Supply Project For Internal Cement Mortar Lining
LOCATION : Raymond Factory Jubail
POSITION : SAFETY OFFICER
PROJECT : Heat Shrink Sleeve Installation for Straight Pipe.
LOCATION : Yuksel Insaat Saudi Co. Ltd. (Jeddah)
POSITION : SAFETY OFFICER

PROJECT : Saudi Aramco, MOWE, SWCC Yard Project for Internal Cement Mortar Lining.
LOCATION : Raymond Factory Jubail
POSITION : SAFETY OFFICER
DUTIES AND RESPONSIBILITIES :
- Promote occupational health & safety within the work area and develop safer & healthier ways of working & Monitor the attitude and behavior of the people to educate regarding safety awareness and to follow the company safety policy.
- Make sure that personal protective equipment, such as dust masks, safety glasses, footwear & helmets being used in work places.
- Work Permit & Equipment Coordinator, including HSE Document Control.
- Check and review the document / attachment of equipment inspection.
- Monitoring of Equipment Inspection sticker.
- Check and verify that the safety requirements are meet as per the site Work Permit requirement/procedure.
- Perform Color coding and record keeping.
- Monitoring of Safety Observation Report.
- Communicate frequently with management to report on the status of the daily safety Observation reports.
- Weekly and Monthly Safety Observation presentation report.
- Attending Safety Weekly Walk thru inspection and involve in corrective actions.
- Safety Audit (Documentation preparation).
- Weekly & Monthly report preparation (PSI).
- Conduct weekly Safety meeting concerning safety activities and collect rectification action or improvement for their each Observation.
- Coordinate emergency procedures, rescues, fire fighting and first aid crew.
ORGANIZATION AFFILIATION :
- Philippine Society of Safety Practitioners(PSSP-MER),Middle East Chapter
EDUCATIONAL ATTAINMENT

COURSE : Computer Programming
SCHOOL : Iligan Computer Institute Iligan City, Philippines
GRADUATE : March 2002
COMPUTER LITERATE
Knowledge in Microsoft Words
Knowledge in Microsoft Excel
Knowledge in Power Point

[Guest]

S NARESH KUMAR
E-Mail : snareshkumar30 AT yahoo.com
Seeking assignments in QA /QC with a growth oriented organisation
PROFESSIONAL ABRIDGEMENT
- 6 years of experience in Quality department.
- Hands on experience in inspection of welding, evaluating the radiography films and submitting
the weekly report to the client.
- Proficiency in inspection of Pipings,Drums,Tanks,Water wall panels,etc.,
EDUCATION
- B.E. (Mechanical Engineering) from Anna University in 2001-2005. (Secured First Class)
PROFESSIONAL CERTIFICATION
- Certified welding inspector CSWIP 3.1, From The Welding Institute (TWI) Certification Ltd,
Certificate no. :59755
- Certified welding inspector (AWS-CWI), From American Welding Society.
Certificate no. :09094641
- ASNT LEVEL-II IN NDT :
- Visual test (VT)
- Radiography Film Interpretation (RTFI)
- Penetrant test (PT)
- Magnetic particle test (MT)
- Radiography test (RT)
- Ultrasonic test (UT)
CORE COMPETENCIES
Worked as a QA/QC personnel involved in the fabrication inspection of various types of boilers like
- EPC Contractors for Thermal Power Plants,
- Manufactures of AFBC & CFBC Type Boilers,
- Waste Heat Recovery Boilers,
- Pressure Vessels &
- Other Boiler Components
For various Captive Power Plants, Cement, Textiles and various process industries under third party Inspection agencies like Lloyds, & IBR as per ASME & IBR Codes and Standards.
- Experience in inspection of Piping & Pressure vessels.
CAREER CONTOUR
Aug ’10 to Aug’11 with REZAYAT-NCC, Kingdom of Saudi Arabia,
As QA/QC engineer
- Attending to inspections and tests, according to the approved ITP, verifying the inspection reports
and validating the results.
- Ensuring adequate support to the QM/PM in the relationships with Contractor/Client and /or third parties for quality topic.
- Recording and managing systematically the non conformity reports issued on site, checking that the settlement of non conformities is in compliance with the acceptability criteria and the schedule is in accordance with the site requirements.
- Line checking and clearing the punch list items for hydro/pneumatic test.
- Responsible for calibration / re-calibration of Monitoring and Measuring Devices.
- Maintaining the inspection and test status.
- To prepare Welding Procedure Specification (WPS) as per the relevant standards.
- To witness the Procedure Qualification Record (PQR.)
- Responsible for welder qualification.
- Monitor the welding activities as per the project specification.
- To follow up the NDE and Heat Treatment activities as per the project specification.
- Review the NDT reports.
- To perform the weld visual inspection and prepare the records.
- Daily surveillance of daily welding and welding consumables.
Key Projects Handled :
- Project Name : 2X660MW IPP Project
- Contractor : SEPCO-III Electric Power Construction Corporation.
- Client : Rabigh Electricity Comapny.(RABEC)
- Project Name : National Chevron Phillips.(Petrochemical plant)
- Contractor : Daelim Saudi Arabia Co Ltd.
- Client : Chevron Phillips/Saudi Industrial Investment Group.
Apr’09- Aug’10 with EDAC Engineering Ltd, Chennai, India
As QA/QC engineer
Formerly SPIC JEL Engineering construction Ltd.
- To monitoring the welding activities as per project spec.& procedure.
- Preparation of weldmap, Inspection test plan, Welding procedure specification, Procedure
qualification record, Welder qualification record.
- Review the subcontract daily welding reports.
- Responsible for welder qualification.
- Monitoring welding consumables.
- Visual inspection of weldments to follow up the NDT & related heat treatment as per project spec.
- Prepare the line history sheet to the client for review & got the approval prior to hydro test.
- Field inspections like fitup, final visual of weld joints.
- Co-ordinate with thirdparty inspector & client.
- Responsible for calibration / re-calibration of Monitoring and Measuring Devices.
Key Projects Handled :
- 4 X 300 MW coal-fired power plant in Ratnagiri, Maharashtra. - JSW Energy (Ratnagiri) Limited (“JSWERL”).
Jun’05 – Apr’09 with Cethar Vessels Ltd., Trichy, India
As Engineer – Quality
The Company has been accredited to use Prestigious ASME “U”,“S”, “PP” and “R” stamps.
- To check the material against test certificate & ensure by PMI test.
- Approval of processes (such as First Off Trial) wherever required
- Responsible for carrying out preshipment inspection of all components.
- Identification of products non conformance & raising Non Conformance Report (NCRs).
- Maintenance of quality status of products in the shop/stores through continuous process control and inspection.
- Carrying out inspection and stage clearances of products & raw materials as per quality. plan/documented procedures & release of IR’S (Inspection Reports).
- Offering the products/materials for inspector of boilers and obtaining clearance.
- Responsible for maintaining WPS, PQR and ensure welders are working within the essential variables of appropriate WPS.
- Responsible for coordination with client during inspection.
- Maintaining statutory and customer inspection reports wherever required and history cards.
- Carrying out surveillance and product quality audits on products/process.
- Monitoring welding consumables.
- Conducting hydrostatic testing.

IT SKILLS
- Well versed with MS Office, Windows XP & Internet Applications.

[Guest]

BE with 9 years in QA/QC Engineer,valves and boiler manufacturing field.
ARUMUGAM.M
MAIL ID : sriariarumugam AT gmail.com,Sri_arumugam AT yahoo.co.in

Career Objective :
To work in an organization where I can face challenge, share knowledge, seeking promising career that provides an opportunity to enhance current skills, acquire new skills and contribute constructively to the organisation.
Resume Headline :
B.E in Mechanical Engineer having 8.7 years of Experience till this date in Supervision, Fabrication, Welding Inspection & Quality Control activities in various Boiler components and its accessories. Review & Approval of QAP, ITP, WPS & PQR documents for various projects.
Professional Experience :
M/S Cethar Limited as Quality control SR.Engineer from Nov 2006 to Till Date. (U & S Stamp authorized, ISO 9001 certified concern)
M/S Sri Ranganathar Industries (p) Ltd as Quality control engineer from August 2005 to Nov 2006. (ISO 9001 certified concern) –Valves Manufacturing Company.
M/S GTN Exports LTD as Quality control Trainee Engineer from July 2004- july2005(ISO 9001-2000 certified concern)-Valves and valves component manufacturing company
Valve Names
Swing check valves, stop check valves, wafer check valve and gate valves like wedge gate valve, knife gate valve, globe valves and ball valves.
Current functional Area & Location :
QA / QC – Senior Engineer
M/S Cethar Limited.
No.4, Dindigul road, Trichy – 620 001
Summary of Skills and Experience :
Having 3 years in the Quality control process and assembly inspection for various Valves components..
Having 5.7 years of experience in the Quality Control and Welding Inspection for various components of Boiler manufacturing for chemical, process and power plants
Well versed with the international codes such as ASME, AWS Experience in making WPS and conducting PQR and welder qualification.
Exposure In Welding (QA/QC) :
Experienced with the Stage Inspection of various activity for Boiler components and BOP.

Experienced with the review & approval of Quality Assurance Plan (QAP) / Inspection Test Plan (ITP), Procedures, WPS, PQR & WPQ for various Boiler.
Experienced with the Inspection of various materials like Carbon Molybdenum steels, 1 1/4-Chromium 1/2-Molybdenum steels, 2 1/4-Chromium 1-Molybdenum steels, 18-Chromium 8-Nickel steels and 9-Chromium 1-Molybdenum Vanadium steel and related to boiler plants.
Witness the Welders Simulation / Qualification test with regard to PQR (Procedure Qualification Record) WPQT (Welder Performance Qualification Test) and PWQT (Production Weld Qualification Test) as per the approved specification based on international codes & standards.
Experienced with various welding processes like, SMAW, GTAW, SAW,FCAW & GMAW Joining materials like Carbon Steel, Stainless Steel and Low and High Alloy steels, Review, Maintenance & follow-up of Proposed Welding Procedure Specification and Welding Procedure Specification for similar and dissimilar metals with single or multiple welding processes in accordance with ASME Sec IX, and full inspection.
Fitment inspection of Steam Drums, Water Wall Panels, Economiser, Super Heater, Reheater Coils All types of Headers, Storage tanks, Blow Down tanks, Columns.
Ceiling Girders, Ducting and all types of Structural Items with respect to Visual, Dimensional and Orientation compliance with approved drawings and specifications.
Experienced with the preparation cum maintenance of welder’s performance qualification record and welders performance rating thro’ welders and or welding control log.
Experienced in various Non destructive Examination (NDE) techniques in accordance with ASME Sec V like Liquid-Penetrate Inspection (LPI), Magnetic Particle Inspection (MPI), Radiography Test (RT), Pressure test with water/air as test medium and Indian welding society (IWS).
Experienced with Post Weld Heat Treatment cycles by monitoring the heating rate, soaking temperature & time and cooling rate. Verification of the Charts in conjunction with the relevant specification and or procedure.
Experienced in off loading inspection at our various sub vendors in and out-TamilNadu(Chennai,coimbatore,salem,Dindigul,Ranipet),KA(Hosur,Bangalore), CG(Raipur, Bhilai)MH(wardha,Nagpur),WB(,Durgapure,Howrah) for almost 2.5 years
Repair welding procedure review, follow-up and monitoring of the repair process till the completion of various confirming the material compliance with relevant standard or test certificates.
Jobs involved :
Cethar Limited :
Inspection of various Steam Generator components & Balance of Power Plant components for FBC, AFBC, CFBC ,PC Fired Boilers & Travelling Grate Boilers. The preparation of QC documentation (History card, Inspection release note & ect.) for the same.
Inspect the Welder Performance Qualification test WPQT as per the ASME / AWS
Have well known experience in the field of Off Loading Inspection At our sub vendors- Thuavakudi Industrial Area and Mathur Sidco.Etc-Trichy and other side Trichy.
Inspected Various Types Of components Such As (Column Assy., Beams, Ducting, Fan Casing,ESP Components, Machining Items,Rolling,Shearing,Plasma Cutting, Sand Blasting And Other Surface Preparation methods. And Pressure parts Items
1. Economiser, Super Heater, Reheater Coils.
2. All Types of Headers.
3. Water Wall Panels.
4. Steam Drum.
5. Piping Items.
6. Storage Tanks.(Deaerator,Surge Tanks, Oil Tanks)
7. Blow down Tanks
And All Pressure parts Items.
Co-ordination with clients, third party inspection (TPL, LLOYDS, BVQI, QUEST and SGS) And IBR Inspection.
Conducting the vendor evaluation and prepare report.
Raising the Non – Conformance Report for deviation Product from drawing requirements.
Carried out Galvanizing inspection as per IS.
Educational Qualification :

BE in Mechanical Engineering from Sethu Institute of Technology, Kariapatti-Virudhunagar.
Declaration :

I hereby declare that the above furnished details are true to my best of my knowledge.
Yours Truly,
M.Arumugam

[Guest]

I HAVE APPEARED IN INTERVIEW FOR THE POST OF DOCUMENT CONTROLLER ON 02/12/2012 THROUGH ASIAPOWER OVERSEAS EMPLOYMENT SERVICE NEW DELHI INDIA BUT RESULT IS NOT YET CONFIRMED PLEASE CONFIRM IT. I HAVE BEEN SELECTED BUT INTIMATION FOR MEDICAL /VISA IS STILL AWAITED. IAM WATING FOR YOUR REPLY.

SHAILESH KUMAR MISHRA TOKEN NO. 9317

PASPORT NO. G-6780777