Ship Maritime Technical Support services : Dubai

[ABS-GL]

Hello ;
We are three friend a team,Part time or According to projects (on shipyard) provides a very detailed engineering service design work on different types of ships such as.

if you need marine engineering service please contac mail (please with company name) any contry no problem.
maritimeproject@yahoo.com</SPAN>

We are working very cheap,before do primary working to give for company..if you approved,we are to continuous job.
All projects class approved

According to BV-ABS-RINA-GL-NK-MARPOL-SOLAS maritime regulations.


SCOPE OF MARITIME SERVICES
General Cargo Ships
Containers
Oil and/or Chemical Tankers
Passengers Ships and Ferries
Yachts
Oil Platforms
Supply/tug Vessel
Jackup barge
Cargo Barge
According to Marpol Reg.(last) Single hull Tanker to Double hull tanker to convert Or General Cargo
Modification Projects (on shipyard,technical support)

SOFTWARE FOR GENERAL DESIGN PURPOSES
AutoCAD
TRIBON Creation of the whole design process of ship from the initial design until detailed production drawings
ANSYS Ansys Proffesional product is being used to analyse the vibration characteristics of the ships, structural stress patterns occurred at the global and local part of ships and thermal stress distribution occurred in tank structures because of thermal loads.
MARS Bureau Veritas Modeling and dimensioning the plates and secondary structural elements of the vessel according to BV rules.

SHIP THEORY CALCULATIONS
Calculation of tank capacities, preparation of ullage and sounding tables
Calculation of hold capacities for trimmed and untrimmed ends, calculation heeling moment
Calculation of hydrostatic, stability cross curves and trim table
Inclining experiment executing and preparation of the experiment report
Freeboard calculation
Calculation of trim & stability according to IMO Stability Regulations
Preparation of trim & stability booklet
Calculation of damaged stability
Calculation of required damaged stability for B - reduced freeboard
Calculation of damaged stability for tankers according to IBC Code and MARPOL 73/78 Rules
Calculation of probabilistic stability and determination of allowable GM curve for general cargo and Ro-Ro ships according to SOLAS
Calculation of damaged stability and determination of A / Amax value for passenger ships according to SOLAS
Preparation of loading manuals for trimmed and untrimmed grain cargo
Calculation of weight distribution of light ship
Calculation of allowable bending moments and sheering forces
Calculation of longitudinal strength
Preparation of loading manuals and bulk cargo loading booklets
Preparation of Loading / Unloading Sequence Booklet
Preparation of Cargo Securing Manual
Preparation of Garbage Management
Preparation of Capacity Plan
CONCEPTUAL DESIGN
Determination of main dimensions according to ship type, speed and carrying capacity
Preliminary form design
Speed-power analysis
Calculation of preliminary stability, trimmed and damaged stability conditions
Calculation of preliminary weight distribution
Calculation of longitudinal strength
Subdivision calculations
Preparation of preliminary general arrangement
Calculation of capacities
Feasibility studies
Heli Deck etc. Vibration Calculation
Damage Calculation
CAE ( FEA / CFD )

Finite Element Based Analysis
Statical stress analysis
Linear and non-linear buckling analysis
Fatigue analysis
Thermal stress analysis
Dynamic analysis
Vibration analysis (free and forced vibrations)
Transient dynamic analysis (crushed, earthquake etc.)
Boundary Element Based Analysis
Form Optimisations
Wave analysis around the hull
Stream lines analysis

Finite Volume Based Analysis Viscous flow (Navier-Stokes) Solutions
Prediction of ship friction and viscous pressure resistance
Wake flow analysis and optimisation
Propeller analysis and solving propeller-hull interaction problems
Design and analysis of equipment for propulsion efficiency
Noise induced by flow analysis
Exhaust gas analysis
HVAC system analysis
Mass and heat transfer analysis.
STRUCTURAL DESIGN
Design of midship and typical transverse section details
Design of ship structure and preparation of general steel construction drawings
Preparation of shell expansion and framing system
Preparation of engine room, foundation of main engine and other machinery equipment
Preparation of fore and aft structural details
Design of signal masts and crane columns
Design of hatch covers and ramp
CAD / CAM

Lines fairing
Preparation of manufacturing sections
Preparation of block plans
Determination of building strategy
Design of the 3D structural model
Calculation of block weight and centre of gravity
Determination of element position numbers
Preparation of workshop drawings
Development of shell plates and preparation for cutting
Preparation of shell's bending model
Preparation of NC codes and nesting
MACHINERY, OUTFITTING & PIPING
Design and arrangement of engine room
Calculation of the equipment capacities and selection of equipment
Design of propeller and rudder shaft systems
Calculation of boiler capacity, heating coil length, design of heating systems
Design of ladder, railway, windlass-mooring arrangement and other deck equipment
Design and preparation of piping diagrams
Design of exhaust and ventilation ducts
3 - D pipe modelling and preparation of isometric plans
Preparation of P&A, ODME, Rudder Shaft and Clean Sea manuals
Preparation of Fire and Safety plans
Preparation of Damaged Stability control plans
Preparation of docking and painting plans
Pressure Drop calculation for P/V circuits Preparation of Technical Specification Booklet

[Guest]

I had chanced to see your software services for Ship Theory calculation. I am faculty for BSc[Nautical Science] cadets in a marine college here in India, and would like to use your package to help them solve ship theory calculation which includes calculation on stress calculation.can you help me out?

Regards,
Roy Mohan

[Guest-IJT]

Name : Ravikar Tripathi
Email : ravikartripathi AT gmail.com
Designation / Skillset : technical support engineer

Resume :


Goal
Seeking a rewarding and challenging career with opportunities for future growth and development with the organization, where my knowledge, abilities, & skills are optimized and my experience is channeled towards the success of the organization.
..
Professional Qualification
..
..
Pursuing B .Tech from Babu Banarsi Das Institute of Engineering Technology and Research Centre, Jahangirabad, Bulandshahr under Uttar Pradesh Technical University with an aggregate of _61.92__% in COMPUTER SCIENCE AND ENGG.
Academic Qualifications
- Intermediate from C.B.S.E Board in the year 2006 with 55.2%
- High School from C.B.S.E Board in the year 2004 with 58.8%
..
Technical Skills
..
..
- C Language.
- PHP
- Exposure to Operating Environments Windows 2007/XP/2000.
Projects Handled
- Title Web Auction ( Major Project)
- URL www.webauction.com
- Role Analysis & Design, Development & Maintenance
- Environment PHP
- Database MySQL
- Languages PHP, HTML, MySQL etc.
- Description
Web Auction………………………………………
Personal Skills
..
- Ability to establish rapport and work in a team.
- Strong willingness to learn new skills and abilities
..
000000000000
Extra-Curricular Activities
..
..
Was the head of Discipline Committee at our college annual fest (INNOVISION)

I hereby declare that the above details are true to the best of my knowledge and belief.

Date : ………….
Place : (RAVIKAR TRIPATHI
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4376187
Date & Time : 15th Jul 2011 7:33 PM (UTC)
IP Address : 49.14.112.124
Browser Info : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Predicted Country : --