ww.worleyparsons.com Worley Parsons Engineering Pvt Ltd Mumbai : Piping Design Engineer

[Admin]

Worleyparsons Engineering Pvt Ltd Mumbai : Lead Mechanical/Piping Design Engineer

Designation: Lead Mechanical/Piping Design Engineer
Experience: 15 - 25 Years
Location: Mumbai

Job Description:
Primary objective
Carry out development and detailed design engineering activities, including co-ordination with the various discipline groups.

Specific Accountabilities
- Supervise Mechanical / Piping Design Engineers, Technical competence of personel
- Forecase requirement for Mechanical / Piping Engineering resources and allocate those respores
- Duties will include equipment selection and specification, detail design in collaboration with designers and bid evaluation/ vendor document review and approval.
- Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Oil & Gas Business Unit
- Safety – Responsible for personal safety safe working practices for the Oil & Gas Business Unit. Understand and follow OH&S procedures.

Desired Candidate Profile:
Essential Skills/Experience
- Experienced in the specification, evaluation and documentation of equipment for producing oil/gas fields
- Work is performed in accordance with broad technical guidelines and with minimal supervision.
- Ability to work to tight deadlines and prioritisation of work to achieve them.

Matching Indicators
- Engineering Degree in a revelant discipline
- 15 Years in Mechanical design experience in the Oil & Gas environment, including a minimum of 10 leading the team in Mechanical and Piping Department

Company Profile:
Oil & Gas MNC Detail Engineering

Email Address: resume@worleyparsons.com
Website: http://www.worleyparsons.com

Keywords: codes and standards of Mechanical / Piping

[Guest]

RESUME
VINAYAK CHANDRAKANT PARAB

Email-vcparab83 AT gmail.com
Working in ‘TATA Consulting Engineers Limited’ (TCE) as Senior Piping Engineer in materials, procurement, contracts & layouts, Previous experience of Construction & Fabrication of Refinery Piping & Process Equipments with ‘Mukand Engineers Ltd & Godrej’.Started with Godrej as Graduate Engineer Trainee. Total 6+ years of cross functional experience in Design.
KEY AREAS OF EXPERTISE
Material Specifications & Procurement Assistance.
1) PMS making as per BEP (Basic Engineering Package).
2) All types of valves data sheets prepared & maintained, updated.
3) All types of specialties data sheets made like, hoses, flame arresters, floating suction, bellows.
4) Technical specifications prepared for NACE/ /Oxygen/Cryogenic / IBR/ Process/ chlorine, services.
5) Making & issuance of RFQ (MR), follow up and receipt of quotations, Review of vendor offers, Making & Analyzing of Technical Bid Tabulation, Decision making on technical deviations taken by bidders for acceptability, Checking acceptability of quoted items as per EIL enlistment of Bidder.
6) Preparation of Commercial Bid Tabulation, Formulation of Commercial Terms and Conditions and final placement of Purchase Order in order to meet the schedule.
7) Repeat order proposal making & executing for reducing procurement cycle time.
8) Developing traders for crash purchase, Indian as well as foreign.
9) Vender list development for Special Piping Commodity, for e.g. (High Tensile Brass Valves/ Rubber Bellows)
10) Desk expediting for engineering documentation and manufacturing review.
11) Day to day co-ordination with vendor, to meet delivery date & assisting inspection department for technical queries clarification to ensure proper flow of material as per site construction requirements.
12) Preparation of ‘Valve data sheets’ for all types of valves.
13) Vender drawing review for Valves, Traps.
14) Technical assistance given for vender queries clarification.
15) Working knowledge of piping design codes & standards such as ASME, ASTM, ANSI, MSS SP
16) Instruct and coordinate with subordinates, such as junior piping material engineers, design engineers etc
17) Coordinate and/or negotiate with, vendors and other discipline engineers
18) Help inspection to clear inspection technical queries from vender’s works.
19) Preparation of piping fabrication & erection technical tender for CPCL & BPCL
20) Have good library of catalogs & vender contact data backup, for budgetary offers & technical data
21) Working out Bulk & final MTO.
PROFFESSIONAL EXPERIENCE
1) TATA Consulting Engineers Limited, Mumbai, Maharashtra 1st Jan 2007 – Till date
Chemical & Industrial Business and Oil & Petrochemicals.
PROJECT WORKED AS MATERIAL PROCUREMENT ENGINEER.
o EPCM consultancy services for EURO-IV project at Manali, of CPCL, Chennai Petrochemicals (IOCL)refinery :
Items Procured with TBA done are as follows
- Valves : Manual /Gear operated (Ball, Gate, Globe, Check, Butterfly,Piston). Jacketed Valves.
- Fasteners : Alloy steel, Carbon steel, Stainless steel (M/C Bolts & Stud Nuts with NACE requirements)
- Gaskets : Metallic, Non-Metallic, GarloK Gylon (For Oxygen Service).
- Steam traps : Thermodynamic, Compact Stem supply & Condensate collection manifolds. BPT traps
- Pipes : As per IS/ ASTM
- Rubber Expansion Bellows.
- Pipe Fittings : Wrought, Forged, Fabricated.
- Braided hoses for Steam, Air, Water application.
- Flame Arresters. (Deflagration Type).
- Floating Suction (Swivel Joint) for Naptha storage tank.
- PSV Exhaust Silencer.
- Fire Protection equipments (Oscillating Water Monitors, Double Hydrant Valves).
- Preparing & maintaining ‘Financial commitments” for all project.
- Preparing & maintaining RFQ tracker, with expediting with client for pending orders.
- Cost estimation data bank preparation & maintenance.
- Procured all engineering items worth 5 Corore of value.
o EPCM consultancy services for BPCL(Bharat Petroleum Corporation Limited) Mahul (Mumbai) Refinery for CCR Offsite & Utilities.
- Procurement & Contract lead for BPCL project handling team of 5 peoples.
- Vender list finalization by proposing new vender addition on basis of past project order value analysis study, i.e % wise orders booked by proposed bidder.
- Taking budgetary quotes from bidder network for enquiry preparation.
- Piping site fabrication & erection techno-commercial tender made for tie in points & for other associated piping.
- Demountable flare system tender evaluated of height 125 mtr & 600 TPH capacity estimated value of Rs.73 Corore.
- Cost Estimation done for, Demineralization Water Plant (All CPVC Piping Commodities).
- Technical specifications (Material Requisition) made for all piping bulk items, with vender list finalization.
- Compressed Air System tender finalization.
- RFQs made for equipments like KOD.
- All Piping Bulk Items (Pipes, Flanges, Fittings, Fasteners, Gaskets, Valves) procurement.
- All piping commodities for tie in points procured from traders, after trader list finalization.
- Piping mechanical works contract finalization.
- Press notice (Global Tender) done for ‘Civil Works’ & ‘Cooling Water Pumps Supply’.
- Shut down material procurement & planning through traders.
- All procurement activities from planning of RFQs, making of MRs evaluating bids techno-commercially, TCQ preparation CBA/TBA , Unit rates comparison, final recommendation preparation for all piping items.
o EPCM consultancy services for IOCL(Indian Oil Corporation Limited) Paradip Refinery for LPG storage & distribution terminal,
- Item rate tender made for supply & erection portion.
- Piping commodity estimation on basis of MTO taken for tender SOR with supply & erection rates.
- Mounded bullets of 100 mtrs long all BQC done & commercially evaluated four bidders up to PBO.
- Painting & Insulation MTO generated with all cost estimation.
- For all items cost estimation back up made from budgetary quotes taken from manufacturers.
o EPCM consultancy services for Oryax Refinery through DOPET at Qatar. For sulfur recovery unit.
- All technical specifications made for
a) Non metallic Pipes & Fittings RTRP (GRP)
b) Metallic Pipes/ Fittings/ Flanges / Gaskets/ Fasteners etc
c) All generic valves like Gate/ Globe/ Check/ Ball/ Butterfly/ Plug Valves.
d) All specialties like steam traps, strainers.
e) All TBA (Technical Bid Analysis) done for above mentioned items
f) Vender query clarification & final vender drawing checking for valves & specialties done including jacketed valves.
g) Checking bidders offer with respect to applicable API/ BS/ IS/ ASTM/ ASME/ MSS standards.
h) Replying to client & vender’s technical queries.
o EPCM consultancy services for Kansai Nerolak Paints at Bhawal MP.
- Technical Datasheets made for all kinds of valves & specialties.
- Metallic Bellows/ AODD Pump Air Filter/ Hoses/ Sight Glass/ Basket, Tee, Y strainers/ TD, BPT,IBT,BFT steam traps/ 3-way valves/ Diaphragm Valves.
o Detail Engineering For Ammonium nitrate Solution ISBL plant at Taloja, Maharashtra for Deepak Fertilizes Ltd :
- VMS (Valve Material Specifications) made for Ball, Gate, Globe, Check, Butterfly valves.
- Steam Injection valves.
- Traps & Strainers.
- Vender drawings checked for all types of valves of M/s BDK Valves
PROJECTS WORKED ON AS PIPING ENGINEER :
o Detail engineering for DHDT unit using PDMS 3D modeling for GGSRL(Guru Govind Singh Refinery) Bhatinda (HMEL) (Hindustan Petroleum & Mittal Energy) under EIL;
- Under Ground area piping for DHDT unit.
- Knockout drums area piping for flare.
- Exchanger area piping.
o Detail Engineering for services for PDH O&U project in EGYPT for (EPPC) Egyptian Poly Propylene Company, under UHDE, using PDMS for 3D Modelling :
- “Demineralize Water” plant piping.
- Rubberlined piping system piping.
o Detailed engineering & (SP3D) 3D modeling of Continuous & Batch Polymer resin plant at pithampur , indore for SRF (M/s Shreeram Resins & Fibers) under Aqafil Engineering Germany :
- Isometric checking & releasing for construction with respect to design guidelines.
- Lines rerouting as per stress comments & flexibility concerns.
- Model review with respect to operation – maintenance & modifying same.
o Detailed engineering inspection and expediting services for Prefre-3A (P3A) project at kalpakkam for BARC : using PDMS for 3D Modelling
- Nuclear Waste tank farm piping (PDMS 3D Modelling).
- Process area drain piping for activity area.
- Uranium chemical preparation unit building piping.
2) Mukand Engineers Ltd. Kalwe One year on hand experience as site engineer at Kochi Refinery Site Kerala of all piping jobs from July 2004 to May 2005
Functionally responsible for
- Routing of lines as per Isometrics, P&Ids, GADs, and successful completion of shut down jobs
- Worked as piping engineer in SWS, SRU, and ARU & DHDS units under consultancy of ‘EIL’
- Worked in the shutdown of 60 days in SWS unit including shut down planning.
3) Emerson Network Power (India) Ltd. One & Half year of plant set up experience as Industrial Engineer from June 2005 to December 2007.
Functionally responsible for
- Plant Layout & set up of new assembly plant at Nerul Navi Mumbai.
- Routing of utility lines from air compressor to inside plant for instrument air supply.
- Work station design, work study, time study for all kind of products.
- Plant estimation & all subsequent tools, storage system, forklift ordering
4) Godrej & Boyce Mfg Vikroli - Six months in plant training at plant 15(Process Equipment Division) columns & heat exchanger manufacturing Vikhroli
Functionally responsible for
- Ferrite content test, radiography offering , helium leak test, hydro test for QC department
- Marking of nozzles, cleats, TSR, stiffening rings on column section & on dish end.
Professional Training Attended-
1) Armstrong steam engineering training lecture.
2) Seminar on “Procurement of Services”
3) Seminar by Uni-klinger on steam products.
4) Seminar by Lubrizol & George Fischer on non metallic piping products.
5) Seminars by various valve manufacturing venders like bellow seal valve etc.
6) Insulation Material vender presentation.
7) Vass Industries Knife Edge Gate valves seminar.
COMPUTER SKILLS
Proficient in WINDOWS-98/XP and MS- OFFICE, AUTOCAD, PDMS, Nevis Works, Review Reality (AVEVA)
EDUCATIONAL QUALIFICATION
- B.E. PRODUCTION ENG. : Konkan Gyanpeeth’s COE, Mumbai With First Class, 66.58 %. Year 2004
- Post Graduate Diploma : Suvidya Institute of Technology, Mumbai With First Class, Year 2006
- H.S.C. : New Modern College Vashi, 76 %, Mar’2000.
- S.S.C. ;: Navodaya Vidyalaya (CBSE), 70 %, Mar’1998

[7.chauhan@gmail.com]

how can i delete a post i posted before against a recruitment advertise?