www.jacobinspec.com Jacob Inspection Services Pvt Ltd Jamnagar : Mechanical Engineer, Piping Inspector, Welding Inspector, Coating Inspector

[Admin]

Jacob Inspection Services Pvt Ltd Jamnagar, : Mech Engg / Piping Inspectors / Welding Inspectors / Coating Inspector

Designation: Mech Engg / Piping Inspectors / Welding Inspectors / Coating Inspector
Experience: 5 - 7 Years
Location: Jamnagar,
Rajasthan

Job Description:
Mechanical Engineers for Equipment Installation & Commissioning , Piping Inspectors for Pipeline Inspection with Cross Country Pipeline Experience , AWS Welding Inspectors & Engineers with CCP Experience , Coating Insp with NACE / Bgas Knowledge

Desired Candidate Profile:
PIPELINE LAYING, NDT, PRE-COMMISSION & INSTALLATION ACTIVITIES

Company Profile:
Full time inspection company engaged in short term site contracts, currently looking for mechanical engineers, welding inspectors & engineers with AWS / CSWIP, coating inspectors with NACE / Bgas knowledege, Senior Piping Inspectors,

Email Address: admin@jacobinspec.com
Website: http://www.jacobinspec.com

Keywords: Mech Engg , SPI , Coating Engineers, Welding Engineers & Inspectors

[sbalaji]

RESUME

S.Balaji
New: No: 97, Old: No: 110,
Karthikeyan Road,
Saidapet, Arni,
Pin code: 632301
Tamilnadu, India
Phone No: 04173 226688
bva_balaji AT yahoo.com
Contact Number : 91-9500859052

Skill Set:
· 4.5 Years Experience Pipeline & Almost In 4 Pipeline Projects
-All Activities Of Route survey, Row opening, grading, Mainline Welding, Joint Coating, Trenching, Lowering, Backfilling, Restoration, Ofc Blowing, Ofc Splicing, Hrdrotesting, Markers Installation, Obtaining NOC from Land Owners. Worked Pipeline Diameters 48”, 38”, 16’, 14”, 12” & 10”.
· Erection 7 Years In Piping & Vessels, Fabrications And Erections- Fabrications Of Pressure Vessels & Erections, Fabrications Of Piping & Erections, Hydro Testing, Billing

Professional Experience / Project :
v October 2006 – April 2009: Pipeline Site Engineer,
Reliance Engineering Asst, Pvt, Ltd.
Owner Is Reliance Gas Transportations Pvt, Ltd. Mumbai
EWPL- Pipeline Project.
Gas line 48” Dia, 203 Kms

v October 2005 - May 2006: Pipeline Site Engineer,
R.R.Constructions & Engineering,
Owner Is Gujarat State Petronet Ltd.
MVPL-Pipeline Project.
Gas Line 38” Dia, 90 Kms

v March 2005 - September 2005: Hydro test Engineer,
Narmada Pigging & Testing Service,
Owner Is CPCL, Chennai.
CMTPL- Pipeline Project.
Oil Line16”,14”,12”&10” Dia,
255 Kms

v February 2002 - March 2005: Piping Executive Engineer,
MetalCafts Engineering’s, Jamnagar.
Owner Is Reliance Petroleum Ltd.
Piping & Equipment Erection Elevation Up to 50 Meters.

v June 2001 - December 2001: Scaffolding Supervisor,
Hyundai Engineering’s & Construction Ltd, IRAN.
Owner Is Total South Pars Field Development, IRAN.
Scaffolding Erection & Dismantling

v February 2000 - September 2000: Pipeline Supervisor,
Delta Engineering’s & Co.,
Owner Is GAIL, India.
Mainline pipeline Activities.
Oil Pipeline 16” & 14” 60 Kms

v June 1999 - January 2000: Maintance Supervisor,
Larsen & Tubro Ltd.
Owner Is Dabhol Power Project, Maharastra, India.
Batching Plant Maintenance team.

v February 1998 – March 1999: Supervisor,
Plus Tech Engineering Pvt, Ltd.
Owner Is Reliance Petroleum Ltd, Surat.
Heat Exchanger & Piping Erection.

v July 1996 – October 1997: Supervisor,
Plus Tech Fabricator’s Pvt, Ltd.
Owner Is Larsen & Tubro Ltd.
Surat.
Pressure Vessels Fabrication.

Educational Qualification:

1992 – 1993 10th S, S, HR, SEC, SCHOOL, ARNI, TAMILNADU.

1993 – 1996 DIPLOMA IN MECHANICAL ENGINEER IN RAJAGOPAL
POLYTECHNIC, GUDIYATTAM, TAMILNADU.

Personal details:
Name : S.Balaji
Date of Birth : 01 October 1976
Nationality : Indian
Sex : Male
Marital Status : Married
Languages Known : English, Hindi, Tamil, and Malayalam.
Passport Detail : Passport No: A 9457081, Issued Place – Chennai, Validity up to – 02/02/2011.
Driving License : Indian D.L.
Father Name : P.N.Shanmuganandhan.
Phone No : 04173 226688
Permanent Address : New: No: 97, Old: No: 110,
Karthikeyan Road,
Saidapet, Arni,
Pin code: 632301
Tamilnadu, India.
Reference:
B S Jadaoun
Sr. Manager-Project
Velosi Certification Services (I) Pvt Ltd.
Mobile No: +91- 9958839193 / 9960940796 / 9921673112
E – Mail Id: bsjadaoun AT velosiindia.net
bjadaoun AT gmail.com

Declaration:
I hereby declare that the details furnished above are true to the best of my knowledge

Regards,

S.BALAJI
09500859052

[Guest]

I S BATRA
H. NO. 826, SECTOR- 8,
FARIDABAD-121006, HARYANA
9717396099, 9868334124 (MOBILE)
0129-4101503 (RESI)
Email: isbatra AT airtelmail.in
isb442002 AT yahoo.com

EXPERIENCE 30 YEARS.
16 OCT-2008 TO CONTINUE WITH M/S DEE DEVELOPMENT ENGINEERS P LTD
FARIDABAD- HARYANA
NATURE OF BUSINESS M/s Dee Development is manufacturer of pipe fittings & prefabricated power piping for power plants & is manufacturing prefabricated power piping as per “S” and “PP” stamping as per ASME. M/s Dee Development Engineers is certified for ISO: 9001, ISO: 14001, ISO: 18001 & PED 97/23EC, IBR.
HEAD QA/QC
- Looking after QA functions & working as MR FOR ISO:9001, ISO 14001, ISO 18001 &
- PED 97/23EC system
- Liaison with client & Third party inspection i.e. LYODDS, Thermax, BHEL/ PDIL,
- EIL, TPL, BVIS, SGS, TUV, L&T & HSB (NOTIFIED BODY FOR PED.
- Responsible for Fabrication shop & vendor evaluation/development.
- Responsible for complete QA functions from Incoming Inspection to Final
- Inspection stage for fittings as well as pre fabricated piping of Carbon steel,
- Alloy steel & Stainless steel.
- All type of NDT testing RT, MT, PT, UT
- Looking after for Laboratory of chemical, mechanical & metallurgical testing.
- Preparation of WPS/PQR/WPQ and approval from Third party inspection
- Agency.
09 NOV-2004 TO 15 OCT 2008 MACAWBER BEEKAY (P) LTD NEW DELHI
NATURE OF BUSINESS MACAWBER BEEKAY P LTD. AN ISO: 9001 COMPANY IS A JOINT VENTURE WITH CLYDE BURGEMANN MATERIAL HANDLING LTD. UK. MANUFACTURING PNEUMATIC ASH HANDLING SYSTEM TO VARIOUS POWER PLANTS, CEMENT PLANTS, PAPER & PULP INDUSTRIES AND COAL PLANT etc.
SR. MANAGER (QA)- HOD
- Looking after QA functions, ISO:9001 system
- Liaison with client & Third party inspection i.e. LYODDS, Thermax, NTPC,
- BHEL, EIL, TPL, M N Dastur, Mecon & L&T etc.
- Responsible for Fabrication shop & vendor evaluation/development.
- Responsible for complete QA functions from Incoming Inspection to Final
- Inspection stage.
- To prepare/ approval of WPS/ PQR/WPQ & QAP for the product.
NOV-1999 TO NOV- 2002 M/S MAURIA UDYOG LTD. FARIDABAD
NATURE OF BUSINESS MANUFACTURING OF LPG EQUIPMENT i.e. LPG CYLINDERS, LPG VALVES, & REGULATORS FOR DOMESTIC & EXPORT AS PER NATIONAL/ INTERNATIONAL STANDARDS
DY. GENERAL MANAGER
Apart from Quality control I was looking after productions- fabrication, machine shop, forge shop, die casting section powder coating, Electro-plating & development of new vendors.

- Liaison with CCOE, Nagpur for approval of Design/ Drg of LPG equipments.
- Approval/ dispatch clearance of equipments from BIS.
- Written Quality system manual.
- Set up laboratory for rubber components & springs.
- Made system for rejection control.
- Made new gauges & checking fixtures for better & accurate measurement.
- SPM for Neck welding of LPG Cylinders by GMAW welding.
- Also looking after Zinc plating & surface treatment.
- Casting development & product engineering.
- Set up electro plating unit.
To achieve the production target.
- Control of workers & staff.
- To make budget effectively to enforce the same.
- Make the production cost effective i.e. to reduce the manufacturing cost.
- To plan & ensure preventive maintenance & proposed maintenance of all the
- Items required.
JAN-1986 TO AUG-1999 M/S HINDUSTAN WIRES LTD. FARIDABAD
NATURE OF BUSINESS MANUFACTURING OF LPG EQUIPMENT i.e. LPG VALVES, REGULATORS & LPG CYLINDERS FOR DOMESTIC & EXPORT AS PER NATIONAL/ INTERNATIONAL STANDARDS
QUALITY CONTROL MANAGER-HOD
Liaison with CCOE, Nagpur for approval of Design/ Drg of LPG equipments. Approval/ dispatch clearance of equipments from BIS. Written Quality system manual. Set up laboratory for rubber components & springs. Made system for rejection control. Made new gauges & checking fixtures for better & accurate measurement. Also looking after Zinc plating & surface treatment. Developed new products for LPG Cylinder, Valves & Regulators. Minimize the shop floor rejections.
FEB-1982 TO NOV-1985 M/S FAG BEARINGS INDIA LTD. BARODA
NATURE OF BUSINESS MANUFACTURING OF BALL & ROLLER BEARINGS
SECTIONAL ENGINEER QUALITY CONTROL
TO look after complete quality aspects of cylindrical & spherical roller bearing from inward till final products.
- Completely restructure the inspection dept.
- Develop system of rejection control.
- Set up independently standard room.
- Prepare inspection & calibration manual for instruments.
- Minimize the shop floor rejection in case of forging & heat treatment by
- maintaining all the parameters lay down in standard and increase productivity
- Indirectly by saving repairing work in the material.
- Final approval/ dispatch clearance of bearings from RDSO/ RITES.
Jan-1981 to Feb-1982 M/S SHAMMA ENGINE VALVES LIMITED BHOPAL
NATURE OF BUSINESS MANUFACTURING OF AUTOMOBILE VALVES
Asst. Engineer(Quality Control)
- To look after complete quality aspects of automobile valves incoming to final
- Product.
- Third party inspection of valves made for railways & Defence by RITES/RDSO.
- Liquid penetration & hardness test for railway valves.
- Macro & micro examination of valve material grain structure.
Jan-1978 to Oct-1980 M/S PRINTERS HOUSE P LTD. BALLABGARH
NATURE OF BUSINESS MANUFATURING OF SHEET FED OFFSET PRINTING MACHINE.
INSPECTION SUPERVISOR
- To look after complete quality aspects of machine shop components & final assembly of printing machine.
SPECIAL TECH COURSES - LEAD AUDITOR COURSE FOR ISO: 9000-2000 QUALITY MANAGEMENT
- SYSTEM FROM M/S BSI BUSINESS SOLUTIONS LTD. UK.
- INTERNAL AUDITOR COURSE FOR ISO: 9002 -1994.
- COMPUTER PROFICIENCY - MS-OFFICE, AUTO-CAD & ERP.
- NDT LEVEL II FOR UT, RT, LPT & MPT FROM JSNT GURGAON.
- LEADERSHIP DEVELOPMENT PROGARM FROM HOLISTIC TRAINING
- SOLUTIONS NEW DELHI.
QUALIFICATION 1974-1977 DIPLOMA IN MECHANICAL ENGG. WITH 72% MARKS FROM GOVT. INSTITUTE OF SI TECHNOLOGY SONEPAT
PURSUING PGDBA (OPERATIONS) FROM SYMBIOSIS, PUNE
PERSONNEL INFORMATION DATE OF BIRTH : APRIL1, 1959
MARITAL STATUS : MARRIED
SALARY DRAWN (CTC) : RS 11,00,000/- PA
SALERY EXPECTED : NEGOTIABLE

I S Batra
Faridabad

[Guest]

RESUME
Ajgaonkar Nikhil Madhav
E-mail ID : n_ricky2u AT yahoo.com
Respected Sir,
Being given to understanding that there are some vacancies for above mentioned post in your esteemed organization.
I offer myself as a candidate for the same. Here below I give my particulars for your kind Consideration. Do have look on it.
Computer Qualification : MS Office and Internet;
Technical Qualification : ASNT LEVEL-II as per SNT-TC-1A
Ultrasonic Testing
Radiographic Testing(INT)
Magnetic Particle Testing Liquid Penetrant Testing
Work Experience :-
working as an NDT Technician With M/s Quality Enterprises, C/O Mr. Arvind Bhide (Mumbai) till date.During this period performed various NDT methods on various sites ( LAST 4YEAR)
1. Reliance Industries Ltd.(Patal Ganga &Surat-Hazira) carried out UT of weld joints of pressure vessel and sphere and lamination check of plates
2. BPCL(chembur)Carried out shafts & UT of weld jonts in pressure vessel.
3. HPCL(chembur)Carried out UT and MPT of weld joints, Shafts and forgings.
4. INDAL(Belgaum) Carried out UT and MPT of weld joints of slurry tanks and castings.
5. Slumberger (Vaizag)Carried out UT thickness Gauging of their Offshore equipments under Bureau Veritas.
6. Tubestar Ltd{Working on equipmens of Offshore} Carried out UT on Drilled Pipe in Kakinada sea port(A.Pradesh), Paradeep Port Trust.(Orissa). I.T.S(Mumbai).For same company Carried out UT on Tubings of onshore in Mehsana(Gujarat).
7. Nafta Pita (Int.) Carried out MPT for Mast Inspection in Rajasthan.
8. Carried out UT on Shafts of Sugar Factory in Bardoli.
9. Worked on the project of chemical process Eqpt Ltd carried out UT on debonding check under German Company LURGI BISCHOFF.
10. Carried out UT & LPT of weld joints of tanks Under Nuclear Power Corporation Ltd.

11. FINOLEX INDs Ltd Carried out UT of tee joints of sphere and storage tanks.
12. RELIANCE PETROLEUM Ltd Carried out UT of weld and high
temperature thickness gauging of crude oil columns.
13. Working as a sight incharge in MAZGAON DOCK LTD. Since 3 ½ yrs
in contract base under Indian Navy at Submarine secret project.

Extra circular activities :
1. Played for Balmohan Vidya Mandir, Harris Sheilds, Gail Sheilds, Vinu Mankad Trophy,
Coca-cola cup,Kellogs cup.
2. Mumbai Cricket Association- Under 14, Under 16, Under 19.
3. Dilip Vengsarkar (ELF Acedamy) Under 16, Under 19.
4. Played for Ambedkar college Inter College & C.K.Naidu (as captain)
5. Played for Sunder Cricket Club From last 5 years as captain
Kanga league ‘C’ division
6. Played for Mumbai Junior Cricket Tournament Summer Sheild.

[Guest]

sir,
i am a fresher in my field. If any job vacancies matching my cv please let me know
thanking u,
sarang

[Guest]

Resume
Carrier Objective;
Seeking a challenging position, utilizing my abilities developed through my experience and education with an opportunity for carrier growth based on my merit and to promote the growth of the organization.

Name : Udaya Kumar. CH
E-mail : skumar1767 AT yahoo.com
Academic Qualifications;
Diploma in Mechanical Engineering.

Professional :
CSWIP 3.1 Welding Inspector. As per TWI.
ASNT NDT Level II (UT, MT&PT) As per ASNT-TC-1A.



Work Experience :

1) Worked in "M/S KUB Quality Services", India as Inspector and NDT Technician since MAY 2003 to NOV 2006.

Nature of job;
General : Conduct NDT services, Third-party Inspection for.
- Petro Chemical and refineries
- Boiler/ Pressure vessels/ Cement Manufacturers
- Forging and Foundry Industries
- Prepare mock-up pipes; perform flaw detection &evaluation as per the
Written procedures and standards.
- Perform required inspection like Visual, Dimensional, MPI,UT for steel
Materials.
- Documentation and reporting.
Perform NDT in front of third party Inspectors of LLOYDS, NPCL.DNV, BV, etc.
- To co ordinate NDT related issues between manufacturer& Inspection Agencies.
Major Projects Handled :
Koyna Hydroelectric Project (Stage IV)
- Ultrasonic Flaw Detection of Pins and Links.
- Magnetic Particle Testing of Pins and Links.
MSP Steel and Power Ltd/ Rangraj Ispat /Goa Sponge and Power, India
- Ultrasonic and Magnetic Particle Testing of Kiln and Cooler welded Joints
HPCL, Loni.India
- Ultrasonic Thickness Gauging of Floor and Floating Roof of HSD Storage Tank
Aluminum Bahrain Project Line 5 Expansion Project (Intl.Bechtel Co.Ltd)
- Ultasonic testing and Magnetic Particle Testing of 12.2T Crucible Lifting Beam Bail
Pinaka Rocket Tubes for Govt.of India at HYT Engineering, India
- Dye Penetrant,Magnetic Particle and Ultrasonic Testing
Windmill Project for Suzlon India Ltd
- Ultrasonic Testing of Castings, Like Axial Plates,Lock Plates,Gear Mountings, Adaptors Etc.
Rock Processing Unit for Sweden at Sandwik Asia Rock Processing, India
- Ultrasonic and Magnetic Particle Testing of Feeder Body, Jaw Master’s Weld Joints Etc.
2) "M/S DPAL VAM drilling.", Dubai, UAE .as a Quality Control Inspector since DEC 2006 to AUG 2010.

Nature of duties and Responsibilities :

DPAL VAM Drilling is the manufacturer for Drill Pipes by Friction welding for Drill pipes and threaded tool joints as API Specifications.
- Doing Raw material Inspection for Drill Pipes and Tool Joints.
- Doing in process inspection for welding, Heat treatment parameters.
- Perform Ultrasonic and Magnetic Particle Testing for upsetted Pipes.
- Conduct Visual, Dimensional, Hardness, MPI, UT inspection for weld zone of drill pipes.
- Calibration and standardization for all sizes (2-3/8" to 5-1/2" OD) of drill pipes weld zone UT inspection.
- Attend inspection stages at Final inspection of Drill Pipes and Tool joint threading, Hard banding inspection as given instruction by Quality Manager.
- Reporting problems to my superiors and raise non-conformance report for all non-conforming products.
- PRESENTLY WORKING AS LEVEL II INSPECTOR IN OIL COUNTRY TUBULAR LTD., INDIA. (NARKETPALLI – HYDERABAD). FROM : JAN-2011 TO TILL DATE.
COMPANY PROFILE :
OIL COUNTRY TUBULAR LIMITED Production is commencement in year 1989 collaboration with BAKER HAUGHES TUBULAR SERVICES(USA),
- Unique Integrated Manufacturing facility.
- Manufacturing Wide range of Oil Country Tubular Goods (Drill Pipes, Heavy Weight Drill Pipes, Drill Collars, Production Tubing’s, Casings, Rotary Subs and Crossovers.)
- Production as per API Specifications.
Oil Country Tubular limited
- Handling independent inspection at shop floor at different departments of production as per spec 7.
- Specialized in EMI 1 & 2 inspection,
- Carrying independent shift handling of NDT department. Works include EMI, Black light inspection, visual and Thread inspection.
- Documentation as per ISO 9001.
NATURE OF WORK : Working in Oil Country Tubular Ltd, as an asst Engineer in Quality Control & Quality Assurance, from jan-2011 to till date
M/s OIL COUNTRY TUBULAR LIMITED, Nalgonda(Dist.), Andra Pradesh. This is an API certified & ISO 9001-2008 Company, and it is largest producing products of Oil Country Tubular Goods.
PRODUCTS : Drill pipes, Heavy Weight Drill pipes, Casing & Tubing Pipes, Cross overs, Tool joints, Drill Collers, etc.
1 Drill Pipes & Heavy Weight Drill Pipes : As per the specification’s 5-DP & 7-1 addendum-1
2 Tool Joints : As per the specs -5DP & 7-2.
3 Casing & Tubing : As per the specs -5CT, 5B & 5L.
Drill Collars & Cross Overs : As per the specs – 7-1 & 7-2
WORKING SKILLS
My Job profile is to carry inspections at following areas : of QC&QA
1 Strong command on Non-destructive testing such as Magnetic Particle Inspection, Electro Magnetic Inspection.
2 Maintaining ISO documents.
3 Co-ordination of Internal Audits & External Audits (API, ISO and Customer)
4 We are very familer Spec 5DP, Spec 7-1 & 7-2, Spec 5B, Spec5CT.
-
Experience Summery In Welding Inspection;
- Qualification of welding operators and dimensional inspection of structures and pipe before and after welding.
- Visual inspection and Non-Destructive testing welds, seams in accordance with standards.
- Preparation of inspection procedures.
- Inspection of materials which includes receives inspections and item identifications as per specified drawings and specifications.
- Approval of welding procedures and specifications and qualifications of welding performers as per ASME standards.
- Dimensional inspection of structures and pipe fittings before and after welding.
- Welder Qualification on as per ASME sec. IX .preparation of WPS&PQR as per inspection and test plan requirements.
- Receive inspection of raw material & performing field inspection for on going welding and finished weld ments at site.
- Review of WPS, PQR and conducting welders Qualification Test and preparation of all documents and reports for final acceptance of clients, consultants and third party inspectors.
- Inspection of welding at various stages like baking of electrodes preheating & PWHT.
- Weld visual inspection DP inspection Materiel identification.
- Conducting and identification of Ultrasonic, Dye Penetrating Testing, and Magnetic Particle Inspection Examination.
- Preparation of test packs and final Documentation.

Responsibilities
- Visual Inspection.
- Code of practice for visual inspection.
- Inspection before, during and after welding.
- Inspection before, during and after assembly.
- Checking partially and fully (visual and NDT).
- Checking re welding and re inspection.
- To prepare mock-up pieces, perform flaw detection & evaluation as per the written procedure and standards.
- Re testing after rectification.
- Documentation and reporting, to perform NDT in front of third party Inspector.
- To coordinate quality control related activities in between manufacturer & Inspection Agencies.
Types of Materials Handled :
- Carbon Steel, Alloy Steel as per various codes and standard.
- Nickel, Copper, Titanium as per ASME Sec II B.
Codes and Standards known :
- ASME Sec VIII Div 1,
- ASME Sec V,
- ASME Sec IX,
- API Spec 5D and 7.
- API 1104.

Computer Knowledge :
MS Word, MS Excel, MS PowerPoint,

[Guest]

Dear Sir/Madam,
APPLICATION FOR THE POST OF NON- DESTRUCTIVE TESTING (NDT) TECHNICIAN Level -II
I am glad to apply for the above post out of your esteemed organization. I have completed NDT Traning at TRINITY INSTITUTE OF NDT TECHNOLOGY Bangalore (India)
ü Certified as Level II as per ASNT-SNT-TC-1A in following courses,
· Ultrasonic testing
· Radiographic testing
· Magnetic particle testing
· Liquid Penetrate testing
· Radiographic film interpretation
During my training period in the training centre I have the opportunity and privilege toLearn the skill, abilities and hands on which enable me to learn theatrically and practically on NDT Technician (Piston / Turbine-theory only).

I have 1 year of working experience as a NDT Technician and QA inspector in
M/s. Amar Construction Co. PVT. LTD, Barouni, Bihar
Ø Working experience as Inspection Engineer for a company associated with NDT Technician
and QA Inspector.
Ø Experienced with codes such as ASME Sec V, Sec VIII, Sec IX, API 5L, API 1104, IS 3589
During the training period I meant through basic supervisory course and NDT(Non Destructive Testing) to fulfill the requirement of Human Resource Ministry Level Certificate Program and having certificates in ITI Fitter Trade engineering, Supervisory and NDT (NON DESTRUCTIVE TESTING). Inspecting and issuing Radiographic test on pipe joints and Various jobs. Thickness gauging on Pipelines, Tanks, Boiler.Ultrasonic thickness inspection of welded pipes, plates & various kinds of jobs.Visual inspection of piping supports as per Quality plan and procedures maintaining daily records and reporting to the client. Visual Inspection of piping supports as per Quality plan and procedures Verification and Review inspection reports. Carrying out the welding inspection before, during and after welding operation as per Approved test plan, relevant engineering drawing, and International standard and project specification.Performing activities as per Inspection Test Plan and Method Statement for Various activities involved in the construction of Petrochemical Plant as project specification & Relevant international standards and getting approvals from the client. Coordinating with client inspection department at various stages of fabrication activities and getting approval. Conversant with International Codes like ASME section II, V, VIII, IX, API 1104.Magnetic particle testing and Liquid Penetrate tests & Radiographic test on pressure vessels, Pipelines and steam turbines generators etc. Carrying out film interpretation through various Acceptance standards
I hope my application for the post of NDT Technician level-2 will be considered by your Organization and if I am chosen I will provide my best to the company vision and goal. I attached here with my Resume & Covering Letter, NDT Level II CERTIFICATE and expernice certificate letter to prove my experience if I am chosen.
kindly see the attachment of my resume. If i am suitable for the NDT job please reply as soon as possible
Thank you.
Yours Sincerely,
(Md. Iqbal)

[Guest]

Based on my experience with this company, this company will not pay on time and also they are looting all our money. Always squeezing candidates and not given value for humans. Please be careful with this company

[Guest]

Dorian A. Smithey
doriansmithey AT yahoo.com
EMPLOYMENT
School District of Philadelphia Jan 2011- present
Mechanic - Ironworker Philadelphia, PA
Duties : performs journeymen level work in welding, fabricating, erecting, installing and repairing articles made from both iron and steel. Typical examples of work include, but are not limited to, repairing and installing heating and ventilation systems, etc. Overseeing the work of general helpers and trainees and performing related work as required
Container Research Corporation 2010 - 2011
Welding Inspector Glen Riddle, PA
Duties : Inspection and testing of welded joints of work in progress. Completed inspections of aluminum and steel units for visible defects, correct dimensions, joint strength, bead formation, and weld penetration in conformance with layout, blueprint, and work order specifications. Critical inspections on helicopter and airplane parts.
Codes/Standards : ISO 9001:2000 AWS D15.1, AWS D17.1, AWS D1.1, and AWS D1.2
MIL-DTL-5541
Contracts for government clients : Boeing, Lockheed-Martin and U.S. Armed Services
Welding Services Incorporated 2007- 2009
Atlanta, GA
Duties : The company provides NDT and Inspection Services. As an inspector, I provided day-to-day testing and inspection on piping in oil refineries (specifically BP, Carson and Chevron). NDT processes:
- Visual testing
Code/Standards : ASNT – TC-1A
Coordinated company to apply NDT testing specifically UT, MT, PT, RT, Phased Array, and PWHT; also examined dimensions, offsets and fit-ups of piping systems; logged or filed information about welders on weld travelers; maintained weld counts, weld maps and isometric drawings
B 31.3 (Piping material - stainless steel)
RM Mechanical - 2006
High Purity Semi Conductor Mechanical Installations Boise, Idaho
QA/QC
Duties : Weld inspections; material inspection; recording and logging of documentation and creating reports; communicating information between RM Mechanical company and third party inspectors to coordinate gas and/or chemical pressure tests; and, inspecting high and low purity tube lines for quality craftsmanship.
ASME Section IX (BPE) B.31.1, B.31.2, B.31.3, D.1, D.2
Team Cooperheat MQS 2005
Aston, PA
The company provides NDT and Inspection Services. As an inspector, I provided day-to-day testing and inspection on piping in oil refineries (specifically Sunoco). NDT processes :
- Ultrasonic testing
- Penetrant testing
- X-ray testing
- Visual testing
- Magnetic particle testing
Code/Standards : ASNT – TC-1A
Purity Systems, Inc. 2003-04
High Purity Piping Consultant Denver, CO &
Puerto Rico
Procedures, Inspections, Documentations
Pharmaceutical Industry –Abbott Laboratories, Amgen Pharmaceuticals
Duties : To borescope and visually inspect high purity tubing. Maintaining documentation for inspections, also performing material inspections, Isometric documentation examinations, sloping pipelines and taking readings for rough average (RA) on tubing surfaces, also taking numeric readings on tube thickness. All material was of stainless alloy.
Weld processes utilized 1) orbital tube welding (GTAW-automatic) and 2) manual welding (GTAW)
Standards & Codes : ASME B31.3 Process piping code
ASME Boiler and pressure vessel code (Section IX)
ASME Pressure piping, B31
Raytheon Polar Services - Denver, Colorado 2002-2003
Welding Inspector Antarctica
Construction of Wastewater Treatment Plant
EDUCATION
Welding Certifications 1977
Airco Tech for Welding Philadelphia, PA
Welding Technology
American Welding Society 2009-2012
Certified Associate Welding Inspector Denver, CO
ASNT SNT-TC-1A – NDT LEVEL II INSPECTOR (VT
Training and Accomplishments
Service Award for United States Antarctic Program
Construction Safety and Health Training (Most-OSHA 10 Hr. Course)
40 Hour Hazardous Waste Operations (Nuclear Clearance Training)
Awarded Medal From Secretary of Defense for Antarctic Program
Eastern Seaboard Diving Academy (Underwater Diver Mechanic)
June 15, 2000
To Whom it May Concern :
This is a letter of recommendation for Mr. Dorian Smithey. Mr. Smithey worked for
Tradesource/JBM, Inc. on a recent million-dollar shut down in Jesup, Georgia at the
Rayonier Jesup Mill as a supervisor. During this time Mr. Smithey supervised and
managed approximately 20 welders and a crew of helpers.
In working with Mr. Smithey, I have developed the utmost respect and confidence in his ability as a shift supervisor, and was highly impressed with his abilities and knowledge in the welding field.
Mr. Smithey is an all-around top quality person and many times during this crucial shut down exhibited strong skills in managing workers and also in performing the work himself under extremely trying circumstances. Mr. Smithey’s concern for the welfare of his personnel which he was supervising as to safety and taking care of the personnel in general has very much impressed me and our client, JBM.
Any company would be lucky to have Dorian on their team and we would further recommend him highly for any position in which he would apply.
Sincerely,
Charlotte Ericson
Account Manager
Georgia District
Tradesource, Inc.
4390 Pleasant Hill Road, Suite F
Duluth, GA 30096

October 22, 2002
To Whom It May Concern :
This letter is in regard to Mr. Dorian Smithey and his employment with Antarctic Support Associates from 1998 though 2000.
I worked with Mr. Smithey for two seasons with the now Defunct Antarctic Support Associates (ASA). From October 98 thru February 99 Mr. Smithey was employed as a certified Pipefitter and welder with ASA. During the season of October 99 thru February 2000, Mr. Smithey was hired as a Sr. Construction Coordinator and oversaw the construction of two 2.2 million gallon fuel tanks at McMurdo station. In the capacity of Sr.. Construction Coorinator, Mr. Smithey acted both as welding inspector, overseeing the work of subcontract welders, and as a project manager for this construction project.
Antarctic Support Associates (ASA), had the contract with the National Science Foundation from 1990 to 2000 to perform all contract work in Antarctica for the United States Antarctic Program (USAP). Raytheon Polar Services Co won the contract in 2000 and is now the primary contractor for the National Science Foundation in the USAP. Antarctic Support Associates dissolved as a company after loosing this contact. Many of the employees transferred to the new company, but the company itself is not the same legal entity now.
Should there be any questions about Mr. Smitheys employment with Antarctic Support Associates, please feel free to contact me at anytime.
Sincerely,
Brad Hasley
brad.hasley AT usap.gov .
06 February 2003
MEMORANDUM FOR RAYTHEON POLAR SERVICE
Mr. Fred Cunnigham
FEMC Manager
FROM : MAJOR PAUL DALLEMAGNE
MAJOR SAMANTHA OLSZOWY
109 Expeditionary Airlift Squadron
McMurdo Station, Antarctica
SUBJECT : Outstanding Performance
1. We would like to commend the performance of Dorian Smithey. His efforts have made a significant contribution to our morale and welfare during the later part of this season.
2. Over a period of approximately three weeks, Mr. Smithey donated his free time to teach the two of us basic welding techniques. His efforts have resulted in a very rewarding experience for us. As an excellent instructor, he has given us the basic knowledge required to repair various farm implements and household construction itcms.
3. We would like to pass on the sincere praise I for a job well done.