Saudi Designers Eng Saudi Arabia : HVAC, Fire Fighting Plumping Utility Design Engineer

[mskavi]

Saudi Designers Eng Saudi Arabia : Utility Design Engineer ( HVAC, Fire Fighting and Plumping)
Website: www.sdecj.com

Keywords: HVAC, Fire Fighting, Plumping, Utility Design Engineer, design engineer, engineering design

Designation: Utility Design Engineer ( HVAC, Fire Fighting and Plumping)
Experience: 5 - 10 Years
Location: Saudi Arabia
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 22 Jul 2009

Job Description:

1. Graduate Mechanical Engineer with 5 years design experience
2. Design experience in the field of HVAC, Fire Fighting and Plumping
3. Experience in Elite or equivalent programs
4. Thorough Knowledge of ASHRAE/Euro standards, NFPA and International Plumping Code
5. Responsible from basic engineering to detailed design/Engineering
6. Coordination with other disciplines for interrelated engineering decisions and BOQ preparation.
7. Knowledge of Autocad with self drafting will be an added advantage.
8. Air conditioning design involving condensing units, FCUs, ducts, grills and associated copper piping
9. Firefighting network involving fire sprinklers, Fire Hose cabinet , Fire pumps and alarm check valves
10. Plumbing activities involving water supply piping, water tanks, transfer and booster pumps, internal and external drainage works.


Desired Candidate Profile:

1. Graduate Mechanical Engineer with 5 years design experience
2. Design experience in the field of HVAC, Fire Fighting and Plumping
3. Experience in Elite or equivalent programs
4. Thorough Knowledge of ASHRAE/Euro standards, NFPA and International Plumping Code
5. Responsible from basic engineering to detailed design/Engineering
6. Coordination with other disciplines for interrelated engineering decisions and BOQ preparation.
7. Knowledge of Autocad with self drafting will be an added advantage.
8. Air conditioning design involving condensing units, FCUs, ducts, grills and associated copper piping
9. Firefighting network involving fire sprinklers, Fire Hose cabinet , Fire pumps and alarm check valves
10. Plumbing activities involving water supply piping, water tanks, transfer and booster pumps, internal and external drainage works.



Company Profile:
Saudi Designers Engineering Consultants (SDEC) was established in 1983 to provide general engineering services. Today, Saudi Designers Engineering Consultants stands as one of the leading Engineering Consultants in the Kingdom of Saudi Arabia and also has presence in the Gulf Region.
Saudi Designers Engineering Consultants has successfully completed the design engineering services and construction management of numerous large and prestigious projects for various type of clientele ranging from the SABIC Industries, secondary industries and numerous other industrial, commercial and supervision projects

Executive Name: MSRK Reddy

Address:
Not Mentioned

Email Address: projects@sdecj.com

Telephone: Not Mentioned

Keywords: HVAC, Fire Fighting, Plumping, Utility Design Engineer, design engineer, engineering design

[MOHAMMED ASHWID]

CURRICULUM VITAE

MOHAMMED ASHVID

Mobile:+919980954074
E-mail; mohammedashwid AT yahoo.com

PERMANENT ADRESS
MOHAMMED ASHVID,S/O ABUBAKKAR.B,
KELAGINA MANE,NEAR KUKKADY
BAIKAMPADY
MANGALORE-575011

Objective
To seek an excellent career in your organization by doing my best and to put in my sincere efforts while working for your esteemed organization also to seek a prosperous career in the field of Tool Making and CAD, having a good exposure in Automotive Tool engineering with the application of CAD tools like AUTO CAD CATIA V5 and UNIGRAPHICS NX 4.
Work experience
- Worked as TRAINEE TOOL MAKER in “NYPRO FORBES MOULDS PVT.LTD” HOSUR from May 2007 to May 2008.
- Worked as a “TOOL ENGINEER” in “DEL Q SOLUTIONS” BANGALORE,
From May 2008 to Till Date..
Personal strength
- Proficiency in manufacturing of Injection moulds.
- Proficiency in creation of various types of 3D models.
- Proficiency in creation of Manufacturing Drawings.
- Knowledge in GD&T Methods.
- Expertise in usage of CAD software AUTO-CAD, CATIA V5, UNIGRAPHICS

Responsibilities
- Lead a team of engineers and train them.
- Played role as Tool engineer.
- Involved in Tool Designing.
- Designing of models related to molds.
- Model checking.
- Involved in Process planning & Electrode design.
- Passing details to CNC programming section.
- Complete follow up of the mould from raw-material stage to dispatch stage.
- Involved in Troubleshooting of Injection molds.
- Involved in component inspection and counter attacking the critical points.
- Involved in maintaining Standards and quality in tooling.

Education
Qualification
School/College
Year of Passing
Percentage
Obtained
Diploma in Tool and Die Making Govt. Tool room And Training Center, MANGALORE May 2008 72%

AUTO CAD 2004 and
2007
(CAD SOFTWARE) TCSI
HOSUR JUNE 2008
FIRST CLASS

CATIA And
UNIGRAPHICSNX4
(CAD/cam software’s) MSM CAD INSTITUTE
BANGALORE 2009
FIRST CLASS

SSLC
B.R.H.S ENGLISH MEDIUM SCHOOL, BAIKAMPADY, MANGALORE March 2004 63%

Project Details
Component Client Duration Complications
1.Ordnung Box AUDI (Augen) 5 Weeks Block Ejector
2Cap GSK Automation 6 weeks Gear ejection
3.Outer lens IJL 4 weeks Side core with angular movement
4End Cap FESTO 4 weeks Two cavity with thread ejection
5.Upper and lower shell Synergetic 3 weeks Valve pin, Hydraulic cavity pin

Similarly some more Projects have been handled at time…
Technical skills
GROUP Software Tools/Technologies
Office Suites: MS Office.
Operating Systems: MS Windows 2000 & XP.
Application software’s: Auto cad 2004, CATIA V5, Unigraphics NX4
Designing: Product design/development.

Personal Details
Name : Mohammed Ashvid
Date of Birth : 28.10.1988
Sex : male
Nationality : Indian
Religion : Muslim
Marital status : Single

Declaration
I here by declare that the above-mentioned information is correct up to my knowledge and I bear the responsible for the correctness of the above-mentioned particulars.

PLACE: BANGALORE
DATE:

Mohammed Ashvid

[Guest]

Curriculum Vitae
N.RAFI BASHA
e-mail : basha.chennai AT gmail.com

Objective - Exploring The Field To Which I Belong.
- Excellent communication skills and proven leadership qualities.
- Out-standing problem solving, data collection and decision making skills.
- Ability to absorb technical knowledge quickly.
- Ability to work in a team environment, emphasizing team goals over personal goals
EDUCATIONAL QUALIFICATION
From To School/
College Degree
Awarded Aggregate
%
August 2005 May 2009 C.ABDUL HAKEEM COLLEGE OF ENGG&TECH in VELLORE.
B.E {MECH}

72

June 2004 March 2005 S.R.K.M.Hr. Sec School. Chennai. Higher Secondary 68.75
June 2002 March 2003 SRI.V.BATCHA REDDY HS. Chennai State Board 82.2
Computer Skills
MECHANICAL SOFTWARE
1.
2.
3. AUTOCAD
MS Excel
MS Office
EXPERIENCE
Total Experience : 1.5 Year in MEP
1. Company Name : GEMINI COOLING SYSTEM PROJECTS PVT LTD
Position : Design and Estimation Engineer (HVAC)
Duration : From May 2010 to Till Date
Reporting To : Design and Estimation Engineer

- Primary duties include selection of equipments duct and Grill Sizing, detail design engineering of HVAC system involving heat load calculation, and preparation of drawing and specification.
- Acted as mediator between engineering, maintenance and outside contractors.
- Designed the flow drawings and prepared the layouts.
- Identified of HVAC equipments required for the project and the size of these equipments.
- Documented the process and ensured that all the documents were maintained.
- Scheduled the timeline of project and prepared the estimated budget for the same.
- Reviewing Tender documents, Specifications, Basis of Design and drawings and determine the scope of work and required contents for estimate.
- Interpreting & reviewing system drawings to identify any difference to tender requirements and raise queries against specification.
- Preparing tender queries to consultants/clients to confirm and collect any missing data including; performance & defect liability bonds, contract conditions and clauses etc. and any special regional requirements.
- Preparing material take off using tender drawings.
- Sending enquires to supplier & sub-contractor and analysis the quotation technically and commercially.
- Organizing meetings with suppliers & sub-contractors to obtain competitive quotes.
- Reviewing and generating Bill of Quantity against system drawings to ensure alignment and to identify materials types & quantities and prepare equipment lists and rough drawings for cost estimation
- Downloading Tender Document
2. Company Name : ELMECH ENGINEERING AND CONTRACTING PVT LTD
Position : SITE ENGINEER
Duration : 6 Months
JOB PROFILE :
- Manages field operations and site productivity, ensures efficient and
Sufficient utilization of manpower & equipment.
- Attends weekly/monthly construction meetings as required and
implements systems/plans to effectively respond to client complaints.
- Ensure that site safety programs are followed and strictly observed.
- Closely abide by the weekly or monthly schedule to meet and attain progress by monitoring materials and tools availability.
- Prepares tools, materials & manpower forecast to sustain progress.
- Closely monitor contractors manpower level in relation to progress to meet volume of activity since this is a fast track project
- Arranging and controlling labor, machinery & materials for daily works. Closely monitor contractors manpower level in relation to progress to meet volume of activity since this is a fast track project.
- Installation ,Testing &commissioning
- Quantity Survey
- All paper Works

[Guest]

STEEVAN PRADEEP SEQUEIRA
steevan.p AT gmail.com

SECURITY SOLUTIONS EXPERT
Seeking challenging senior level assignments across Security Solutions Sector

PROFILE
- Competent professional offering more than 5.5 years of considerable exposure to Security systems. Currently serving Globe Detectives Pvt. Ltd, Bangalore as a Dept. Manager (recently
- Qualified Diploma in Electronics & Communications Engineering from R.N.S Polytechnic Murdeshwara.
(Approved By Board Technical Education and A.I.C.T.E Technical Board Delhi)
- A proactive planner with dexterity in identifying & adopting emerging trends to achieve organizational objectives & profitability norms through strategic positioning.
- Integration of BMS System with Fire Alarm System
- Key expertise areas include Installations of Fire Alarm system, Software for Security Systems, CCTV & DVR card installations, Project designing, etc.
- Kept abreast with the latest updates and technology around Security Systems and evolving global best practices with excellent communication, relationship management and analytical skills.
- Backed with extensive experience in Security Alarm Systems and Troubleshooting of Security Systems.
- Technical proficiency in Auto Cadd 2008, MS Office, Doing Computer Networking CCNA
Core Competencies
- CCTV System (IP Camera and DVR Programming)
- F.M. 200 Co2 Flooding Systems
- Sprinkler System
- Software Installations - Public Address System - Sprinkler System
- Multi door, Network able access - Fire Alarm System (SIMENS, Morelay, Secutrone, Mercom, GE, &Cooper) All Types of Addressable Fire Alarm)


PROFESSIONAL EXPERIENCE
GLOBE DETECTIVES PVT LTD, Bangalore since 17 Jan 2006
Service Engineer – Security Alarm Systems
- Interacting with the clients to understand their requirements and suggesting them the products as per their needs.
- Expertise in handling Security system troubleshooting and configurations, Installation of security software Project handling and providing technical assistance via Internet and telephone.
- Managing customer centric operations so as to achieve customer satisfaction, by approaching with the customer’s queries to the concerned department.
- Also maintaining good relations with the corporate clients by resolving their queries and looking forward for their needs resulting in expansion of business.
- Worked for major clients like
- ITC Info Tech Park, Bangalore ------------------------- 32 Chanel, A.V. Tech Make DVR
- Hotel Marine Plaza, Five Star Hotel Mumbai ------ 32 Chanel, Hik- Vision DVR & IP Camera
- Bharath Electronics Ltd, Bangalore-------------------- CO_2 Flooding Integrated With Fire Alarm
- Aircel Pvt. Ltd, (BPO Office All Over India)-------- IBMS Intigtion(CCTV, Fire Alarm, PA System,Access )
- ISRO, Bangalore All Over in Bangalore---------- Public Address System, Addressable Fire Alarm System.)
- Cochin International Airport---------------------------- SIMENS (MXL Panel) Fire Alarm System. Integrating with BAC Net System
- PPassport Office Vishak Patna(Andra)-------------- SIMENS BT-800
- CPWD Bangalore----------------------------------------- BOSCH Fire Alarm System.
SECURE ALL INTEGRATED SYSTEM (SIS), Bangalore 15 July 2005 - 20 Dec 2005
Service Engineer

- Working on Security systems, their configuration and troubleshooting.
- Interacting with the clients to understand their requirements and suggesting them the products as per their needs.

EDUCATIONAL CREDENTIALS
Diploma in Electronics & Communication Engineering, 2002 - 2005
R.N.S Polytechnic Murdeshwara.
CCNA Net Working Trained.

[bablu51503]

RESUME

Post Applied for HVAC Site Engineer

MD HISABUDDIN ANSARI
Email:-bablu51503@gmail.com


Career objective:-
To perform my work with very responsibility and honestly under the superior guidance, and always ready to perform challenging work.

Education Qualification
Six months Advance diploma course in Air conditioning & refrigeration from ISHRAE EDUCATION&RESEARCH FOUNDATION, New Delhi

Professional Qualification
B.E. (2005-2009) Mechanical Engineering from Rajiv Gandhi Technical University of Madhya Pradesh with 68.41% aggregate

Work Experience
· 2.4-year of working experience with MODERN AIRCONDITIONING COMPANY (PVT) LTD. As a Site Egg.

Projects

[LIST][*]Spar Hypermarket India Pvt. Ltd., Gurgaon(HR)[*]S R INFRA Concepts Pvt. Ltd., Gurgaon(HR)[*]Renovation of Oberoi Hotel, Udaipur(Rajasthan)[*]The Bristol Hotel, Gurgaon (HR)[*]Ducting of Haldiram at Centre Stage mall, Noida(U.P.)[/LIST]

Paper Presentation


[LIST][*]SPACE ELEVATOR[/LIST]

Project undertaken

[LIST][*]Automatic Side Stand & Mobile Charging System[*]Welding Robot[/LIST]

Achievements
· National Level Paper Presentation Winner
· National Level Project Competition Winner

[Thelha444@gmail.com]

I am muhammed thelha from india.iam a mechanical engineer diploma holder and additional qualification in oilfield engg and qa/qc and NDT ASNT Level II. Familar with ASME,API,ASTM Standards.I would like to join your company if any vacancies there please inform me.

[Guest]

MD SHAHNAWAZ ASHRAF
e-mail; ershahnawaz.ashraf AT gmail.com
OBJECTIVE :
To obtain a position where I can use my technical skills as well as contribute towards learning and improvement process throughout.
EDUCATION :
- B-Tech in Mechanical Engineering in 2011 with 62.7% from AMU (Aligarh Muslim University).
- Diploma in Mechanical Engineering in 2006 with 72.3% from AMU (Aligarh Muslim University).
- High school in 2003 with 71.7% from BSEB.
PROJECTS UNDERTAKEN :
- B Tech Project – Off design performance of an axial flow compressor using half vortex
- Diploma Engineering (Final Year) Project – Manufacturing & Design of Mechanical Power Press.
TECHNICAL SKILLS :
- HVAC SOFTWARE- HAP, DUCT SIZE 5.0 (McQuay), DUCTU, BETA PEROFORMANCE DATA PROGRAME
- Basics of Auto CAD
- Basics of PRIMAVERA
- Basic Knowledge of MS Office
ACHIEVEMENTS :
- Award in speech on “Should young youth join in politics” by P. T. Education, Aligarh.
STRENGTHS :
- Honest with my work, a caring, loving and soft-spoken person.
- Hard working and accomplishing challenging tasks.
- Leadership and Interpersonal skills- Ability to manage time and people.
- Positive Attitude
- Willingness to learn

DECLARATION

I hereby declare that the information furnished is correct to my knowledge.
Date : (MD SHAHNAWAZ ASHRAF)