www.irmome.com IRM OFFSHORE AND MARINE ENGINEERS LTD Ahmedabad : Offshore Fabricator, Techno commercial Proposal Engineer

[mskavi]

IRM OFFSHORE AND MARINE ENGINEERS PVT. LTD Ahmedabad : Sr. Engineer ( Marketing and Proposals)
Website: http://www.irmome.com

Keywords: Marketing of Capital Eqipments for Ports, Harbours and Offshore Fabricators. Preparing technical proposals, Quotations, preparing marketing reports, technical presentation for domestic and International Market.

Designation: Sr. Engineer ( Marketing and Proposals)
Experience: 3 - 8 Years
Location: Ahmedabad
Compensation:
Rupees 1,50,000 - 2,50,000
Education:
UG - B.Tech/B.E. - Mechanical, Production/Industrial
PG - M.Tech - Any Specialization, Mechanical, Production/Industrial,MBA/PGDM - International Business, Marketing
Industry Type: Industrial Products/Heavy Machinery
Functional Area: Marketing, Advertising, MR, PR
Posted Date: 16 Jul 2009

Job Description:
Marketing of Capital Eqipments for Ports, Harbours and Offshore Fabricators. Preparing technical proposals, Quotations, preparing marketing reports, technical presentation for Domestic and International Market.

Desired Candidate Profile:
He/She should be 3 years experience of preparing Techno commercial Proposal/ offers. He/ She should be energetic with pleasing personality & should be travel sometimes. He/she should have good written & oral communication skill.

Company Profile:
IRM Offshore & Marine Engineers Pvt. Ltd. - Ahmedabad is an ISO 9001:2000 rubber engineering company having 40 years of purposeful existence in offshore, marine and port sector having Rs. 120 Millions turnover with increasing export share.

Executive Name: Mr. Hiren Kareliya

Address:
2nd Floor, Agrawal Avenue , Opp- Navarangpura
Telephone Exchange, C.G. Road
AHMEDABAD,Gujarat,India 380006

Email Address: hrd2@irmome.com

Telephone: 91-79-26406664

Keywords: Marketing of Capital Eqipments for Ports, Harbours and Offshore Fabricators. Preparing technical proposals, Quotations, preparing marketing reports, technical presentation for domestic and International Market.

[Guest-IJT]

rudresh korgaonkar
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
rudresh.coolguy AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
owner representative HULL SUPERVISOR
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
RESUME

OBJECTIVE :

To pursue a challenging career and be part of a progressive organization that gives scope to enhance my knowledge, skills and reach the pinnacle in this field with sheer determination, dedication and hard work.
PERSONAL SKILLS :
Comprehensive problem solving abilities, Ability to deal with people diplomatically, willingness to learn, Team facilitator, Ability to work with and understand my team members.

Preferable location : - As required.
EDUCATIONAL QUALIFICATION :

Degree/ Certificate/ Board/ University Institution Year of Passing
S.S.C GOA Board St. Xavier High School,Goa 2001
HSSC GOA Board ST.THOMAS HIGHER SECONDARY Diploma in Shipbuilding Engineering GOA Board Of Technical Education Institute of Shipbuilding Technology – GOA (ISBT) 2008
AREA OF INTERESTS :

- New Shipbuilding
- Hull, Outfitting, Piping supervision.
- Machinery installation and test.
- Conversion and repair work supervision
- Quality Control
- Production Supervision in Hull, Outfitting and Piping.
- Block inspection & Erection of Blocks.
- Hatch covers production & installation.
Academic qualification
Diploma in Shipbuilding Engineering.
o Professional qualification
- Well acquainted with computers in generating & maintaining any sort of document or reports using : -
MS OFFICE, AUTOCAD, and PHOTOSHOP.
- Completed training programme in “Basic Electrical for Mechanical Engineering
(MECHATRONICS) course for six week ‘.
- COMPLETED NON-DESTRUCTIVE TESTING (N D T) CORSES in LEVEL –II.
Under American society for non destructive testing (ASNT-LEVEL II)
1. Visual Inspection ( VI )
2. Penetration Test ( P T )
3. Magnetic Particle Test ( M T )
4. Radio graphic Test ( R T )
5. Ultra sound Test. ( U T ).
Organisational Experience
Present job :-
- MARUTI OWNERS PVT LTD (SINGAPORE)
(1st may 2010 TO TILL DATE : - IN CHINA
Owner representative (HULL SUPERVISOR)
Presently engaged in Hull, Outfitting, & Pipe supervision for the construction of 57,000 DWT bulk cargo carriers ship, in Yangzhou Guoyu shipyard Jiangsu province CHINA. Supervision on site, this includes the supervision of construction and outfitting work and attendance at inspections and tests of structure, machinery, equipments and systems.
- FIDERE MARINE PVT LTD (INDIA) 27th Aug 2009 till April 2010 - IN CHINA
Owner representative (Hull supervisor)
Engaged in Hull, Outfitting and Pipe supervision of new construction of bulk carrier (handy max) ships in CHINA.
- CHOWGULE & COMPANY PVT LTD, shipbuilding division group GOA - IN INDIA
01 AUG 08 -20 AUG 2009
Officer.
1.Engaged in new construction of General cargo ships for the European continent namely; Germany, Netherlands, United Kingdom.
2.Engineered and supervised the Construction of hull, Hatch cover systems on Multipurpose vessels,
3.Preparing project schedule, co –ordination with various clients & contractors for smooth sequential and timely finish the product before ship is ready.
4.Follow of Work activities at the work shop and on board with contractors.
5.Follow with planning department for preparation of welding procedure Specification (WPS), Establishing Procedure Qualification Records (PQR), Conducting Welder qualification Test (WQT) as per Class requirements.
6.Assisting surveyors and owner representative for clearance of block inspection. Assisting surveyors and owner representative for clearance of block inspection.
7.Assisting HEMPEL AND EXCEL COATING supervisor and owner representative for clearance of block painting inspection.
- West cost shipyard (P) Ltd. GOA- IN INDIA
1. Engineered and supervised the repairs of hull, outfitting, machinery, stern, steering and piping jobs of on various inland vessels (Barges, Ferries, and Launches).
2. Performing Inspection of welding onboard, before and after welding.
3. Assisting surveyors for inspection such as hull welding inspection, Docking, Undocking, tail shaft survey, Final surveys, annual surveys, Etc.
4. Carrying out trials and tests like Inclining experiments, Trials of Main engine, and various machineries, stern and steering,. Maintain schedule, daily report, joint measurement reports, work done certificate.
5. Preparing project schedule, making estimates, scrutinizing contractor and vendor bills for repair job.
WORK EXPERIENCE DURING STUDY :

- Attended training in 5th Semester at ATREYA ENG. WORKS GOA INDIA For six months.
- Attended training in 7th Semester at WESTERN INDIA SHIPYARD LTD, GOA INDIA for six months.

PROJECT STUDY #
- Design and working module of controllable pitch propeller ( CPP )
Declaration :-
I here declare that all the information above mention is true and best of my knowledge, incase any certificate need for assurance I will submit during my interview course.
Rudresh m. korgaonkar
RUDRESH KORGAONKAR
EMAIL ID: - Rudresh.coolguy AT gmail.com
Rudraksh_korgaonkar AT yahoo.com
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4125352
Date & Time : 13th May 2011 4:27 AM (UTC)
IP Address : 58.220.224.174
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.65 Safari/534.24
Predicted Country : China

[Guest]

RENJITH THOMAS
Email : renjithomas1986 AT gmail.com
CAREER OBJECTIVE
To excel in the field of Engineering and to associate with a firm that gives ample
opportunities for individual as well as organisational growth.
EDUCATIONAL QUALIFICATION
- Completed 1 year Graduate Marine Engineering training from Marine Engineering Training Institute,Cochin Shipyard Limited in January 2009.
- B. Tech in Mechanical Engineering (2003-’07),MG University from SCMS
School of Engineering and Technology,Ernakulam with 64%.
- Passed All India Senior School Certificate Examination with 75.8% from
Bhavan’s Vidya Mandir Eroor,Kochi in 2003.
- Passed All India Secondary School Examination with 90.8% from
Bhavan’s Vidya Mandir Eroor,Kochi in 2001.
- Secured A1 grade in all subjects in AISSE held by CBSE in March 2001.
- School topper in Malayalam in AISSE March 2001.

ACHIEVEMENTS
- Won prizes in competitions like Dance,Quiz,Mimicry,Cacophony,Short story,
Poetry writing at various inter and intra school and college competitions.
- Was an active member of school cricket and football teams.
KEY SKILLS
- Certified in AutoCAD from CADD Centre,Ernakulam.
- Programming Language-C,C++
- Certified in Java Programming with JDK 1.2 from NIIT in 2001.
WORK EXPERIENCE
- Worked as an Engineering apprentice in Cochin Shipyard for a period from 17 November to 30December 2007
- Worked as a Junior Engineer for Anglo Eastern Ship Management Ltd.,Hong Kong,in FG M.V.Kirti from 2 May 2009-19 February 2010.
- Worked as a Fourth Engineer for Anglo Eastern Ship Management Ltd.,Hong Kong,in FG M.V.Prosperous from 20 April 2011-21 September 2011.


WORK PROFILE AS A JUNIOR ENGINEER
- As FIRST ASSISTANT to the senior in full charge on regular watch on
Main Engines and Boilers simultaneously.
- MAIN ENGINE-UBE B&W 6L60MC,MCR :9900BHP AT 95 RPM.
- AUX.ENGINE(2 NOS)YANMAR M200-LET 460KW AT 720 RPM
- SHAFT GENERATOR UBE,SPH 250 CS,400KW AUXILLARY
- BOILER NISHIDA,VERTICAL COMPOSITE WATER TUBE,
WORKING PRESSURE 7 BAR.
WORK PROFILE AS A FOURTH ENGINEER
- As SENIOR in full charge on regular watch on Main Engines and boilers simultaneously.
- MAIN ENGINE-HYUNDAI MAN B&W 6S70MC-C8,
MCR-18660KW AT 91RPM.
- AUX.ENGINE (3 NOS)YANMAR 6EY 18 (A)LW,
RATING OF 730 KW AT 900RPM
- BOILER-KANGRIM MARINE COMPOSITE,TYPE -MC0904P15,
WORKING PRESSURE 6 BAR.
CERTIFICATES POSSESSSED
ALL STCW 95 CERTIFICATES-ELEMENTARY FIRST AID,FIRE PREVENTION AND FIRE FIGHTINGADVANCED FIRE FIGHTING,MEDICAL FIRST AID,PROFICIENCY IN SURVIVAL CRAFT AND RESCUE BOATS OTHER THAN FAST RESCUE BOATS,PERSONAL SAFETY AND SOCIAL RESPONSIBILITIES,PERSONAL SURVIVAL TECHNIQUES.
TRAINING ATTENDED
- 3 DAYS TRAINING IN ENGINE ROOM SIMULATOR(OPERATIONAL LEVEL) AT ANGLO EASTERN MARITIME TRAINING CENTE,MUMBAI
- 6 DAYS SKILL ENHANCEMENT PROGRAMME FOR JUNIOR ENGINEERS AT ANGLO EASTERN MARITIME TRAINING CENTRE,MUMBAI
- 6 DAYS MACHINERY MAINTENANCE SKILL ENHANCEMENT PROGRAMME-MODULE 2 AT ANGLO EASTERN MARITIME TRAINING CENTE,MUMBAI.
- 3 DAYS TRAINING IN BRIDGE MANOEUVRING AND ENGINE CONTROL(OPERATIONAL LEVEL) AT ANGLO EASTERN MARITIME TRAINING CENTE,MUMBAI.

[Guest]

SANDEEP BHOSLE
E-mail – sandeepbhosle AT hotmail.com
______________________________________________________________________________
Attention : Human Resources
With over fourteen years of experience in working on OFF-SHORE oil rigs, I have gained substantial knowledge as a Driller, & Assistant Driller. These skills would contribute positively towards the safety & efficiency of an OFF-SHORE company such as yours. Please accept this letter & my enclosed resume as an application to become a member of your team.
During my work experience, I have progressed through the rank of a lease-hand to the position of a Driller. This has provided me with valuable training in most areas of OFF-SHORE drilling & rigging operations. I have performed extended radius (ERD) & short radius (SRD) drilling operations; installed & dismantled wellheads, run casings; reworked wells; operated blowout/annular preventers (BOP) & repaired & maintained a variety of rig equipment & pumping systems. In addition, I am continually upgrading my knowledge & skills through courses & on-the-job trainings provided by organizations that are highly recognized within the oil industry including, IWCF Course-Drillers Level-(Oct, 2011) AT Well Control School, IDT, ONGC- DEHRADUN. Also Well Control training in Singapore, (six times).
My work standard is a very high caliber & I have been awarded for outstanding performance in areas of operations & safety. I am very resourceful individual with excellent decision making skills, a positive & result-oriented approach to solving problems, as well as excellent work ethics. You will find that my personal attributes & work experience, when combined, make me valuable to an OFF-SHORE operation. I am also willing to relocate in order to serve your company. As a member of your team, I would bring a positive & dedicated teamwork attitude.
It would be a pleasure to meet with you to discuss your requirements & to explore employment opportunity as a DRILLER/TRAINEE DRILLER/ASSISTANT DRILLER, within your organization. I can be reached by cell phone, landline, or e-mail AT the numbers listed above.
Thank you for your time & consideration.

WORK EXPERIENCE
UNEMPLOYED - INDIA Sep 2011 – Present
- Completed IWCF Course – Drillers level, on Oct 2011 with 90% marks, AT Well Control School, IDT, ONGC, DEHRADUN, INDIA
SELF EMPLOYED IN IT SECTOR – CANADA Dec 2009 – Aug 2011
Hardware & Software Technician,(Laptop/Pc Repair Services)
- Wholesale buying of used, lease return, broken, damaged, IT equipments, from IT manufacturers, recycling companies, whole sellers, private individuals, etc.
- Individually selling IT equipments, after repair & refurbish in flea market stores / from home, for considerable amount of profit,
- Provide in house IT product repair services, networking setup services, within greater TORONTO area.
- Provide Hardware / Software repair services within TORONTO region
COPPER CORE ENGINEERING & MANUFACTURING
INC–CANADA Feb 2005–Dec 2009
Assembly Technician
- Performed highly complex machinery assembly using mechanical drawings & 3D Blueprints.
- Perform hydraulic, pneumatic, & electrical testing on assembled machinery.
- Performed preventive maintenance on robotics and automation equipment.
- Performed installation and dismantle of exhibit components & secondary equipments.
- Reduced operating costs by implementing improved assembly and test methods.
- Made recommendations for new or improved equipment to engineering department.
- Maintain hourly record of production, machinery, testing, warehouse shipping / receiving, logbook, etc
AKRYL INDUSTRIES INC – CANADA May 1999 – Dec 2004
Setup Technician / Shift Supervisor (Injection Molding)
- Perform computerized setup & operation of plastic injection molding machines, maintain accurate & timely production as per orders.
- Perform setup of auxiliary equipments, secondary operations, production work cell etc.
- Troubleshoot & fix injection molding machines, auxiliary & secondary equipments, to resume production.
- Perform equipment maintenance / basic repair / organize tools & equipments, etc.
- Supervise nightshift for work productivity / teamwork, & maintain clean communication within employees.
- Maintain daily record of production, machines, maintenance, employees, etc
SEDCO FOREX INTERNATIONAL DRILLING COMPANY - INDIA Oct 1994 – Feb 1999
Driller – Offshore Oil Rig : Trident II
- Drill oil & gas wells, Directed rig crew to ensure efficient and timely operations and equipment maintenance
- Considered factors such as the type of formation, presence of high pressure areas, mud weight and unstable formation zones; and plan work activities accordingly
- Set-up and operated equipment for drilling operations to install wells for extraction of oil from established locations along the ocean floor
- Ensured that equipment and rig on platform were properly set-up to meet the parameters and direction of drilling required for the wells
- Operated the controls of rig and service rig drilling and hoisting equipment
- Performed short radius (SRD), extended radius (ERD), exploration and development wells, drilling operations
- Removed casings and worked-over wells; cleaned and deepened wells as required to maintain production efficiency
- Installed wellheads and performed fishing (loss recovery), milling and casing operations (installed various types of casings)
- Maintained record of drilling (IADC Report) and servicing operations
- Circulate kicks-out to continue drilling operation
ARETHUSA ZAPATE OFF SHORE DRILLING COMPANY Nov 1985 - Oct 1994 Driller & Asst-Driller - Oil Rigs : 38 Bonito II & 37 Bonito I Nov 1991 - Oct 1994
- Performed the functions and duties of the driller throughout his vacation period
- Measured drill settings and prepared drilling tools
- Calculated all well control figures and organized work activities and equipment to expedite drilling operations
- Operated mud pumps and wellheads including hydraulic pumping systems to pump chemicals, gases, sand, cement and other materials into well
Derrickman - Oil Rig : 38 Bonito II May, 1990 – Nov 1991
- Aligned and manipulated sections of pipe and drill stem from the platform on the rig derrick during the removal and replacement of strings of pipe, drill stem and drill bit
- Operated and maintained drilling mud systems and pumps during drilling; also mixed chemicals and additives; recorded mud flows and volumes; also took samples
- Operated, repaired and maintained drilling rig diesel motors, transmissions and other mechanical equipment
- Assisted in installing and removing wellheads and run casings as well as taking down and transporting drilling rigs
Floorman - Oil Rig : 38 Bonito II Mar 1989 - May 1990
Roustabout - Oil Rig : 38 Bonito II Apr 1988 - Mar 1989
Roustabout - (Barge) SPIE - CAPAG Nov 1985 - Nov 1986
EDUCATION AND TRAINING
Well Control School, IDT, ONGC, DEHRADUN, INDIA Oct 2011 IWCF Course – Drillers Level
PETROLIUM INDUSTRY TRAINING SERVICES, NISKU, Alberta
H2S Alive Feb 2001
SEDCO FOREX TRAINING DEPARTMENT
Basic Well Control (Singapore) Feb 1995-1998
Introductory Module Feb 1995
Safety Module Dec 1994
DUPONT SAFETY COURSE/SEDCO FOREX INTERNATIONAL DRILLING COMPANY
Achievement Award for completion of Safety Training
Observation Program (STOP) Jul 1995
ZAPATA OFF SHORE COMPANY, SAFETY TRAINING DEPARTMENT
Derrickhand "A" On the-Job Training Certificate Jan 1992
Mudhand "A" On-the-job Training Certificate Jul 1991
Floorhand "A" On-the-Job Training Certificate Dec 1990
Roustabout "A" On-the-Job Training Certificate Feb 1989
Rig Based Fire Fighting Training On-the-Job Training Certificate May 1988
ENERGY INDUSTRIES TRAINING SERVICES PTE. LTD.
Surface Stack Well Control Certificates : Internationally
recognized courses (Singapore) 1994, 1993, 1992
BOMBAY UNIVERSITY
Bachelor of Commerce - Correspondence course (Grade 14 +)
R.V. TECHNICAL HIGH SCHOOL
High School Diploma
AWARDS AND RECOGNITIONS
- Letter of Recognition and logo watch gift, for five years without a lost time accident while working on Bonito II oil rig,
- Letter of Recognition and gift, for three years without a lost-time accident while working on Bonito II oil rig, 1991 -1994.
- Letter of Recognition and gift, for two years without a lost-time accident while working on bonito II oil rig, 1992 -1994
- Awarded Certificate of Appreciation and gift, for contributing towards the continuous growth of Arethusa/Zapata Offshore Company, April 1993
- Team recognition for excellence in safety - one year without a lost-time accident while working on the Bonito II oil rig, 1991
- Awarded Certificate of appreciation and gift, for contributing towards the continuous growth of Zapata Off Shore Company, April 1991

[Guest]

Respected sir,
I am Udhay completed my 4 years B.S.Marine Engineering course and sailed in crude oil tanker ship for 7 months.I am more willing to work offshore jobs in oil rigs. Here, i attached my resume. Due to my family situation,i want to join job immediately. So,please consider my application for any post and waiting for positive reply.Thank you..

CURRICULUM VITAE
R.UDHAYASHANKAR
Email;mariner.udhay AT gmail.com

OBJECTIVE :
Seeking a challenging position in a company with self motivated and resourceful competency. Thriving to prove communication, presentation and negotiation skills that can be used to attain the objectives of the company.

ACADEMIC CHRONICLE :
Qualification Institution Board /University Year of passing % Secured

B. S. MARINE ENGG Coimbatore marine college, Coimbatore VINAYAKA MISSIONS UNIVERSITY 2009 76
H.S.C Palaniammal Hr.sec.school, Pollachi. State board 2004 83
S.S.L.C Krishna vidhyalaya matriculation school, Pollachi. Matric board 2002 76
EXTRA QUALIFICATION :
¨ Basic knowledge in computer.

¨ Basic knowledge in English.
PERSONAL SKILLS :

¨ Driving car & bike.

¨ yoga

PAPERS AND WORKSHOPS :

¨ Participated in One Day Workshop on AUTOMOTIVE ELECTRONICS.

¨ VACATIONAL INPLANT TRAINING CERTIFICATE in Chennai Harbour.

PROJECTS AND THESIS :

TWO RAM HYDRAULIC STEERING GEAR – FINAL YEAR PROJECT.
STRENGTH :

¨ Positive Attitude

¨ Fast learner

¨ Communication skills
LANGUAGES KNOWN :

¨ To speak : Tamil, English, Hindi, and Telugu.
¨ To write : Tamil, English
¨ To Read : Tamil, English
DECLARATION :
I hereby declare the above mentioned information is correct up to my knowledge
and I bear the responsibility for the correctness of the above mentioned particulars.

YOURS TRULY

(R.UDHAYA SHANKAR)