Trimiti Engineering Solutions Pune : UNIGRAPHICS, CAD CAM Engineer

[mskavi]

Trimiti Engineering Solutions Pune : CAD / CAM Engineer

Designation: CAD / CAM Engineer
Experience: 1 - 3 Years
Location: Pune

Job Description:

Candidate will have to do drafting, 3 D modelling and / or Tool Path Generation for various toolings mentioned in the company profile as per project requirements. Also may have to monitor manufacturing activity if required

Desired Candidate Profile:

Candidate should be BE / DME in mechanical or production with good aptitude. Must have 1 to 2 years of experience of Designing and Tool path generation for Dies on Unigraphics CAD / CAM modules

Company Profile:
We at Trimiti are doing Design and Manufacturing of Tooling Viz: GDC & LPDC Dies, Press Tools Dies and PAtterns for sand casting for last 7 years for various automobile giants. We use UNIGRAPHICS, PRO/E and Delcam for Designing (CAD) and Tool Path Generation (CAM) activity.

Address:
Trimiti Engineering Solutions
Sahakar Ngar No. 1.
PUNE,Maharashtra,India 411009

Email Address: trimiti_placements@yahoo.in

Keywords: CAD / CAM Engineer

[Guest]

MYSELF Mr SANTOSH BANI

[Guest-IJT]

CURRICULUM VITAE
(DESIGN ENGINEER WITH PROFICIENCY IN PLASTIC WITH CAD TOOLS i.e. CATIA- V5. EXP: 2 YEARS 7 MONTHS)

PADMENDRA KUMAR
Design Engineer
Flat No.33, KumarParnakuti, Cell no. +91 9923559162
Yerwada-PUNE-06 Email-padmendra30 AT yahoo.com


OBJECTIVE:
To become an efficient design engineer with full of knowledge and skill, which make me valuable member in an organization where competitive environment encourages innovation, learning and creativity.

Experience:
Having 2 yrs.7 Months Of experience on Catia-V5 with Plastic Domain.

CURRENT – PROFILE:-

TATA AUTO COMP SYSTEM LTD
TECHNICAL CENTER- PUNE.
Complete Service providers (Tier 1 Supplier) for design, development of Automotive Interiors and Exteriors. Having a complete Design Engineering setup for Integrated Cockpit modules and Air vents.

Period : 2nd JAN 2008 to till date
Position : Project Engineer
Group : Interior Department

Roles and Responsibilities:

Designing & Development of Interior Plastic Components.
- Instrument Panel Assembly parts
- End Covers
- Finisher side
- Gap & Flush analysis of ‘A’ Surface with Instrument Panel Components.
- Part Design – Modeling and study for tooling Feasibilities.
- Isostatism – Designing Part locating scheme.

PROJECTS:-
- Design and Development of Cockpit for TATA Motors – SAFARI 18 Programs.
Technology support and knowledge transfer Tie up with TMETC -UK.

- Design and Development of Cockpit for TATA Motors – X2 CROSSOVER Program.

- Design and Development of Cockpit for TATA Motors – MICRO BUS Program.

PREVIOUS EXPERIENCE:-

CADTECH ENGINEERING SOLUTIONS PVT. LTD, PUNE.
This is ISO 9001 Marked Company which is concern with Engineering Services like Legacy Conversion, Reverse Engineering, CAD software training. Some valuable customers companies are TACO, John Deere, Bharat Forge, Tata Johnson Control, Bharat Forge, Tata Motors, Onwards, and East Collaborative etc.


Period : AUG 2006 to DEC 2007.
Position : Cad Engineer

Roles and Responsibilities:

- Planning of project process.
- Designing various products drawing in detail.
- Solid modeling, surfacing, assembling & detailing.

PROJECTS:-
- Project handled 3D modeling of BATTERY TRAY for
Tata motors Ltd. Pune
- Project handled 3D modeling of PLASTIC CAP for
Tata Auto Comp Ltd, Pune

EDUCATIONAL QUALIFICATION:
- Post Diploma in Plastic mould Design (2005-2006) from CIPET (Central Institute of Plastic Engineering Technology) BHOPAL WITH 75%.
- Diploma in Plastic mould Design (2002-2005) with from CIPET (Central Institute of Plastic Engineering Technology) BHOPAL WITH 72%.
- High School IN 2002 WITH 50.2% FROM CBSE D.A.V PUBLIC SCHOOL.

PERSONAL DETAILS:-

NAME : PADMEDNRA KUMAR
MARITAL STATUS : Single
LANGUAGES KNOWN : English, Hindi.
Nationality : Indian
Date of Birth : 30.11.1985
Address : MQ-93, Dipka Colony, Gevra Project
Dist-Korba (C.G)

DECLARATION:
I do hereby declare that the above statements are true to the best of my knowledge
And belief.

PLACE: Pune.

DATE: / / 2009

Yours sincerely

PADMEDNRA KUMAR

[Guest]

RESUME
Sachin Suresh Sutar
Email : sachinmech1988 AT gmail.com

CAREER OBJECTIVE :
Seeking a position to utilize my skills and abilities in the mechanical field that offers professional growth while being resourceful, innovative and flexible.
EDUCATION QUALIFICATION :
Graduate :
- Branch : Mechanical Engineering
Academic Grade Sheet
Qualification Board/ University Year Obtained marks Percentage
B.E BAMU
Aurangabad 2010-11 1015 67.70%
T.E BAMU
Aurangabad 2009-10 871 58.06%
S.E BAMU
Aurangabad 2008-09 913 60.86%
Diploma in
Mech. engg. MSBTE 2007-08 909 69.92%
12th Kolhapur 2004-05 310 51.67%
10th Kolhapur 2002-03 438 58.40%
SOFTWARE PROFICIENCY :

Designing software : Auto cad, Unigraphics.
WORKING EXPERIENCE :
MANUGRAPH INDIA LTD.
UNIT NO.1, SHIROLI MIDC,
KOLHAPUR.
Working From 17 Nov. 2011 to till up to date.
Designation : Trainee Engineer.
Department : R & D.
FOLDER group-
Working on Printing Press main aggregates like Folder 2 :2:2 , 2:3:3 of various cut off, post
printing and other.
Having good proficiency on AutoCAD, which is mainly used for the machine layout purpose.
Working on software NX-8 for part modeling, drafting, assembling & assembly drafting as per
design. [eg. gripper cylinder assly components ie. Griiper cylinder, Cam , cam holder
assly,bracket,lever,blade. And in post printing fixture for setting centre distance for
conveyor, pin, base plate etc.]
Weekly checking of ECN on ERP. And update the assembly w.r.t. ECN. (AutoCAD & Unigraphics)
OPM & SPM group-
Modelling and drafting of component and assembly w.r.t. configuration of machine by using
Unigraphics (NX7.5).
Co-ordination with other departments like production, Assembly.
Having good proficiency on ERP system.
PRODUCT : Web Offset Printing Machines, Jaw Folders, Auto Pasters, etc in India and abroad.
PROJECT :
Diploma : Vibratory sand strainer machine.B.E. : Design of gate for conveyor for feeder conveyor by using PRO-E

PRESENTED SEMINAR ON :
Self healing material.
PERSONAL PROFILE :
Name : Sachin Suresh Sutar.
Nationality : Indian
Date of Birth : 02/07/1988
Marital Status : Unmarried
Hobbies : Playing football, Making new Friends, Travelling,
Languages Known : English, Marathi and Hindi
Signature
Sachin Suresh Sutar

[Unregistered]

RAJENDRA V. LATE
E-Mail :-laterajendra AT yahoo.com ;

Senior to Top Level Assignments in Design and Development / Tool Room/
Manufacturing / New Product Development with an organization of repute.

Professional Profile :
01) Diploma Mechanical Engineer with 7.3yrs Exp. in CAD/CAM Tool-designing, modeling and Programming.
02) A keen learner with academic credentials in Diploma Mechanical Engineering with aggregate of 83%.
03) Presently associated with RASANDIK ENGINEERING INDUSTRIES INDIA LTD. As a Sr.CAD /CAM
Engineer Aug 2012 to till dated.
04) A team player with flexibility to work in diverse conditions.
05) Proven track record in implementing cost saving measures to achieve substantial reduction in raw materials.
06) Exposure to CAD/CAM software’s, UG-NX, CATIA V5R17 Del-CAM and auto-cad etc. Proficiency in designing maintenance (preventive & predictive) strategies, procedures and methods; monitoring and controlling maintenance costs.
07) Possess the knowledge of Sheet Metal Dies, Pressure Die casting Dies, Gravity Die Casting Dies and pattern tooling’s.
08) An effective communicator and team leader with skills in troubleshooting, team building capability and proven abilities in planning and managing resources.

Academic :
01) Diploma Mechanical Engineering from Punjab Technical University in 2012 with aggregate of 83%.

Organizational Experience :
01) Presently associated with RASANDIK ENGINEERING INDUSTRIES INDIA LTD. As a CAD/CAM Sr. Engineer (Design and development and CAM Programming) from Nov 2010 to till dated.MIDC Rangangaon Pune.
02) Worked as a CAD / CAM Programmer Jyoti Tooling & Press Comp.Pvt. Ltd., MIDC Bhosari Pune. From March 2007 to Aug. 2012.
03) Worked as a CAD/CAM Supervisor Sankalp forging Pvt. Ltd.. Pimpri Pune. From July 2006 to March 2007.
04) Worked as a CNC Programmer, Poona Forge Ltd. MIDC Talwade Pune 412114. From Jan 2004 to June 2006.

JOB PROFILE;
At RASANDIK ENGINEERING INDUSTRIES INDIA LTD.
01) Tool design & development.
02) ECN modification preparation & implementation.
03) RFQ process data preparation & submission to marketing & sales.
04) CAD Model generation for machining.
05) Design Data updating customer wise.
06) Day to day design planning & execution.
07) Receive instruction from superiors.
08) To Train Trainee Peoples.
09) Design standard preparation.
10) CAD drawing preparation support required to other dept.
11) To Co-Ordinate Other Dept.
12) Data / Record updating.
13) Housekeeping (5 s) activity.
14) Safety & maintain discipline.
15) Tool-Design and devolvement and Programming of dies and patterns by using UG NX 7.5.
16) Design / Redesign of new components / sub systems according to the input from customer, Marketing, Quality, Service & Production Engineers Respectively.
17) To complete the project in stipulated time.
18) To co-ordinate with Vendor for Development of parts as per the Standards to meet the specification mentioned in drawings.
19) Co-ordinate with testing dept. in respect of design changes.
20) Co-ordinate with Production department for fitment trials after approval of Design.
21) Monthly scheduling of Die manufacturing for CNC, tool manufacturing and tool assembly.
22) To participate in tool devolvement activities.
23) Yearly PM Plan for die-maintenance.
24) Yearly PM Plan for Fixture-maintenance.

At Jyoti Tooling & Press Comp.Pvt. Ltd :
01) Tool design & development.
02) ECN modification preparation & implementation.
03) RFQ process data preparation & submission.
04) CAD Model generation for machining.
05) Design Data updating customer wise.
06) Day to day design planning & execution.
07) Receive instruction from superiors.
08) To Train Trainee Peoples.
09) Design standard preparation.
10) CAD drawing preparation support required to other dept.
11) To Co-Ordinate Other Dept.
12) Data / Record updating.
13) Designing and devolvement and Programming of dies and patterns by using UG NX, CATIA V5, Del CAM .
14) Design / Redesign of new components / sub systems according to the input from customer, Marketing, Quality, Service & Production Engineers Respectively.
15) To complete the project in stipulated time.
16) Monthly scheduling of pattern and die manufacturing.
17) Smooth communication with our customers about complaints if any.

Projects :
The following projects done in Rasandik engineering industries India Ltd.
Client Mahindra and Mahindra
01) Mahindra Inner door for XYLO (FDI blank and pierce tool).
02) Anchor plate tool designing and manufacturing for C-pillar assembly.
03) Patch-tool designing and manufacturing for side engine assembly.

Client HAL Bangalore :
01) Aero Space Adaptor housing assembly. Cam Programming.
02) Elvon support bracket LH and RH.
03) Flour beam LH and RH.
04) Spar LH and RH.
05) Bottom bracket.

Client TATA industries services Ltd Delhi. And TAML Bangalore. :
1) Layup tool T-Stiffener. This tool for Air Bus. It is aero space molding tool.
2) Trim fixtures. This tool for Air Bus. It is aero space fixture.

Client TVS Motors Hosur :
01) U-129 fuel tank mounting brackets (8nos of components) and foot-rest (2nos of component).

Client Genral Moters Ltd :
Front pillar lower programming
Front pillar upper programming
. stering colum programming
QTR-INNER-RH/LH PROGRAMMING

Software Skills :
DEL-CAM, : NC Programming, modeling and surfacing.
UG-NX, CATIA V5 : Modeling, Surfacing, Assembly and Drafting.
AutoCAD : 2D

Academic Project :
Title : Automated Material Handling System
Team Size : 8
Duration : 2 Months
Description : Main objective of this project is to reduce the manual work of the production line. It reduces the power consumption in transfer lines. The system involves the LASER beam to operate the belt conveyor for the transfer of material from one place to another with electronic counter for the purpose of counting the parts.

Personal Vitae :
Name : Rajendra V Late
Date of birth : 25/02/1975
Nationality : Indian
Languages : Hindi, English, Marathi.
Alternative Email-id : laterajendra AT gmail.com

Declaration :
I hereby declare that the information provided above is true to the best of my knowledge and belief.

Date :
Place : Pune
(Rajendra V Late)

[yogeshmk619@gmail.com]

YOGESH MAHADEV KATEKAR
E-Mail : yogeshmk619 AT gmail.com

Professional Profile :
I am an enthusiastic and professional Accountant who enjoys being part of, as well as leading, a successful and productive team. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Objective :
I am now looking to build on my extensive range of technical skills within a suitably challengingrole.
I am keen to achieve further professional development.

Personal Details :
Date of Birth :18th Aug. 1990.
Languages :English, Marathi & Hindi.
Interests & Activities :Music. Reading books, Playing Chess, Painting.
Gender :Male
Marital Status :Singal

Educational Qualifications :
Diploma in Automobile Engineering completed from MSBTEApril 2012.
12th completed from Maharashtra Board -Feb.2009 at Mumbai
10th completed from Maharashtra Board-March 2007 at Mumbai

Formal Qualifications :
COMPUTER SKILLS :
Auto-cad
Windows 98, MS Word, MS-Excel, MS PowerPoint
MS-CIT COURSE :
Windows 98, MS Word, MS-Excel, MS PowerPoint
INTERNET :
E-Mail, Surfing

Work Experiences :
I) Worked in fauracia imission controll pvt ltd as a Quality inspector.
II) Worked in Trupti Auto(Authorized by Hero Honda)as a Supervisouer.
I hereby declare that the above information is true to my knowledge. If I am appointed I will prove my Talent & Intelligence at my best.

Place :PUNE
Date :-
( YogeshMahadevKatekar)

[ajithsnair13@gmail.com]

CURRICULAM VITAE
PERSONAL INFORMATION
AJITH SOMAN
e-mail : ajithsnair13 AT gmail.com

CAREER OBJECTIVES :
To harness my potentialities for the benefit of the organization as well for the interest of the society and groom myself in ladder of success by dint of hard work.

TECHNICAL QUALIFICATION :
Diploma in tool & die making (3 yr+1year industrial training) (2009-2012)
NETTUR TECHNICAL TRAINING FOUNDATION (NTTF) KOCHI, KERELA

DESIGN KNOWLEDGE :
Having knowledge in Plastic Mould & press tool. Design in software like
Auto CAD .
Uni Grphics (NX6, NX8 & NX8.5)
Drafting knowledge in NX power drafting

INDUSTRIAL TRAINING (2012-2013) :
A unit of motherson sumi systems limited (smiiel) Noida
SMIIEL (A UNIT OF MOTHERSON SUMI SYSTEM LIMITED)
Undergoes industrial training in tool designing from 9-7-2012 to 9-6-2013
Sectional knowledge of C.N.C milling, conventional milling’s, W.E.D.M, E.D.M, Quality control, quality assurance department
Having Knowledge of all machines and machining process
Knowledge of measuring instruments

JOB PROFILE :
Handling of New projects
Moulds designing & detailing in U.G and Auto CAD

PERSONAL MEMORANDOM :
Name : Ajith Soman
DoB : 14-3-1992
Father’s Name : T M Soman
Sex : Male
Nationality : Indian
Marital Status : Single
Language known : English, Hindi, Malayalam.
Hobbies : Sports,Games,Music & Movies
E-Mail :ajithsnair13 AT gmail.com

SALIENT FEATURES :
Theoretical and practical knowledge of press tools moulds and die casting designing of tools (moulds and press tools knowledge of various methods of parts manufacturing

knowledge of jig boring ,spark erosion and other special purpose machine working knowledge of qulity controll and all types of measuring instruments knowledge of heat treatment tool and dies

DECLARATION :
I hereby declare that all the above facts given by me are true to the best of my knowledge and belief.

Thanking you Date :-6/26/2013

(AJITH SOMAN)