www.phpl.co.in Premier Hollowares Pvt Ltd Dadra & Nagar Haveli : Plastics Blow Moulding Production officer

[mskavi]

Premier Hollowares Pvt Ltd Dadra & Nagar Haveli / Silvassa : Production officer - Plastics (Blow Moulding) at Silvassa
Website: http://www.phpl.co.in
phpl.co.in

Keywords: Moog controller, Parison, blow mould, blow moulding, 200 lit, 210 lit, 250 lit,

Designation: Production officer - Plastics (Blow Moulding) at Silvassa
Experience: 3 - 8 Years
Location: Dadra & Nagar Haveli / Silvassa
Industry Type: Chemicals/ PetroChemical/Plastic/Rubber
Functional Area: Production, Maintenance, Quality

Job Description:
Working on blow moulding m/c.s of 200 lit or more capacity drums. Exposure to Moog Controller, Parison, etc. is a must. Manage resources well & get the maximum output. Exposure to ISO, Ms-office is a must. Worked as MR will be a added advantage.

Desired Candidate Profile:
Graduation/PG in Plastics (CIPET) with experience in handling Moog Controller & Parison. Exposure to manufacturing of 200lit or more capacity drums/barrels. Exp. of handling resources to the fullest & provide maximum output. ISO exposure is a must.

Company Profile:
WE ARE ONE OF THE LARGEST MANUFACTURERS OF BARRELS IN INDIA. WE ARE CERTIFIED WITH ISO 9001:2000. ESTABLISHED IN LATE 60'S THE GROUP IS HIGHLY REPUTED IN THE INDUSTRY FOR ITS INTEGRITY, PRODUCTION & QUALITY.

Address:
Premier Hollowares Pvt Ltd
Plot no. 21/1, Ground floor - 'Rikhav', Near
Uganda Petrol Pump/ Wadala Depot, R. A. Kidwai
Rd., Wadala (W)
MUMBAI,Maharashtra,India 400031

Email Address: hr@pgpl.com

Keywords: Moog controller, Parison, blow mould, blow moulding, 200 lit, 210 lit, 250 lit,

[Guest-IJT]

Summarized Experience / Expertise
From: - SANJAY SETHI
Date of Birth 14th September 1963
ADDRESS: - 4502-P SECTOR 23-A GURGAON, HARYANA, (INDIA) PIN-122017

EDUCATIONAL / QUALIFICATION / SPECIAL SKILLS / WORK EXPERIENCE

BASIC ENGINEERING: Seven Semesters (3½ years) Metallurgical Engineering - 1988.
INDUSTRIAL SAFETY: Engineering Post Diploma in Safety Engineering 1994.

WORK EXPERIENCE: More than Twenty one years out of which ELEVEN YEARS IN MIDDLE EAST FOR THE OIL & GAS INDUSTRIES PDO- OMAN, SAUDI ARAMCO (KSA), KNPC in KUWAIT, QATAR PETROLEUM AT DOHA QATAR. Three YEARS IN PETROCHEMICAL CONSTRUCTION PROJECT IN INDIA. SIX YEARS IN MECHANICAL PRODUCTION SAFETY IN INDIA.

Presently I am working with M/s MTR Corp. as a Safety Advisor for DAMEPL Project from April 2009 to till date:-
- Responsible for Investigation of all accidents and incidents occurred, in accordance with the safety management plan. Maintains and drives the Safety Management Plan and Emergency procedures. Ensure safety in operations, maintenance, Construction PST (Power Supply Traction) High voltage Power cables, sub station, Controlled Area etc. Organize and facilitate safety meetings on shop floor. Conduct Training for staff/workers at site on all safety aspect. Prepare a monthly safety report, including all safety statistics and report to higher management. I had been undertakes regular audit of work areas, equipment inspection, safe guards and methods of working to ensure compliance with the Safety management Plan. Review and analyze reactive & proactive parameters from the improvement point of view.
- Coordinate with Project Manager to identify and determine corrective action or actions assist requirements to ensure compliance of HSE policies;
- Facilitate internal audit review process;
- Monitor internal audits for patterns to collect and distribute statistical information to managers; Conduct Risk Identification assessments to minimize future incidents.
1. June 2008 to Feb. end 2009 I have worked as Consultant HSE Manager with M/s Cairn Energy India Pty. Ltd. for their Rajasthan Northern area development up steam project at Barmer Rajasthan in India. This Company is exploring and producing oil and gas in sharing pattern. Responsible for investigating and completing accident/incident reports as needed.

2. February 2006 to June 2008 I have worked with M/S KREMENCO for their Mech. Maintenance Project for KNPC Shuaiba Refinery Kuwait. I have been responsible for entire SHE activities in this project including SHE Induction, Work Permit Audit SHE Training and Certification.

3. April 2004 to July 2005 I have worked as a HSE MANAGER with Punj Lloyd LIMITED DELHI. For their Overseas project in Sultanate of Oman for PDO 48” Gas Export Pipe Line from Shai Niyada to Sur 265 KM. I have been responsible for entire HSE activities in this project.

4. November 2001 to January 2004. I have worked as Safety officer group in charge with M/S Agap Arabia ltd. KSA for safety Control at Various Project. A) Haradh Gas Plant for Utility and Offsite for Saudi Aramco. B) Saudi Methanol field tank erection. C) Advanced fire training center for Saudi Aramco. D) Integration of steam and Power Generation at YANBU NGL.

5. April 2001 to May 2001: - Pre Schedule very Short-term assignment in Oil & Gas Industry at Doha- Qatar for Shut Down and Maintenance.


6. August 1999 to January 2001: - Worked as HSE Advisor with M/s Al- Hassan Engineering SAOG, for their Service Contract of Civil, Mechanical, Electrical, Instrumentation Project for PDO in the Sultanate of OMAN.

7. April 1997 to March 1999: - Worked as Safety Engineer with Saudi Aramco Projects for M/s Fouad and Fouad Abdullah / Petcon in Kingdom of Saudi Arabia.

8. May 1995 to April 1997:- Worked as Safety Supervisor with SVC Super Chemical Limited (Petrochemical Project of PTA) during Construction and Commissioning of the Project.

9. August 1988 to May 1995:- Worked as Safety Inspector with M/s Hindustan Development Corporations. Wire Drawing Units, Material Handling Projects and cyanides chemical plant.

TECHNICAL, SUPERVISORY MANAGEMENT: - Liaison with Project Management for the Implementation of the loss prevention program on the matters related to safety with the plant work areas. I may plan, direct controls and supervise the activities of a team of professional Safety and Loss prevention and Environment supervisory staff to ensure full implementation of the division's HSE program . I may. Ensures the implementation of the divisional HSE plan, conducts necessary HSE audits and inspections to ensure proper implementation of such plans includes maintaining interactive coordination with Corporate HSED to align all divisional plans, procedures and activities with the corporate HSE policies, plans and procedures. Initiate, update and review Manuals related to HSE as deemed necessary in coordination with other parties. Participate in the development of the Field Facilities plan as appropriate to the fire and safety related assets. I may direct the provision of adequate assistance to the Contractors/ Vendors in compliance with HSE programs/ procedures through interpretations and proper guidance as appropriate.