www.sankalpforge.com Sankalp Forgings Pvt Ltd Pune : Boiler, Power Plant fabrication ISO,IBR, ASME

[mskavi]

Sankalp Forgings Pvt LtdPune : Plant Head
Website: http://www.dehu.in; http://www.sankalpforge.com

Designation: Plant Head
Experience: 15 - 20 Years
Location: Pune

Job Description:
Person shall be from heavy fabrication Industry, preferably from Boiler, Power process Industry & sound Knowledge in raw material ( plate, angle, channel, pipe ) preferred to have knowledge in stainless steel & superalloy fabrication

Desired Candidate Profile:
should have knowledge in quality systems like ISO,IBR, ASME, person will be responsible for executing each & every orders, should able to handle 150 to 200 people, person must have good leadership skill, person must be conversent with local languages

Company Profile:
SANKALP GROUP is established in the year 1996, since then we are one of the leading manufacturers of Machined Components for Automotive and Oil Field Industry.Our products are currently being exported to the USA,UAE, Germany,Switzerland,Singapore etc

Address:
Sankalp Forgings Pvt Ltd
Gate no. 1093/1& 1093/2 Karandi, Chakan Shikrapur
road, Tal.-Shirur Dist.- Pune
PUNE,Maharashtra,India 412208

Email Address: careers@sankalpforge.com

Keywords: fabrication

[Guest]

RESUME
M.SURESHKUMAR DAVID
EMAIL : yemyes_david AT rediffmail.com
OBJECTIVE
Seeking a challenging opportunity for carrier intensification to the Successful execution in the selected sector.
Working Experience : More than 15 years experience in the field of Operation and Maintenance of various capacity Power Plants and its related equipments.
Experience _1
From March 2003 to till date
Organization : Hofincons InfoTech & Industrial Services Ltd, Chennai
Position : Sr. Site Manager (O&M)
Site : M/s Maithan Ispat Ltd, Jajpur Road, Orissa 30 MW Power Plant


Experience 2
From December 1999 to January 2003
Organization : M/s Tekoner Engineers & Consultants, Coimbatore
Position : Head(O&M)
Site : M/s Kalindi Steels & Power Ltd, CG 8 MW Power Plant
M/s Sai Chemicals Ltd, CG 8 MW Power Plant
Experience 3
From June 1994 to October 1999
Organization : M/s DCW Ltd, Arumuganeri, Tamilnadu
Position : From 1994 to 1995 Technical Asst (Boiler Unit)
From 1995 to 1997 Asst Engineer (Utilities)
From 1997 to 1999 Sr. Engineer (Utilities)
Responsibilities :
- Responsible for smooth running of 30 MW Power Plant with taking care of all related equipments, operation & maintenance of AFBC boilers, turbine and it’s auxiliaries like BFP, water pumps, blowers, gear boxes, soot blowers, Fans , Water Treatment System, fuel & ash handling systems,
- Follow-ups of scheduled preventive and on line maintenance,
- Computerized controls & Data entry and filling,
- Data preparation (Daily, Weekly, Monthly Reports),
- Maintaining of spares and consumables,
- Routine check of all equipments, log books and observing abnormalities in the system and equipments,
- Maintaining Chemical stocks,
- Keeping better communications with superiors and clients,
- Maintaining safety equipments in operatable condition,
- Maintaining the water treatment system and quality,
- Overall site supervision,
- Arranging all fronts to run site smoothly,
- Coordination with OEM contractors,
Field Experience :
- Experience in attending breakdown maintenance & schedule maintenance works.
- Experience in plant shutdown works.
- Exposure in AFBC&FBC boilers light up.
- Experience in maintenance of fuel handling system like belt conveyors, vibrating screen, coal crusher, drag chain conveyors, pocket feeders etc.
- Experience in maintenance of ash handling system, soot blowers, drag chain,conveyor,etc
- Experience in maintenance of Pumps like Boiler feed pumps, cooling water pumps, LP & HP dosing pumps, CEP.
- Experience in maintenance of all fans like FD,ID,PA etc
- Experience in monitoring of Lubricating of all equipment as per schedule.
- Experience in assembling of dragchain,cooling water pumps, gear boxes, blowers, LRSB, RSB
- Experience in satisfying customer & EPC during Erection sites.
Experience in planning & mobilization of manpower, tools, instruments
- Experience as site in charge to get maximum quality of work from employees.
- Experience in dealing machining, Subcontract activities related to Overhaul & Erection if required
- Experience in handling all measuring instruments.
- Experience in Customer coordination & liaison
- Experience in handling any site.
- Regular monitoring of general and preventive maintenances of machines
- Experience in efficient material & process planning of work orders.
- Planning the project processing time by evaluation machining time of all jobs and critical jobs to be taken care to complete project within time.
- Experience in preparation of Operational process sheets for every job of all work orders.
- Schedule the load to machines to optimum utilization.
- Planning the excess load and special machining jobs, offload to subcontract.
- Regular monitoring the progress of jobs till completion of projects.
- Planning jobs to produce quality of jobs economically.
Vendor development
- Accessing, enrolling of vendors. Annual quality rating of vendors.
- Estimating Machining cost of Various Conventional and Unconventional jobs
- Efficient Follow- up of Sub contractors of Piping , Rigging, welding works and various conventional & unconventional machined jobs
- Making sure vendors to perform any work with good qualities
Educational Qualification :
Sl. No Examination Passed Year of Passing Percentage of Marks Name of Institution
1 Hsc 1988 85 HHSS Tuticorin
2 DME 1992 72 Gov’t Polytechnic
3 AMIE(Industrial Engg) 1997 69 Institute of Engineers-Calcutta
Boiler Certificate :
Boiler Operation Engineer Certificate From Karnataka
DECLARATION :
I hereby declare that the above mentioned informations are true to the best of my knowledge.

(M.SURESHKUMAR DAVID)

[Guest]

S.K. SHARMA
Email : shiv_uniq AT hotmail.com; shivuniq AT gmail.com

OPERATIONS & MAINTAINENCE PROFESSIONAL
Track record of generating extraordinary performance in fiercely competitive scenario , a rare combination of rich exposure to diverse Industries ranging from Thermal Power Plant, Heavy Chemicals, Mineral & Mining, Tiles Industries and Paint shop sector.
Seeking challenging leadership assignments as a Dy.G.M, Sr.Mgr.(Mech.) with a reputed organization. Currently spearheading functions with Taikisha Engg India Ltd (Japanese company) as a Mgr. Projects.
M/S Taikisha Engineering India Ltd.
M/s TAIKISHA LTD JAPAN (TKS) has a high reputation in paint finishing, air handling, ventilation & clean room systems. It has been operating in India successfully since 15 years. In 1995 TKS joined hands with M/s MARGO ENGINEERS PVT. LTD. to form a joint venture company M/s TAIKISHA ENGINEERING INDIA LTD. along with M/s SUMITOMO CORPORATION OF JAPAN
Company undertakes Turnkey projects for Automotive paint finishing plant & Equipment. Taikisha Engineering India Ltd has made Paint Shop for Automobile Company i.e. Tata Motor, Maruti, Honda, Toyota, Escorts, Yamaha, Ashok Leyland, Bajaj, Denso, Indian Railway, Daimler,Nissan,Tata Cummins Ltd etc.
Accomplished, proactive and multi-skilled professional extending over 21+ years of rich corporate experience & proven expertise handling the operations related to Erection, alignment and maintenance of 210MW Thermal Power Plant, Caustic Chlorine Plant, an ISO 9002 Ceramic & Mineral Processing Plants, Fatty Acid & Toilet Soap, Pesticides Plant & 30 M. Watt (Gas Turbine & Engine) Captive Power Plant & I had managed a successfully a Asia’s biggest New Paint shop for Car, Commercial Vehicles for Tata Motors Ltd at Rudrapur(Uttarakhand) worth Rs375 Crore and also Handled a Project for New Paint shop for Truck Cabin as a C.M for M/S Ashokleyland with good Quality-DFT and within the Time frame.
Also done a successful New Paint shop Project for Engine Painting Plant for Tata Cummins Ltd at Phaltan-Pune within Schedule with quality and without any safety violence.
Technology Overview :
- Skills in installation & maintenance of Vessels & Tanks (Glass & Rubber lined), Injection Molding Machine, Steam Ejectors, Vacuum Pumps, Vacuum Drum Filters,Exceller Filters, Heat Exchangers(Plate, Shell & Tube types),Gas Train, Transfer Car Trolley, Lifters, Fire fighting Equipments-Q.B.D,Deluge Valve and piping with spray system, Turn Table, Roller Beds, Scissor Lifter,Shutle Cars, Air Washer, Bowl Mill, Ball Mill, Valves, Compressors, Heavy Agitators, Belt Conveyors-O/H & Floor Conveyor for Paint shop, Bucket Elevators, Pulverizes, I.D, FD, PA.Fans, Blowers, D.G.Sets, Boilers, various Pumps & H.E.M.M-BML-200,WA-200, JCB 3D & 3DS, TATA HITACHI-300, Fork Lifts, Dumpers & Tractors.
- Well versed with installation & maintenance of various Plant & equipment-Thermal Power Plants (2x110 &210MWatt), Chilling Plant, D.M. Plant, Softener, Formulation Plant, Hypo, Cell House, Flaking, Brine Plant, HCL Plant, Chlorine Plant, Salt Storage, Effluent Treatment Plant, Fire Fighting Plant, Ash handling, Coal handling, PSA Nitrogen Plant, Cooling Towers, Jaw Crusher Plant, Pulverizing Mills, Dryers (Spray), Incinerator Plant, Gasifies, Heat recovery Plant, Utility-Boilers & Power Station-D.G.Sets(High Speed & Low),Managed Installed, Commissioned and done Maintenance for Paint Shop-PT,ED,ED Oven, Top Coat Oven, HVHC, Working Area, ASU,Sludge Pit, Top Coat Booth, PVC Booth,Utility-HWG,D.M.Plant,Chiller Unit, Cooling Tower, Conveyor-O/H and floor etc.
CORE COMPETENCIES :-
- Project Management - Erection & Commissioning - Maintenance - Safety Measures - QA
- Billing & Documentation - Manpower & Erection Scheduling - Maintenance Record,
- Project Supervision - Cost Control - Store Inventory.
- I.T.Skill- Knowledge about M.S.Office,PowerPoint,Excel,Docu Works,M.S.Projects,Internet Surfing etc. - 5 S(Segregation,
Systematic Arrangement, Spick & Span, Standardizing & Self Discipline).
PROJECT PLANING :-
- Review of Technical details for assigned Project; understand Master Schedule submitted to Client in sale offer.
- Make an Erection/Micro Schedule based on Master Schedule and circulate to All Concern dep’t. before submission
to Client for review and for finalization.
- Make Bid documents for selection of Sub cons with safety documents to follow parameters, manpower control etc.
- Make a Organization Chart of suitable staff for assigned Projects according to system –like for Mechanical erection
Work, Electrical erection, Conveyor Installation, Store-Material Management, Safety Staffs & Robot etc.
- Make a list for Site Mobilization of Sub con Manpower with tools & Tackles for Site opening as per Schedule along with Taikisha Staffs and arrange necessary items for Site Office-Container,Table,Chaires,I.T facilities,Conveyonce & Guest House with all necessary facilities near to site location.
- Finalize location for Material Storage area and for Site Office for Taikisha, Sub cons with Prefabrication work for
Piping, trolleys, Ducting etc.
- Release apparatuses list for Project accordingly to system requirement & finalized list with Client after discussion and take Approval for ordering Equipment, Fabrication of Equipments-Tanks, Drain Pans, Enclosures & Panels etc.
- According to Apparatus list release Purchase Orders for Bought out items as well as Fabricated Items.
- Take approval and Certification for Technical Specification for Mechanical & Electrical for System for Project.
- Make a Schedule for Sub cons Manpower and according to that suggest to make Labour License, ESI,PF details
for submission to Client for Project.
- Manage and arrange all require documents for site requirement like load testing certificates for Chain pulley Block
For 2.0 and 5.0 tones capacity, Hook chucks and Hydra Crane driving License, Ceiling wire etc.
- Make proper control on material dispatch and according to that site erection, assure to maintain micro schedule.
- Responsible for erection and for Commissioning of PT, ED, Ovens, Booth, Working Area, Air Supply Unit, WRS, Paint Circulation System, Fire Fighting Unit, Utility and Conveyor system with require quality aspect.
Key Achievements / Maintenance Planning :-
- Interact with Contractor for Daily morning meeting for Safety, Explain today erection work plan, Check all Safety Parameters, Manpower strength, get work up date & fill it every daily till 5.0PM.
- Review Micro Schedule as per Plan VS Actual on day to day and weekly Basis.
- Interact with Sub con and short out if any Issues, for drawing, Material,Hardware or Fabrication Mistakes etc.
- Provide support in Plant Operation, Maintenance and for any Machine Break down or any Safety Issue etc.
- Maximize the availability of equipments by providing proper Guideline & supervision for smooth Operation and
Maintenance of Plant equipment.
- Implementation of procedure for day to day maintenance work Schedule maintenance, emergency repair and any
Modification or for any miner or major overhauling of Plant equipment etc.
- Optimizing inventory require for Plant maintenance.
- Set target & goals for Operation and maintenance team to ensuring equipment and plant up keepment.
- Conduct training programs on best maintenance practices and try to improve awareness of both Teams.
- Preparation and timely submission of equipments status report, equipment availability & Utilizations record,
max.break down machinery reports along with available spare part list and suppliers detail for smooth Operation.
- For Paint shop-PT,ED,Oven,Paint Booth,WRS,Work Area,A.S.U,Conveyor,Sludge and Utility etc-
- After first heat-up trial set temp.of Tanks-Degreasing, Hot water, surface conditioning & Phosphate tanks as per spec(from 55 to 65Deg.celsius),also set Valve position(%of opening) either manual or Auto Volves-2way & 3ways for Tanks and Heat Exchangers, similarly after getting set point set require temp.& water pressure detail on HWG panel(110-140deg.celsuas & water inlet, outlet pressure etc) and interlink with Mech. seal pump etc.
- After satisfactory report of Paint supplier for Bath making, arrange require bag filters(most probably 20-25Micron),
Take crater test report, paint supplier will provide report-most probably result comes satisfactory.
- Once recheck conveyor-hangers tact time as per spec.and by stop watch, if there is any correction do, should be accordingly to process time and as per cycle time.
- Once recheck Rectifier Current and Voltage setting and interval, should be according to DFT result, it’s depend on
Body model to model and surface finishing- require proper wiping and proper Pre treatment perhaps (DFT should be-Min-20, Max.28 Micron) which will be define by Paint supplier.(take care about Air Bubbles).
- Once set Valve opening must set and fix by marking and locking special take care for ED circulation Pump and always make a alternate arrangement of Spare Pump, must be ready for any emergency.
- Before SOP must take trail of all Hanger to run at least 24 hours (check alignment, loading, unloading, proper tilting & there is no current leakage etc) and after getting satisfactory trial release for SOP.
- Make sure proper & timely spray, reaching timely temp.working of deluge valve, hanger passing and interlocking,
Judge proper working of Fresh Air supply and Exhausts fan (no fumes should come out from roof).
- Once check parameters of Ovens-start up temp.keep-up zone area temp.and graphs should be approve by Paint supplier which will be depend on Paint quality-DFT so require many trial for set up temperature of both Oven.
- Before SOP set water flow for spray booth, must be check from sludge pit( mark a level before running and then running so that easily understand minimum consumption of water, check cyclone and proper spay in the Pit and sludge removal at certain intervals for that Client-Paint supplier add foaming agents in water etc.
- Before start of Production, check installation of internal risers, external piping for Valve position,Temp.& Pres.Guages,Themo couples, drains, attend leakages & then flash off all line then do pressure test at least hot water line, check proper supporting, colour of pipes according to approved colour/ code by Client.
- Check level sensors, over flow, working of solenoid Valve, Auto Dempers,temp.sensors on Control Panels for Process (Tanks and for Burners ) and proper programming for Conveyor as well as Process then go for SOP.
PROJECTS HANDLED INDEPENDENTLY :- Jun 2004 - July 2006
. Project Mgr –Done Project consultancy for Vijay Solvex Ltd, Alwar for 100(T.P.D) Vanaspati Refineries for Colombo
Plant, at Sri Lanka.
- Plant Mineral Processing-done erection (for Almoda Magnesite Ltd) from CCS Project & Equip. Delhi.
- Managed Projects site as a Project Mgr for 30 M.WATT Captive Power Plant (G.T) for Gujarat Flourochemicals Ltd, Dahej (Guj.) from Chaitanya Contractor & Engr.Pvt Ltd, Mumbai.
- Mech.Engr. & Incharge, Anchor Daewoo Ind Ltd, Bhuj (Guj.) for Soap Plant (Earth quick zone), Nov 2003 – May 2004
- Tasked with handling project for Fatty Acid &Toilet Soap, Making M.T.O for spl Structures.
- Conducted checking of Fabrication & Erection of Columns & Beams, Tanks, Platformes, Staircase etc.
- Accountable for Bill Verification of all Contractors as per Drawing, fabrication and erection of 4800 Tone Heavy erection.
Dy. Manager (Maint. & Prod.), Ashapura Minechem Ltd, Mumbai, Boxite Mining, Jun 2002 - Oct 2003
- Managed Erection & Commissioning of Jaw Crusher Plant (75TPH), Screening Plant, Belt Conveyors, Pulverizes, D.G.Sets (6.8 &125Kva), Weight Bridge (40.M.T) & also done maint. of HEMM- TATA-HITACHI 300, JCB-3D & D.G, Also done Cabling of all Machines & Street Lights.
Wolkem India Ltd-Sirohi Road, AN ISO-9002 CO, W.I.L (Mineral Processing Plant)
Jr. Project Engineer & as a H.O.D (Mech.), Amliya Division, Apr 2000 – May 2002
- Handled Maint. & Modification for Jaw Crusher Plant (50-85tph) for Wollostonite crushing. Instrumental in reducing Breakdown time by maintaining proper discipline &schedule for Man & Machineries & taken better out put. Installed Sec Jaw Crusher, Belt Conveyors for Dressing (20nos) & Workshop for Maintenance of H.E.M.M / Dumpers, Welding work. Contributed leadership for ISO14001 (Amliya). Maintained records for an ISO 9002, capital & Major Annual budget for maintenance.
Prior Experiences :
Senior Mech. Foreman, Kajaria Ceramics Limited, Tapukada (Raj.), an ISO 9002 Company, May 1998 - Jun 1999 .
Done Modification of Glaze line, sorting line, Glaze Preparation, Belt & Chain conveyor, Kiln Exit, Tiles Turner-Pusher Dust Collector, Vibrator Sieves, Veriators, Roto & Gear Pumps etc
Mechanical Maint. Supervisor, Mardia Chemicals ltd, Caustic Chlorine Plant-S.Nagar (Guj.)-MCL, Jun 1996 - Nov 1997.
Successfully done Project for India’s First Biggest (343Tpd) D.C.S (Distribution Control System) Caustic Chlorine Plant Caustic Chlorine Plant -Membrane Cell House, Flaking Unit, Brine Plant, Chlorine Plant, Boiler, DM Plant, E.T.Plant,
Pump House, Vacuum Drum Filter etc.
Also done supervision of erection for Process Piping (C.S, Alloy, FRP, PP, Tafflon & Rubber Lined), Pipe Racks & Sup-
ports and testing-Spark, X-Ray,DPT etc
Also done erection & Maintenance of Equipment -Heat Exchangers, Vassals, Reactors, Pumps &Vacuum pump, Roto
pump ,metering pump and Diaphragm,plunger & Screw Pumps, Gear Boxes, Compressors-Reciprocating-Screw etc.
Mech. Supervisor, HPM industries ltd, Alwar (Raj.)-Pesticides Plant (Mono Crotophose) -------------- Jan 1995 – May 1996
Done erection, commissioning and maintenance of Utility, Main Plant-Monocrotophase, Chiller Unit, Boiler, D.G.Sets, Formulation Plant, Crusher Plant-Pulveriser Unit, P.S.A.Nitrogen Plant, ETP Plant, Cooling Tower Unit,
Incinerator Plant, Weighing Briedge-20 M.Ton, Pump House etc.
Done Inspection of Tanks-Glass lined, Rubber lined, FRP By spark testing and for Tanks-M.S.and S.S etc.
Done maintenance of Pumps, Compressor, Vacuum Drum Cleaner, D.G.Sets, Pulverises, Boiler, Chiller Unit, Mech.Seal installation and done Maintenance of Heavy Agitators, Heat Exchangers etc. .
Erection Supervisor, V.D.swami & co. Ltd, Kota (Raj.)- Oct 1988 – Nov 1994
A construction company (Thermal Power/ Boiler and Heavy Erection work) :-
Done supervision of erection&Alignment for MSL, HRH, CRH-high pressure steam piping, Echnomiser Panel,S.H.Panels,Auxil- iary Piping,L.P.Piping,Coal Piping, Steam Tracing Line,Implse Line, Down Comer Piping, Heavy Structures,Ducting,Vassels, Tanks (IBD,CBD,BOILER DRUM etc), Vessals,Equipments,Pipe Rack & Pipe Support, Insulation-Hot & Cold, Spray etc.
Done Testing-X-Ray, Ultra Sound, D.P.Test, StressReleaving test. Hydro Test, Vacuum Test, Thickness test etc.
Also done erection and Maint.for Coal Handling Plant, Ash Handling, Conveyors, Baggon Triple, Hard facing of coal Firing Nozzles, Heavy Valves for Boilers, Heavy Pumps, Soot Blowers, Air Preheaters etc.
Training Mech. Supervisor,Modi Alkalies & Chemicals Ltd, Alwar, MACL, Feb 1987 – Aug.1988 Done erection & Maintenance for bottling section, weighing bridge, filling station, Mono Rail Hoist, Cylinder and Toners filling station and repairing/maintenance of Valves etc.
EDUCATION CREDENTIALS :-
H.S.S.C. EXAMINATION PASSED FROM MADHYA MIK SHIKSHA MANDAL MADHAYAPRADESH –BHOPAL IN 1981.
- B.Sc (Moths), from Bhopal University, Bhopal (M.P) in Ist Division in the Year-1985.
- Passed B.E.Mech.from Asian Institute of Management & Technology (AIMT) in First Div., Delhi-July-Aug 2009-10.
- Pursue the Examination for M.B.A for llnd Semester from Vinayaka Mission
- IT CREDENTIALS : Proficient with the use of MS-Office, Power Point, MS Word, M.S.Project, Excel 2007, Docuworks, Auto CAD & the Internet surfing for Project support etc..
TRAINING ATTENDED
- Seminar as a HOD (Mech) on Rolling Bearing - Preservation & Maintenance, FAG Bearings India Ltd, Laxmi Vilas Palace, Udaipur dated 27 - 28th 9/2001.
- Awarded (Second Prize Winner-Books / CD & Gifts) & a Certificate for Wolkem India Ltd (an ISO 9002 Processing CO.).
- Attend a Seminar as a Dy.Mgr. Maintenance On Personality Development, & got Award-certificate at Mumbai, in Ashapura Minechem Ltd for Ashapura Group of Ind.
-
CERTIFICATION :-
Certificate, Dy.G.M (Works) on successful Erection/Commissioning, Project for Pesticide Plant (for Project activities, Planning & Maint. Jobs work).
- Certificate from Asst. Engr. Thermal Power Kota RSEB for (H.P) Welding/Piping & Structural work knowledge. Worked with BHEL Indian’s Top most Consultants for Thermal Power Plants.
- WIL (Amilya Div) deputed to Baroda for over hauling/ Maint. Of Jaw crusher Plant, (100Tph) at manufacturer of Crusher –ECOMAN for 45 days for Operational & Maintenance Training.
- Certificate from India Red Cross Society, Jaipur as Life Time Associate (no-2362) for social work.
- Certificate from Kanoria Chemical Ltd (UP) for Participating in Annual Cultural Programs.
-
- PERSONAL DETAILS :-
-
- Date of Birth : - 1st May 1963 - Place of Birth: - Baransi-Uf Banaras (U.P) and Time of Birth: - 5.40 A.M - Passport No: E – 3073975, Issued on dated - 16/ 09/ 2002 and Valid up to – Sept-16 / 09 / 2012 .
- Yellow Card Holder for South Africa (Republic of Sudan) - VISA NO : 0171826 RECT-NO-2131650.
- Permanent Account Number- ANPPS6679H, Issued from-Jaipur (Rajasthan).
- Salary Draw-8.8 Lakh/Annual.
- Expected Salary - more 25% as usual for better change.
- Company has given Laptop-14.1’’, Net Card for better communication with H.O & Netsurfing &
- Hard Disc for Data Storage300 GB-Drawings, correspondence detail etc, Mobile+ Sim Card (Unlimited talk)
- Well Furnished Accommodation with A.C. & T.V.fitted in Main City – Pouch Colony.
- Conveyance facilities- Company has provided a Small Car.
- Train Fare facilities –Provide a First Class Ticket for two & fro.
- Enrolment no-74321943 for B.E.Mechanical from Asian Institution of Management & Technology-Delhi-July-10.
You can see my B.E.result through online to simply put my enrolment no and date of Birth-01.05.1963.
- R.H.Factor & Blood Group - B +-
- Interests and Hobbies: Keen interest in reading books on Technical subjects and Personality etc.

[Guest]

CURRICULUM VITAE

EHTASHAMUL HAQUE

Career Objectives :-
To secure a challenging and responsible position in an organization, where I can utilize my extensive skill to achieve organization goals and grow along with it.
QUALIFICATION
10TH in C.B.S.E with 56%
TECHNICAL QUALIFICATION
DIPLOMA in Mechanical engg. From (H.M.S Rural polytechnic)tumkur,karnatka.
Personal Strength :-Adopting self to any environment and confident of handling any job. Enthusiastic and hardworking.
Work Experience : - 1 year 4 month in production department and sub department assembling. In Spicer India Ltd. Pune, chakan plant.
Responsibility : - working as a team leader.
Software Knowledge :-
1) Auto Cad 2) D.T.P,3) Internet,4)Microsoft PowerPoint

[Guest]

CURRICULUM VITAE
KASHIF AHMAD
ahmadkashif53 AT yahoo.co.in

Objective
Applying my skills as a QUALITY CONTROL ENGINEER to work in an innovative and competitive world. Intended to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential.
Professional Summary
Work Experience in India :
Designation : QUALITY CONTROL ENGINEER
Company Name : M.Y. FABRICATION.
Experience : From July 2011-till date.
Job Responsibilities :
- Inspection of Materials.
- Inspection of fit up joints.
- Inspection of alignment of items.
- Communication with client/consultant inspection agency.
- Checking welding consumable
- Quality check on the material
- Verifying calibration records for testing and inspection equipments.
- Welding, fabrication, erection and visual inspection of the same at site.
- Carry out edge preparation before welding.
- Line checking, Punch listing and cleaning.
- Witnessing Hydro-test.
Academic Project
- One Month Summer Training in IOCL, Barauni, Bihar (In 2010).
- One Month Summer Training in SAIL, Bhilai, CG.(In 2009)
- Project on Vapour Absorption Refrigeration Cycle in guidance of Er. A. K. Rai.
Other courses/Skills

- Operating Systems : DOS, Windows 98, 2000, & XP&Vista, Windows7
- Office Productivity : Microsoft Office
- Auto cad – 2007.
Education
- Graduation : B.Tech (Mechanical Engineering)
University : Deemed University, Allahabad, UP.
Institution : Sam Higginbottom Institute of agriculture Technology & Sciences,
(Formerly Allahabad Agricultural Institute).
Period : 2007-2011
Secured : 90% First Class
- Diploma course in QC & ISO 9000.
- Intermediate
Board : BIEC, Patna, Bihar.
Period : 2004-2006
Secured : 63.22%
- High School
Board : CBSE, Delhi
Period : 2004
Secured : 85%
Professional Highlights
- Capability to supervise the workers.
- Capability to motivate the workers.
- Capability to maintain nice relationship with superiors & Sub-ordinates.
- Comprehensive problem solving abilities.
- Ability to deal with people diplomatically.
- Willingness to learn, Team facilitator.
- An enthusiastic team member with good communication skills to develop creative solutions for challenging client requirements.
- Acquiring Knowledge over various Management Strategies in an Organization.

Declaration
I solemnly affirm that, the details furnished above are true to the best of my knowledge & belief.

I expect your favorable consideration.
Yours faithfully,
kashif ahmad

[Guest]

I am BE Mechanical Engineer with three years experience in thermal power plant. I am interested in these jobs.

[Guest]

I want a Mechanical engineer job.