Qatar Steel Company Dubai : ELECTRONICS & AUTOMATION ENGINEER

[Rajkumargautam]

Qatar Steel Company FZE Dubai/ UAE : ENGINEER/SHIFT INCHARGE-ELECTRONICS & AUTOMATION

Website: www.qatarsteel.ae

Designation: ENGINEER/SHIFT INCHARGE-ELECTRONICS & AUTOMATION
Experience: 5 - 10 Years
Location: Dubai/ UAE

Job Description:
Maintenance of Electronics Equipments (PLCs, etc) of the Wire Rod Mill and Bar Mill and work on Mill automation and maintenance for smooth functioning.

ENGINEER- @ 5 years experience in a WRM / Bar Mill.

Desired Candidate Profile:
SHIFT INCHARGE: 8=10 yrs experience in a WRM.BM Mill. Manage a team.
Give support & train team members. Good knowledge of PLCs and automatio

Company Profile:
One of the Leading Steel Rolling Mills in the Middle East. Product range includes Wire Rod Coils and Bars.
A New Bar Mill under Technical Tie-up with Vai Pomini Italy has been setup. The plant is under Commissioning and soon to for commercial prodn.

Email Address: hrd@qatarsteel.ae

Keywords: electrical engineer,electronics,Shift engineer,maintenance engineer,service engineer,electrical maintenance,Mill automation,Bar Mill

[Guest]

Manoj R. Rai
Email : manoj5_rai AT yahoo.co.in
Manoj R Rai (Btech electrical with 6 yrs experience in Electrical & Automation)
Education

1) Btech Electrical
AMS Gujarat (63.5%)
2) Diploma in Industrial Electronics Engineering
MSBTE Mumbai (67.46%)

3) HSC (Science)
SES Mumbai(45.83%)
4) Secondary School Examination
Agragami Convent, Wardha, Nagpur (57.86%)
Work Experience 6 years
1) Essar steel Hazira Ltd [ 21 June 2010 till date]
Assistant Project Manager, CSP Finishing mill Automation
- Working as a Assistant Project Manager in CSP Finishing mill Automation.
1) Responsible for Erection & commissioning for Finishing Mill (7 no’s) Stand, Sensors in mill.
2) Responsible for Erection & commissioning of Mill stand, TCS & Grease System.
Jobs involve shifting of panel, erection , Laying of Cable, preparation of cable termination
schedule, Loop checking, I/O testing , Trouble shooting & HMI trouble shooting.
3) Done the Erection & commissioning of all stand Load cell
4) Recently done Hot & cold commissioning of above mentioned things.

Working in Shift as a Shift incharge in CSP Mill Electrical & Automation.
Handlong the Shift independently,Doing the planning in Shift for break down, also handling the manpower.
Doing the 5s in Finishing mill area.
2) Ispat Indutries Ltd, Mumbai India [5june 2006-16 June 2010]
Assistant Engineer, E&A, Rolling Mill
- Working as Asst Shift Incharge.
- To attend the running break downs in shift and rectifying the problems in
minimum time delay.
- Execution of Sap generated PM jobs (Y2/Y3/YA/Y1/Z1/ZB) Ypm-31c & its compliance, closing of PM notifications.
- Ensuring proper house keeping as per 5S principle & TPM activities.

3) Saptharishi Electronics enterprises [May 2005-1 June 2006]
Worked as a Jr. Engineer with SAPTARISHI ELECTRONICS ENTERPRISES,
Testing the electronics & Electrical component, & Trouble shooting. Also checking & doing
maintenance of AC motors.

Key Skills
Technical
- Synchronous Motors, Siemens Motor Drives, DC motors, Induction motors, Power & Distribution Transformers, VCB (Siemens & ABB), ACB, HT Breakers, HT Motors, HT Panels, LT Systems, LT Breakers, MCC Panels etc.
- FM TCS trouble shooting,
- Pneumatic control Valves, Control valves (FCV).
- Switches : Pressure Switches, Level Switches, Proximity Switches, Limit
Switches & Relays.
- Instruments : Position Transmitters, Temperature Transmitters (RTD), Pressure
Transmitter, Flow Transmitters, Load cell, Level Transmitters.
- Symadyn-D, PLC Cards, AC Drives, Drive Cards, Relay Panels, PLC Panels

[Guest]

Sivaprasad K C
Email : sivaprasadkc AT gmail.com
PROFESSIONAL PROFILE
A successful Automation Engineer looking to fill position with company needing an employee with the experience, drive and ability to help the organization achieves its goals.
OBJECTIVE
I am now looking to progress into a Management position within the Automation section. I am therefore keen to find a new and suitably challenging role within a market-leading organisation.
CURRENT STATUS (5th April 2008 till date)
Currently working as a Senior Engineer in M/S Ba’amer Electric, Jeddah, Saudi Arabia (from 5th April 2008 till date)- A company manufacturing PLC panels, SCADA Systems, MCC panels, Type tested panels, lighting panels with Siemens and Schneider range of products.
RESPONSIBILTIES
- In charge Of the Department
- Reporting Directly to Manager / Managing Director
- Acting Manager
- Managing Project engineers
- Requirement Control
- Discussions with client, Project Status, Approvals, certificates etc
- Designing Automation System
- Offer Preparation
- Finalizing the offer
- Purchase control
- Checking AutoCAD designs and control Circuits of MCC & PLC panels
- Project commissioning
- Manage Project to finish on time
- Target Achieving
PROJECTS UNDERTAKEN
Project : Arabian Cements, Rabigh, Jeddah, KSA
- Contractor : Al-Kawther Water Industries, Jeddah
- Project : Sea Water Treatment Plant
- System : Schneider Premium PLC (TSXP573634), Vijeo Citect SCADA
Responsibilities :
- Responsible for finalising the offer
- System Design and drawing
- PLC programming, SCADA screen developing
- Project commissioning
Project : Arabian Cements-Ready Mix Project, Rabigh, Jeddah, KSA
- Contractor : Al-Kawther Water Industries, Jeddah
- Project : Sea Water Treatment Plant
- System : Schneider Premium PLC (TSXP573634), Vijeo Citect SCADA
Responsibilities :
- Responsible for finalising the offer
- System Design and drawing
- PLC programming, SCADA screen developing
- Project commissioning
Project : King Fahad Air Base, Taif, KSA
- Contractor : Al-Kawther Water Industries, Jeddah
- Project : Raw Water Treatment Plant
- System : Mitsubishi FX 2NSeries PLC
Responsibilities :
- Responsible for finalising the offer
- System Design and drawing
- Project Managing
- Site testing and finalization
Project : Al Marai Foods, Western Bakeries.
- Contractor : Ba’amer Contracting, Jeddah
- Project : Generator Synchronization
- System : Siemens S7-313 C2DP,Genop
Responsibilities :
- Responsible for finalising the offer
- System Design
- Project Managing
- Site testing and finalization
Project : Al Marai Foods, Western Bakeries.
- Contractor : Ba’amer Contracting, Jeddah
- Project : Generator Synchronization
- System : Siemens S7-313 C2DP,Genop
Responsibilities:
- Responsible for finalising the offer
- System Design
- Project Managing
- Site testing and finalization
Project: Al-Batha, Western Bakeries.
- Contractor: Washnah Water Equipments, Jeddah
- Project: STP
- System: Schneider Premium , Advantys Solution, Vijeo Citect SCADA, Web Client
Responsibilities:
- Responsible for finalising the offer
- Ministry approval
- System Design
- Project Managing
- Site testing and finalization
Project: Jeddah Contingency Project, Al-Balad, Al-Kawther
- Contractor: National Water Company, Jeddah
- Project: STP
- System: Schneider Premium, 15” HMI, Blokset Type tested panel, VFD’s, Soft starters.
Responsibilities:
- Responsible for finalising the offer
- PLC design
- MCC-Blokset panel design verification and finalization
- PLC programming
- System Design
- Project Managing
- Site testing and finalization
Project: Jeddah Contingency Project, Al-Ruwais, Al-Kawther
- Contractor: National Water Company, Jeddah
- Project: STP
- System: Schneider Premium, 15” HMI, Blokset Type tested panel, VFD’s, Soft starters.
Responsibilities:
- Responsible for finalising the offer
- PLC design
- MCC-Blokset panel design verification and finalization
- PLC programming
- System Design
- Project Managing
- Site testing and finalization
Project: Jeddah Contingency Project, LT6 line Pumping station, Al-Kawther
- Contractor: National Water Company, Jeddah
- Project: STP
- System: Twido PLC, 3.5” HMI, Blokset Type tested panel, Soft starters.
Responsibilities:
- Responsible for finalising the offer
- PLC design
- MCC-Blokset panel design verification and finalization
- PLC programming
- System Design
- Project Managing
- Site testing and finalization
Project: National Foods (NFIC), Jeddah
- Contractor: Ba’amer Contracting , Jeddah
- Project: Generator Synchronization
- System: ComAp Generator Controller –IG NT MINT
Responsibilities:
- Responsible for finalising the offer
- System Design
- Programming
- Project Managing
- Site testing and finalization
Project: Pumping Station , Yanbu
- Contractor: Washnah Water Equipments, Jeddah
- Project: Pumping Station
- System: Twido PLC, Vijeo Citect SCADA, Soft starters
Responsibilities:
- Responsible for finalising the offer
- System Design
- Project Managing
- Site testing and finalization
SERVICE / BREAKDOWN CALLS
Service Call: Al-Marai, Western Bakeries, Jeddah
- System: Siemens PLC and TP
- Application: Wolf Packing Machine
Responsibilities:
- PLC program & Hardware troubleshooting
Service Call: Al-Marai, Western Bakeries, Jeddah
- System: Siemens PLC and TP
- Application: Sorian CIP
Responsibilities:
- PLC program & Hardware troubleshooting
Service Call: Al-Marai, Western Bakeries, Jeddah
- System: Siemens PLC and TP
- Application: Dinosa
Responsibilities:
- PLC program & Hardware troubleshooting
Service Call: Al-Marai, Western Bakeries, Jeddah
- System: Siemens PLC and TP
- Application: Alimec
Responsibilities:
- PLC program & Hardware troubleshooting
Service Call: Al-Hada Water, Jeddah
- System: Siemens S5
- Application: Packing Machine
Responsibilities:
PLC program & Hardware troubleshooting
Service Call: Makkah Water, Jeddah
- System: Telemechanique PLC
- Application: Atlas Compressor Controller
Responsibilities:
PLC program & Hardware troubleshooting
Service Call: National Foods (NFIC), Jeddah
- System: Siemens S5 PLC
- Application: Cheese Machine
Responsibilities:
PLC program & Hardware troubleshooting
Service Call: Makkah Water, Jeddah
- System: Siemens S7-200
- Application: Conveyor Line
Responsibilities:
PLC program & Hardware troubleshooting
Service Call: Middle East Paper Co (MEPCO), Jeddah
- System: Siemens S7-414
- Application: Paper Machine
Responsibilities:
PLC program & Hardware troubleshooting
PREVIOUS EXPERIENCE (1st Jan 2007 to 1st April 2008)
Worked 1.2 years as ‘Senior Engineer-Projects’ in ‘Proficient Automation and Controls Ltd’, Cochin, Kerala (from 1st Jan 2007 to 1st April 2008)- A company manufacturing PLC panels, SCADA Systems, VFD panels with Siemens range of products.
PROJECTS UNDERTAKEN
Project: Liquid Propulsion System Centre (LPSC-ISRO), Mahendragiri, India
- Project: Rocket Engine Testing
- System: Siemens S7 414-4H Redundant PLC system, Scalance Redundant Communication, WinCC SCADA stations, Redundant IO.
Responsibilities:
- Project partner
- Redundancy Checking
- SCADA configuration
- Communication configuration
- Project commissioning
Project: Merchem Chemicals, Panoli, India
- Project: Rubber Chemical-AutoClaves
- System: Siemens S7 313C2DP PLC system, WinCC SCADA station.
Responsibilities:
- Project Engineer
- PLC Programming
- SCADA Design & configuration
- Communication configuration
- Project commissioning
Project: AFDC, Kerala, India
- Project: Freeze Drying Machnie
- System: Siemens S5 115U PLC system, I-Fix SCADA station.
Responsibilities:
- Project Engineer
- PLC Programming
- SCADA Design & configuration
- Communication configuration
- Project commissioning
Project: Merchem Chemicals, Kerala, India
- Project: Rubber Chemical-AutoClaves
- System: Siemens S7 313C2DP PLC system, WinCC SCADA station.
Responsibilities:
- Project Engineer
- PLC Programming
- SCADA Design & configuration
- Communication configuration
- Project commissioning
Project: FCI, Kerala, India
- Project: FIAT EPAS Press
- System: Siemens S7 200 PLC system.
Responsibilities:
- Project Engineer
- PLC Programming
- Project commissioning
Project: AVT, Kerala, India
- Project: Spice Powder
- System: MM440.
Responsibilities:
- Project commissioning
EDUCATION AND QUALIFICATIONS
B-Tech: Electrical & Electronics 2006 Batch, R.I.T. Govt: Engineering College, Kerala
HSE: Biology+Mathematics, 2002 Batch, St. Marys, Kerala
SSLC: State Syllabus 2000 Batch, Hail Mary, Kerala
KEY SKILLS
- PLC Programming including software, communication, trouble shooting, design & configuration
- Siemens S5, S7 200, S7 300, S7400 series
- Schneider- Premium, M340, Twido, Zelio
- SCADA system
- WinCC, Vijeo Citect, I-Fix, Wonder ware, Wincc Flexible
- VFD system
- Siemens-Micromaster, Schneider Altivar
- Designing Tools
- AutoCAD, AutoCAD Electrical, PC Schematic
- IT
- Windows XP, MS Office-Trouble shooting, Tips & trics, Computer Hardware, Ethernet communication, Wireless
Email: sivaprasadkc AT gmail.com / sivaprasadkc AT yahoo.com

[Guest]

SAYED K. AHMED
E-Mail :- sayedabla AT gmail.com
Sayed.Ahmed AT almarai.com

_______________________________________________________________________________
OBJECTIVE :
To work for a company as an Automation engineer, offering a potential growth in the field of electrical, instrumentation & automation engineering field, to synchronize with the objectives of the organization, thereby contributing to the growth of the organization, and to have a bright career in the field of Automation, Control and Database Technologies.
Skilled with ability to analyze and interpret unique problems, with a combination of training experience and logical thinking to get the right solutions.
PROFESSIONAL :
Undergone Course of “Certified Automation Engineering (C.A.E)”from Prolific System & Technologies PVT.LTD. Pune. Which covers :
Programmable Logic Controllers (PLC)
- Allen Bradley, Mitsubishi, Siemens, Messung, etc.
Supervisory Control & data Acquisition (SCADA)
- Wonderware - Intouch
Human Machine Interface (HMI)
- Siemens OP7
A.C. & D.C. Drives
- Delta Drive
OVERSEAS EXPERIENCE :
Have been working for the company name Almarai as a “AUTOMATION TEAM MANAGER”, since 7th Oct. 2009 to be still dated
- Manage operation and maintenance with a self-directing team during shift to meet the internal customer requirement-ensuring adherence to the defined Safety and Quality.
- Co-ordinate the execution of planned preventive maintenance task to ensure equipments perform as required.
- Ensure corrective actions of all non-conformance/process deviation are effected immediately.
- Ensure full implementation of Safety Systems and safety practices and maintain GMP are conducted within the specified Quality Standards and parameters.
- Ensure that operational maintenance, calibration and verification are carried out and documented as specified.
- Handled functional areas such as Process Control Systems, Instrumentation, PLC’s for all equipments and Planned Preventive Maintenance of all process systems and equipment.

OVERSEAS EXPERIENCE :

Three years of work experience with the organization name Gulf Catering Co., Riyadh as “ ELECTRICAL SUPERVISOR” for calibration, trouble shooting, general Operation & maintenance of Electrical & automation control system, i.e. from 9th July -2003 to 7th Aug-2006.
DUTIES & RESPONSIBILITES :
- Executing planned preventive maintenance program as assigned in timely and efficient manner.
- Fault finding and troubleshooting of any fault and take corrective action.
- Ensure that all tasks are completed within the stipulated time
- All activities are carried out within the defined safety and quality standards.
- Document all the action taken against notification in SAP system
- To ensure compliance of quality procedures, by meeting site targets for continuous improvement within his department.
- Full understanding of equipment manuals and spare part specification.
- Conducting duties hygienically, efficiently and within the specified quality standards.
- Attending team briefings suggesting improvements and workable solutions to team performance.
INDIAN EXPERIENCE :
Have been worked for the company name Finearc System Pvt. Ltd., Pune as a “PROJECT CONTROL ENGINEER”, specialization in PLC, drives, control panel, electronic & electrical equipments in welding & Automation technology. Troubleshooting of electrical equipments such as sensors, Pneumatic & Hydraulic systems, Erection & Commissioning on site and I have been working from 2nd Sept. 2006 to 30th Aug. 2009
DUTIES & RESPONSIBILITES :
- Involved in Design, testing, installation and commissioning.
- Logic development & electrical design as per functional requirement
- Responsible for the Hardware selection of PLC, drives, HMI & I/O modules, etc.
- Deciding the Inputs/Outputs, designing & modification of electrical circuit diagram.
- Preparing electrical BOM (Bill of Material) for purchase.
- Trouble shooting of PLC, drive, Pneumatic & Hydraulic systems
- PLC Ladder Programming in software’s like : Allen Bradley, Mitsubishi, Siemens, Messung, etc
- Robot programming (Teaching, Application parameters handling)
- Interfacing of Robot with PLC based systems.
- Erection & Commissioning, handling front line at customer’s site.

EDUCATIONAL QUALIFICATION :
Academics :
I have completed my Diploma in “INSTRUMENTATION & CONTROL ENGG” from
“The State Govt.Employee’s Education society Ltd.” Tarihal, Hubli with the average of 57%.
I have done my SSLC from “St. Michaels High School” Hubli with Average of 59%.
Successfully completed the training in “ENGLISH TYPEWRITING” from “Unity Institute of Commerce” in the year 1997, with 1st Division.
ADDITIONAL SKILLS :
- Knowledge in computer programs such as Word & Excel.
- Good command over written & spoken English.
- Valid driving License.

[Guest]

SARFRAZ ALAM
E-Mail : sarfraz.cis AT gmail.com
Seeking assignments in Project Management / PLC & SCADA Programming with a growth oriented organisation; preferably in Automation industry.
Location Preference : Makkah / Jeddah
SYNOPSIS
- B.E. (Electrical) professional with nearly 2 years of experience in Project Management and PLC Programming.
- Currently serving at Basic Automation Solutions Pvt. Ltd., Faridabad as Automation Engineer.
- Demonstrated abilities in working on Programmable Logic Controllers, SCADA and HMI (Especially Rockwell Products).
- Skilful in executing and ensuring timely delivery of projects within cost parameters.
- Undertaken an academic project on ‘The Role of Mini & Micro Power Plants’.
- Completed Certified Automation Engineers Course (C.A.E.) from Prolific Systems & Technology, NOIDA.
- An effective communicator with exceptional relationship management skills with the ability to relate to people at any level of management.
ORGANISATIONAL SCAN
Since Aug’09 with Basic Automation Solutions Pvt. Ltd., Faridabad as Automation Engineer
Key Projects Handled :
Project #1
Organisation : Jotindra Steel & Tubes Limited, Faridabad.
Title : Development of Ladder Logic (Allen Bradley (Micrologix) & HMI Software for Tube Cutter System.
Project #2
Organisation : General Motor India, Halol, Gujarat.
Title : Commissioning of AEMS System and Development of Ladder Logic (Allen Bradley, Compact Logix), for a Hanging Conveyor System through Messaging between 6 Number of PLCs (All Compact Logix) via PowerComm (VAHLE). Modification of HMI PANEL VIEW 600 PLUS
Project #3
Organisation : Qatar Petroleum, Dukhan, Qatar.
Title : Modification of Ladder Logic (Allen Bradley - SLC) after Addition of a New Rack through RIO.
Project #4
Organisation : Malhotra Shaving Products, Hyderabad.
Title : Modification of Ladder Logic (Allen Bradley - PLC-5) as well as HMI Software for Blade Heating Machine (LES).
Project #5
Organisation : Allana Frigo Rifico, Ghaziabad.
Title : Modification of Ladder Logic (Allen Bradley (SLC) and SCADA Software for Bone Crushing Unit.
Project #6
Organisation : J S Engineering Ltd., Faridabad.
Title : Development of Ladder Logic (Allen Bradley - Micrologix) and HMI Software Crimping Machine.
Project #7
Organisation : Bhushan Steel Ltd., Cuttack.
Title : Modification of Ladder Logic (Allen Bradley - SLC) and SCADA Software for Dedusting System.
Project #8
Organisation : Alliance Printech, Faridabad.
Title : Development of Ladder Logic (Allen Bradley (Micrologix) as well as HMI Software for Paper Rolling Machine.
Project #9
Organisation : Ashoka Leyland, Rudrapur, Uttrakhand.
Title : Development of Ladder Logic for Conveyor Systems (Siemens S7-300).
Project #10
Organisation : Bhai Sunder Das Pvt. Ltd., Faridabad.
Title : Development of Ladder Logic (Allen Bradley (Micrologix-1400) as well as HMI Software for Mixing of Material.
Project #11
Organisation : Vishnu Sugar Mills, Kishanganj.
Title : Modification of SCADA for Melt Clarification System.
Project #12
Organisation : Malhotra Shaving Products, Hyderabad.
Title : Development of Ladder Logic Allen Bradley (Micrologix) as well as HMI Software for Blade Packeting Machine.
Project #13
Organisation : Sage Metals, Ghaziabad.
Title : Modification of Ladder Logic (Allen Bradley (SLC) of Die Casting Machine (320 Ton, 600 Ton, 700 Ton & 900 Ton).
Project #13
Organisation : Pennar Industries Ltd., Hyderabad.
Title : Development of Ladder Logic (Allen Bradley (Micrologix) and HMI Software for Crimping Machine.
TRAININGS ATTENDED
- C.A.E. from Prolific Systems & Technology, NOIDA in 2009.
- SCADA - Intouch
- MODICON (TSXMICRO) - PL7 PRO
- OMRON (CPM2A) - CX Programmer
- MITSUBISHI (FX1N) - GX Developer
- GE FANUC (VERSAMAX) - VERSAPRO
- S7-200 - MICROWIN
- S7-300 - SIMATIC MANAGER
- ALLEN BRADLEY (MICROLOGIX & SLC) - RS LOGIX500
- DRIVES (ALTIVER)
- HMI (AB) - Panel Builder
- Instrumentation & Panel Designing
- DCS (MICROSYS3200EC) - SYSDEV32, ONSPEC
ACADEMIC PROJECT
Title : The Role of Mini & Micro Power Plants 1 Month
ACADEMIA
- B.E. (Electrical) from R.P.S.I.T., Patna (Magadh University, Bodhgaya) in 2008 with 74% (Distinction).
- 12th from Oriental College, Patna (B.I.E.C., Patna) in 1998 with First Class.
- 10th from S.G.G. School, Patna (B.S.E.B., Patna) in 1996 with First Class.
EXTRAMURAL ENGAGEMENTS
- Actively took part in various social function activities.
- Functioned as an Active Member of Discipline Society at College Level.

[Guest]

Hello,
I am Ramzi Jabbarin from Palestine have a bachelor degree in electrical engineering(automation engineering branch), with two years of experience.
I hope that I can find a job at your company.
Curriculum Vitae
E-mail ramzijabareen AT yahoo.com
Ramzi K.Y. Jabbarin
Education :
Qualification Accumulative Average/Score Year Attended School/College/
University/ Institution
Bachelor degree in Electrical Engineering, 83 2008 Palestine Polytechnic University-Hebron
Tawjihi, 92.1 2003 Althahria Boy's Secondary School
Work Experience :
Company Name Position From To
Future Iron Pipes (FIP), Steel Pipe Coating Co. Electrical Engineer July,2009 November, 2011
Scope of Work :
- Perform operation and maintenance tasks for electrical equipments ranging from motors, transformers, variable speed drives and heaters.
- Responsible for instruments used for QC tasks.
- Inspection of all electrical works such as installation of high voltage, medium voltage, and low voltage switch gear, standard drawing, etc.
- Set technical direction including analysis of technical data and preparing recommendations for improvement.
- Preparation of specifications and data sheets of field devices
- Tender documentation and proposal comparisons.
Skills :
- Possess good communication and interpersonal skills
- ability to work within a team, under pressure, multi - task and for long hours
- Have an excellent research ability and study skills.
- Serious, hard working and eager to learn.
- Very good knowledge in machines programming by using PLC.
- Electrical Installations and maintenance.
- Competence in dealing with computer programs such as Microsoft Office programs (world, Excel, Power point) and internet explorer.
Languages :
Language Reading Writing Speaking
Arabic Mother Tongue
English Excellent Very Good Very Good
Objectives :
- To help a successful establishment or company expand further and to help myself grow further professionally, technically, and financially, to become an effective team player in a progressive organization or company.
- Desire to gain the necessary practical and academic experience in my specialization and convoy evolutions in this field , and thus use this experience to benefit my country and any company I may work in .

[Guest]

i am Electronics & communication engineer and also knowledge of plc, scada,drives etc

[Unregistered]

MD.ATHAR IQUBAL
EMail : athar_iqubal AT rediffmail.com

Senior Engineer :
At Honeywell Automation India Ltd,
B.E in Electronic Engineering , A hard working professional with over 8 years of experience in Process Automation & System Designing, Installation & Commissioning, Customer Services and Team Management .
Experience in successfully handling small & big Projects of DCS,SCADA.PLC,ESD ,Process Historian Data Systems & Field instruments .
Experienced in handling Service contracts for various customer in the region specially in IOCL refinery& HPCL petrochemicals.
Well versed with Honeywell TDC3000 DCS,Experion, ,SCADA and PLC, Graphics Design & erection and commissioning of various transmitter, sensors and control system.
Participating in emergency Drills, Hazard Analysis(HAZOP),Conducting Near Miss Reporting.
An effective communicator with excellent skills in building relationships. Possess strong analytical, problem solving and organizational abilities.

Professional Objective :
To advance with a company which specializes in providing high – end solutions/products using the latest technologies which releases & uses my technical knowledge & experience

KEY SKILLS :
Technical Service & support :
Remote Engineering & Services Site coordination Work Packaging DCS Diagnostics DCS Troubleshooting After Market Services
Carries out Preventive maintenance and corrective maintenance activities on DCS ,PLC,ESD Control Systems and SCADA system equipment and associated interfaces to ensure system availability for continuous production operation.
Develops and implement preventive and routine maintenance programs and procedures, and recommends modifications and enhancement in order to improve the reliability and availability of the systems.
Project Engineering for DCS / PLC/ESD System :
Preparation of quality plan through the application of software development methodology based on project life cycle mode
Project planning, design, engineering, material & resources management, execution, FAT, installation, commissioning and SAT
Requirement and functional design specifications
Panel and Field Wiring
Factory acceptance test specifications
Documentation and Project Engineering,

Network Engineering :
Setting up communication network and development system , & Industrial Networking (TCP/IP, LAN, Firewall, Cisco Switches, Fiber Optics, Data Linc Modems & Radio Communication). Security and Access Controls.
Control System Engineering :
(SCADA, PLC, DCS, ESD and PHD Historian Systems)Like :LCN graphics, Gus graphics, HMI graphics,
HPM,APM,LM.FSC,SM,TDC3000,EXPERION SERVER,C300,C200,ML200,PHD SERVER,&ESERVER etc
Programmable control system configuration – specification of processors, operator and management work stations
Supervisory control system software (platform) specifications
Instrumentation detailed engineering – data sheets, wiring and interconnection diagrams
I/O lists, system architecture and block diagrams
Specifications of auxiliary devices local operator terminals and panels
Software design, development and implementation
Study and validation of customer / EPC inputs
Asset and Alarm management
P&ID Reconciliation & Preparation of engineering database
Setting up communication network and development system
Security and Access Controls

Performance trials (FAT / SAT) :
Project planning, design, engineering, material & resources management, execution, FAT, installation, commissioning and SAT.
P & ID takeoff : P&ID Reconciliation & Preparation of engineering database
Experience of Field Instrumentation.
Exposure to Industry standard – 3rd Party interface protocol such OPC & MOD BUS.
Experience in tendering, documentation and negotiation for contract largest project awarded to Honeywell Automation India Ltd .

PROFESSIONAL EXPERIENCE :
Honeywell Automation India Ltd –Current Employer
Sr. Engineer
Work Profile :
Undertaking the engineering, revamping, commissioning & maintenance of Honeywell DCS/PLC/ESD/SCADA Specially in TDC 3000,EST&ESVT ,HPM,APM, LM,FSC,SM controllers and Experion C300,C200,ML200 systems at client site as well as at our works.
Handling the Annual Maintenance Contract and Customer Service related functions
Attending to system breakdown and preventive maintenance calls
Complete execution from Project engineering to execution of new project and third party interface with System.
Complete Execution from Inquiry to execution of AddOn and revamping projects.
Managing the migration of systems to higher versions
Checking for system performance with respect to loading and overruns.

Responsibilities :
Project planning, design, engineering, material & resources management, execution, FAT, installation, commissioning and SAT
Meetings and discussions with customer
Software design, development and implementation
Systems engineering and implementation
Study and validation of customer / EPC inputs
Asset and alarm management
P&ID Reconciliation & Preparation of engineering database
Setting up communication network and development system
DCS installation, integration, startup, trouble shooting
Site coordination
Work Packaging
DCS Diagnostics and Troubleshooting
After Market Services and Customer Support
Design, Engineering, Implementation, Project Management & technical support for Honeywell Systems, Instrumentation Systems & Industrial Networking (TCP/IP, LAN, Firewall, Fiber Optics, Data Linc Modems & Radio Communication)..
Looking after all the regional sites ..
Release upgradation; add on jobs execution & integration of two different system. .
Projects for Process Plants (Aluminum, Fertilizers, Polymers, Chemical, Power, Oil and Gas etc.)

Siemens System House (Jupiter Hitech System) Jamshedpur. :
From 2004 to 2007 as an asst Project Engineer .
Design, Development and Testing, Erection, Installation & Commissioning and Trouble Shooting of .Siemens System.
Excellent Technical and programming skills in SIEMENS S7200 ,S7300 & S7400 PLC .
Knowledge of HMI ,SCADA functionally expertise in WinCC.
Knowledge of installation, Commissioning, maintenance & troubleshooting of SIEMENS S5,S7200,S7300,S7400 PLC,Drives based systems & interface with SCADA and HMI.

PROJECT HIGHLIGHTS :
1) Project : OFFSITE & UTILITY PACKAGE (EPCC4).
Client : TECHNIP INDIA LTD.
Consultant : LURGI INDIA LTD.
End User : INDIAN OIL CORPORATION LTD, HALDIA
Environment : Honeywell , TDC3000 DCS system ,
Role : Sr. Engineer project for Installation and Commissioning of
Honeywell Systems.
Responsibilities :
Design, Engineering, Implementation, Project Management
Develop Logic and graphics in TDC 3000
Installation , Commissioning and testing HPM controller
Design the LCN graphics in TDC 3000 System

2) Project : Up gradation of PlantSacp SCADA and New PLC for Chain 1 & 2
And integration with existing SCADA at DM Plant.
Organization : IOCL REFINERY, GOWAHATI,
Environment : Honeywell Experion server and LM 62335.
Role : Sr. Engineer project for Installation and Commissioning of
Honeywell Systems.
Responsibilities :
Design, Engineering, Implementation, Project Management
Develop HMI graphics
Installation , Commissioning and testing of the Honeywell Experion server and station
Plantscap SCADA is up graded to advanced Honeywell Experion Scada with One no of redundant Server.

3) Project : NAPTHA CRACKERS ASSOCIATED UNITEXPANSION
Client : HPCL PETROCHEMICALS LTDHALDIA
Consultant : LURGI INDIA LTD.
End User : HPCL PETROCHEMICALS LTDHALDIA
Environment : The project broadly includes migration of the 8 existing GUS’s to 8 EST’s and 1 ESVT, on Honeywell’s latest EPKS 301.1 technology. Besides this the controller augmentation includes addition of 1 HPM (with 3 marshalling cabinets).

Role : Sr. Engineer project for Design ,Installation and
Commissioning of Honeywell Systems.
Responsibilities :
Design, Engineering, Implementation, Project Management
Develop Logic and graphics in TDC 3000.
Installation , Commissioning and testing HPM controller
Design the HMI graphics in TDC 3000 System.

4) Project : Integration of Hydrocom compressor control system in DCS
( TDC 3000 System) and development of logic and graphics.
Organization : IOCL REFINERY, BARUANI,
Environment : Honeywell TDC 3000 and HPM ,LM 62335.
Role : Sr. Engineer project for Installation and Commissioning of
Honeywell Systems.
Responsibilities :
Design, Engineering, Implementation, Project Management
Develop logic and lcn graphics.
Develop Logic and graphics in TDC 3000.
Installation , Commissioning and testing HPM controller
Design the HMI graphics in TDC 3000 System,

5) Organization : TATA POWER, JOJOBEDA, JAMSHEDPUR
Project : Old Coal Handling Plant PLC was changed with DCS and Wagon Tripler
1&2 was hooked up with the new DCS.
Environment : :Honeywell Experion server and LM 62335.
Role :Sr. Engineer project for Installation and Commissioning of
Honey well Systems.
Responsibilities : a. Design, Engineering, Implementation, Project Management .b .Developed HMI graphics c. Installation, Commissioning and testing of the Honeywell Experion server and station. d. Plantscap SCADA is up graded to advanced Honeywell Experion Scada with One no of redundant Server.

ACHIEVEMENTS & AWARDS :
Notable Accomplishments.
F10 Award :For SPARES FOR ML200 LD#2 VESSEL AT TATA STEEL
Bravo Star February 2011 :For fabulous job Done in modifying the ladder logic and commissioning of LM project.
Bravo Star February 2010 : Excellent technical skills to complete the commissioning and sign off of the Up gradation of the project completing before schedule period.
BRAVO Peer Star Award May 2008 : (Honeywell Internal Employee Award) for the successful execution of New HPM installation ,logic & Modbus connectivity with third party system..
Team Award Q1 2010 :In recognition of a high degree of team spirit and hard work demonstrated in Migration Project.
Team Award Q1 2010 : In recognition of a high degree of team spirit and hard work demonstrated in DCS Segregation of Process Based System .
Received “Tata Steel Millennium Scholarship” for pursuing B.E for 4 years from 2000 to 2004 for B.E. in Electronics Engineering.

Educational Qualification:
Degree : BE ( Electronic Engineering)
University : Nagpur University.
In Year : 2004
Class : First Class.

Personal Profile :
Date Of Birth : 8th MAY 1978
Gender : Male
Language : English & Hindi.
Nationality : Indian.
Email : athar_iqubal AT rediffmail.com

[Unregistered]

Myself completed b.tech EEE in 012 and along with electrical design engineering and automation plc scada course certification holder. But without experience can I apply for job in qatar?